diff options
Diffstat (limited to 'src/mainboard/tyan')
55 files changed, 276 insertions, 276 deletions
diff --git a/src/mainboard/tyan/Kconfig b/src/mainboard/tyan/Kconfig index 93b6d9d4c2..cd9646b38c 100644 --- a/src/mainboard/tyan/Kconfig +++ b/src/mainboard/tyan/Kconfig @@ -21,7 +21,7 @@ choice prompt "Mainboard model" depends on VENDOR_TYAN - + source "src/mainboard/tyan/s1846/Kconfig" source "src/mainboard/tyan/s2735/Kconfig" source "src/mainboard/tyan/s2850/Kconfig" diff --git a/src/mainboard/tyan/s2735/Kconfig b/src/mainboard/tyan/s2735/Kconfig index a0f739c071..a387d1a4ba 100644 --- a/src/mainboard/tyan/s2735/Kconfig +++ b/src/mainboard/tyan/s2735/Kconfig @@ -26,12 +26,12 @@ config DCACHE_RAM_BASE hex default 0xcf000 depends on BOARD_TYAN_S2735 - + config DCACHE_RAM_SIZE hex default 0x1000 depends on BOARD_TYAN_S2735 - + config MAINBOARD_PART_NUMBER string default "S2735" diff --git a/src/mainboard/tyan/s2735/cmos.layout b/src/mainboard/tyan/s2735/cmos.layout index ccda70c808..608f02867c 100644 --- a/src/mainboard/tyan/s2735/cmos.layout +++ b/src/mainboard/tyan/s2735/cmos.layout @@ -30,8 +30,8 @@ entries 388 4 r 0 reboot_bits 392 3 e 5 baud_rate 395 1 e 2 hyper_threading -396 1 e 1 thermal_monitoring -397 1 e 1 remap_memory_high +396 1 e 1 thermal_monitoring +397 1 e 1 remap_memory_high 400 1 e 1 power_on_after_fail 412 4 e 6 debug_level 416 4 e 7 boot_first diff --git a/src/mainboard/tyan/s2735/devicetree.cb b/src/mainboard/tyan/s2735/devicetree.cb index 8ad5e0ecac..1e8b12a790 100644 --- a/src/mainboard/tyan/s2735/devicetree.cb +++ b/src/mainboard/tyan/s2735/devicetree.cb @@ -5,7 +5,7 @@ chip northbridge/intel/e7501 device pci 2.0 on chip southbridge/intel/i82870 device pci 1c.0 on end - device pci 1d.0 on + device pci 1d.0 on device pci 1.0 on end # intel lan device pci 1.1 on end end @@ -20,7 +20,7 @@ chip northbridge/intel/e7501 device pci 1d.2 on end device pci 1d.3 on end device pci 1d.7 on end - device pci 1e.0 on + device pci 1e.0 on device pci 1.0 on end # intel lan 10/100 device pci 2.0 on end # ati end @@ -56,7 +56,7 @@ chip northbridge/intel/e7501 io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI diff --git a/src/mainboard/tyan/s2735/irq_tables.c b/src/mainboard/tyan/s2735/irq_tables.c index 4f6eb306dc..036b8d0cb0 100644 --- a/src/mainboard/tyan/s2735/irq_tables.c +++ b/src/mainboard/tyan/s2735/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s2735/mptable.c b/src/mainboard/tyan/s2735/mptable.c index 6a73c6dc88..cde5c4e3b4 100644 --- a/src/mainboard/tyan/s2735/mptable.c +++ b/src/mainboard/tyan/s2735/mptable.c @@ -48,18 +48,18 @@ static void *smp_write_config_table(void *v) res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 0x09, 0x20, res->base); - } + } } dev = dev_find_slot(1, PCI_DEVFN(0x1c,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, 0x0a, 0x20, res->base); - } + } } } /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# -*/ +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x8, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x1, 0x8, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, 0x5, 0x0, 0x8, 0x2); @@ -149,7 +149,7 @@ Compatibility Bus Address predefined range: 0x00000000-- Compatibility Bus Address bus ID: 0 address modifier: add - predefined range: 0x00000001 // There is no extension information... + predefined range: 0x00000001 // There is no extension information... */ /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c index f581de431e..de3124cb90 100644 --- a/src/mainboard/tyan/s2735/romstage.c +++ b/src/mainboard/tyan/s2735/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -50,7 +50,7 @@ void main(unsigned long bist) .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 }, }, }; - + if (bist == 0) { enable_lapic(); } diff --git a/src/mainboard/tyan/s2850/devicetree.cb b/src/mainboard/tyan/s2850/devicetree.cb index 264f8c7df6..98e6a28746 100644 --- a/src/mainboard/tyan/s2850/devicetree.cb +++ b/src/mainboard/tyan/s2850/devicetree.cb @@ -1,9 +1,9 @@ chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 device pci 18.0 on # LDT0 @@ -51,7 +51,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -63,7 +63,7 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on + device pci 1.3 on chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end @@ -82,14 +82,14 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2850/irq_tables.c b/src/mainboard/tyan/s2850/irq_tables.c index 8c7e681ec2..d1179dcfae 100644 --- a/src/mainboard/tyan/s2850/irq_tables.c +++ b/src/mainboard/tyan/s2850/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c