diff options
Diffstat (limited to 'src/mainboard/tyan')
51 files changed, 1800 insertions, 1800 deletions
diff --git a/src/mainboard/tyan/s1846/Config.lb b/src/mainboard/tyan/s1846/Config.lb index 1cfed3286a..828db296ed 100644 --- a/src/mainboard/tyan/s1846/Config.lb +++ b/src/mainboard/tyan/s1846/Config.lb @@ -18,38 +18,38 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end driver mainboard.o -if HAVE_PIRQ_TABLE +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end makerule ./failover.E - depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" - action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" + depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" end makerule ./failover.inc - depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" - action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" + depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc" + action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" end makerule ./auto.E - # depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - depends "$(MAINBOARD)/auto.c ../romcc" - action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" + depends "$(CONFIG_MAINBOARD)/auto.c ../romcc" + action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - # depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - depends "$(MAINBOARD)/auto.c ../romcc" - action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + # depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" + depends "$(CONFIG_MAINBOARD)/auto.c ../romcc" + action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" end mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -59,7 +59,7 @@ end mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds mainboardinit ./failover.inc end diff --git a/src/mainboard/tyan/s1846/Options.lb b/src/mainboard/tyan/s1846/Options.lb index e5ebc85be6..9f3680c391 100644 --- a/src/mainboard/tyan/s1846/Options.lb +++ b/src/mainboard/tyan/s1846/Options.lb @@ -18,83 +18,83 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HAVE_OPTION_TABLE -uses USE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_HAVE_OPTION_TABLE +uses CONFIG_USE_OPTION_TABLE uses CONFIG_ROM_PAYLOAD -uses IRQ_SLOT_COUNT -uses MAINBOARD -uses MAINBOARD_VENDOR -uses MAINBOARD_PART_NUMBER +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PART_NUMBER uses COREBOOT_EXTRA_VERSION -uses ARCH -uses FALLBACK_SIZE -uses STACK_SIZE -uses HEAP_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_ARCH +uses CONFIG_FALLBACK_SIZE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses _RAMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses HAVE_MP_TABLE -uses CROSS_COMPILE +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_RAMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_HAVE_MP_TABLE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL uses CONFIG_CONSOLE_SERIAL8250 -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses MAINBOARD_VENDOR -uses MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PART_NUMBER uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -default ROM_SIZE = 256 * 1024 -default HAVE_FALLBACK_BOOT = 1 -default HAVE_MP_TABLE = 0 -default HAVE_HARD_RESET = 0 +default CONFIG_ROM_SIZE = 256 * 1024 +default CONFIG_HAVE_FALLBACK_BOOT = 1 +default CONFIG_HAVE_MP_TABLE = 0 +default CONFIG_HAVE_HARD_RESET = 0 default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 -default HAVE_PIRQ_TABLE = 0 -default IRQ_SLOT_COUNT = 0 # Override this in targets/*/Config.lb. -default MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. -default MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. -default ROM_IMAGE_SIZE = 64 * 1024 -default FALLBACK_SIZE = 128 * 1024 -default STACK_SIZE = 8 * 1024 -default HEAP_SIZE = 16 * 1024 -default HAVE_OPTION_TABLE = 0 -#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE -default USE_OPTION_TABLE = 0 -default _RAMBASE = 0x00004000 +default CONFIG_HAVE_PIRQ_TABLE = 0 +default CONFIG_IRQ_SLOT_COUNT = 0 # Override this in targets/*/Config.lb. +default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb. +default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb. +default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 +default CONFIG_FALLBACK_SIZE = 128 * 1024 +default CONFIG_STACK_SIZE = 8 * 1024 +default CONFIG_HEAP_SIZE = 16 * 1024 +default CONFIG_HAVE_OPTION_TABLE = 0 +#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = 0 +default CONFIG_RAMBASE = 0x00004000 default CONFIG_ROM_PAYLOAD = 1 -default CROSS_COMPILE = "" -default CC = "$(CROSS_COMPILE)gcc -m32" -default HOSTCC = "gcc" +default CONFIG_CROSS_COMPILE = "" +default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC = "gcc" default CONFIG_CONSOLE_SERIAL8250 = 1 -default TTYS0_BAUD = 115200 -default TTYS0_BASE = 0x3f8 -default TTYS0_LCS = 0x3 # 8n1 -default DEFAULT_CONSOLE_LOGLEVEL = 9 -default MAXIMUM_CONSOLE_LOGLEVEL = 9 +default CONFIG_TTYS0_BAUD = 115200 +default CONFIG_TTYS0_BASE = 0x3f8 +default CONFIG_TTYS0_LCS = 0x3 # 8n1 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 default CONFIG_CONSOLE_VGA = 1 default CONFIG_PCI_ROM_RUN = 1 diff --git a/src/mainboard/tyan/s1846/auto.c b/src/mainboard/tyan/s1846/auto.c index 17ab6b02ed..5720e6709d 100644 --- a/src/mainboard/tyan/s1846/auto.c +++ b/src/mainboard/tyan/s1846/auto.c @@ -54,7 +54,7 @@ static void main(unsigned long bist) if (bist == 0) early_mtrr_init(); - pc87309_enable_serial(SERIAL_DEV, TTYS0_BASE); + pc87309_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); report_bist_failure(bist); diff --git a/src/mainboard/tyan/s2735/Config.lb b/src/mainboard/tyan/s2735/Config.lb index f051c5f352..9cc0bc3aea 100644 --- a/src/mainboard/tyan/s2735/Config.lb +++ b/src/mainboard/tyan/s2735/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb default CONFIG_ROM_PAYLOAD = 1 @@ -10,21 +10,21 @@ arch i386 end ## driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end object reset.o if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -49,7 +49,7 @@ ldscript /cpu/x86/16bit/entry16.lds ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -73,7 +73,7 @@ mainboardinit cpu/x86/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2735/Options.lb b/src/mainboard/tyan/s2735/Options.lb index b52c94b734..7a5d39b0a5 100644 --- a/src/mainboard/tyan/s2735/Options.lb +++ b/src/mainboard/tyan/s2735/Options.lb @@ -1,82 +1,82 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_USE_INIT uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS -uses SERIAL_CPU_INIT +uses CONFIG_SERIAL_CPU_INIT uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE +uses CONFIG_RAMBASE uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_CONSOLE_BTEXT -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_PRINTK_IN_CAR -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. #512K bytes -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 #1M bytes -#default ROM_SIZE=1048576 +#default CONFIG_ROM_SIZE=1048576 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=131072 +default CONFIG_FALLBACK_SIZE=131072 ### ### Build options @@ -85,12 +85,12 @@ default FALLBACK_SIZE=131072 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## Delay timer options ## @@ -100,26 +100,26 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=15 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -130,7 +130,7 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 -default SERIAL_CPU_INIT=0 +default CONFIG_SERIAL_CPU_INIT=0 #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 @@ -142,10 +142,10 @@ default SERIAL_CPU_INIT=0 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -#default DCACHE_RAM_BASE=0xF2000000 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +#default CONFIG_DCACHE_RAM_BASE=0xF2000000 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_PRINTK_IN_CAR=1 @@ -157,37 +157,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2735" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735 +default CONFIG_MAINBOARD_PART_NUMBER="s2735" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2735 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -201,8 +201,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -217,21 +217,21 @@ default CONFIG_GDB_STUB=0 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -243,17 +243,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2735/cache_as_ram_auto.c b/src/mainboard/tyan/s2735/cache_as_ram_auto.c index 8c4a0370e0..427b070bdb 100644 --- a/src/mainboard/tyan/s2735/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2735/cache_as_ram_auto.c @@ -79,7 +79,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/x86/car/copy_and_run.