diff options
Diffstat (limited to 'src/mainboard/tyan/s8226')
25 files changed, 0 insertions, 4837 deletions
diff --git a/src/mainboard/tyan/s8226/BiosCallOuts.c b/src/mainboard/tyan/s8226/BiosCallOuts.c deleted file mode 100644 index ff9ea4575b..0000000000 --- a/src/mainboard/tyan/s8226/BiosCallOuts.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "AGESA.h" -#include <northbridge/amd/agesa/agesawrapper.h> -#include <northbridge/amd/agesa/BiosCallOuts.h> -#include <arch/io.h> -#include <stdlib.h> - -#ifdef __PRE_RAM__ -/* These defines are used to select the appropriate socket for the SPD read - * because this is a multi-socket design. - */ -#define PCI_REG_GPIO_48_47_46_37_CNTRL (0xA6) -#define PCI_REG_GPIO_52_to_49_CNTRL (0x50) -#define GPIO_OUT_BIT_GPIO48 (BIT3) -#define GPIO_OUT_BIT_GPIO49 (BIT0) -#define GPIO_OUT_ENABLE_BIT_GPIO48 (BIT7) -#define GPIO_OUT_ENABLE_BIT_GPIO49 (BIT4) - -static UINT8 select_socket(UINT8 socket_id) -{ - pci_devfn_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS - UINT8 value = 0; - UINT8 gpio52_to_49 = 0; - - /* Configure GPIO49,48 to select the desired socket - * GPIO49,48 control the IDTQS3253 S1,S0 - * S1 S0 true table - * 0 0 channel 0 - * 0 1 channel 1 - * 1 0 channel 2 - Socket 0 - * 1 1 channel 3 - Socket 1 - * Note: Above is abstracted from Schematic. But actually it seems to be other way. - * 1 0 channel 2 - Socket 1 - * 1 1 channel 3 - Socket 0 - * Note: The DIMMs need to be plugged in from the farthest slot for each channel. - */ - gpio52_to_49 = pci_read_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL); - value = gpio52_to_49 | GPIO_OUT_BIT_GPIO49; // Output of GPIO49 is always forced to "1" - value &= ~(GPIO_OUT_ENABLE_BIT_GPIO49); // 0=Output Enabled, 1=Tristate - pci_write_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL, value); - - value = pci_read_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL); - value &= ~(GPIO_OUT_BIT_GPIO48); - value |= (~(socket_id & 1)) << 3; // Output of GPIO48 is inverse of SocketId - value &= ~(GPIO_OUT_ENABLE_BIT_GPIO48); // 0=Output Enabled, 1=Tristate - pci_write_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL, value); - - return gpio52_to_49; -} - -static void restore_socket(UINT8 original_value) -{ - pci_devfn_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS - pci_write_config8(sm_dev, PCI_REG_GPIO_52_to_49_CNTRL, original_value); - - // TODO: Restore previous GPIO48 configurations? - //pci_write_config8(sm_dev, PCI_REG_GPIO_48_47_46_37_CNTRL, gpio48_47_46_37_save); -} -#endif - -static AGESA_STATUS board_ReadSpd (UINT32 Func, UINTN Data, VOID *ConfigPtr); - -const BIOS_CALLOUT_STRUCT BiosCallouts[] = -{ - {AGESA_DO_RESET, agesa_Reset }, - {AGESA_READ_SPD, board_ReadSpd }, - {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported }, - {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp }, - {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData }, - {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_DRAM_INIT, agesa_NoopSuccess }, - {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess }, -}; -const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts); - -static AGESA_STATUS board_ReadSpd (UINT32 Func, UINTN Data, VOID *ConfigPtr) -{ - AGESA_STATUS Status; -#ifdef __PRE_RAM__ - UINT8 original_value = 0; - - if (ConfigPtr == NULL) - return AGESA_ERROR; - - original_value = select_socket(((AGESA_READ_SPD_PARAMS *)ConfigPtr)->SocketId); - - Status = agesa_ReadSpd (Func, Data, ConfigPtr); - - restore_socket(original_value); -#else - Status = AGESA_UNSUPPORTED; -#endif - - return Status; -} diff --git a/src/mainboard/tyan/s8226/Kconfig b/src/mainboard/tyan/s8226/Kconfig deleted file mode 100644 index 71ee5b80a0..0000000000 --- a/src/mainboard/tyan/s8226/Kconfig +++ /dev/null @@ -1,72 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -if BOARD_TYAN_S8226 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select AGESA_LEGACY - select CPU_AMD_AGESA_FAMILY15 - select CPU_AMD_SOCKET_C32 - select NORTHBRIDGE_AMD_AGESA_FAMILY15 - select NORTHBRIDGE_AMD_CIMX_RD890 - select SOUTHBRIDGE_AMD_CIMX_SB700 - select SUPERIO_WINBOND_W83627DHG - select SUPERIO_NUVOTON_WPCM450 - select DRIVERS_I2C_W83795 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select HAVE_ACPI_TABLES - select BOARD_ROMSIZE_KB_4096 - -config MAINBOARD_DIR - string - default tyan/s8226 - -config MAINBOARD_PART_NUMBER - string - default "S8226" - -config HW_MEM_HOLE_SIZEK - hex - default 0x200000 - -config MAX_CPUS - int - default 64 - -config HW_MEM_HOLE_SIZE_AUTO_INC - bool - default n - -config IRQ_SLOT_COUNT - int - default 11 - -config ONBOARD_VGA_IS_PRIMARY - bool - default y - -config VGA_BIOS - bool - default n - -config VGA_BIOS_ID - string - depends on VGA_BIOS - default "1a03,2000" - -endif # BOARD_TYAN_S8226 diff --git a/src/mainboard/tyan/s8226/Kconfig.name b/src/mainboard/tyan/s8226/Kconfig.name deleted file mode 100644 index 881e56fafb..0000000000 --- a/src/mainboard/tyan/s8226/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_TYAN_S8226 - bool "S8226" diff --git a/src/mainboard/tyan/s8226/Makefile.inc b/src/mainboard/tyan/s8226/Makefile.inc deleted file mode 100644 index 0868bc22d0..0000000000 --- a/src/mainboard/tyan/s8226/Makefile.inc +++ /dev/null @@ -1,32 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -romstage-y += rd890_cfg.c -romstage-y += sb700_cfg.c -romstage-y += buildOpts.c -romstage-y += BiosCallOuts.c -romstage-y += OemCustomize.c - -ramstage-y += rd890_cfg.c -ramstage-y += sb700_cfg.c -ramstage-y += buildOpts.c -ramstage-y += BiosCallOuts.c -ramstage-y += OemCustomize.c - -AGESA_PREFIX ?= $(src)/vendorcode/amd/agesa -CIMX_PREFIX ?= $(src)/vendorcode/amd/cimx -AGESA_ROOT ?= $(AGESA_PREFIX)/f15 -NB_CIMX_ROOT ?= $(CIMX_PREFIX)/rd890 -SB_CIMX_ROOT ?= $(CIMX_PREFIX)/sb700 diff --git a/src/mainboard/tyan/s8226/OemCustomize.c b/src/mainboard/tyan/s8226/OemCustomize.c deleted file mode 100644 index f38ff06faf..0000000000 --- a/src/mainboard/tyan/s8226/OemCustomize.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <northbridge/amd/agesa/agesawrapper.h> -#include <PlatformMemoryConfiguration.h> - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -//reference BKDG Table87: works -#define F15_WL_SEED 0x3B //family15 BKDG recommand 3B RDIMM, 1A UDIMM. -#define SEED_A 0x54 -#define SEED_B 0x4D -#define SEED_C 0x45 -#define SEED_D 0x40 - -#define F10_WL_SEED 0x3B //family10 BKDG recommand 3B RDIMM, 1A UDIMM. -//4B 41 51 - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - - WRITE_LEVELING_SEED( - ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, - F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, - F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, - F15_WL_SEED), - - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_A, ALL_DIMMS, - SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, - SEED_A), - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_B, ALL_DIMMS, - SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, - SEED_B), - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_C, ALL_DIMMS, - SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, - SEED_C), - HW_RXEN_SEED( - ANY_SOCKET, CHANNEL_D, ALL_DIMMS, - SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, - SEED_D), - - NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 3), //max 3 - PSO_END -}; - -const struct OEM_HOOK OemCustomize = { -}; diff --git a/src/mainboard/tyan/s8226/OptionsIds.h b/src/mainboard/tyan/s8226/OptionsIds.h deleted file mode 100644 index 079d6b2b84..0000000000 --- a/src/mainboard/tyan/s8226/OptionsIds.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/** - * @file - * - * IDS Option File - * - * This file is used to switch on/off IDS features. - * - */ -#ifndef _OPTION_IDS_H_ -#define _OPTION_IDS_H_ - -/** - * - * This file generates the defaults tables for the Integrated Debug Support - * Module. The documented build options are imported from a user controlled - * file for processing. The build options for the Integrated Debug Support - * Module are listed below: - * - * IDSOPT_IDS_ENABLED - * IDSOPT_ERROR_TRAP_ENABLED - * IDSOPT_CONTROL_ENABLED - * IDSOPT_TRACING_ENABLED - * IDSOPT_PERF_ANALYSIS - * IDSOPT_ASSERT_ENABLED - * IDS_DEBUG_PORT - * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED - * - **/ - -#define IDSOPT_IDS_ENABLED TRUE -//#define IDSOPT_CONTROL_ENABLED TRUE -//#define IDSOPT_TRACING_ENABLED TRUE -//#define IDSOPT_PERF_ANALYSIS TRUE -#define IDSOPT_ASSERT_ENABLED TRUE -//#define CONFIG_REDIRECT_IDS_HDT_CONSOLE_TO_SERIAL TRUE -//#undef IDSOPT_DEBUG_ENABLED -//#define IDSOPT_DEBUG_ENABLED FALSE -//#undef IDSOPT_HOST_SIMNOW -//#define IDSOPT_HOST_SIMNOW FALSE -//#undef IDSOPT_HOST_HDT -//#define IDSOPT_HOST_HDT FALSE -//#define IDS_DEBUG_PORT 0x80 - -#endif diff --git a/src/mainboard/tyan/s8226/acpi/routing.asl b/src/mainboard/tyan/s8226/acpi/routing.asl deleted file mode 100644 index f66b1670fd..0000000000 --- a/src/mainboard/tyan/s8226/acpi/routing.asl +++ /dev/null @@ -1,218 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "routing.asl" - } -*/ - -/* Routing is in System Bus scope */ -Scope(\_SB) { - Name(PR0, Package(){ - /* NB devices */ - /* Bus 0, Dev 0 - SR5650 HT */ - Package() { 0xFFFF, Zero, INTA, Zero }, - - /* Bus 0, Dev 1 - CLKCONFIG */ - - /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */ - Package() {0x0002FFFF, 0, INTE, 0 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package() {0x0004FFFF, 0, INTE, 0 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - - /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ - - /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ - - /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ - - /* Bus 0, Dev 9 - PCIe Bridge */ - - /* Bus 0, Dev a - PCIe Bridge */ - - /* Bus 0, Dev b - PCIe Bridge */ - Package() {0x000BFFFF, 0, INTG, 0 }, - - /* Bus 0, Dev c - PCIe Bridge */ - Package() {0x000CFFFF, 0, INTG, 0 }, - - /* Bus 0, Dev d - PCIe Bridge for Intel 82576 Giga NIC*/ - Package() {0x000DFFFF, 0, INTG, 0 }, - - /* SB devices */ - /* Bus 0, Dev 17 - SATA controller */ - Package() {0x0011FFFF, 