index 0d4d6f9bc1..51c060126f 100644 --- a/src/mainboard/tyan/s2850/mptable.c +++ b/src/mainboard/tyan/s2850/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -90,8 +90,8 @@ static void *smp_write_config_table(void *v) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; - } - else { + } + else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8111_1 = 2; @@ -110,12 +110,12 @@ static void *smp_write_config_table(void *v) #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); @@ -133,7 +133,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (2<<2)|3, apicid_8111, 0x13); - + //On Board AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); diff --git a/src/mainboard/tyan/s2850/romstage.c b/src/mainboard/tyan/s2850/romstage.c index 6fbafa90cb..4e75e36832 100644 --- a/src/mainboard/tyan/s2850/romstage.c +++ b/src/mainboard/tyan/s2850/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -114,7 +114,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -125,7 +125,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2875/devicetree.cb b/src/mainboard/tyan/s2875/devicetree.cb index badb881777..edd4f6f784 100644 --- a/src/mainboard/tyan/s2875/devicetree.cb +++ b/src/mainboard/tyan/s2875/devicetree.cb @@ -6,7 +6,7 @@ chip northbridge/amd/amdk8/root_complex end device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8151 # the on/off keyword is mandatory @@ -55,7 +55,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -73,15 +73,15 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2875/irq_tables.c b/src/mainboard/tyan/s2875/irq_tables.c index db30d686c8..d08aa6ca09 100644 --- a/src/mainboard/tyan/s2875/irq_tables.c +++ b/src/mainboard/tyan/s2875/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s2875/mptable.c b/src/mainboard/tyan/s2875/mptable.c index 77afde6abf..c2a7012f13 100644 --- a/src/mainboard/tyan/s2875/mptable.c +++ b/src/mainboard/tyan/s2875/mptable.c @@ -28,7 +28,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -104,15 +104,15 @@ static void *smp_write_config_table(void *v) if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); - + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8151_1 = 2; } - - + + } /*Bus: Bus ID Type*/ @@ -126,11 +126,11 @@ static void *smp_write_config_table(void *v) #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(1); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -156,7 +156,7 @@ static void *smp_write_config_table(void *v) // AGP Display Adapter smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10); -// Onboard Serial ATA +// Onboard Serial ATA smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x05<<2)|0, apicid_8111, 0x13); //Onboard Firewire smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x11); diff --git a/src/mainboard/tyan/s2875/romstage.c b/src/mainboard/tyan/s2875/romstage.c index 274f8dc7ca..ead3655fae 100644 --- a/src/mainboard/tyan/s2875/romstage.c +++ b/src/mainboard/tyan/s2875/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -135,7 +135,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2880/devicetree.cb b/src/mainboard/tyan/s2880/devicetree.cb index 122648e137..97dcae866a 100644 --- a/src/mainboard/tyan/s2880/devicetree.cb +++ b/src/mainboard/tyan/s2880/devicetree.cb @@ -6,7 +6,7 @@ chip northbridge/amd/amdk8/root_complex end device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory @@ -66,7 +66,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -84,15 +84,15 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2880/irq_tables.c b/src/mainboard/tyan/s2880/irq_tables.c index 78c12016b4..19149df142 100644 --- a/src/mainboard/tyan/s2880/irq_tables.c +++ b/src/mainboard/tyan/s2880/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -37,5 +37,5 @@ const struct irq_routing_table intel_irq_routing_table = { }; unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + return copy_pirq_routing_table(addr); } diff --git a/src/mainboard/tyan/s2880/mptable.c b/src/mainboard/tyan/s2880/mptable.c index a8f3859d7b..94a150b031 100644 --- a/src/mainboard/tyan/s2880/mptable.c +++ b/src/mainboard/tyan/s2880/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -89,14 +89,14 @@ static void *smp_write_config_table(void *v) printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } - + /* 8111 */ dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } + bus_isa++; + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); @@ -134,14 +134,14 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); @@ -165,7 +165,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -179,7 +179,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); @@ -205,7 +205,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, apicid_8131_1, 0x2);// -//Slot 4 PCIX 100/66 +//Slot 4 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s2880/romstage.c b/src/mainboard/tyan/s2880/romstage.c index 7c0e4f2a2c..f75c541b9c 100644 --- a/src/mainboard/tyan/s2880/romstage.c +++ b/src/mainboard/tyan/s2880/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -125,7 +125,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -136,7 +136,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2881/devicetree.cb b/src/mainboard/tyan/s2881/devicetree.cb index 3c1f5bc276..47b5d37775 100644 --- a/src/mainboard/tyan/s2881/devicetree.cb +++ b/src/mainboard/tyan/s2881/devicetree.cb @@ -8,11 +8,11 @@ chip northbridge/amd/amdk8/root_complex chip northbridge/amd/amdk8 device pci 18.0 on end # LDT0 device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on + device pci 0.0 on device pci 9.0 on end # Broadcom 5704 device pci 9.1 on end device pci a.0 on end # Adaptic @@ -65,7 +65,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -77,13 +77,13 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on + device pci 1.3 on chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end - end + end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end end @@ -120,12 +120,12 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end end diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index 758e3d809d..562ba935d8 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -23,7 +23,7 @@ unsigned apicid_8111 ; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -35,7 +35,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, // 0x20202020, @@ -71,7 +71,7 @@ void get_bus_conf(void) } get_sblk_pci1234(); - + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; sbdn3 = sysconf.hcdn[0] & 0xff; @@ -119,8 +119,8 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index af66ba9730..b53a9923a7 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,11 +12,11 @@ #include <cpu/amd/amdk8_sysconf.h> -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -62,22 +62,22 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_8111_0; pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1022; pirq->rtr_device = 0x746b; pirq->miniport_data = 0; memset(pirq->rfu, 0, sizeof(pirq->rfu)); - + pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge @@ -88,11 +88,11 @@ unsigned long write_pirq_routing_table(unsigned long addr) // pirq_info++; slot_num++; pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index 5866577ce4..773f2540a4 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -59,7 +59,7 @@ static void adt7463_init(device_t dev) result = smbus_write_byte(adt7463, 0x5e, 0xc2); /* Make sure that our fans never stop when temp. falls below Tmin, - * but rather keep going at minimum duty cycle (applies to automatic + * but rather keep going at minimum duty cycle (applies to automatic * fan control mode only). */ result = smbus_write_byte(adt7463, 0x62, 0xc0); diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index ca75c51a93..a51384c641 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -30,7 +30,7 @@ static void *smp_write_config_table(void *v) unsigned char bus_num; int i; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -51,7 +51,7 @@ static void *smp_write_config_table(void *v) smp_write_processors(mc); get_bus_conf(); - + /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); { @@ -82,7 +82,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -96,7 +96,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + //8111 LPC ???? smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|0, apicid_8111, 0x13); diff --git a/src/mainboard/tyan/s2881/resourcemap.c b/src/mainboard/tyan/s2881/resourcemap.c index cecb790795..23ab936a5b 100644 --- a/src/mainboard/tyan/s2881/resourcemap.c +++ b/src/mainboard/tyan/s2881/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s2881_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s2881_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s2881_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c index 1310c8e99b..0a63486ffb 100644 --- a/src/mainboard/tyan/s2881/romstage.c +++ b/src/mainboard/tyan/s2881/romstage.c @@ -3,7 +3,7 @@ #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 #endif - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -117,7 +117,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2882/devicetree.cb b/src/mainboard/tyan/s2882/devicetree.cb index d563232b2d..b8cbce2858 100644 --- a/src/mainboard/tyan/s2882/devicetree.cb +++ b/src/mainboard/tyan/s2882/devicetree.cb @@ -7,7 +7,7 @@ chip northbridge/amd/amdk8/root_complex device pci_domain 0 on chip northbridge/amd/amdk8 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 0, link 0 == LDT 0 chip southbridge/amd/amd8131 # the on/off keyword is mandatory @@ -67,7 +67,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -80,13 +80,13 @@ chip northbridge/amd/amdk8/root_complex device pci 1.1 on end device pci 1.2 on end device pci 1.3 on end - device pci 1.3 on + device pci 1.3 on # chip drivers/generic/generic #dimm 0-0-0 # device i2c 50 on end # end # chip drivers/generic/generic #dimm 0-0-1 # device i2c 51 on end -# end +# end # chip drivers/generic/generic #dimm 0-1-0 # device i2c 52 on end # end @@ -111,11 +111,11 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index 3107ac8a87..4ddd63eecb 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -63,7 +63,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -76,11 +76,11 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) return 0; } -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -162,15 +162,15 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_chain_0; pirq->rtr_devfn = (4<<3)|3; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1022; pirq->rtr_device = 0x746b; @@ -186,7 +186,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3)); if (dev) { /* initialize PCI interupts - these assignments depend - on the PCB routing of PINTA-D + on the PCB routing of PINTA-D PINTA = IRQ5 PINTB = IRQ9 @@ -202,7 +202,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - + printk(BIOS_DEBUG, "setting Onboard AMD USB \n"); static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); @@ -279,16 +279,16 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info++; slot_num++; #endif -#if 0 +#if 0 //?? what's this? write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0); pirq_info++; slot_num++; #endif - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c index f1d7a27179..43ccef6276 100644 --- a/src/mainboard/tyan/s2882/mptable.c +++ b/src/mainboard/tyan/s2882/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -95,8 +95,8 @@ static void *smp_write_config_table(void *v) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; - } - else { + } + else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; @@ -137,9 +137,9 @@ static void *smp_write_config_table(void *v) #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; @@ -163,7 +163,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -180,7 +180,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|3, apicid_8111, 0x13); - + //On Board AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); @@ -209,7 +209,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// -//Slot 4 PCIX 100/66 +//Slot 4 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c index c49dff9f10..d8816d4cff 100644 --- a/src/mainboard/tyan/s2882/romstage.c +++ b/src/mainboard/tyan/s2882/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -129,7 +129,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s2885/devicetree.cb b/src/mainboard/tyan/s2885/devicetree.cb index f8dc2215d9..7cdc728fbb 100644 --- a/src/mainboard/tyan/s2885/devicetree.cb +++ b/src/mainboard/tyan/s2885/devicetree.cb @@ -14,11 +14,11 @@ chip northbridge/amd/amdk8/root_complex end end device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on + device pci 0.0 on device pci 9.0 on end # broadcom 5703 end device pci 0.1 on end @@ -67,7 +67,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -82,36 +82,36 @@ chip northbridge/amd/amdk8/root_complex device pci 1.3 on chip drivers/generic/generic #dimm 0-0-0 device i2c 50 on end - end + end chip drivers/generic/generic #dimm 0-0-1 device i2c 51 on end - end + end chip drivers/generic/generic #dimm 0-1-0 device i2c 52 on end - end + end chip drivers/generic/generic #dimm 0-1-1 device i2c 53 on end - end + end chip drivers/generic/generic #dimm 1-0-0 device i2c 54 on end - end + end chip drivers/generic/generic #dimm 1-0-1 device i2c 55 on end end chip drivers/generic/generic #dimm 1-1-0 device i2c 56 on end - end + end chip drivers/generic/generic #dimm 1-1-1 device i2c 57 on end - end + end end # acpi device pci 1.5 on end device pci 1.6 off end register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end @@ -119,9 +119,9 @@ chip northbridge/amd/amdk8/root_complex end #pci_domain -# chip drivers/generic/debug +# chip drivers/generic/debug # device pnp 0.0 off end -# device pnp 0.1 off end +# device pnp 0.1 off end # device pnp 0.2 