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/intel/i82801er/cmos_failover.c" @@ -147,7 +147,7 @@ void amd64_main(unsigned long bist) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); @@ -228,10 +228,10 @@ cpu_reset_x: } __asm__ volatile ( - /* set new esp */ /* before _RAMBASE */ + /* set new esp */ /* before CONFIG_RAMBASE */ "subl %0, %%ebp\n\t" "subl %0, %%esp\n\t" - ::"a"( (DCACHE_RAM_BASE + DCACHE_RAM_SIZE)- _RAMBASE ) + ::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- CONFIG_RAMBASE ) ); { diff --git a/src/mainboard/tyan/s2850/Config.lb b/src/mainboard/tyan/s2850/Config.lb index 84bb7084eb..59dcd8e557 100644 --- a/src/mainboard/tyan/s2850/Config.lb +++ b/src/mainboard/tyan/s2850/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2850/Options.lb b/src/mainboard/tyan/s2850/Options.lb index f9317f7bd2..37814240be 100644 --- a/src/mainboard/tyan/s2850/Options.lb +++ b/src/mainboard/tyan/s2850/Options.lb @@ -1,64 +1,64 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -67,50 +67,50 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=12 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=12 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -122,7 +122,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=1 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -132,9 +132,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## @@ -145,37 +145,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="S2850" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 +default CONFIG_MAINBOARD_PART_NUMBER="S2850" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2850 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -189,8 +189,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -207,21 +207,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -233,17 +233,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2850/cache_as_ram_auto.c b/src/mainboard/tyan/s2850/cache_as_ram_auto.c index 373e0a6192..378c05a723 100644 --- a/src/mainboard/tyan/s2850/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2850/cache_as_ram_auto.c @@ -94,7 +94,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -150,7 +150,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -179,7 +179,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2875/Config.lb b/src/mainboard/tyan/s2875/Config.lb index bb3393fe3c..73481883f8 100644 --- a/src/mainboard/tyan/s2875/Config.lb +++ b/src/mainboard/tyan/s2875/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2875/Options.lb b/src/mainboard/tyan/s2875/Options.lb index 01daaa4e6f..5eaa91acc6 100644 --- a/src/mainboard/tyan/s2875/Options.lb +++ b/src/mainboard/tyan/s2875/Options.lb @@ -1,64 +1,64 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -67,51 +67,51 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=13 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -123,7 +123,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -133,9 +133,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## @@ -146,37 +146,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2875" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875 +default CONFIG_MAINBOARD_PART_NUMBER="s2875" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2875 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -190,8 +190,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -208,21 +208,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -234,17 +234,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2875/cache_as_ram_auto.c b/src/mainboard/tyan/s2875/cache_as_ram_auto.c index 893635b9f8..1912beeeb8 100644 --- a/src/mainboard/tyan/s2875/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2875/cache_as_ram_auto.c @@ -85,7 +85,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -138,7 +138,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -176,7 +176,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb index 85ade62c85..3ca46b67bb 100644 --- a/src/mainboard/tyan/s2880/Config.lb +++ b/src/mainboard/tyan/s2880/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2880/Options.lb b/src/mainboard/tyan/s2880/Options.lb index 8b37f911db..0a1c746f20 100644 --- a/src/mainboard/tyan/s2880/Options.lb +++ b/src/mainboard/tyan/s2880/Options.lb @@ -1,64 +1,64 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -67,50 +67,50 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=13 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=13 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -122,7 +122,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=0 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -132,9 +132,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## @@ -145,37 +145,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="S2880" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880 +default CONFIG_MAINBOARD_PART_NUMBER="S2880" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2880 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -189,8 +189,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -207,21 +207,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -233,17 +233,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2880/cache_as_ram_auto.c b/src/mainboard/tyan/s2880/cache_as_ram_auto.c index eb4bcae466..bfb89116c6 100644 --- a/src/mainboard/tyan/s2880/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2880/cache_as_ram_auto.c @@ -86,7 +86,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -138,7 +138,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -177,7 +177,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2881/Config.lb b/src/mainboard/tyan/s2881/Config.lb index f9ac2a2570..6480067300 100644 --- a/src/mainboard/tyan/s2881/Config.lb +++ b/src/mainboard/tyan/s2881/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index d83638715b..18087be3d3 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -1,69 +1,69 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -72,50 +72,50 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -127,19 +127,19 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 ##HT Unit ID offset, default is 1, the typical one -default HT_CHAIN_UNITID_BASE=0x0a +default CONFIG_HT_CHAIN_UNITID_BASE=0x0a ##real SB Unit ID, default is 0x20, mean dont touch it at last -default HT_CHAIN_END_UNITID_BASE=0x06 +default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=0 +default CONFIG_SB_HT_CHAIN_ON_BUS0=0 ##only offset for SB chain?, default is yes(1) -#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -149,9 +149,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## @@ -162,37 +162,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2881" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881 +default CONFIG_MAINBOARD_PART_NUMBER="s2881" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2881 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -206,8 +206,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -224,21 +224,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -250,17 +250,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2881/cache_as_ram_auto.c b/src/mainboard/tyan/s2881/cache_as_ram_auto.c index 0f853b8af1..9beb7afaeb 100644 --- a/src/mainboard/tyan/s2881/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2881/cache_as_ram_auto.c @@ -99,7 +99,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -155,7 +155,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -185,7 +185,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index d4c01675ab..1ed1e0dbaa 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -82,7 +82,7 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE +#if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; // printk_debug("bus_isa=%d\n",bus_isa); @@ -105,7 +105,7 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE +#if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; // printk_debug("bus_isa=%d\n",bus_isa); diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb index c61a0f3291..687169622a 100644 --- a/src/mainboard/tyan/s2882/Config.lb +++ b/src/mainboard/tyan/s2882/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2882/Options.lb b/src/mainboard/tyan/s2882/Options.lb index 9e6b36db70..cfa2b679b9 100644 --- a/src/mainboard/tyan/s2882/Options.lb +++ b/src/mainboard/tyan/s2882/Options.lb @@ -1,64 +1,64 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -67,50 +67,50 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=15 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -122,7 +122,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -132,9 +132,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## @@ -145,37 +145,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="S2882" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882 +default CONFIG_MAINBOARD_PART_NUMBER="S2882" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2882 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -189,8 +189,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -207,21 +207,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -233,17 +233,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2882/cache_as_ram_auto.c b/src/mainboard/tyan/s2882/cache_as_ram_auto.c index a249fa1a8d..62d9a69d10 100644 --- a/src/mainboard/tyan/s2882/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2882/cache_as_ram_auto.c @@ -89,7 +89,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -141,7 +141,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -180,7 +180,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 9ee230a90e..74f9c53e65 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb arch i386 end @@ -12,21 +12,21 @@ driver mainboard.o #dir /drivers/si/3114 object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -35,7 +35,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -53,7 +53,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -77,7 +77,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 88e7bf2790..2bb6681057 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -1,75 +1,75 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK @@ -78,50 +78,50 @@ uses CONFIG_LB_MEM_TOPK ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -133,19 +133,19 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 ##HT Unit ID offset, default is 1, the typical one -default HT_CHAIN_UNITID_BASE=0x0a +default CONFIG_HT_CHAIN_UNITID_BASE=0x0a ##real SB Unit ID, default is 0x20, mean dont touch it at last -default HT_CHAIN_END_UNITID_BASE=0x06 +default CONFIG_HT_CHAIN_END_UNITID_BASE=0x06 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) -#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -155,14 +155,14 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 -default ENABLE_APIC_EXT_ID=1 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=0 +default CONFIG_ENABLE_APIC_EXT_ID=1 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=0 ## ## Build code to setup a generic IOAPIC @@ -172,37 +172,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2885" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885 +default CONFIG_MAINBOARD_PART_NUMBER="s2885" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -216,8 +216,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -234,21 +234,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -260,17 +260,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c index 711afbc645..c2f97df8ae 100644 --- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c @@ -99,7 +99,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -155,7 +155,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -185,11 +185,11 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); -// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); +// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE); /* Halt if there was a built in self test failure */ report_bist_failure(bist); diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index b50f671f9b..eaf77cd569 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -85,7 +85,7 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE +#if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; // printk_debug("bus_isa=%d\n",bus_isa); @@ -108,7 +108,7 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE +#if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; // printk_debug("bus_isa=%d\n",bus_isa); diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index d1a3874435..f14894d23e 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb default CONFIG_ROM_PAYLOAD = 1 @@ -16,15 +16,15 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -if HAVE_ACPI_TABLES +if CONFIG_HAVE_ACPI_TABLES object acpi_tables.o makerule dsdt.c - depends "$(MAINBOARD)/dsdt.dsl" - action "iasl -p $(CURDIR)/dsdt -tc $(MAINBOARD)/dsdt.dsl" + depends "$(CONFIG_MAINBOARD)/dsdt.dsl" + action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl" action "mv dsdt.hex dsdt.c" end object ./dsdt.o @@ -34,13 +34,13 @@ end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -49,7 +49,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -67,7 +67,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -84,7 +84,7 @@ ldscript /southbridge/nvidia/ck804/id.lds ## ## ROMSTRAP table for CK804 ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/ck804/romstrap.inc ldscript /southbridge/nvidia/ck804/romstrap.lds end @@ -99,7 +99,7 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index ed514efc1d..d3cc2c2eff 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -1,96 +1,96 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses HAVE_ACPI_TABLES -uses HAVE_ACPI_RESUME -uses HAVE_LOW_TABLES +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT -uses HAVE_SMI_HANDLER -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_HAVE_SMI_HANDLER +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE +uses CONFIG_RAMBASE uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_CONSOLE_BTEXT -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_CONSOLE_VGA uses CONFIG_VGA_ROM_RUN uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID uses CONFIG_PCI_64BIT_PREF_MEM -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=512*1024 +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. +default CONFIG_ROM_SIZE=512*1024 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ### ### Build options @@ -99,48 +99,48 @@ default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build SMI handler ## -default HAVE_SMI_HANDLER=0 +default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default HAVE_ACPI_TABLES=1 -default HAVE_LOW_TABLES=1 +default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -157,19 +157,19 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 ##HT Unit ID offset, default is 1, the typical one -default HT_CHAIN_UNITID_BASE=0x0 +default CONFIG_HT_CHAIN_UNITID_BASE=0x0 ##real SB Unit ID, default is 0x20, mean dont touch it at last -#default HT_CHAIN_END_UNITID_BASE=0x0 +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) -#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 @@ -181,14 +181,14 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 -default ENABLE_APIC_EXT_ID=0 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=0 +default CONFIG_ENABLE_APIC_EXT_ID=0 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=0 #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -201,37 +201,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2891" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891 +default CONFIG_MAINBOARD_PART_NUMBER="s2891" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2891 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -245,8 +245,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -263,21 +263,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -289,17 +289,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c index 6cf98abeb5..fd6c1c5236 100644 --- a/src/mainboard/tyan/s2891/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c @@ -77,7 +77,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -165,7 +165,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -195,7 +195,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 45672e99c6..04a53b57be 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb default CONFIG_ROM_PAYLOAD = 1 @@ -17,15 +17,15 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -if HAVE_ACPI_TABLES +if CONFIG_HAVE_ACPI_TABLES object acpi_tables.o makerule dsdt.c - depends "$(MAINBOARD)/dsdt.dsl" - action "iasl -p $(CURDIR)/dsdt -tc $(MAINBOARD)/dsdt.dsl" + depends "$(CONFIG_MAINBOARD)/dsdt.dsl" + action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl" action "mv dsdt.hex dsdt.c" end object ./dsdt.o @@ -35,13 +35,13 @@ end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -50,7 +50,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -68,7 +68,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -85,7 +85,7 @@ ldscript /southbridge/nvidia/ck804/id.lds ## ## ROMSTRAP table for CK804 ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/ck804/romstrap.inc ldscript /southbridge/nvidia/ck804/romstrap.lds end @@ -100,7 +100,7 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 0cfbcd5c56..efc4cba7a5 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -1,90 +1,90 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses HAVE_ACPI_TABLES -uses HAVE_ACPI_RESUME -uses HAVE_LOW_TABLES +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT -uses HAVE_SMI_HANDLER -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_HAVE_SMI_HANDLER +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE +uses CONFIG_RAMBASE uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 uses CONFIG_CONSOLE_BTEXT -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_CONSOLE_VGA uses CONFIG_VGA_ROM_RUN uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=1024*1024 +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. +default CONFIG_ROM_SIZE=1024*1024 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ### ### Build options @@ -93,48 +93,48 @@ default FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build SMI handler ## -default HAVE_SMI_HANDLER=0 +default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default HAVE_ACPI_TABLES=1 -default HAVE_LOW_TABLES=1 +default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -151,19 +151,19 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 ##HT Unit ID offset, default is 1, the typical one -default HT_CHAIN_UNITID_BASE=0x0 +default CONFIG_HT_CHAIN_UNITID_BASE=0x0 ##real SB Unit ID, default is 0x20, mean dont touch it at last -#default HT_CHAIN_END_UNITID_BASE=0x0 +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) -default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 @@ -175,9 +175,9 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 @@ -189,37 +189,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2892" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892 +default CONFIG_MAINBOARD_PART_NUMBER="s2892" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -233,8 +233,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -251,21 +251,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -277,17 +277,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c index bafd6e9c9b..97f0660096 100644 --- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c @@ -83,7 +83,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -155,7 +155,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -185,7 +185,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index a8023fe0c7..3bf256f3e3 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/failovercalculation.lb arch i386 end @@ -12,15 +12,15 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o -if HAVE_ACPI_TABLES +if CONFIG_HAVE_ACPI_TABLES object acpi_tables.o makerule dsdt.c - depends "$(MAINBOARD)/dsdt.dsl" - action "iasl -p $(CURDIR)/dsdt -tc $(MAINBOARD)/dsdt.dsl" + depends "$(CONFIG_MAINBOARD)/dsdt.dsl" + action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl" action "mv dsdt.hex dsdt.c" end object ./dsdt.o @@ -30,13 +30,13 @@ end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -45,13 +45,13 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -70,8 +70,8 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -79,7 +79,7 @@ if HAVE_FAILOVER_BOOT ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -97,13 +97,13 @@ ldscript /southbridge/nvidia/ck804/id.lds ## ## ROMSTRAP table for CK804 ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/ck804/romstrap.inc ldscript /southbridge/nvidia/ck804/romstrap.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/ck804/romstrap.inc ldscript /southbridge/nvidia/ck804/romstrap.lds end @@ -119,12 +119,12 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE ldscript /arch/i386/lib/failover_failover.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end end diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 19c7cdfd73..58878494cd 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -1,103 +1,103 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses USE_FAILOVER_IMAGE -uses HAVE_FAILOVER_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_USE_FAILOVER_IMAGE +uses CONFIG_HAVE_FAILOVER_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses FAILOVER_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_FAILOVER_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses HAVE_ACPI_TABLES -uses HAVE_ACPI_RESUME -uses HAVE_LOW_TABLES +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_HAVE_LOW_TABLES uses CONFIG_MULTIBOOT -uses HAVE_SMI_HANDLER -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_HAVE_SMI_HANDLER +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE +uses CONFIG_RAMBASE uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_CONSOLE_VGA uses CONFIG_VGA_ROM_RUN uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK -uses K8_HT_FREQ_1G_SUPPORT +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_K8_HT_FREQ_1G_SUPPORT -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR -uses SERIAL_CPU_INIT +uses CONFIG_SERIAL_CPU_INIT -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=1024*1024 +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. +default CONFIG_ROM_SIZE=1024*1024 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 -#default FALLBACK_SIZE=0x40000 +#default CONFIG_FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=0x40000 #FALLBACK: 256K-4K -default FALLBACK_SIZE=0x3f000 +default CONFIG_FALLBACK_SIZE=0x3f000 #FAILOVER: 4K -default FAILOVER_SIZE=0x01000 +default CONFIG_FAILOVER_SIZE=0x01000 #more 1M for pgtbl default CONFIG_LB_MEM_TOPK=2048 @@ -105,49 +105,49 @@ default CONFIG_LB_MEM_TOPK=2048 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 -default HAVE_FAILOVER_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FAILOVER_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build SMI handler ## -default HAVE_SMI_HANDLER=0 +default CONFIG_HAVE_SMI_HANDLER=0 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to provide ACPI support ## -default HAVE_ACPI_TABLES=1 -default HAVE_LOW_TABLES=1 +default CONFIG_HAVE_ACPI_TABLES=1 +default CONFIG_HAVE_LOW_TABLES=1 default CONFIG_MULTIBOOT=0 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -163,25 +163,25 