diff options
Diffstat (limited to 'src/mainboard/tyan')
24 files changed, 1667 insertions, 1612 deletions
diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index 8f953abb4c..3b0cd33dd7 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -41,7 +41,7 @@ arch i386 end driver mainboard.o #dir /drivers/si/3114 - +object get_bus_conf.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end object reset.o diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c new file mode 100644 index 0000000000..01fd2e1a5f --- /dev/null +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -0,0 +1,123 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_isa = 5 ; +unsigned char bus_8131_0 = 1; +unsigned char bus_8131_1 = 2; +unsigned char bus_8131_2 = 3; +unsigned char bus_8111_0 = 1; +unsigned char bus_8111_1 = 4; +unsigned apicid_8111 ; +unsigned apicid_8131_1; +unsigned apicid_8131_2; + +unsigned sblk; +unsigned pci1234[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; +unsigned sbdn3; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] >> 8) & 0xff; + sbdn3 = hcdn[0] & 0xff; + + bus_8131_0 = (pci1234[0] >> 16) & 0xff; + bus_8111_0 = bus_8131_0; + + /* 8111 */ + dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + } + + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + } + + /* 8132-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + } + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_8111 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; +} diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index 028c279ba0..ad4785b899 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -4,34 +4,104 @@ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> #include <arch/pirq_routing.h> -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*9, /* there can be total 9 devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x66, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, - {0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x2,0x38, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,0x40, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x4, 0}, - {0x4,0x30, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,0x50, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x4,0x28, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - } -}; +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_8131_0; +extern unsigned char bus_8131_1; +extern unsigned char bus_8131_2; +extern unsigned char bus_8111_0; +extern unsigned char bus_8111_1; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; + +extern void get_bus_conf(void); + unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_8111_0; + pirq->rtr_devfn = ((sbdn+1)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_8111_0, ((sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge +// write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +// pirq_info++; slot_num++; + + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + } diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index e5804b1d5a..a2526c954f 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -3,44 +3,24 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif +extern unsigned char bus_isa; +extern unsigned char bus_8131_0; +extern unsigned char bus_8131_1; +extern unsigned char bus_8131_2; +extern unsigned char bus_8111_0; +extern unsigned char bus_8111_1; +extern unsigned apicid_8111; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; + +extern void get_bus_conf(void); -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} void *smp_write_config_table(void *v) { @@ -50,15 +30,8 @@ void *smp_write_config_table(void *v) struct mp_config_table *mc; unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_chain_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_1; - unsigned apicid_base; - unsigned apicid_8111; - unsigned apicid_8131_1; - unsigned apicid_8131_2; + + int i; mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -79,84 +52,30 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); + get_bus_conf(); - { - device_t dev; - - /* HT chain 0 */ - bus_chain_0 = node_link_to_bus(0, 2); - if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_chain_0 = 1; - } - - /* 8111 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); - - bus_8111_1 = 4; - bus_isa = 5; - } - /* 8131-1 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); - - bus_8131_1 = 2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); - - bus_8131_2 = 3; - } - } - - /*Bus: Bus ID Type*/ +/*Bus: Bus ID Type*/ /* define bus and isa numbers */ - for (bus_num = 0; bus_num < bus_isa; bus_num++) { + for(bus_num = 0; bus_num < bus_isa; bus_num++) { smp_write_bus(mc, bus_num, "PCI "); } smp_write_bus(mc, bus_isa, "ISA "); - /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; - +/*I/O APICs: APIC ID Version State Address*/ smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); { device_t dev; struct resource *res; - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } - dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -166,8 +85,8 @@ void *smp_write_config_table(void *v) } - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x2); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_8111, 0x3); @@ -179,48 +98,46 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); + +//8111 LPC ???? + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|0, apicid_8111, 0x13); + +//On Board AMD USB ??? + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); + +//On Board ATI Display Adapter + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12); + +//On Board SI Serial ATA + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x11); + +//Slot 3 PCIX 100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (3+i)%4); //27 + } + +//On Board NIC and adaptec scsi + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|i, apicid_8131_1, (0+i)%4); //24 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (0+i)%4); //24 + } + +//Slot 1 PCI-X 133/100/66 or Side 1 on raiser card + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (0+i)%4); //28 + } + + //Slot 1 PCI-X 133/100/66, Side 2 on raiser card + //Fix ME, IRQ Pins? + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (1+i)%4); //28 + } + + - /* PCI Ints: Type Trigger Polarity Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ - //8111 LPC ???? - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13); - - //On Board AMD USB ??? - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); - - //On Board ATI Display Adapter - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12); - - //On Board SI Serial ATA - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x11); - - //Slot 3 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, apicid_8131_1, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, apicid_8131_1, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, apicid_8131_1, 0x2); - - //On Board NIC and adaptec scsi - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|0, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|1, apicid_8131_1, 0x1); - - //Slot 1 PCI-X 133/100/66 or Side 1 on raiser card - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); - - //Slot 1 PCI-X 133/100/66, Side 2 on raiser card - //Fix ME, IRQ Pins? - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|0, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|1, apicid_8131_2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|2, apicid_8131_2, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|3, apicid_8131_2, 0x0); - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); - smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); /* There is no extension information... */ /* Compute the checksums */ diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index d67570445b..37b0d90522 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -41,7 +41,7 @@ arch i386 end driver mainboard.o #dir /drivers/si/3114 - +object get_bus_conf.