off end # device pnp 0.3 off end # device pnp 0.4 off end diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index de4deb23d3..a511afa395 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -24,7 +24,7 @@ unsigned apicid_8111 ; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -36,7 +36,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -73,7 +73,7 @@ void get_bus_conf(void) } get_sblk_pci1234(); - + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; sbdn3 = sysconf.hcdn[0] & 0xff; sbdn5 = sysconf.hcdn[1] & 0xff; @@ -135,8 +135,8 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index f9a358e125..b272fda532 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,11 +12,11 @@ #include <cpu/amd/amdk8_sysconf.h> -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -65,22 +65,22 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_8111_0; pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x1022; pirq->rtr_device = 0x746b; pirq->miniport_data = 0; memset(pirq->rfu, 0, sizeof(pirq->rfu)); - + pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge @@ -90,14 +90,14 @@ unsigned long write_pirq_routing_table(unsigned long addr) // write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); // pirq_info++; slot_num++; //agp bridge - write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - - pirq->size = 32 + 16 * slot_num; + + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index d096b07905..87c812fb13 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -83,7 +83,7 @@ static void *smp_write_config_table(void *v) } } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -100,7 +100,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //??? What smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13); -//Onboard AMD AC97 Audio +//Onboard AMD AC97 Audio smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|1, apicid_8111, 0x11); // Onboard AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); @@ -108,7 +108,7 @@ static void *smp_write_config_table(void *v) // AGP Display Adapter smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10); -//Onboard Serial ATA +//Onboard Serial ATA smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x11); //Onboard Firewire smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x13); @@ -127,7 +127,7 @@ static void *smp_write_config_table(void *v) } -//Slot 4 PCIX 100/66 +//Slot 4 PCIX 100/66 for(i=0;i<4;i++) { smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|i, apicid_8131_1, (2+i)%4); //26 } diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c index 4a686020c8..af0ccabeb8 100644 --- a/src/mainboard/tyan/s2885/resourcemap.c +++ b/src/mainboard/tyan/s2885/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s2885_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s2885_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s2885_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c index 7513c14e1b..f7ea579f6e 100644 --- a/src/mainboard/tyan/s2885/romstage.c +++ b/src/mainboard/tyan/s2885/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -71,7 +71,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -119,13 +119,13 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); // dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); - + /* Halt if there was a built in self test failure */ report_bist_failure(bist); diff --git a/src/mainboard/tyan/s2891/resourcemap.c b/src/mainboard/tyan/s2891/resourcemap.c index f7929b96c0..d76f1d6f47 100644 --- a/src/mainboard/tyan/s2891/resourcemap.c +++ b/src/mainboard/tyan/s2891/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s2891_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -182,7 +182,7 @@ static void setup_s2891_resource_map(void) * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s2891_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s2891_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ // PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, @@ -254,8 +254,8 @@ static void setup_s2891_resource_map(void) */ // PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/tyan/s2892/dsdt.asl b/src/mainboard/tyan/s2892/dsdt.asl index 63a94bb932..d4242c3dc2 100644 --- a/src/mainboard/tyan/s2892/dsdt.asl +++ b/src/mainboard/tyan/s2892/dsdt.asl @@ -6,22 +6,22 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * + * the Free Software Foundation; version 2 of the License. + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + /* * ISA portions taken from QEMU acpi-dsdt.dsl. */ - + DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) { #include "northbridge/amd/amdk8/amdk8_util.asl" diff --git a/src/mainboard/tyan/s2895/dsdt.asl b/src/mainboard/tyan/s2895/dsdt.asl index 268929fd9d..b3ac536d28 100644 --- a/src/mainboard/tyan/s2895/dsdt.asl +++ b/src/mainboard/tyan/s2895/dsdt.asl @@ -6,22 +6,22 @@ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * + * the Free Software Foundation; version 2 of the License. + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ - + /* * ISA portions taken from QEMU acpi-dsdt.dsl. */ - + DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) { #include "northbridge/amd/amdk8/amdk8_util.asl" diff --git a/src/mainboard/tyan/s2912/Kconfig b/src/mainboard/tyan/s2912/Kconfig index 18fa5e2bc3..c2a7ed00dd 100644 --- a/src/mainboard/tyan/s2912/Kconfig +++ b/src/mainboard/tyan/s2912/Kconfig @@ -15,7 +15,7 @@ config BOARD_TYAN_S2912 select LIFT_BSP_APIC_ID select K8_REV_F_SUPPORT select BOARD_ROMSIZE_KB_512 - + config MAINBOARD_DIR string default tyan/s2912 @@ -25,7 +25,7 @@ config DCACHE_RAM_BASE hex default 0xc8000 depends on BOARD_TYAN_S2912 - + config DCACHE_RAM_SIZE hex default 0x08000 @@ -37,7 +37,7 @@ config DCACHE_RAM_GLOBAL_VAR_SIZE depends on BOARD_TYAN_S2912 config APIC_ID_OFFSET - hex + hex default 0x10 depends on BOARD_TYAN_S2912 @@ -77,7 +77,7 @@ config MAX_PHYSICAL_CPUS depends on BOARD_TYAN_S2912 config HW_MEM_HOLE_SIZE_AUTO_INC - bool + bool default n depends on BOARD_TYAN_S2912 @@ -87,12 +87,12 @@ config HT_CHAIN_UNITID_BASE depends on BOARD_TYAN_S2912 config HT_CHAIN_END_UNITID_BASE - hex + hex default 0x20 depends on BOARD_TYAN_S2912 config SERIAL_CPU_INIT - bool + bool default n depends on BOARD_TYAN_S2912 diff --git a/src/mainboard/tyan/s2912/ap_romstage.c b/src/mainboard/tyan/s2912/ap_romstage.c index a477b6891d..41a4a6ee8d 100644 --- a/src/mainboard/tyan/s2912/ap_romstage.c +++ b/src/mainboard/tyan/s2912/ap_romstage.c @@ -25,7 +25,7 @@ #define RAMINIT_SYSINFO 1 #define CACHE_AS_RAM_ADDRESS_DEBUG 0 -#define SET_NB_CFG_54 1 +#define SET_NB_CFG_54 1 //used by raminit #define QRANK_DIMM_SUPPORT 1 diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c index b21b1af4a7..9ff59d24ab 100644 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ b/src/mainboard/tyan/s2912/get_bus_conf.c @@ -35,7 +35,7 @@ struct mb_sysconf_t mb_sysconf; unsigned pci1234x[] = -{ +{ // Here you only need to set value in pci1234 for HT-IO that could be // installed or not. // You may need to preset pci1234 for HTIO board, please refer to @@ -50,7 +50,7 @@ unsigned pci1234x[] = // 0x0000ff0 }; unsigned hcdnx[] = -{ +{ // HT Chain device num, actually it is unit id base of every ht device // in chain, assume every chain only have 4 ht device at most 0x20202020, diff --git a/src/mainboard/tyan/s2912/mb_sysconf.h b/src/mainboard/tyan/s2912/mb_sysconf.h index 83f9dbab28..a2e6fc7ade 100644 --- a/src/mainboard/tyan/s2912/mb_sysconf.h +++ b/src/mainboard/tyan/s2912/mb_sysconf.h @@ -26,7 +26,7 @@ struct mb_sysconf_t { unsigned char bus_isa; unsigned char bus_mcp55[8]; //1 unsigned apicid_mcp55; - unsigned bus_type[256]; + unsigned bus_type[256]; }; diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c index bb14f3310b..a1de4c4f57 100644 --- a/src/mainboard/tyan/s2912_fam10/irq_tables.c +++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c @@ -19,7 +19,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! * (but if you do, please run checkpir on it to verify) * Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -34,11 +34,11 @@ #include <cpu/amd/amdfam10_sysconf.h> #include "mb_sysconf.h" -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; + pirq_info->bus = bus; pirq_info->devfn = devfn; pirq_info->irq[0].link = link0; pirq_info->irq[0].bitmap = bitmap0; @@ -80,15 +80,15 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = m->bus_mcp55[0]; pirq->rtr_devfn = ((sbdn+6)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x10de; pirq->rtr_device = 0x0370; @@ -101,7 +101,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) //pci bridge write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - + for(i=1; i< sysconf.hc_possible_num; i++) { if(!