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 -default SERIAL_CPU_INIT=0 +default CONFIG_SERIAL_CPU_INIT=0 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 ##HT Unit ID offset, default is 1, the typical one -default HT_CHAIN_UNITID_BASE=0x0 +default CONFIG_HT_CHAIN_UNITID_BASE=0x0 ##real SB Unit ID, default is 0x20, mean dont touch it at last -#default HT_CHAIN_END_UNITID_BASE=0x0 +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x0 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) -default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 +default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -190,14 +190,14 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 -default ENABLE_APIC_EXT_ID=0 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=0 +default CONFIG_ENABLE_APIC_EXT_ID=0 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=0 ## @@ -208,37 +208,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="s2895" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895 +default CONFIG_MAINBOARD_PART_NUMBER="s2895" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) +default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00100000 +default CONFIG_RAMBASE=0x00100000 ## ## Load the payload from the ROM @@ -252,8 +252,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -270,21 +270,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -296,17 +296,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c index 43a6cf089e..2da764f24e 100644 --- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -21,7 +21,7 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" @@ -44,7 +44,7 @@ #define SUPERIO_GPIO_IO_BASE 0x400 -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "cpu/x86/bist.h" @@ -120,7 +120,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -197,7 +197,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) fallback_image: // post_code(0x25); -#if HAVE_FAILOVER_BOOT==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 __asm__ volatile ("jmp __fallback_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ @@ -211,21 +211,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 - #if USE_FAILOVER_IMAGE==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else - #if USE_FALLBACK_IMAGE == 1 + #if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif } -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -250,7 +250,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // post_code(0x32); - lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); + lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s2912/Config.lb b/src/mainboard/tyan/s2912/Config.lb index 34638892ae..c8f3a8f041 100644 --- a/src/mainboard/tyan/s2912/Config.lb +++ b/src/mainboard/tyan/s2912/Config.lb @@ -19,8 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/failovercalculation.lb arch i386 end @@ -33,30 +33,30 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./cache_as_ram_auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end end -if USE_FAILOVER_IMAGE +if CONFIG_USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR makerule ./apc_auto.o - depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/apc_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" end ldscript /arch/i386/init/ldscript_apc.lb end @@ -66,13 +66,13 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -91,8 +91,8 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -100,7 +100,7 @@ if HAVE_FAILOVER_BOOT ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -118,13 +118,13 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ## ROMSTRAP table for MCP55 ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -140,12 +140,12 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE ldscript /arch/i386/lib/failover_failover.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end end diff --git a/src/mainboard/tyan/s2912/Options.lb b/src/mainboard/tyan/s2912/Options.lb index 7222788349..a2166dd8b0 100644 --- a/src/mainboard/tyan/s2912/Options.lb +++ b/src/mainboard/tyan/s2912/Options.lb @@ -19,90 +19,90 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses HAVE_ACPI_TABLES -uses HAVE_ACPI_RESUME -uses ACPI_SSDTX_NUM -uses USE_FALLBACK_IMAGE -uses USE_FAILOVER_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_FAILOVER_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_ACPI_SSDTX_NUM +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_USE_FAILOVER_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_FAILOVER_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses FAILOVER_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_FAILOVER_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_USBDEBUG_DIRECT uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK -uses HW_MEM_HOLE_SIZE_AUTO_INC -uses K8_HT_FREQ_1G_SUPPORT - -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE -uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC +uses CONFIG_K8_HT_FREQ_1G_SUPPORT + +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE uses CONFIG_USE_INIT -uses SERIAL_CPU_INIT +uses CONFIG_SERIAL_CPU_INIT -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID uses CONFIG_PCI_64BIT_PREF_MEM @@ -110,9 +110,9 @@ uses CONFIG_LB_MEM_TOPK uses CONFIG_AP_CODE_IN_CAR -uses MEM_TRAIN_SEQ +uses CONFIG_MEM_TRAIN_SEQ -uses WAIT_BEFORE_CPUS_INIT +uses CONFIG_WAIT_BEFORE_CPUS_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -121,21 +121,21 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 -#default ROM_SIZE=0x100000 +default CONFIG_ROM_SIZE=524288 +#default CONFIG_ROM_SIZE=0x100000 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 -#default FALLBACK_SIZE=0x40000 +#default CONFIG_FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=0x40000 #FALLBACK: 256K-4K -default FALLBACK_SIZE=0x3f000 +default CONFIG_FALLBACK_SIZE=0x3f000 #FAILOVER: 4K -default FAILOVER_SIZE=0x01000 +default CONFIG_FAILOVER_SIZE=0x01000 #more 1M for pgtbl default CONFIG_LB_MEM_TOPK=2048 @@ -143,42 +143,42 @@ default CONFIG_LB_MEM_TOPK=2048 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 -default HAVE_FAILOVER_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FAILOVER_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ACPI tables will be included -default HAVE_ACPI_TABLES=0 +default CONFIG_HAVE_ACPI_TABLES=0 ## extra SSDT num -default ACPI_SSDTX_NUM=3 +default CONFIG_ACPI_SSDTX_NUM=3 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -189,25 +189,25 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 -#default SERIAL_CPU_INIT=0 +#default CONFIG_SERIAL_CPU_INIT=0 -default ENABLE_APIC_EXT_ID=0 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=1 +default CONFIG_ENABLE_APIC_EXT_ID=0 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=1 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G -#default HW_MEM_HOLE_SIZEK=0x200000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 #1G -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #512M -#default HW_MEM_HOLE_SIZEK=0x80000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default HW_MEM_HOLE_SIZE_AUTO_INC=1 +#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 #Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 +default CONFIG_K8_HT_FREQ_1G_SUPPORT=1 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -216,16 +216,16 @@ default CONFIG_PCI_ROM_RUN=1 #default CONFIG_USBDEBUG_DIRECT=1 #HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default HT_CHAIN_UNITID_BASE=0 +default CONFIG_HT_CHAIN_UNITID_BASE=0 #real SB Unit ID, default is 0x20, mean dont touch it at last -#default HT_CHAIN_END_UNITID_BASE=0x6 +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 #only offset for SB chain?, default is yes(1) -default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #allow capable device use that above 4G #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -233,15 +233,15 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xc8000 -default DCACHE_RAM_SIZE=0x08000 -default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xc8000 +default CONFIG_DCACHE_RAM_SIZE=0x08000 +default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 default CONFIG_USE_INIT=0 default CONFIG_AP_CODE_IN_CAR=0 -default MEM_TRAIN_SEQ=1 -default WAIT_BEFORE_CPUS_INIT=1 +default CONFIG_MEM_TRAIN_SEQ=1 +default CONFIG_WAIT_BEFORE_CPUS_INIT=1 ## ## Build code to setup a generic IOAPIC @@ -251,37 +251,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="S2912" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912 +default CONFIG_MAINBOARD_PART_NUMBER="S2912" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 32K heap ## -default HEAP_SIZE=0x8000 +default CONFIG_HEAP_SIZE=0x8000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) +default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00100000 +default CONFIG_RAMBASE=0x00100000 ## ## Load the payload from the ROM @@ -297,8 +297,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -314,21 +314,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -340,17 +340,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2912/apc_auto.c b/src/mainboard/tyan/s2912/apc_auto.c index d15f5ac346..8985b7affd 100644 --- a/src/mainboard/tyan/s2912/apc_auto.c +++ b/src/mainboard/tyan/s2912/apc_auto.c @@ -75,8 +75,8 @@ void hardwaremain(int ret_addr) { - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE - struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM struct node_core_id id; diff --git a/src/mainboard/tyan/s2912/cache_as_ram_auto.c b/src/mainboard/tyan/s2912/cache_as_ram_auto.c index 7c387b9bd0..5be6d82e9b 100644 --- a/src/mainboard/tyan/s2912/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2912/cache_as_ram_auto.c @@ -39,7 +39,7 @@ //if we want to wait for core1 done before DQS training, set it to 0 #define K8_SET_FIDVID_CORE0_ONLY 1 -#if K8_REV_F_SUPPORT == 1 +#if CONFIG_K8_REV_F_SUPPORT == 1 #define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 #endif @@ -56,7 +56,7 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "pc80/serial.c" #include "arch/i386/lib/console.c" #if CONFIG_USBDEBUG_DIRECT @@ -79,7 +79,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "superio/winbond/w83627hf/w83627hf_early_init.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "cpu/x86/bist.h" @@ -150,7 +150,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -219,7 +219,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) ); fallback_image: -#if HAVE_FAILOVER_BOOT==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 __asm__ volatile ("jmp __fallback_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ @@ -232,21 +232,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 - #if USE_FAILOVER_IMAGE==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else - #if USE_FALLBACK_IMAGE == 1 + #if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif } -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -259,7 +259,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif }; - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); int needs_reset = 0; unsigned bsp_apicid = 0; @@ -268,7 +268,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); setup_mb_resource_map(); @@ -287,7 +287,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n"); -#if MEM_TRAIN_SEQ == 1 +#if CONFIG_MEM_TRAIN_SEQ == 1 set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram #endif setup_coherent_ht_domain(); // routing table and start other core0 diff --git a/src/mainboard/tyan/s2912_fam10/Config.lb b/src/mainboard/tyan/s2912_fam10/Config.lb index 2e66e5a470..26977d657d 100644 --- a/src/mainboard/tyan/s2912_fam10/Config.lb +++ b/src/mainboard/tyan/s2912_fam10/Config.lb @@ -19,8 +19,8 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/failovercalculation.lb arch i386 end @@ -33,30 +33,30 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT makerule ./cache_as_ram_auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./cache_as_ram_auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end end -if USE_FAILOVER_IMAGE +if CONFIG_USE_FAILOVER_IMAGE else if CONFIG_AP_CODE_IN_CAR makerule ./apc_auto.o - depends "$(MAINBOARD)/apc_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/apc_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@" end ldscript /arch/i386/init/ldscript_apc.lb end @@ -66,13 +66,13 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -91,8 +91,8 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -100,7 +100,7 @@ if HAVE_FAILOVER_BOOT ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -118,13 +118,13 @@ ldscript /southbridge/nvidia/mcp55/id.lds ## ## ROMSTRAP table for MCP55 ## -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE mainboardinit southbridge/nvidia/mcp55/romstrap.inc ldscript /southbridge/nvidia/mcp55/romstrap.lds end @@ -140,12 +140,12 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE +if CONFIG_HAVE_FAILOVER_BOOT + if CONFIG_USE_FAILOVER_IMAGE ldscript /arch/i386/lib/failover_failover.lds end else - if USE_FALLBACK_IMAGE + if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end end diff --git a/src/mainboard/tyan/s2912_fam10/Options.lb b/src/mainboard/tyan/s2912_fam10/Options.lb index 0f77329e6b..5d250e82a4 100644 --- a/src/mainboard/tyan/s2912_fam10/Options.lb +++ b/src/mainboard/tyan/s2912_fam10/Options.lb @@ -19,125 +19,125 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses HAVE_ACPI_TABLES -uses HAVE_ACPI_RESUME -uses ACPI_SSDTX_NUM -uses USE_FALLBACK_IMAGE -uses USE_FAILOVER_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_FAILOVER_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_HAVE_ACPI_RESUME +uses CONFIG_ACPI_SSDTX_NUM +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_USE_FAILOVER_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_FAILOVER_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses FAILOVER_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_FAILOVER_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_USBDEBUG_DIRECT uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK -uses HW_MEM_HOLE_SIZE_AUTO_INC - -uses HT_CHAIN_UNITID_BASE -uses HT_CHAIN_END_UNITID_BASE -uses SB_HT_CHAIN_ON_BUS0 -uses SB_HT_CHAIN_UNITID_OFFSET_ONLY - -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE -uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC + +uses CONFIG_HT_CHAIN_UNITID_BASE +uses CONFIG_HT_CHAIN_END_UNITID_BASE +uses CONFIG_SB_HT_CHAIN_ON_BUS0 +uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE +uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE uses CONFIG_USE_INIT -uses SERIAL_CPU_INIT +uses CONFIG_SERIAL_CPU_INIT -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID uses CONFIG_PCI_64BIT_PREF_MEM uses CONFIG_LB_MEM_TOPK -uses PCI_BUS_SEGN_BITS +uses CONFIG_PCI_BUS_SEGN_BITS uses CONFIG_AP_CODE_IN_CAR -uses MEM_TRAIN_SEQ +uses CONFIG_MEM_TRAIN_SEQ -uses WAIT_BEFORE_CPUS_INIT +uses CONFIG_WAIT_BEFORE_CPUS_INIT uses CONFIG_AMDMCT uses CONFIG_USE_PRINTK_IN_CAR -uses CAR_FAM10 -uses AMD_UCODE_PATCH_FILE +uses CONFIG_CAR_FAM10 +uses CONFIG_AMD_UCODE_PATCH_FILE ### ### Build options ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=1024*1024 -#default ROM_SIZE=0x100000 +default CONFIG_ROM_SIZE=1024*1024 +#default CONFIG_ROM_SIZE=0x100000 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 -#default FALLBACK_SIZE=0x40000 +#default CONFIG_FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=0x40000 -default FALLBACK_SIZE=0x3f000 -default FAILOVER_SIZE=0x01000 +default CONFIG_FALLBACK_SIZE=0x3f000 +default CONFIG_FAILOVER_SIZE=0x01000 #more 1M for pgtbl default CONFIG_LB_MEM_TOPK=16384 @@ -145,42 +145,42 @@ default CONFIG_LB_MEM_TOPK=16384 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 -default HAVE_FAILOVER_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FAILOVER_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=11 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ACPI tables will be included -default HAVE_ACPI_TABLES=0 +default CONFIG_HAVE_ACPI_TABLES=0 ## extra SSDT num -default ACPI_SSDTX_NUM=31 +default CONFIG_ACPI_SSDTX_NUM=31 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -191,22 +191,22 @@ default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS default CONFIG_LOGICAL_CPUS=1 -#default SERIAL_CPU_INIT=0 +#default CONFIG_SERIAL_CPU_INIT=0 -default ENABLE_APIC_EXT_ID=1 -default APIC_ID_OFFSET=0x00 -default LIFT_BSP_APIC_ID=1 +default CONFIG_ENABLE_APIC_EXT_ID=1 +default CONFIG_APIC_ID_OFFSET=0x00 +default CONFIG_LIFT_BSP_APIC_ID=1 #memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead. #2G -#default HW_MEM_HOLE_SIZEK=0x200000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000 #1G -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #512M -#default HW_MEM_HOLE_SIZEK=0x80000 +#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000 #make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy -#default HW_MEM_HOLE_SIZE_AUTO_INC=1 +#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -215,16 +215,16 @@ default CONFIG_PCI_ROM_RUN=1 #default CONFIG_USBDEBUG_DIRECT=1 #HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device -default HT_CHAIN_UNITID_BASE=1 +default CONFIG_HT_CHAIN_UNITID_BASE=1 #real SB Unit ID, default is 0x20, mean dont touch it at last -#default HT_CHAIN_END_UNITID_BASE=0x6 +#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6 #make the SB HT chain on bus 0, default is not (0) -default SB_HT_CHAIN_ON_BUS0=2 +default CONFIG_SB_HT_CHAIN_ON_BUS0=2 #only offset for SB chain?, default is yes(1) -default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #allow capable device use that above 4G #default CONFIG_PCI_64BIT_PREF_MEM=1 @@ -232,14 +232,14 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xc4000 -default DCACHE_RAM_SIZE=0x0c000 -default DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xc4000 +default CONFIG_DCACHE_RAM_SIZE=0x0c000 +default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000 default CONFIG_USE_INIT=0 -default MEM_TRAIN_SEQ=2 -default WAIT_BEFORE_CPUS_INIT=0 +default CONFIG_MEM_TRAIN_SEQ=2 +default CONFIG_WAIT_BEFORE_CPUS_INIT=0 default CONFIG_AMDMCT = 1 ## @@ -250,10 +250,10 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="S2912 (Fam10)" -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912 +default CONFIG_MAINBOARD_PART_NUMBER="S2912 (Fam10)" +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912 ## ## Set microcode patch file name @@ -263,34 +263,34 @@ default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912 ## Barcelona rev DR-B2, B3: "mc_patch_01000095.h" ## Shanghai rev DA-C2: "mc_patch_0100009f.h" ## -default AMD_UCODE_PATCH_FILE="mc_patch_01000095.h" +default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000095.h" ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 32K heap ## -default HEAP_SIZE=0xc0000 +default CONFIG_HEAP_SIZE=0xc0000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) +default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE ) ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00200000 +default CONFIG_RAMBASE=0x00200000 ## ## Load the payload from the ROM @@ -306,8 +306,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -323,21 +323,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -349,17 +349,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s2912_fam10/apc_auto.c b/src/mainboard/tyan/s2912_fam10/apc_auto.c index d15f5ac346..8985b7affd 100644 --- a/src/mainboard/tyan/s2912_fam10/apc_auto.c +++ b/src/mainboard/tyan/s2912_fam10/apc_auto.c @@ -75,8 +75,8 @@ void hardwaremain(int ret_addr) { - struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE - struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM + struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM struct node_core_id id; diff --git a/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c b/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c index 8121d34bf7..ffdf04a92b 100644 --- a/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2912_fam10/cache_as_ram_auto.c @@ -53,7 +53,7 @@ static void post_code(u8 value) { outb(value, 0x80); } -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "pc80/serial.c" #include "arch/i386/lib/console.c" #if CONFIG_USBDEBUG_DIRECT @@ -75,7 +75,7 @@ static void post_code(u8 value) { #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "superio/winbond/w83627hf/w83627hf_early_init.c" -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "cpu/x86/bist.h" @@ -145,7 +145,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #endif -#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) +#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c" @@ -215,7 +215,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) ); fallback_image: -#if HAVE_FAILOVER_BOOT==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 __asm__ volatile ("jmp __fallback_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ @@ -228,28 +228,28 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 - #if USE_FAILOVER_IMAGE==1 +#if CONFIG_HAVE_FAILOVER_BOOT==1 + #if CONFIG_USE_FAILOVER_IMAGE==1 failover_process(bist, cpu_init_detectedx); #else real_main(bist, cpu_init_detectedx); #endif #else - #if USE_FALLBACK_IMAGE == 1 + #if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); #endif } -#if USE_FAILOVER_IMAGE==0 +#if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c" void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { - struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); u32 bsp_apicid = 0; u32 val; @@ -264,7 +264,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); printk_debug("\n"); diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c index 86fa65f2c2..ea870a147b 100644 --- a/src/mainboard/tyan/s2912_fam10/irq_tables.c +++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c @@ -111,11 +111,11 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info++; slot_num++; } -#if CBB - write_pirq_info(pirq_info, CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); +#if CONFIG_CBB + write_pirq_info(pirq_info, CONFIG_CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; if(sysconf.nodes>32) { - write_pirq_info(pirq_info, CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, CONFIG_CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; } #endif diff --git a/src/mainboard/tyan/s2912_fam10/resourcemap.c b/src/mainboard/tyan/s2912_fam10/resourcemap.c index 73d3d43014..b638d4f718 100644 --- a/src/mainboard/tyan/s2912_fam10/resourcemap.c +++ b/src/mainboard/tyan/s2912_fam10/resourcemap.c @@ -49,14 +49,14 @@ static void setup_mb_resource_map(void) * This field defines the upper address bits of a 40 bit address * that define the end of the DRAM region. */ - // PCI_ADDR(CBB, CDB, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(CBB, CDB, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(CBB, CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(CBB, CDB, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(CBB, CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(CBB, CDB, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(CBB, CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x7C), 0x0000f8f8, 0x00000007, /* DRAM Base i Registers * F1:0x40 i = 0 @@ -88,14 +88,14 @@ static void setup_mb_resource_map(void) * This field defines the upper address bits of a 40-bit address * that define the start of the DRAM region. */ - // PCI_ADDR(CBB, CDB, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x78), 0x0000f8fc, 0x00000000, + // PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x78), 0x0000f8fc, 0x00000000, /* Memory-Mapped I/O Limit i Registers * F1:0x84 i = 0 @@ -129,14 +129,14 @@ static void setup_mb_resource_map(void) * This field defines the upp adddress bits of a 40-bit address that * defines the end of a memory-mapped I/O region n */ - PCI_ADDR(CBB, CDB, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(CBB, CDB, 1, 0xBC), 0x00000048, 0x00ffff00, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xBC), 