diff options
Diffstat (limited to 'src/mainboard/tyan')
38 files changed, 165 insertions, 165 deletions
diff --git a/src/mainboard/tyan/s2735/mptable.c b/src/mainboard/tyan/s2735/mptable.c index 35baeb31ce..eb6b94aba2 100644 --- a/src/mainboard/tyan/s2735/mptable.c +++ b/src/mainboard/tyan/s2735/mptable.c @@ -154,7 +154,7 @@ Compatibility Bus Address /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2735/romstage.c b/src/mainboard/tyan/s2735/romstage.c index 6bcb459236..c4450ebb38 100644 --- a/src/mainboard/tyan/s2735/romstage.c +++ b/src/mainboard/tyan/s2735/romstage.c @@ -145,7 +145,7 @@ void amd64_main(unsigned long bist) : "=a" (v_esp) ); #if CONFIG_USE_INIT - printk_debug("v_esp=%08x\r\n", v_esp); + printk(BIOS_DEBUG, "v_esp=%08x\r\n", v_esp); #else print_debug("v_esp="); print_debug_hex32(v_esp); print_debug("\r\n"); #endif @@ -157,7 +157,7 @@ void amd64_main(unsigned long bist) cpu_reset_x: #if CONFIG_USE_INIT - printk_debug("cpu_reset = %08x\r\n",cpu_reset); + printk(BIOS_DEBUG, "cpu_reset = %08x\r\n",cpu_reset); #else print_debug("cpu_reset = "); print_debug_hex32(cpu_reset); print_debug("\r\n"); #endif @@ -206,7 +206,7 @@ cpu_reset_x: print_debug("Use Ram as Stack now - \r\n"); } #if CONFIG_USE_INIT - printk_debug("new_cpu_reset = %08x\r\n", new_cpu_reset); + printk(BIOS_DEBUG, "new_cpu_reset = %08x\r\n", new_cpu_reset); #else print_debug("new_cpu_reset = "); print_debug_hex32(new_cpu_reset); print_debug("\r\n"); #endif diff --git a/src/mainboard/tyan/s2850/mptable.c b/src/mainboard/tyan/s2850/mptable.c index fe175795e2..93ca67545e 100644 --- a/src/mainboard/tyan/s2850/mptable.c +++ b/src/mainboard/tyan/s2850/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -81,7 +81,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } /* 8111 */ @@ -92,7 +92,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8111_1 = 2; bus_isa = 3; @@ -194,7 +194,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2875/mptable.c b/src/mainboard/tyan/s2875/mptable.c index 394410b5ba..5f0ac0a3ac 100644 --- a/src/mainboard/tyan/s2875/mptable.c +++ b/src/mainboard/tyan/s2875/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -81,7 +81,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -91,10 +91,10 @@ void *smp_write_config_table(void *v) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; - printk_debug("bus_isa=%d\n",bus_isa); + printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 3; bus_isa = 4; @@ -103,11 +103,11 @@ void *smp_write_config_table(void *v) dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0)); if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - printk_debug("bus_8151_1=%d\n",bus_8151_1); + printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8151_1 = 2; } @@ -209,7 +209,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2880/mptable.c b/src/mainboard/tyan/s2880/mptable.c index d013a463fa..6da67170b5 100644 --- a/src/mainboard/tyan/s2880/mptable.c +++ b/src/mainboard/tyan/s2880/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -86,7 +86,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -98,7 +98,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -110,7 +110,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -121,7 +121,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -237,7 +237,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index 1ed1e0dbaa..063515c27f 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -85,11 +85,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); } /* 8131-1 */ @@ -98,7 +98,7 @@ void get_bus_conf(void) bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); } /* 8132-2 */ @@ -108,11 +108,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); } diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index c428ec5dee..b61b269024 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -58,7 +58,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -100,7 +100,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c index 1c86e86f73..5866577ce4 100644 --- a/src/mainboard/tyan/s2881/mainboard.c +++ b/src/mainboard/tyan/s2881/mainboard.c @@ -41,7 +41,7 @@ static void adt7463_init(device_t dev) smbus_dev = dev_find_device(0x1022, 0x746b, 0); if (!smbus_dev) die("SMBus controller not found\n"); - printk_debug("SMBus controller found\n"); + printk(BIOS_DEBUG, "SMBus controller found\n"); /* Find the ADT7463 device. */ path.type = DEVICE_PATH_I2C; @@ -49,7 +49,7 @@ static void adt7463_init(device_t dev) adt7463 = find_dev_path(smbus_dev->link, &path); if (!adt7463) die("ADT7463 not found\n"); - printk_debug("ADT7463 found\n"); + printk(BIOS_DEBUG, "ADT7463 found\n"); /* Set all fans to 'Fastest Speed Calculated by All 3 Temperature * Channels Controls PWMx'. @@ -95,7 +95,7 @@ static void adt7463_init(device_t dev) /* Set TACH measurements to normal (1/second). */ result = smbus_write_byte(adt7463, 0x78, 0xf0); - printk_debug("ADT7463 properly initialized\n"); + printk(BIOS_DEBUG, "ADT7463 properly initialized\n"); } static void dummy_noop(device_t dummy) @@ -117,7 +117,7 @@ static unsigned int scan_root_bus(device_t root, unsigned int max) max = root_dev_scan_bus(root, max); - printk_debug("scan_root_bus ok\n"); + printk(BIOS_DEBUG, "scan_root_bus ok\n"); /* The following is a little silly. We need a hook into the boot * process *after* the ADT7463 device has been initialized. So we @@ -128,7 +128,7 @@ static unsigned int scan_root_bus(device_t root, unsigned int max) link_i = root->links; if (link_i >= MAX_LINKS) { - printk_debug("Reached MAX_LINKS, not configuring ADT7463"); + printk(BIOS_DEBUG, "Reached MAX_LINKS, not configuring ADT7463"); return max; } root->link[link_i].link = link_i; diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index e901416994..06f6f5903c 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -141,7 +141,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index e10f7632e6..b5c075e879 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -64,7 +64,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -115,7 +115,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -125,7 +125,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; } @@ -136,7 +136,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -147,7 +147,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -158,7 +158,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...\n", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...\n", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -197,67 +197,67 @@ unsigned long write_pirq_routing_table(unsigned long addr) } } - printk_debug("setting Onboard AMD Southbridge \n"); + printk(BIOS_DEBUG, "setting Onboard AMD Southbridge \n"); static const unsigned char slotIrqs_1_4[4] = { 5, 9, 11, 10 }; pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4); write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard AMD USB \n"); + printk(BIOS_DEBUG, "setting Onboard AMD USB \n"); static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 }; pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0); write_pirq_info(pirq_info, bus_8111_1,0, 0, 0, 0, 0, 0, 0, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard ATI Display Adapter\n"); + printk(BIOS_DEBUG, "setting Onboard ATI Display Adapter\n"); static const unsigned char slotIrqs_8111_1_6[4] = { 11, 0, 0, 0 }; pci_assign_irqs(bus_8111_1, 6, slotIrqs_8111_1_6); write_pirq_info(pirq_info, bus_8111_1,(6<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 1\n"); + printk(BIOS_DEBUG, "setting Slot 1\n"); static const unsigned char slotIrqs_8131_2_3[4] = { 5, 9, 11, 10 }; pci_assign_irqs(bus_8131_2, 3, slotIrqs_8131_2_3); write_pirq_info(pirq_info, bus_8131_2,(3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 2\n"); + printk(BIOS_DEBUG, "setting Slot 2\n"); static const unsigned char slotIrqs_8131_2_1[4] = { 9, 11, 10, 5 }; pci_assign_irqs(bus_8131_2, 1, slotIrqs_8131_2_1); write_pirq_info(pirq_info, bus_8131_2,(1<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 3\n"); + printk(BIOS_DEBUG, "setting Slot 3\n"); static const unsigned char slotIrqs_8131_1_3[4] = { 10, 5, 9, 11 }; pci_assign_irqs(bus_8131_1, 3, slotIrqs_8131_1_3); write_pirq_info(pirq_info, bus_8131_1,(3<<3)|0, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x3, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 4\n"); + printk(BIOS_DEBUG, "setting Slot 4\n"); static const unsigned char slotIrqs_8131_1_2[4] = { 11, 10, 5, 9 }; pci_assign_irqs(bus_8131_1, 2, slotIrqs_8131_1_2); write_pirq_info(pirq_info, bus_8131_1,(2<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x4, 0); pirq_info++; slot_num++; - printk_debug("setting Slot 5 \n"); + printk(BIOS_DEBUG, "setting Slot 5 \n"); static const unsigned char slotIrqs_8111_1_4[4] = { 5, 9, 11, 10 }; pci_assign_irqs(bus_8111_1, 4, slotIrqs_8111_1_4); write_pirq_info(pirq_info, bus_8111_1,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x5, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard SI Serial ATA\n"); + printk(BIOS_DEBUG, "setting Onboard SI Serial ATA\n"); static const unsigned char slotIrqs_8111_1_5[4] = { 10, 0, 0, 0 }; pci_assign_irqs(bus_8111_1, 5, slotIrqs_8111_1_5); write_pirq_info(pirq_info, bus_8111_1,(5<<3)|0, 0x4, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard Intel NIC\n"); + printk(BIOS_DEBUG, "setting Onboard Intel NIC\n"); static const unsigned char slotIrqs_8111_1_8[4] = { 11, 0, 0, 0 }; pci_assign_irqs(bus_8111_1, 8, slotIrqs_8111_1_8); write_pirq_info(pirq_info, bus_8111_1,(8<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; - printk_debug("setting Onboard Adaptec SCSI\n"); + printk(BIOS_DEBUG, "setting Onboard Adaptec SCSI\n"); static const unsigned char slotIrqs_8131_1_6[4] = { 5, 9, 0, 0 }; pci_assign_irqs(bus_8131_1, 6, slotIrqs_8131_1_6); write_pirq_info(pirq_info, bus_8131_1,(6<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); @@ -268,7 +268,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info++; slot_num++; #endif - printk_debug("setting Onboard Broadcom NIC\n"); + printk(BIOS_DEBUG, "setting Onboard Broadcom NIC\n"); static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 }; pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9); write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); @@ -296,7 +296,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c index 6461a0be45..f546693ffb 100644 --- a/src/mainboard/tyan/s2882/mptable.c +++ b/src/mainboard/tyan/s2882/mptable.c @@ -31,7 +31,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -85,7 +85,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 0); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -97,7 +97,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -109,7 +109,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -120,7 +120,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -248,7 +248,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index eaf77cd569..22a5b760db 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -88,11 +88,11 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE >= CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); } /* 8131-1 */ @@ -101,7 +101,7 @@ void get_bus_conf(void) bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); } /* 8132-2 */ @@ -111,12 +111,12 @@ void get_bus_conf(void) #if CONFIG_HT_CHAIN_END_UNITID_BASE < CONFIG_HT_CHAIN_UNITID_BASE bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); +// printk(BIOS_DEBUG, "bus_isa=%d\n",bus_isa); #endif } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); } /* HT chain 1 */ @@ -127,7 +127,7 @@ void get_bus_conf(void) if (dev) { bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -// printk_debug("bus_8151_1=%d\n",bus_8151_1); +// printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_isa++; } diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index 4fc12a04ac..590140e352 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -61,7 +61,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -105,7 +105,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index b126d2f60d..952ba69d2a 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -152,7 +152,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2891/acpi_tables.c b/src/mainboard/tyan/s2891/acpi_tables.c index 895a629911..303c3dd6e4 100644 --- a/src/mainboard/tyan/s2891/acpi_tables.c +++ b/src/mainboard/tyan/s2891/acpi_tables.c @@ -113,7 +113,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -131,21 +131,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 64); facs = (acpi_facs_t *) current; - printk_debug("ACPI: * FACS %p\n", facs); + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ current = ALIGN(current, 16); dsdt = (acpi_header_t *) current; - printk_debug("ACPI: * DSDT %p\n", dsdt); + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); current += ((acpi_header_t *) AmlCode)->length; memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); current = ALIGN(current, 16); fadt = (acpi_fadt_t *) current; - printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt); + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); current += sizeof(acpi_fadt_t); /* Add FADT now that we have facs and dsdt. */ @@ -154,21 +154,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 16); hpet = (acpi_hpet_t *) current; - printk_debug("ACPI: * HPET @ %p\n", hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); current = ALIGN(current, 16); madt = (acpi_madt_t *) current; - printk_debug("ACPI: * APIC/MADT @ %p\n", madt); + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); current = ALIGN(current, 16); srat = (acpi_srat_t *) current; - printk_debug("ACPI: * SRAT @ %p\n", srat); + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); @@ -176,7 +176,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ALIGN(current, 16); slit = (acpi_slit_t *) current; - printk_debug("ACPI: * SLIT @ %p\n", slit); + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); @@ -184,11 +184,11 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ALIGN(current, 16); ssdt = (acpi_header_t *)current; - printk_debug("ACPI: * SSDT @ %p\n", ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done %p.\n", (void *)current); + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); return current; } diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c index 779f8885d0..31afeb0f86 100644 --- a/src/mainboard/tyan/s2891/get_bus_conf.c +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -96,7 +96,7 @@ void get_bus_conf(void) bus_ck804_4++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; bus_ck804_4 = 3; @@ -109,7 +109,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); bus_ck804_5 = bus_ck804_4+1; } @@ -121,7 +121,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; @@ -133,7 +133,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -146,7 +146,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; bus_isa = bus_8131_1+2; diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c index c0e484a4f0..dc117f404b 100644 --- a/src/mainboard/tyan/s2891/irq_tables.c +++ b/src/mainboard/tyan/s2891/irq_tables.c @@ -67,7 +67,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -162,7 +162,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c index a03f117325..0e15df6f81 100644 --- a/src/mainboard/tyan/s2891/mptable.c +++ b/src/mainboard/tyan/s2891/mptable.c @@ -177,7 +177,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2891/romstage.c b/src/mainboard/tyan/s2891/romstage.c index 228bd08b2e..07d0dd72cf 100644 --- a/src/mainboard/tyan/s2891/romstage.c +++ b/src/mainboard/tyan/s2891/romstage.c @@ -172,7 +172,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); if (needs_reset) { - printk_info("ht reset -\r\n"); + printk(BIOS_INFO, "ht reset -\r\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2892/acpi_tables.c b/src/mainboard/tyan/s2892/acpi_tables.c index 895a629911..303c3dd6e4 100644 --- a/src/mainboard/tyan/s2892/acpi_tables.c +++ b/src/mainboard/tyan/s2892/acpi_tables.c @@ -113,7 +113,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -131,21 +131,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 64); facs = (acpi_facs_t *) current; - printk_debug("ACPI: * FACS %p\n", facs); + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ current = ALIGN(current, 16); dsdt = (acpi_header_t *) current; - printk_debug("ACPI: * DSDT %p\n", dsdt); + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); current += ((acpi_header_t *) AmlCode)->length; memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); current = ALIGN(current, 16); fadt = (acpi_fadt_t *) current; - printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt); + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); current += sizeof(acpi_fadt_t); /* Add FADT now that we have facs and dsdt. */ @@ -154,21 +154,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 16); hpet = (acpi_hpet_t *) current; - printk_debug("ACPI: * HPET @ %p\n", hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); current = ALIGN(current, 16); madt = (acpi_madt_t *) current; - printk_debug("ACPI: * APIC/MADT @ %p\n", madt); + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); current = ALIGN(current, 16); srat = (acpi_srat_t *) current; - printk_debug("ACPI: * SRAT @ %p\n", srat); + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); @@ -176,7 +176,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ALIGN(current, 16); slit = (acpi_slit_t *) current; - printk_debug("ACPI: * SLIT @ %p\n", slit); + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); @@ -184,11 +184,11 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ALIGN(current, 16); ssdt = (acpi_header_t *)current; - printk_debug("ACPI: * SSDT @ %p\n", ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done %p.