(sysconf.pci1234[i] & 0x1) ) continue; unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff; @@ -120,10 +120,10 @@ unsigned long write_pirq_routing_table(unsigned long addr) } #endif - pirq->size = 32 + 16 * slot_num; + pirq->size = 32 + 16 * slot_num; for (i = 0; i < pirq->size; i++) - sum += v[i]; + sum += v[i]; sum = pirq->checksum - sum; diff --git a/src/mainboard/tyan/s2912_fam10/mb_sysconf.h b/src/mainboard/tyan/s2912_fam10/mb_sysconf.h index 83f9dbab28..a2e6fc7ade 100644 --- a/src/mainboard/tyan/s2912_fam10/mb_sysconf.h +++ b/src/mainboard/tyan/s2912_fam10/mb_sysconf.h @@ -26,7 +26,7 @@ struct mb_sysconf_t { unsigned char bus_isa; unsigned char bus_mcp55[8]; //1 unsigned apicid_mcp55; - unsigned bus_type[256]; + unsigned bus_type[256]; }; diff --git a/src/mainboard/tyan/s4880/devicetree.cb b/src/mainboard/tyan/s4880/devicetree.cb index 4a08e45d1b..4c2f2b59f4 100644 --- a/src/mainboard/tyan/s4880/devicetree.cb +++ b/src/mainboard/tyan/s4880/devicetree.cb @@ -9,7 +9,7 @@ chip northbridge/amd/amdk8/root_complex chip northbridge/amd/amdk8 device pci 18.0 on end # LDT0 device pci 18.0 on end # LDT1 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 2, link 2 == LDT 2 chip southbridge/amd/amd8131 # the on/off keyword is mandatory @@ -68,7 +68,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -86,8 +86,8 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end diff --git a/src/mainboard/tyan/s4880/irq_tables.c b/src/mainboard/tyan/s4880/irq_tables.c index e95038dc37..352a7411e1 100644 --- a/src/mainboard/tyan/s4880/irq_tables.c +++ b/src/mainboard/tyan/s4880/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c index 746d2a5d5e..a5094ba042 100644 --- a/src/mainboard/tyan/s4880/mptable.c +++ b/src/mainboard/tyan/s4880/mptable.c @@ -28,7 +28,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -58,7 +58,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -78,7 +78,7 @@ static void *smp_write_config_table(void *v) smp_write_processors(mc); - + { device_t dev; @@ -88,14 +88,14 @@ static void *smp_write_config_table(void *v) printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } - + /* 8111 */ dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } + bus_isa++; + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); @@ -133,14 +133,14 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; @@ -164,7 +164,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -182,7 +182,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); @@ -214,7 +214,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// -//Slot 3 PCIX 100/66 +//Slot 3 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s4880/resourcemap.c b/src/mainboard/tyan/s4880/resourcemap.c index cf45d55532..5fa85784ab 100644 --- a/src/mainboard/tyan/s4880/resourcemap.c +++ b/src/mainboard/tyan/s4880/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s4880_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s4880_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s4880_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s4880/romstage.c b/src/mainboard/tyan/s4880/romstage.c index 9933303278..753328c062 100644 --- a/src/mainboard/tyan/s4880/romstage.c +++ b/src/mainboard/tyan/s4880/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -65,7 +65,7 @@ static inline void change_i2c_mux(unsigned device) { #define SMBUS_HUB 0x18 int ret; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); ret = smbus_write_byte(SMBUS_HUB, 0x01, device); print_debug("change_i2c_mux 1 ret="); print_debug_hex32(ret); print_debug("\n"); ret = smbus_write_byte(SMBUS_HUB, 0x03, 0); @@ -85,7 +85,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -185,7 +185,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_s4880_resource_map(); needs_reset = setup_coherent_ht_domain(); - + #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); diff --git a/src/mainboard/tyan/s4882/devicetree.cb b/src/mainboard/tyan/s4882/devicetree.cb index d2e5bbcf90..66f8c73e00 100644 --- a/src/mainboard/tyan/s4882/devicetree.cb +++ b/src/mainboard/tyan/s4882/devicetree.cb @@ -7,11 +7,11 @@ chip northbridge/amd/amdk8/root_complex device pci_domain 0 on chip northbridge/amd/amdk8 device pci 18.0 on end # LDT0 - device pci 18.0 on # northbridge + device pci 18.0 on # northbridge # devices on link 1, link 1 == LDT 1 chip southbridge/amd/amd8131 # the on/off keyword is mandatory - device pci 0.0 on + device pci 0.0 on # chip drivers/lsi/53c1030 # device pci 4.0 on end # device pci 4.1 on end @@ -69,7 +69,7 @@ chip northbridge/amd/amdk8/root_complex io 0x60 = 0x220 io 0x62 = 0x300 irq 0x70 = 9 - end + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI @@ -81,12 +81,12 @@ chip northbridge/amd/amdk8/root_complex end device pci 1.1 on end device pci 1.2 on end - device pci 1.3 on + device pci 1.3 on # chip drivers/i2c/i2cmux # pca9556 smbus mux # device i2c 18 on #0 pca9516 2, 1 # chip drivers/i2c/lm63 #cpu0 temp # device i2c 4c on end -# end +# end # end # device i2c 18 on #1 pca9516 1, 1 # chip drivers/generic/generic #dimm 1-0-0 @@ -163,7 +163,7 @@ chip