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end object reset.o diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c new file mode 100644 index 0000000000..5e8e0bd347 --- /dev/null +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -0,0 +1,139 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_isa = 7 ; +unsigned char bus_8131_0 = 1; +unsigned char bus_8131_1 = 2; +unsigned char bus_8131_2 = 3; +unsigned char bus_8111_0 = 1; +unsigned char bus_8111_1 = 4; +unsigned char bus_8151_0 = 5; +unsigned char bus_8151_1 = 6; +unsigned apicid_8111 ; +unsigned apicid_8131_1; +unsigned apicid_8131_2; + +unsigned sblk; +unsigned pci1234[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; +unsigned sbdn3; +unsigned sbdn5; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] >> 8) & 0xff; + sbdn3 = hcdn[0] & 0xff; + sbdn5 = hcdn[1] & 0xff; + + bus_8131_0 = (pci1234[0] >> 16) & 0xff; + bus_8111_0 = bus_8131_0; + + /* 8111 */ + dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + } + + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + } + + /* 8132-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + } + + /* HT chain 1 */ + // it is on node0, so it must be there + bus_8151_0 = (pci1234[1] >> 16) & 0xff; + /* 8151 */ + dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0)); + + if (dev) { + bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +// printk_debug("bus_8151_1=%d\n",bus_8151_1); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_8111 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; +} diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index 82e783a6c9..59c3704c83 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -4,36 +4,109 @@ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> #include <arch/pirq_routing.h> -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*11, /* there can be total 11 devices on the bus */ - 3, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x42, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {3,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x6,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, - {0x1,0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0x0, 0}, - {0x5,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - } -}; +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_8131_0; +extern unsigned char bus_8131_1; +extern unsigned char bus_8131_2; +extern unsigned char bus_8111_0; +extern unsigned char bus_8111_1; +extern unsigned char bus_8151_0; +extern unsigned char bus_8151_1; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdn5; + +extern void get_bus_conf(void); + unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_8111_0; + pirq->rtr_devfn = ((sbdn+1)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1022; + pirq->rtr_device = 0x746b; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_8111_0, ((sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge +// write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +// pirq_info++; slot_num++; +//agp bridge + write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + + pirq_info++; slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + } diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index a9683d577c..83cbaf0e18 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -3,44 +3,25 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif +extern unsigned char bus_isa; +extern unsigned char bus_8131_0; +extern unsigned char bus_8131_1; +extern unsigned char bus_8131_2; +extern unsigned char bus_8111_0; +extern unsigned char bus_8111_1; +extern unsigned char bus_8151_0; +extern unsigned char bus_8151_1; +extern unsigned apicid_8111; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdn5; - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} +extern void get_bus_conf(void); void *smp_write_config_table(void *v) @@ -51,18 +32,7 @@ void *smp_write_config_table(void *v) struct mp_config_table *mc; unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_8131_0; - unsigned char bus_8131_1; - unsigned char bus_8131_2; - unsigned char bus_8111_0; - unsigned char bus_8111_1; - unsigned char bus_8151_0; - unsigned char bus_8151_1; - unsigned apicid_base; - unsigned apicid_8111; - unsigned apicid_8131_1; - unsigned apicid_8131_2; + int i; mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); @@ -84,71 +54,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); - { - device_t dev; - - /* HT chain 0 */ - bus_8151_0 = node_link_to_bus(0, 0); - if (bus_8151_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_8151_0 = 1; - } - /* 8151 */ - dev = dev_find_slot(bus_8151_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -// printk_debug("bus_8151_1=%d\n",bus_8151_1); - bus_8111_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8111_0++; - bus_8131_0 = bus_8111_0; -// printk_debug("bus_8111_0=%d\n",bus_8111_0); - } - else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); - bus_8151_1 = 2; - bus_8111_0 = bus_8131_0 = 3; - } - - /* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(0x03,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); - } - else { - printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); - - bus_8111_1 = 6; - bus_isa = 7; - } - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = 4; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - - } - else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = 5; - } - - } - - + get_bus_conf(); /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -158,26 +64,18 @@ void *smp_write_config_table(void *v) smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000); //8111 { device_t dev; struct resource *res; - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -201,9 +99,9 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //??? What - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|3, apicid_8111, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|3, apicid_8111, 0x13); //Onboard AMD AC97 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, (4<<2)|1, apicid_8111, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|1, apicid_8111, 0x11); // Onboard AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); @@ -218,34 +116,33 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0); //Slot 5 PCI 32 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|1, apicid_8111, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|2, apicid_8111, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|3, apicid_8111, 