\n", (void *)current); + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); return current; } diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c index 4869b31c46..1a91b05822 100644 --- a/src/mainboard/tyan/s2892/get_bus_conf.c +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -93,7 +93,7 @@ void get_bus_conf(void) bus_ck804_4++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; bus_ck804_4 = 3; @@ -106,7 +106,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); bus_ck804_5 = bus_ck804_4+1; } @@ -118,7 +118,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; @@ -130,7 +130,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -143,7 +143,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; bus_isa = bus_8131_1+2; diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c index 094658669a..f76afc2fbb 100644 --- a/src/mainboard/tyan/s2892/irq_tables.c +++ b/src/mainboard/tyan/s2892/irq_tables.c @@ -65,7 +65,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -155,7 +155,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c index feb7cd63f9..1aff4c80ae 100644 --- a/src/mainboard/tyan/s2892/mptable.c +++ b/src/mainboard/tyan/s2892/mptable.c @@ -198,7 +198,7 @@ static void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2892/romstage.c b/src/mainboard/tyan/s2892/romstage.c index 5eadda78e5..b482e95a3e 100644 --- a/src/mainboard/tyan/s2892/romstage.c +++ b/src/mainboard/tyan/s2892/romstage.c @@ -156,7 +156,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); if (needs_reset) { - printk_info("ht reset -\n"); + printk(BIOS_INFO, "ht reset -\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2895/acpi_tables.c b/src/mainboard/tyan/s2895/acpi_tables.c index 525a959fad..b7ff5bbce8 100644 --- a/src/mainboard/tyan/s2895/acpi_tables.c +++ b/src/mainboard/tyan/s2895/acpi_tables.c @@ -138,7 +138,7 @@ unsigned long write_acpi_tables(unsigned long start) start = (start + 0x0f) & -0x10; current = start; - printk_info("ACPI: Writing ACPI tables at %lx.\n", start); + printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx.\n", start); /* We need at least an RSDP and an RSDT Table */ rsdp = (acpi_rsdp_t *) current; @@ -156,21 +156,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 64); facs = (acpi_facs_t *) current; - printk_debug("ACPI: * FACS %p\n", facs); + printk(BIOS_DEBUG, "ACPI: * FACS %p\n", facs); current += sizeof(acpi_facs_t); acpi_create_facs(facs); /* DSDT */ current = ALIGN(current, 16); dsdt = (acpi_header_t *) current; - printk_debug("ACPI: * DSDT %p\n", dsdt); + printk(BIOS_DEBUG, "ACPI: * DSDT %p\n", dsdt); current += ((acpi_header_t *) AmlCode)->length; memcpy((void*) dsdt, (void*)AmlCode, ((acpi_header_t*)AmlCode)->length); - printk_debug("ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); + printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length); current = ALIGN(current, 16); fadt = (acpi_fadt_t *) current; - printk_debug("ACPI: * FACP (FADT) @ %p\n", fadt); + printk(BIOS_DEBUG, "ACPI: * FACP (FADT) @ %p\n", fadt); current += sizeof(acpi_fadt_t); /* Add FADT now that we have facs and dsdt. */ @@ -179,21 +179,21 @@ unsigned long write_acpi_tables(unsigned long start) current = ALIGN(current, 16); hpet = (acpi_hpet_t *) current; - printk_debug("ACPI: * HPET @ %p\n", hpet); + printk(BIOS_DEBUG, "ACPI: * HPET @ %p\n", hpet); current += sizeof(acpi_hpet_t); acpi_create_hpet(hpet); acpi_add_table(rsdp, hpet); current = ALIGN(current, 16); madt = (acpi_madt_t *) current; - printk_debug("ACPI: * APIC/MADT @ %p\n", madt); + printk(BIOS_DEBUG, "ACPI: * APIC/MADT @ %p\n", madt); acpi_create_madt(madt); current += madt->header.length; acpi_add_table(rsdp, madt); current = ALIGN(current, 16); srat = (acpi_srat_t *) current; - printk_debug("ACPI: * SRAT @ %p\n", srat); + printk(BIOS_DEBUG, "ACPI: * SRAT @ %p\n", srat); acpi_create_srat(srat); current += srat->header.length; acpi_add_table(rsdp, srat); @@ -201,7 +201,7 @@ unsigned long write_acpi_tables(unsigned long start) /* SLIT */ current = ALIGN(current, 16); slit = (acpi_slit_t *) current; - printk_debug("ACPI: * SLIT @ %p\n", slit); + printk(BIOS_DEBUG, "ACPI: * SLIT @ %p\n", slit); acpi_create_slit(slit); current+=slit->header.length; acpi_add_table(rsdp,slit); @@ -209,11 +209,11 @@ unsigned long write_acpi_tables(unsigned long start) /* SSDT */ current = ALIGN(current, 16); ssdt = (acpi_header_t *)current; - printk_debug("ACPI: * SSDT @ %p\n", ssdt); + printk(BIOS_DEBUG, "ACPI: * SSDT @ %p\n", ssdt); acpi_create_ssdt_generator(ssdt, "DYNADATA"); current += ssdt->length; acpi_add_table(rsdp, ssdt); - printk_info("ACPI: done %p.