0x00000048, 0x00ffff00, /* Memory-Mapped I/O Base i Registers * F1:0x80 i = 0 @@ -164,14 +164,14 @@ static void setup_mb_resource_map(void) * This field defines the upper address bits of a 40bit address * that defines the start of memory-mapped I/O region i */ - PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(CBB, CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xB8), 0x000000f0, 0x00fc0003, /* PCI I/O Limit i Registers * F1:0xC4 i = 0 @@ -198,10 +198,10 @@ static void setup_mb_resource_map(void) * This field defines the end of PCI I/O region n * [31:25] Reserved */ -// PCI_ADDR(CBB, CDB, 1, 0xC4), 0xFE000FC8, 0x00007000, -// PCI_ADDR(CBB, CDB, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset - PCI_ADDR(CBB, CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC4), 0xFE000FC8, 0x00007000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xDC), 0xFE000FC8, 0x00000000, /* PCI I/O Base i Registers * F1:0xC0 i = 0 @@ -228,10 +228,10 @@ static void setup_mb_resource_map(void) * This field defines the start of PCI I/O region n * [31:25] Reserved */ -// PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, -// PCI_ADDR(CBB, CDB, 1, 0xC8), 0xFE000FCC, 0x00008033, - PCI_ADDR(CBB, CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC0), 0xFE000FCC, 0x00000033, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xC8), 0xFE000FCC, 0x00008033, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xD8), 0xFE000FCC, 0x00000000, /* Config Base and Limit i Registers * F1:0xE0 i = 0 @@ -269,10 +269,10 @@ static void setup_mb_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration region i */ -// PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ -// PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ - PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000, +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */ +// PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */ + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(CONFIG_CBB, CONFIG_CDB, 1, 0xEC), 0x0000FC88, 0x00000000, }; diff --git a/src/mainboard/tyan/s4880/Config.lb b/src/mainboard/tyan/s4880/Config.lb index eacd638313..c85db4b9b2 100644 --- a/src/mainboard/tyan/s4880/Config.lb +++ b/src/mainboard/tyan/s4880/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb default CONFIG_ROM_PAYLOAD = 1 @@ -11,21 +11,21 @@ arch i386 end ## driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -34,7 +34,7 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -52,7 +52,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -76,7 +76,7 @@ ldscript /arch/i386/lib/id.lds ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s4880/Options.lb b/src/mainboard/tyan/s4880/Options.lb index 485ab8397b..05760e668c 100644 --- a/src/mainboard/tyan/s4880/Options.lb +++ b/src/mainboard/tyan/s4880/Options.lb @@ -1,120 +1,120 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID ### ### Build options ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=22 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=22 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -126,7 +126,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=4 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console default CONFIG_CONSOLE_VGA=1 @@ -136,14 +136,14 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 -default ENABLE_APIC_EXT_ID=1 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=0 +default CONFIG_ENABLE_APIC_EXT_ID=1 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=0 ## @@ -154,37 +154,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PART_NUMBER="s4880" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880 +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PART_NUMBER="s4880" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4880 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -198,8 +198,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -216,21 +216,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -242,17 +242,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s4880/cache_as_ram_auto.c b/src/mainboard/tyan/s4880/cache_as_ram_auto.c index d7226afcef..0f403ab6ba 100644 --- a/src/mainboard/tyan/s4880/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s4880/cache_as_ram_auto.c @@ -112,7 +112,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -164,7 +164,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -226,7 +226,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/tyan/s4882/Config.lb b/src/mainboard/tyan/s4882/Config.lb index 97bf1e06b6..7da0a6773a 100644 --- a/src/mainboard/tyan/s4882/Config.lb +++ b/src/mainboard/tyan/s4882/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb default CONFIG_ROM_PAYLOAD = 1 @@ -11,21 +11,21 @@ arch i386 end ## driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -34,7 +34,7 @@ if HAVE_PIRQ_TABLE object irq_tables.o end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -52,7 +52,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -76,7 +76,7 @@ ldscript /arch/i386/lib/id.lds ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/tyan/s4882/Options.lb b/src/mainboard/tyan/s4882/Options.lb index e5eadf414f..3ae897bb7c 100644 --- a/src/mainboard/tyan/s4882/Options.lb +++ b/src/mainboard/tyan/s4882/Options.lb @@ -1,120 +1,120 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses HAVE_INIT_TIMER +uses CONFIG_HAVE_INIT_TIMER uses CONFIG_GDB_STUB uses CONFIG_GDB_STUB -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses HW_MEM_HOLE_SIZEK +uses CONFIG_HW_MEM_HOLE_SIZEK -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR -uses ENABLE_APIC_EXT_ID -uses APIC_ID_OFFSET -uses LIFT_BSP_APIC_ID +uses CONFIG_ENABLE_APIC_EXT_ID +uses CONFIG_APIC_ID_OFFSET +uses CONFIG_LIFT_BSP_APIC_ID ### ### Build options ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -#default FALLBACK_SIZE=131072 +#default CONFIG_FALLBACK_SIZE=131072 #256K -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=22 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=22 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -126,7 +126,7 @@ default CONFIG_MAX_PHYSICAL_CPUS=4 default CONFIG_LOGICAL_CPUS=1 #1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 +default CONFIG_HW_MEM_HOLE_SIZEK=0x100000 #VGA Console #default CONFIG_CONSOLE_VGA=1 @@ -136,14 +136,14 @@ default HW_MEM_HOLE_SIZEK=0x100000 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 -default ENABLE_APIC_EXT_ID=1 -default APIC_ID_OFFSET=0x10 -default LIFT_BSP_APIC_ID=0 +default CONFIG_ENABLE_APIC_EXT_ID=1 +default CONFIG_APIC_ID_OFFSET=0x10 +default CONFIG_LIFT_BSP_APIC_ID=0 ## ## Build code to setup a generic IOAPIC @@ -153,37 +153,37 @@ default CONFIG_IOAPIC=1 ## ## Clean up the motherboard id strings ## -default MAINBOARD_VENDOR="Tyan" -default MAINBOARD_PART_NUMBER="s4882" -default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 -default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882 +default CONFIG_MAINBOARD_VENDOR="Tyan" +default CONFIG_MAINBOARD_PART_NUMBER="s4882" +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x4882 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x4000 +default CONFIG_HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00002000 +default CONFIG_RAMBASE=0x00002000 ## ## Load the payload from the ROM @@ -197,8 +197,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" ## ## Disable the gdb stub by default @@ -215,21 +215,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -241,17 +241,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/tyan/s4882/cache_as_ram_auto.c b/src/mainboard/tyan/s4882/cache_as_ram_auto.c index cdc1d2645f..b45e1dc467 100644 --- a/src/mainboard/tyan/s4882/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s4882/cache_as_ram_auto.c @@ -119,7 +119,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -171,7 +171,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -206,7 +206,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); |