0x13); // + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|i, apicid_8111, 0x10 + (0+i)%4); //16 + } + //Slot 3 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, apicid_8131_1, 0x3); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, apicid_8131_1, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, apicid_8131_1, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, apicid_8131_1, 0x2);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (3+i)%4); //27 + } + //Slot 4 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|0, apicid_8131_1, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|1, apicid_8131_1, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|2, apicid_8131_1, 0x0);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|3, apicid_8131_1, 0x1);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|i, apicid_8131_1, (2+i)%4); //26 + } + //Slot 1 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); // + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (0+i)%4); //28 + } + //Slot 2 PCI-X 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|0, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|1, apicid_8131_2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|2, apicid_8131_2, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|3, apicid_8131_2, 0x0);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (1+i)%4); //29 + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 7dd9bee1bc..9c460066c9 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -44,6 +44,9 @@ driver mainboard.o #dir /drivers/ati/ragexl +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index fdb8e7a745..e87a4df341 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -55,8 +55,6 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_HW_MEM_HOLE_SIZEK -uses CK804_DEVN_BASE - uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE @@ -133,10 +131,6 @@ default CONFIG_LOGICAL_CPUS=1 #1G memory hole default K8_HW_MEM_HOLE_SIZEK=0x100000 -#CK804 setting - -default CK804_DEVN_BASE=0 - #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c new file mode 100644 index 0000000000..92fefa6a0c --- /dev/null +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -0,0 +1,196 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default + unsigned char bus_isa; + unsigned char bus_ck804_0; //1 + unsigned char bus_ck804_1; //2 + unsigned char bus_ck804_2; //3 + unsigned char bus_ck804_3; //4 + unsigned char bus_ck804_4; //5 + unsigned char bus_ck804_5; //6 + unsigned char bus_8131_0; //7 + unsigned char bus_8131_1; //8 + unsigned char bus_8131_2; //9 + unsigned apicid_ck804; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + +unsigned sblk; +unsigned pci1234[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned sbdn3; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] & 0xff); // first byte of first chain + + sbdn3 = (hcdn[1] & 0xff); // first byte of second chain + +// bus_ck804_0 = node_link_to_bus(0, sblk); + bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + + + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if 0 + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; +#else + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; +#endif + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + + bus_ck804_1 = 2; +#if 0 + bus_ck804_2 = 3; +#else + bus_ck804_4 = 3; +#endif + + } +#if 0 + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); + + bus_ck804_3 = bus_ck804_2+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); + + bus_ck804_4 = bus_ck804_3+1; + } + +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_0++; + bus_isa = bus_8131_0; // incase only one installed + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + + bus_8131_0 = bus_ck804_5+1; + } + + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + + bus_8131_1 = bus_8131_0+1; + bus_8131_2 = bus_8131_0+2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + + bus_8131_2 = bus_8131_1+1; + bus_isa = bus_8131_1+2; + } + + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; +} diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c index d0657461ab..b4d61aaaea 100644 --- a/src/mainboard/tyan/s2891/irq_tables.c +++ b/src/mainboard/tyan/s2891/irq_tables.c @@ -10,71 +10,6 @@ #include <stdint.h> #include <arch/pirq_routing.h> -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*11, /* there can be total 11 devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - ((CK804_DEVN_BASE+9)<<3)|0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x10de, /* Vendor */ - 0x005c, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ -#if CK804_DEVN_BASE==0 - 0x31, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ -#else - 0x19, -#endif - { - {1,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x7,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x0, 0}, - {0x8,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - } -}; - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} - static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -93,6 +28,23 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t dev pirq_info->rfu = rfu; } +extern unsigned char bus_isa; +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0;//7 +extern unsigned char bus_8131_1;//8 +extern unsigned char bus_8131_2;//9 + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; + +extern void get_bus_conf(void); + unsigned long write_pirq_routing_table(unsigned long addr) { @@ -104,126 +56,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) uint8_t sum=0; int i; - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - - { - device_t dev; - - - bus_ck804_0 = node_link_to_bus(0, 0); - if (bus_ck804_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_ck804_0 = 1; - } - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; -#endif - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_4 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } -#endif - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e); - - bus_8131_0 = bus_ck804_5+1; - } - - bus_8131_0 = node_link_to_bus(0, 2); - - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - } - - - } + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c /* Align the table to be 16 byte aligned. */ addr += 15; @@ -239,7 +72,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->version = PIRQ_VERSION; pirq->rtr_bus = bus_ck804_0; - pirq->rtr_devfn = ((CK804_DEVN_BASE+9)<<3)|0; + pirq->rtr_devfn = ((sbdn+9)<<3)|0; pirq->exclusive_irqs = 0; @@ -253,32 +86,32 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; #if 0 //smbus - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //usb - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //audio - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //nic - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //Slot1 PCIE x16 @@ -292,9 +125,6 @@ unsigned long write_pirq_routing_table(unsigned long addr) //Slot2 pci write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); pirq_info++; slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804b_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; //Slot3 PCIE x16 write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); pirq_info++; slot_num++; @@ -307,10 +137,6 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); pirq_info++; slot_num++; -//onboard