\n", (void *)current); + printk(BIOS_INFO, "ACPI: done %p.\n", (void *)current); return current; } diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c index 04e9019355..cf918f0e9c 100644 --- a/src/mainboard/tyan/s2895/get_bus_conf.c +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -102,7 +102,7 @@ void get_bus_conf(void) bus_ck804_5++; } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; bus_ck804_5 = 3; @@ -113,7 +113,7 @@ void get_bus_conf(void) bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; @@ -125,7 +125,7 @@ void get_bus_conf(void) bus_8131_2++; } else { - printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); bus_8131_1 = bus_8131_0+1; bus_8131_2 = bus_8131_0+2; @@ -138,7 +138,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); bus_8131_2 = bus_8131_1+1; } @@ -155,7 +155,7 @@ void get_bus_conf(void) bus_isa++; } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); bus_ck804b_5 = bus_ck804b_4+1; bus_isa = bus_ck804b_5+1; } diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c index 468e9e5a39..414084c64a 100644 --- a/src/mainboard/tyan/s2895/irq_tables.c +++ b/src/mainboard/tyan/s2895/irq_tables.c @@ -72,7 +72,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%lx...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -174,7 +174,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c index 23494f0763..46f28003fe 100644 --- a/src/mainboard/tyan/s2895/mptable.c +++ b/src/mainboard/tyan/s2895/mptable.c @@ -226,7 +226,7 @@ static void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2895/romstage.c b/src/mainboard/tyan/s2895/romstage.c index bb953edf54..542a1ec9df 100644 --- a/src/mainboard/tyan/s2895/romstage.c +++ b/src/mainboard/tyan/s2895/romstage.c @@ -200,7 +200,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); if (needs_reset) { - printk_info("ht reset -\n"); + printk(BIOS_INFO, "ht reset -\n"); soft_reset(); } diff --git a/src/mainboard/tyan/s2912/get_bus_conf.c b/src/mainboard/tyan/s2912/get_bus_conf.c index 04f930fb12..40a1cc7718 100644 --- a/src/mainboard/tyan/s2912/get_bus_conf.c +++ b/src/mainboard/tyan/s2912/get_bus_conf.c @@ -128,7 +128,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -137,7 +137,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -150,7 +150,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ diff --git a/src/mainboard/tyan/s2912/irq_tables.c b/src/mainboard/tyan/s2912/irq_tables.c index aad569b048..6c59500ff5 100644 --- a/src/mainboard/tyan/s2912/irq_tables.c +++ b/src/mainboard/tyan/s2912/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -122,7 +122,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2912/mptable.c b/src/mainboard/tyan/s2912/mptable.c index 8887cca3bf..aa9a7c6703 100644 --- a/src/mainboard/tyan/s2912/mptable.c +++ b/src/mainboard/tyan/s2912/mptable.c @@ -147,7 +147,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c index 7ee4944a9c..e2f721bace 100644 --- a/src/mainboard/tyan/s2912_fam10/get_bus_conf.c +++ b/src/mainboard/tyan/s2912_fam10/get_bus_conf.c @@ -101,7 +101,7 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); } for(i=2; i<8;i++) { @@ -110,7 +110,7 @@ void get_bus_conf(void) m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); + printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); } } @@ -123,7 +123,7 @@ void get_bus_conf(void) m->bus_type[j] = 1; if(m->bus_isa <= busn_max) m->bus_isa = busn_max + 1; - printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); + printk(BIOS_DEBUG, "i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa); } /*I/O APICs: APIC ID Version State Address*/ diff --git a/src/mainboard/tyan/s2912_fam10/irq_tables.c b/src/mainboard/tyan/s2912_fam10/irq_tables.c index ea870a147b..b3628b65c5 100644 --- a/src/mainboard/tyan/s2912_fam10/irq_tables.c +++ b/src/mainboard/tyan/s2912_fam10/irq_tables.c @@ -76,7 +76,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) addr &= ~15; /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); @@ -131,7 +131,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->checksum = sum; } - printk_info("done.\n"); + printk(BIOS_INFO, "done.