diff options
Diffstat (limited to 'src/mainboard/via/epia-n/Config.lb')
| -rw-r--r-- | src/mainboard/via/epia-n/Config.lb | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/src/mainboard/via/epia-n/Config.lb b/src/mainboard/via/epia-n/Config.lb new file mode 100644 index 0000000000..d524c88281 --- /dev/null +++ b/src/mainboard/via/epia-n/Config.lb @@ -0,0 +1,197 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 VIA Technologies, Inc. +## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 + +include /config/nofailovercalculation.lb + +## +## Set all of the defaults for an x86 architecture +## +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end + +#object vgabios.o + +if CONFIG_HAVE_MP_TABLE object mptable.o end + +if CONFIG_HAVE_ACPI_TABLES +#acpi_create_fadt is located in VT8237R code + object dsdt.o + object acpi_tables.o +end +makerule ./failover.E + depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./failover.inc + depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" +end +makerule ./auto.E + depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" +end +makerule ./auto.inc + depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" +end + +## +## Build our 16 bit and 32 bit coreboot entry code +## +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds + +## +## Build our reset vector (This is where coreboot is entered) +## +if CONFIG_USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +### +### This is the early phase of coreboot startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if CONFIG_USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## + +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit ./auto.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc + +dir /pc80 +config chip.h + +chip northbridge/via/cn400 # Northbridge + + device apic_cluster 0 on # APIC cluster + chip cpu/via/model_c3 # VIA C3 + device apic 0 on end # APIC + end + end + + device pci_domain 0 on # PCI domain + device pci 0.0 on end # AGP Bridge + device pci 0.1 on end # Error Reporting + device pci 0.2 on end # Host Bus Control + device pci 0.3 on end # Memory Controller + device pci 0.4 on end # Power Management + device pci 0.7 on end # V-Link Controller + device pci 1.0 on end # PCI Bridge + chip southbridge/via/vt8237r # Southbridge + # Enable both IDE channels. + register "ide0_enable" = "1" + register "ide1_enable" = "1" + # Both cables are 40pin. + register "ide0_80pin_cable" = "0" + register "ide1_80pin_cable" = "0" + device pci f.0 on end # IDE/SATA + device pci f.1 on end # IDE + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 11.0 on # Southbridge LPC + chip superio/winbond/w83697hf # Super I/O + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.6 off # IR Port + io 0x60 = 0x000 + end + device pnp 2e.7 off # GPIO 1 + io 0x60 = 0x201 # 0x201 + end + device pnp 2e.8 off # GPIO 5 + io 0x60 = 0x330 # 0x330 + end + device pnp 2e.9 off # GPIO 2, 3,and 4 + io 0x60 = 0x000 # + end + device pnp 2e.a off # ACPI + io 0x60 = 0x000 # + end + device pnp 2e.b on # HWM + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 11.5 off end # AC'97 audio + # device pci 11.6 off end # AC'97 Modem + device pci 12.0 on end # Ethernet + end + end +end |