scsi - write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; - //Slot6 PCIX write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); pirq_info++; slot_num++; diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c index e62ec6eef1..8e4be7d061 100644 --- a/src/mainboard/tyan/s2891/mptable.c +++ b/src/mainboard/tyan/s2891/mptable.c @@ -3,44 +3,26 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} +extern unsigned char bus_isa; +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0;//7 +extern unsigned char bus_8131_1;//8 +extern unsigned char bus_8131_2;//9 +extern unsigned apicid_ck804; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; + +extern void get_bus_conf(void); void *smp_write_config_table(void *v) { @@ -50,20 +32,7 @@ void *smp_write_config_table(void *v) struct mp_config_table *mc; unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned apicid_base; - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; + int i; mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -84,117 +53,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); - { - device_t dev; - - bus_ck804_0 = node_link_to_bus(0, 0); - if (bus_ck804_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_ck804_0 = 1; - } - - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; -#endif - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_4 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } -#endif - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e); - - bus_8131_0 = bus_ck804_5+1; - } - - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - bus_isa = bus_8131_1+2; - } - - } - - + get_bus_conf(); /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -204,21 +63,12 @@ void *smp_write_config_table(void *v) smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_ck804 = apicid_base; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; -// smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE+ 0x1,0)); + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { @@ -233,18 +83,19 @@ void *smp_write_config_table(void *v) pci_write_config32(dev, 0x80, dword); dword = 0x0000007d; + pci_write_config32(dev, 0x84, dword); } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -268,56 +119,54 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_ck804, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+1)<<2)|1, apicid_ck804, 0xa); +// Onboard ck804 smbus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+2)<<2)|0, apicid_ck804, 0x15); // 21 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+2)<<2)|1, apicid_ck804, 0x14); // 20 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +7)<<2)|0, apicid_ck804, 0x17); // 23 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +8)<<2)|0, apicid_ck804, 0x16); // 22 - -#if CK804_DEVN_BASE == 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|0, apicid_ck804, 0x12); // 18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|1, apicid_ck804, 0x13); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|2, apicid_ck804, 0x10); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|3, apicid_ck804, 0x11); // -#else - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|0, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|1, apicid_ck804, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|2, apicid_ck804, 0x13); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|3, apicid_ck804, 0x10); // -#endif - -#if CK804_DEVN_BASE == 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|0, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|1, apicid_ck804, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|2, apicid_ck804, 0x13); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|3, apicid_ck804, 0x10); // -#else - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|0, apicid_ck804, 0x10); // 16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|1, apicid_ck804, 0x11); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|2, apicid_ck804, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|3, apicid_ck804, 0x13); // -#endif +// Onboard ck804 USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + +// Onboard ck804 USB 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + +// Onboard ck804 SATA 0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + +// Onboard ck804 SATA 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + +//Slot PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } +//Slot PCIE x4 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); + } + +//Onboard ati smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|0, apicid_8131_2, 0x0); //24+4+0 = 28 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|1, apicid_8131_2, 0x1); +//Channel B of 8131 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|0, apicid_8131_1, 0x0); // 24 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|1, apicid_8131_1, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|2, apicid_8131_1, 0x2);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|3, apicid_8131_1, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|0, apicid_8131_1, 0x2); // 26 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|1, apicid_8131_1, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|2, apicid_8131_1, 0x0);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|3, apicid_8131_1, 0x1);// +//Onboard Broadcom NIC + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 + } + +//Channel A of 8131 +//Slot 4 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24 + } + +//Slot 3 PCIX 133/100/66 SoDIMM PCI + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26 + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index f4a32837e1..dcb0c45abf 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -43,6 +43,9 @@ arch i386 end driver mainboard.o #dir /drivers/ati/ragexl +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index ede4fe9708..a8bac76536 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -55,8 +55,6 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses K8_HW_MEM_HOLE_SIZEK -uses CK804_DEVN_BASE - uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE @@ -127,10 +125,6 @@ default CONFIG_LOGICAL_CPUS=1 #1G memory hole default K8_HW_MEM_HOLE_SIZEK=0x100000 -#CK804 setting - -default CK804_DEVN_BASE=0 - #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c new file mode 100644 index 0000000000..92fefa6a0c --- /dev/null +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -0,0 +1,196 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default + unsigned char bus_isa; + unsigned char bus_ck804_0; //1 + unsigned char bus_ck804_1; //2 + unsigned char bus_ck804_2; //3 + unsigned char bus_ck804_3; //4 + unsigned char bus_ck804_4; //5 + unsigned char bus_ck804_5; //6 + unsigned char bus_8131_0; //7 + unsigned char bus_8131_1; //8 + unsigned char bus_8131_2; //9 + unsigned apicid_ck804; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + +unsigned sblk; +unsigned pci1234[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned sbdn3; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] & 0xff); // first byte of first chain + + sbdn3 = (hcdn[1] & 0xff); // first byte of second chain + +// bus_ck804_0 = node_link_to_bus(0, sblk); + bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + + + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if 0 + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; +#else + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; +#endif + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + + bus_ck804_1 = 2; +#if 0 + bus_ck804_2 = 3; +#else + bus_ck804_4 = 3; +#endif + + } +#if 0 + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); + + bus_ck804_3 = bus_ck804_2+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); + + bus_ck804_4 = bus_ck804_3+1; + } + +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_0++; + bus_isa = bus_8131_0; // incase only one installed + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + + bus_8131_0 = bus_ck804_5+1; + } + + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + + bus_8131_1 = bus_8131_0+1; + bus_8131_2 = bus_8131_0+2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + + bus_8131_2 = bus_8131_1+1; + bus_isa = bus_8131_1+2; + } + + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(3); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; +} diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c index d6f75a0950..b4d61aaaea 100644 --- a/src/mainboard/tyan/s2892/irq_tables.c +++ b/src/mainboard/tyan/s2892/irq_tables.c @@ -4,36 +4,157 @@ Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> #include <arch/pirq_routing.h> -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*11, /* there can be total 11 devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - ((CK804_DEVN_BASE+9)<<3)|0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x10de, /* Vendor */ - 0x005c, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - {1,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x5,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x5,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x0, 0}, - {0x5,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - } -}; +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_isa; +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0;//7 +extern unsigned char bus_8131_1;//8 +extern unsigned char bus_8131_2;//9 + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; + +extern void get_bus_conf(void); + unsigned long write_pirq_routing_table(unsigned long addr) { - return copy_pirq_routing_table(addr); + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804_0; + pirq->rtr_devfn = ((sbdn+9)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + +#if 0 +//smbus + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot1 PCIE x16 + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; + +//firewire + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot2 pci + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; + +//Slot4 PCIX + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; + +//Slot5 PCIX + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; + +//Slot6 PCIX + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + } diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c index 02754a1b34..e0f16d8921 100644 --- a/src/mainboard/tyan/s2892/mptable.c +++ b/src/mainboard/tyan/s2892/mptable.c @@ -3,44 +3,25 @@ #include <device/pci.h> #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif +extern unsigned char bus_isa; +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0;//7 +extern unsigned char bus_8131_1;//8 +extern unsigned char bus_8131_2;//9 +extern unsigned apicid_ck804; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} void *smp_write_config_table(void *v) { @@ -50,20 +31,7 @@ void *smp_write_config_table(void *v) struct mp_config_table *mc; unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned apicid_base; - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; + int i; mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -84,117 +52,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); - { - device_t dev; - - bus_ck804_0 = node_link_to_bus(0, 0); - if (bus_ck804_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_ck804_0 = 1; - } - - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; -#endif - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_4 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } -#endif - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e); - - bus_8131_0 = bus_ck804_5+1; - } - - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - bus_isa = bus_8131_1+2; - } - - } - - + get_bus_conf(); /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -204,33 +62,23 @@ void *smp_write_config_table(void *v) smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 - apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_ck804 = apicid_base; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; -// smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE+ 0x1,0)); + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); } - /* Initialize interrupt mapping*/ - dword = 0x0000d218; pci_write_config32(dev, 0x7c, dword); dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); dword = 0x0000007d; @@ -238,14 +86,14 @@ void *smp_write_config_table(void *v) } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -269,79 +117,76 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_ck804, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+1)<<2)|1, apicid_ck804, 0xa); +// Onboard ck804 smbus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+2)<<2)|0, apicid_ck804, 0x15); // 21 +// Onboard ck804 USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+2)<<2)|1, apicid_ck804, 0x14); // 20 +// Onboard ck804 USB 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +7)<<2)|0, apicid_ck804, 0x17); // 23 +// Onboard ck804 SATA 0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +8)<<2)|0, apicid_ck804, 0x16); // 22 +// Onboard ck804 SATA 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 -#if CK804_DEVN_BASE == 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|0, apicid_ck804, 0x12); // 18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|1, apicid_ck804, 0x13); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|2, apicid_ck804, 0x10); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|3, apicid_ck804, 0x11); // -#else - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|0, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|1, apicid_ck804, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|2, apicid_ck804, 0x13); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|3, apicid_ck804, 0x10); // -#endif +//Slot PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } -#if CK804_DEVN_BASE == 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|0, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|1, apicid_ck804, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|2, apicid_ck804, 0x13); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|3, apicid_ck804, 0x10); // -#else - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|0, apicid_ck804, 0x10); // 16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|1, apicid_ck804, 0x11); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|2, apicid_ck804, 0x12); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|3, apicid_ck804, 0x13); // -#endif +//Slot PCIE