\n"); return (unsigned long) pirq_info; diff --git a/src/mainboard/tyan/s2912_fam10/mptable.c b/src/mainboard/tyan/s2912_fam10/mptable.c index b2fae1f443..4bd6c124a9 100644 --- a/src/mainboard/tyan/s2912_fam10/mptable.c +++ b/src/mainboard/tyan/s2912_fam10/mptable.c @@ -147,7 +147,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c index 29e4060243..cee8c5952f 100644 --- a/src/mainboard/tyan/s2912_fam10/romstage.c +++ b/src/mainboard/tyan/s2912_fam10/romstage.c @@ -198,7 +198,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); /* Halt if there was a built in self test failure */ report_bist_failure(bist); @@ -209,10 +209,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif val = cpuid_eax(1); - printk_debug("BSP Family_Model: %08x\n", val); - printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - printk_debug("bsp_apicid = %02x\n", bsp_apicid); - printk_debug("cpu_init_detectedx = %08x\n", cpu_init_detectedx); + printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); + printk(BIOS_DEBUG, "*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); + printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08x\n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); @@ -243,7 +243,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if CONFIG_LOGICAL_CPUS==1 /* Core0 on each node is configured. Now setup any additional cores. */ - printk_debug("start_other_cores()\n"); + printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(); post_code(0x37); wait_all_other_cores_started(bsp_apicid); @@ -253,7 +253,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #if FAM10_SET_FIDVID == 1 msr = rdmsr(0xc0010071); - printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); /* FIXME: The sb fid change may survive the warm reset and only * need to be done once.*/ @@ -271,7 +271,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* show final fid and vid */ msr=rdmsr(0xc0010071); - printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); #endif wants_reset = mcp55_early_setup_x(); @@ -284,27 +284,27 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } if (wants_reset) - printk_debug("mcp55_early_setup_x wanted additional reset!\n"); + printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); post_code(0x3B); /* It's the time to set ctrl in sysinfo now; */ - printk_debug("fill_mem_ctrl()\n"); + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); post_code(0x3D); - printk_debug("enable_smbus()\n"); + printk(BIOS_DEBUG, "enable_smbus()\n"); enable_smbus(); post_code(0x3E); memreset_setup(); post_code(0x40); - printk_debug("raminit_amdmct()\n"); + printk(BIOS_DEBUG, "raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); - printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x43); // Should never see this post code. } diff --git a/src/mainboard/tyan/s4880/mptable.c b/src/mainboard/tyan/s4880/mptable.c index a7ad8cc049..9a9eec7982 100644 --- a/src/mainboard/tyan/s4880/mptable.c +++ b/src/mainboard/tyan/s4880/mptable.c @@ -29,7 +29,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -85,7 +85,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 2); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -97,7 +97,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -109,7 +109,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -120,7 +120,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -246,7 +246,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } diff --git a/src/mainboard/tyan/s4882/mptable.c b/src/mainboard/tyan/s4882/mptable.c index cf7c59d993..92d71e4774 100644 --- a/src/mainboard/tyan/s4882/mptable.c +++ b/src/mainboard/tyan/s4882/mptable.c @@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; #if 0 - printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", + printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", dst_node, dst_link, bus_base, reg, config_map); #endif @@ -86,7 +86,7 @@ void *smp_write_config_table(void *v) /* HT chain 0 */ bus_chain_0 = node_link_to_bus(0, 1); if (bus_chain_0 == 0) { - printk_debug("ERROR - cound not find bus for node 0 chain 0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n"); bus_chain_0 = 1; } @@ -98,7 +98,7 @@ void *smp_write_config_table(void *v) bus_isa++; } else { - printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n"); bus_8111_1 = 4; bus_isa = 5; @@ -110,7 +110,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n"); bus_8131_1 = 2; } @@ -121,7 +121,7 @@ void *smp_write_config_table(void *v) } else { - printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n"); bus_8131_2 = 3; } @@ -246,7 +246,7 @@ void *smp_write_config_table(void *v) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); - printk_debug("Wrote the mp table end at: %p - %p\n", + printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } |