summaryrefslogtreecommitdiff
path: root/src/mainboard/tyan
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/tyan')
-rw-r--r--src/mainboard/tyan/s2850/Options.lb6
-rw-r--r--src/mainboard/tyan/s2875/Options.lb6
-rw-r--r--src/mainboard/tyan/s2880/Options.lb6
-rw-r--r--src/mainboard/tyan/s2881/Options.lb6
-rw-r--r--src/mainboard/tyan/s2882/Options.lb6
-rw-r--r--src/mainboard/tyan/s2885/Options.lb6
-rw-r--r--src/mainboard/tyan/s2891/Options.lb8
-rw-r--r--src/mainboard/tyan/s2892/Options.lb8
-rw-r--r--src/mainboard/tyan/s2895/Options.lb8
-rw-r--r--src/mainboard/tyan/s4880/Options.lb6
-rw-r--r--src/mainboard/tyan/s4882/Options.lb6
11 files changed, 36 insertions, 36 deletions
diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb
index d6db7c1c74..ca1aa186c7 100644
--- a/src/mainboard/tyan/s2850/Options.lb
+++ b/src/mainboard/tyan/s2850/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb
index 99a018c4e9..092aefb98c 100644
--- a/src/mainboard/tyan/s2875/Options.lb
+++ b/src/mainboard/tyan/s2875/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -123,7 +123,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -136,7 +136,7 @@ default CONFIG_PCI_ROM_RUN=1
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb
index 23b239afb4..bcb7a1e4c2 100644
--- a/src/mainboard/tyan/s2880/Options.lb
+++ b/src/mainboard/tyan/s2880/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=0
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb
index bb92ecfd30..b1e5022c31 100644
--- a/src/mainboard/tyan/s2881/Options.lb
+++ b/src/mainboard/tyan/s2881/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
#default CONFIG_CONSOLE_VGA=1
@@ -135,7 +135,7 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb
index 5dec67a947..da382282c9 100644
--- a/src/mainboard/tyan/s2882/Options.lb
+++ b/src/mainboard/tyan/s2882/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -122,7 +122,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -135,7 +135,7 @@ default CONFIG_PCI_ROM_RUN=1
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb
index dcff37450f..5ca7df6a34 100644
--- a/src/mainboard/tyan/s2885/Options.lb
+++ b/src/mainboard/tyan/s2885/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -139,7 +139,7 @@ default CONFIG_PCI_ROM_RUN=1
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1
default APIC_ID_OFFSET=0x10
diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb
index 9018364663..366b745151 100644
--- a/src/mainboard/tyan/s2891/Options.lb
+++ b/src/mainboard/tyan/s2891/Options.lb
@@ -53,7 +53,7 @@ uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM
@@ -69,7 +69,7 @@ uses CONFIG_PCI_64BIT_PREF_MEM
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
-uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_LB_MEM_TOPK
@@ -137,7 +137,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support
default K8_HT_FREQ_1G_SUPPORT=1
@@ -149,7 +149,7 @@ default HT_CHAIN_UNITID_BASE=0x0
#default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0)
-default K8_SB_HT_CHAIN_ON_BUS0=2
+default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1)
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb
index 7000126a5d..30e6d617c2 100644
--- a/src/mainboard/tyan/s2892/Options.lb
+++ b/src/mainboard/tyan/s2892/Options.lb
@@ -53,7 +53,7 @@ uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM
@@ -63,7 +63,7 @@ uses CONFIG_USE_INIT
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
-uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
## ROM_SIZE is the size of boot ROM that this board will use.
@@ -129,7 +129,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support
default K8_HT_FREQ_1G_SUPPORT=1
@@ -141,7 +141,7 @@ default HT_CHAIN_UNITID_BASE=0x0
#default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0)
-default K8_SB_HT_CHAIN_ON_BUS0=2
+default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1)
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb
index c3f8ba3f8c..cd367ad029 100644
--- a/src/mainboard/tyan/s2895/Options.lb
+++ b/src/mainboard/tyan/s2895/Options.lb
@@ -52,7 +52,7 @@ uses CONFIG_GDB_STUB
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses K8_HT_FREQ_1G_SUPPORT
uses USE_DCACHE_RAM
@@ -66,7 +66,7 @@ uses LIFT_BSP_APIC_ID
uses HT_CHAIN_UNITID_BASE
uses HT_CHAIN_END_UNITID_BASE
-uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_ON_BUS0
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
## ROM_SIZE is the size of boot ROM that this board will use.
@@ -134,7 +134,7 @@ default CONFIG_LOGICAL_CPUS=1
#default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#Opteron K8 1G HT Support
default K8_HT_FREQ_1G_SUPPORT=1
@@ -146,7 +146,7 @@ default HT_CHAIN_UNITID_BASE=0x0
#default HT_CHAIN_END_UNITID_BASE=0x0
#make the SB HT chain on bus 0, default is not (0)
-default K8_SB_HT_CHAIN_ON_BUS0=2
+default SB_HT_CHAIN_ON_BUS0=2
##only offset for SB chain?, default is yes(1)
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb
index 9cc8fc84f8..9e74b11214 100644
--- a/src/mainboard/tyan/s4880/Options.lb
+++ b/src/mainboard/tyan/s4880/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -139,7 +139,7 @@ default CONFIG_PCI_ROM_RUN=1
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1
default APIC_ID_OFFSET=0x10
diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb
index 57e10153a1..cd31cfed6b 100644
--- a/src/mainboard/tyan/s4882/Options.lb
+++ b/src/mainboard/tyan/s4882/Options.lb
@@ -52,7 +52,7 @@ uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
-uses K8_HW_MEM_HOLE_SIZEK
+uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
@@ -126,7 +126,7 @@ default CONFIG_LOGICAL_CPUS=1
default CONFIG_CHIP_NAME=1
#1G memory hole
-default K8_HW_MEM_HOLE_SIZEK=0x100000
+default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
#default CONFIG_CONSOLE_VGA=1
@@ -139,7 +139,7 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
-default CONFIG_USE_INIT=1
+default CONFIG_USE_INIT=0
default ENABLE_APIC_EXT_ID=1
default APIC_ID_OFFSET=0x10
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 17:47:29 +0000