x4 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); + } - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|0, apicid_ck804, 0x10); // 16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|1, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|2, apicid_ck804, 0x12); // 18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|3, apicid_ck804, 0x13); // 19 +//Slot 2 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (4<<2)|i, apicid_ck804, 0x10+(0+i)%4); //16 + } - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x12); // 18 +//Onboard ati + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x12); // 18 +//Onboard intel 10/100 smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (8<<2)|0, apicid_ck804, 0x12); // 18 //Channel B of 8131 //Onboard Broadcom NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|0, apicid_8131_2, 0x0);//24+4= 28 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|1, apicid_8131_2, 0x1); + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 + } + //SO DIMM PCI-X - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|0, apicid_8131_2, 0x0);//28 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|1, apicid_8131_2, 0x1); + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|i, apicid_8131_2, (0+i)%4); //28 + } + //Slot 4 PCIX 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x2); // 30 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x0);// 28 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x1);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (2+i)%4); //30 + } + //Channel A of 8131 //Slot 5 PCIX 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3); //28 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0);//24 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|i, apicid_8131_1, (3+i)%4); //27 + } + //Slot 6 PCIX 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2); // 27 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);// 24 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|i, apicid_8131_1, (2+i)%4); //26 + } + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 7339e7c4a3..6b41829017 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -41,6 +41,9 @@ arch i386 end ## driver mainboard.o +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index cfb0e13222..49b0e0b0de 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -55,8 +55,6 @@ uses CONFIG_PCI_ROM_RUN uses K8_HW_MEM_HOLE_SIZEK uses K8_HT_FREQ_1G_SUPPORT -uses CK804_DEVN_BASE - uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE @@ -136,9 +134,6 @@ default K8_HW_MEM_HOLE_SIZEK=0x100000 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 -#CK804 setting -#default CK804_DEVN_BASE=0 - #VGA default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c index 0a97666ae2..1ae0c9e5d1 100644 --- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -113,7 +113,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/dualcore/dualcore.c" #define CK804_NUM 2 -#define CK804B_BUSN 0x80 #define CK804_USE_NIC 1 #define CK804_USE_ACI 1 @@ -128,7 +127,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ -#include "southbridge/nvidia/ck804/ck804_early_setup.c" +#include "southbridge/nvidia/ck804/ck804_early_setup_car.c" #include "cpu/amd/car/copy_and_run.c" diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c new file mode 100644 index 0000000000..070e6dc5f2 --- /dev/null +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -0,0 +1,271 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default + unsigned char bus_isa; + unsigned char bus_ck804_0; //1 + unsigned char bus_ck804_1; //2 + unsigned char bus_ck804_2; //3 + unsigned char bus_ck804_3; //4 + unsigned char bus_ck804_4; //5 + unsigned char bus_ck804_5; //6 + unsigned char bus_8131_0; //7 + unsigned char bus_8131_1; //8 + unsigned char bus_8131_2; //9 + unsigned char bus_ck804b_0;//a + unsigned char bus_ck804b_1;//b + unsigned char bus_ck804b_2;//c + unsigned char bus_ck804b_3;//d + unsigned char bus_ck804b_4;//e + unsigned char bus_ck804b_5;//f + unsigned apicid_ck804; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + unsigned apicid_ck804b; + +unsigned sblk; +unsigned pci1234[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; +unsigned sbdn3; +unsigned sbdnb; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] & 0xff); // first byte of first chain + + sbdn3 = (hcdn[1] & 0xff); + + sbdnb = (hcdn[2] & 0xff); // first byte of second chain + +// bus_ck804_0 = node_link_to_bus(0, sblk); + bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if 0 + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; +#else + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; +#endif + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + + bus_ck804_1 = 2; +#if 0 + bus_ck804_2 = 3; +#else + bus_ck804_5 = 3; +#endif + + } +#if 0 + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); + + bus_ck804_3 = bus_ck804_2+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); + + bus_ck804_4 = bus_ck804_3+1; + } + + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4+1; + } +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + } + + bus_8131_0 = (pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + + bus_8131_1 = bus_8131_0+1; + bus_8131_2 = bus_8131_0+2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + + bus_8131_2 = bus_8131_1+1; + } + + /* CK804b */ + + if(pci1234[2] & 0f) { //if the second cpu is installed + bus_ck804b_0 = (pci1234[2]>>16) & 0xff; +#if 0 + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0)); + if (dev) { + bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); + + bus_ck804b_1 = bus_ck804b_0+1; + bus_ck804b_2 = bus_ck804b_0+2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0)); + if (dev) { + bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_3++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); + + bus_ck804b_2 = bus_ck804b_0+1; + bus_ck804b_3 = bus_ck804b_0+2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0)); + if (dev) { + bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_4++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); + + bus_ck804b_4 = bus_ck804b_3+1; + } + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0)); + if (dev) { + bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_5++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); + + bus_ck804b_5 = bus_ck804b_4+1; + } +#endif + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0)); + if (dev) { + bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); +#if 1 + bus_ck804b_5 = bus_ck804b_4+1; +#endif + + bus_isa = bus_ck804b_5+1; + } + } + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(4); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; + apicid_ck804b = apicid_base+3; + +} diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c index aa16866763..5ed428ff9f 100644 --- a/src/mainboard/tyan/s2895/irq_tables.c +++ b/src/mainboard/tyan/s2895/irq_tables.c @@ -10,71 +10,6 @@ #include <stdint.h> #include <arch/pirq_routing.h> -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*11, /* there can be total 11 devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - ((CK804_DEVN_BASE+9)<<3)|0, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x10de, /* Vendor */ - 0x005c, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ -#if CK804_DEVN_BASE==0 - 0x31, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ -#else - 0x19, -#endif - { - {1,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x7,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x0, 0}, - {0x8,((CK804_DEVN_BASE+9)<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x5,(6<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x4,(8<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x4,(7<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x6,(0x0a<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x4,(9<<3)|0, {{0x1, 0xdef8}, {2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0b<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x6,(0x0c<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - } -}; - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} - static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -93,6 +28,29 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t dev pirq_info->rfu = rfu; } +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_ck804b_0;//a +extern unsigned char bus_ck804b_1;//b +extern unsigned char bus_ck804b_2;//c +extern unsigned char bus_ck804b_3;//d +extern unsigned char bus_ck804b_4;//e +extern unsigned char bus_ck804b_5;//f + +extern unsigned pci1234[]; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdnb; + unsigned long write_pirq_routing_table(unsigned long addr) { @@ -104,199 +62,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) uint8_t sum=0; int i; - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned char bus_ck804b_0;//a - unsigned char bus_ck804b_1;//b - unsigned char bus_ck804b_2;//c - unsigned char bus_ck804b_3;//d - unsigned char bus_ck804b_4;//e - unsigned char bus_ck804b_5;//f - - { - device_t dev; - - - bus_ck804_0 = node_link_to_bus(0, 0); - if (bus_ck804_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_ck804_0 = 1; - } - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; -#endif - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_5 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } -#endif - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e); - - bus_8131_0 = bus_ck804_5+1; - } - - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_0++; - } - else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - bus_ck804b_0 = bus_8131_1+2; - } - - /* CK804b */ - -#if 0 - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x09); - - bus_ck804b_1 = bus_ck804b_0+1; - bus_ck804b_2 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_3++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0b); - - bus_ck804b_2 = bus_ck804b_0+1; - bus_ck804b_3 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_4++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0c); - - bus_ck804b_4 = bus_ck804b_3+1; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_5++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0d); - - bus_ck804b_5 = bus_ck804b_4+1; - } - -#endif - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0e); -#if 1 - bus_ck804b_5 = bus_ck804b_0+1; -#endif - - } - - } + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c /* Align the table to be 16 byte aligned. */ addr += 15; @@ -312,7 +78,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->version = PIRQ_VERSION; pirq->rtr_bus = bus_ck804_0; - pirq->rtr_devfn = ((CK804_DEVN_BASE+9)<<3)|0; + pirq->rtr_devfn = ((sbdn+9)<<3)|0; pirq->exclusive_irqs = 0; @@ -326,35 +92,37 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (1<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - -//second pci beidge - write_pirq_info(pirq_info, bus_ck804b_0, ((CK804_DEVN_BASE+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; + + if(pci1234[2] & 0xf) { + //second pci beidge + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); + pirq_info++; slot_num++; + } #if 0 //smbus - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //usb - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //audio - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //nic - write_pirq_info(pirq_info, bus_ck804_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //Slot1 PCIE x16 @@ -369,7 +137,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); pirq_info++; slot_num++; //nic - write_pirq_info(pirq_info, bus_ck804b_0, ((CK804_DEVN_BASE+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; //Slot3 PCIE x16 write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c index 810e234af6..a41cbcd12f 100644 --- a/src/mainboard/tyan/s2895/mptable.c +++ b/src/mainboard/tyan/s2895/mptable.c @@ -4,44 +4,33 @@ #include <string.h> #include <stdint.h> -#if CONFIG_LOGICAL_CPUS==1 -#include <cpu/amd/dualcore.h> -#endif - - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - device_t dev; - unsigned reg; - - dev = dev_find_slot(0, PCI_DEVFN(0x18, 1)); - if (!dev) { - return 0; - } - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - uint32_t config_map; - unsigned dst_node; - unsigned dst_link; - unsigned bus_base; - config_map = pci_read_config32(dev, reg); - if ((config_map & 3) != 3) { - continue; - } - dst_node = (config_map >> 4) & 7; - dst_link = (config_map >> 8) & 3; - bus_base = (config_map >> 16) & 0xff; -#if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif - if ((dst_node == node) && (dst_link == link)) - { - return bus_base; - } - } - return 0; -} +extern unsigned char bus_isa; +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_ck804b_0;//a +extern unsigned char bus_ck804b_1;//b +extern unsigned char bus_ck804b_2;//c +extern unsigned char bus_ck804b_3;//d +extern unsigned char bus_ck804b_4;//e +extern unsigned char bus_ck804b_5;//f +extern unsigned apicid_ck804; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; +extern unsigned apicid_ck804b; + +extern unsigned pci1234[]; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdnb; void *smp_write_config_table(void *v) { @@ -51,28 +40,7 @@ void *smp_write_config_table(void *v) struct mp_config_table *mc; unsigned char bus_num; - unsigned char bus_isa; - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned char bus_ck804b_0;//a - unsigned char bus_ck804b_1;//b - unsigned char bus_ck804b_2;//c - unsigned char bus_ck804b_3;//d - unsigned char bus_ck804b_4;//e - unsigned char bus_ck804b_5;//f - unsigned apicid_base; - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - unsigned apicid_ck804b; - + int i; mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); memset(mc, 0, sizeof(*mc)); @@ -93,188 +61,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); - { - device_t dev; - - - bus_ck804_0 = node_link_to_bus(0, 0); - if (bus_ck804_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); - bus_ck804_0 = 1; - } - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; -#endif - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x09); - - bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else - bus_ck804_5 = 3; -#endif - - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", CK804_DEVN_BASE + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } -#endif - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",CK804_DEVN_BASE + 0x0e); - - bus_8131_0 = bus_ck804_5+1; - } - - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x01,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x02,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_0++; - } - else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - bus_ck804b_0 = bus_8131_1+2; - } - - /* CK804b */ - -#if 0 - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x09,0)); - if (dev) { - bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x09); - - bus_ck804b_1 = bus_ck804b_0+1; - bus_ck804b_2 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0b,0)); - if (dev) { - bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_3++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0b); - - bus_ck804b_2 = bus_ck804b_0+1; - bus_ck804b_3 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0c,0)); - if (dev) { - bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_4++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0c); - - bus_ck804b_4 = bus_ck804b_3+1; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0d,0)); - if (dev) { - bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_5++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0d); - - bus_ck804b_5 = bus_ck804b_4+1; - } - -#endif - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x0e,0)); - if (dev) { - bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,CK804_DEVN_BASE+0x0e); -#if 1 - bus_ck804b_5 = bus_ck804b_0+1; -#endif - - bus_isa = bus_ck804b_5+1; - } - - } - - + get_bus_conf(); /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -284,28 +71,19 @@ void *smp_write_config_table(void *v) smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ -#if CONFIG_LOGICAL_CPUS==1 - apicid_base = get_apicid_base(4); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; -#endif - apicid_ck804 = apicid_base; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; - apicid_ck804b = apicid_base+3; -// smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(CK804_DEVN_BASE+ 0x1,0)); + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); } + dword = 0x0000d218; pci_write_config32(dev, 0x7c, dword); @@ -317,14 +95,14 @@ void *smp_write_config_table(void *v) } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x1,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(0x2,1)); + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { @@ -332,7 +110,8 @@ void *smp_write_config_table(void *v) } } - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(CK804_DEVN_BASE + 0x1,0)); + if(pci1234[2] & 0xf) { + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { @@ -349,6 +128,7 @@ void *smp_write_config_table(void *v) pci_write_config32(dev, 0x84, dword); } + } } @@ -366,81 +146,74 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_ck804, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+1)<<2)|1, apicid_ck804, 0xa); +// Onboard ck804 smbus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+2)<<2)|0, apicid_ck804, 0x15); // 21 +// Onboard ck804 USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+2)<<2)|1, apicid_ck804, 0x14); // 20 +// Onboard ck804 USB 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE+4)<<2)|0, apicid_ck804, 0x14); // 20 +// Onboard ck804 Audio + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +7)<<2)|0, apicid_ck804, 0x17); // 23 +// Onboard ck804 SATA 0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +8)<<2)|0, apicid_ck804, 0x16); // 22 +// Onboard ck804 SATA 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((CK804_DEVN_BASE +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 +// Onboard ck804 NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 -#if CK804_DEVN_BASE == 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|0, apicid_ck804, 0x12); // 18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|1, apicid_ck804, 0x13); // 19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|2, apicid_ck804, 0x10); // 16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|3, apicid_ck804, 0x11); // 17 -#else - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|0, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|1, apicid_ck804, 0x12); // 18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|2, apicid_ck804, 0x13); // 19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|3, apicid_ck804, 0x10); // 16 -#endif +//Slot 1 PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } +//Onboard Firewire smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|0, apicid_ck804, 0x10); // 16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|1, apicid_ck804, 0x11); // 17 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|2, apicid_ck804, 0x12); // 18 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|3, apicid_ck804, 0x13); // 19 - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((CK804_DEVN_BASE+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 +//Slot 2 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); + } -#if CK804_DEVN_BASE == 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|0, apicid_ck804b, 0x12);//18+24+4+4=50 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|1, apicid_ck804b, 0x13); // 19 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|2, apicid_ck804b, 0x10); // 16 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|3, apicid_ck804b, 0x11); // 17 -#else - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|0, apicid_ck804b, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|1, apicid_ck804b, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|2, apicid_ck804b, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|3, apicid_ck804b, 0x10); -#endif + if(pci1234[2] & 0xf) { +//Onboard ck804b NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 +//Slot 3 PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); + } + } //Channel B of 8131 //Slot 4 PCI-X 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|0, apicid_8131_2, 0x0); //24+4 = 28 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|1, apicid_8131_2, 0x1); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|2, apicid_8131_2, 0x2); // - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|3, apicid_8131_2, 0x3); // + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4); + } //Slot 5 PCIX 100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|0, apicid_8131_2, 0x1); //24+4+1 = 29 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|1, apicid_8131_2, 0x2); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|2, apicid_8131_2, 0x3);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|3, apicid_8131_2, 0x0);// + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29 + } //OnBoard LSI SCSI - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|0, apicid_8131_2, 0x2); // 24+4+2 = 30 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|1, apicid_8131_2, 0x3); // 31 + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30 + } //Channel A of 8131 -//Slot 6 PCIX 133/100/66 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0); // 24 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|2, apicid_8131_1, 0x2);// - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|3, apicid_8131_1, 0x3);// +//Slot 6 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24 + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); |