northbridge/amd/amdk8/root_complex # chip drivers/i2c/adm1027 # ADM1027 CPU1 vid and System FAN... # device i2c 2e on end # end -# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid +# chip drivers/generic/generic # Winbond HWM 0x54 CPU0 vid # device i2c 2a on end # end # chip drivers/generic/generic # Winbond HWM 0x92 @@ -181,16 +181,16 @@ chip northbridge/amd/amdk8/root_complex register "ide0_enable" = "1" register "ide1_enable" = "1" end - end # device pci 18.0 - + end # device pci 18.0 + device pci 18.0 on end - + device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end - end + end # chip drivers/generic/debug # device pnp 0.0 off end # chip name # device pnp 0.1 off end # pci_regs_all diff --git a/src/mainboard/tyan/s4882/irq_tables.c b/src/mainboard/tyan/s4882/irq_tables.c index 4552b1f69c..92695abf7b 100644 --- a/src/mainboard/tyan/s4882/irq_tables.c +++ b/src/mainboard/tyan/s4882/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c index 4022dbdde1..81364262b7 100644 --- a/src/mainboard/tyan/s4882/mptable.c +++ b/src/mainboard/tyan/s4882/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 +#if 0 printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); @@ -59,7 +59,7 @@ static void *smp_write_config_table(void *v) unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; - + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -79,24 +79,24 @@ static void *smp_write_config_table(void *v) smp_write_processors(mc); - + { device_t dev; - + /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 1); if (bus_chain_0 == 0) { printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } - + /* 8111 */ dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } + bus_isa++; + } else { printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); @@ -134,14 +134,14 @@ static void *smp_write_config_table(void *v) } smp_write_bus(mc, bus_isa, "ISA "); - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; + apicid_8111 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); @@ -164,7 +164,7 @@ static void *smp_write_config_table(void *v) } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); @@ -182,7 +182,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); - + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); @@ -214,7 +214,7 @@ static void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// -//Slot 3 PCIX 100/66 +//Slot 3 PCIX 100/66 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// diff --git a/src/mainboard/tyan/s4882/resourcemap.c b/src/mainboard/tyan/s4882/resourcemap.c index 0e5be61a7c..2ee274960d 100644 --- a/src/mainboard/tyan/s4882/resourcemap.c +++ b/src/mainboard/tyan/s4882/resourcemap.c @@ -144,7 +144,7 @@ static void setup_s4882_resource_map(void) * 1 = base/limit registers i are read-only * [ 7: 4] Reserved * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address + * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, @@ -200,7 +200,7 @@ static void setup_s4882_resource_map(void) * [ 3: 2] Reserved * [ 4: 4] VGA Enable * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the + * 1 = matches all address < 64K and where A[9:0] is in the * range 3B0-3BB or 3C0-3DF independen of the base & limit registers * [ 5: 5] ISA Enable * 0 = ISA matches Disabled @@ -208,7 +208,7 @@ static void setup_s4882_resource_map(void) * from matching agains this base/limit pair * [11: 6] Reserved * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n + * This field defines the start of PCI I/O region n * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, diff --git a/src/mainboard/tyan/s4882/romstage.c b/src/mainboard/tyan/s4882/romstage.c index e1931fc2d4..9bec9de58b 100644 --- a/src/mainboard/tyan/s4882/romstage.c +++ b/src/mainboard/tyan/s4882/romstage.c @@ -1,4 +1,4 @@ - + #include <stdint.h> #include <string.h> #include <device/pci_def.h> @@ -70,7 +70,7 @@ static inline void change_i2c_mux(unsigned device) { #define SMBUS_HUB 0x18 int ret, i; - print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); + print_debug("change_i2c_mux i="); print_debug_hex8(device); print_debug("\n"); i=2; do { ret = smbus_write_byte(SMBUS_HUB, 0x01, device); @@ -93,7 +93,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "lib/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -155,7 +155,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } - + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -187,7 +187,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) nodes = get_nodes(); //It's the time to set ctrl now; fill_mem_ctrl(nodes, ctrl, spd_addr); - + enable_smbus(); memreset_setup(); |