0, INTG, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package() {0x0012FFFF, 0, INTA, 0 }, - Package() {0x0012FFFF, 1, INTB, 0 }, - Package() {0x0012FFFF, 2, INTC, 0 }, - Package() {0x0012FFFF, 3, INTD, 0 }, - - Package() {0x0013FFFF, 0, INTC, 0 }, - Package() {0x0013FFFF, 1, INTD, 0 }, - Package() {0x0013FFFF, 2, INTA, 0 }, - Package() {0x0013FFFF, 2, INTB, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */ - Package(){0x0014FFFF, 0, INTA, 0 }, - Package(){0x0014FFFF, 1, INTB, 0 }, - Package(){0x0014FFFF, 2, INTC, 0 }, - Package(){0x0014FFFF, 3, INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - SR5650 HT */ - Package() { 0xFFFF, Zero, Zero, 16 }, - - /* Bus 0, Dev 1 - CLKCONFIG */ - - /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot (GFX0) */ - Package() {0x0002FFFF, 0, 0, 0x34 }, - - /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ - - /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ - Package() {0x0004FFFF, 0, 0, 0x34 }, - - /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ - - /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ - - /* Bus 0, Dev 7 - PCIe Bridge */ - - /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ - - /* Bus 0, Dev 9 - PCIe Bridge */ - - /* Bus 0, Dev A - PCIe Bridge */ - - /* Bus 0, Dev B - PCIe Bridge */ - Package() {0x000BFFFF, 0, 0, 0x36 }, - - /* Bus 0, Dev C - PCIe Bridge */ - Package() {0x000CFFFF, 0, 0, 0x36 }, - - /* Bus 0, Dev D - PCIe Bridge For Intel 82576 Giga NIC*/ - Package() {0x000DFFFF, 0, 0, 0x36 }, - - /* SB devices in APIC mode */ - /* Bus 0, Dev 17 - SATA controller */ - Package() {0x0011FFFF, 0, 0, 0x16 }, - - /* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5; - * EHCI, dev 18, 19 func 2 */ - Package( ){0x0012FFFF, 0, 0, 16 }, - Package() {0x0012FFFF, 1, 0, 17 }, - Package() {0x0012FFFF, 2, 0, 18 }, - Package() {0x0012FFFF, 3, 0, 19 }, - - Package() {0x0013FFFF, 0, 0, 18 }, - Package() {0x0013FFFF, 1, 0, 19 }, - Package() {0x0013FFFF, 2, 0, 16 }, - Package() {0x0013FFFF, 3, 0, 17 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */ - Package() {0x0014FFFF, 0, 0, 16 }, - Package() {0x0014FFFF, 1, 0, 17 }, - Package() {0x0014FFFF, 2, 0, 18 }, - Package() {0x0014FFFF, 3, 0, 19 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 4 */ - Package() {0x0000FFFF, 0, INTC, 0 }, - Package() {0x0000FFFF, 1, INTD, 0 }, - Package() {0x0000FFFF, 2, INTA, 0 }, - Package() {0x0000FFFF, 3, INTB, 0 }, - }) - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 0x18 }, - Package(){0x0000FFFF, 1, 0, 0x19 }, - Package(){0x0000FFFF, 2, 0, 0x1A }, - Package(){0x0000FFFF, 3, 0, 0x1B }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 0x2C }, - Package(){0x0000FFFF, 1, 0, 0x2D }, - Package(){0x0000FFFF, 2, 0, 0x2E }, - Package(){0x0000FFFF, 3, 0, 0x2F }, - }) - - Name(PSb, Package(){ - /* PCIe slot - Hooked to PCIe slot 11 */ - Package(){0x0000FFFF, 0, INTD, 0 }, - Package(){0x0000FFFF, 1, INTA, 0 }, - Package(){0x0000FFFF, 2, INTB, 0 }, - Package(){0x0000FFFF, 3, INTC, 0 }, - }) - Name(APSb, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 0x20 }, - Package(){0x0000FFFF, 1, 0, 0x21 }, - Package(){0x0000FFFF, 2, 0, 0x22 }, - Package(){0x0000FFFF, 3, 0, 0x23 }, - }) - - Name(PSc, Package(){ - /* PCIe slot - Hooked to PCIe slot 12 */ - Package(){0x0000FFFF, 0, INTA, 0 }, - Package(){0x0000FFFF, 1, INTB, 0 }, - Package(){0x0000FFFF, 2, INTC, 0 }, - Package(){0x0000FFFF, 3, INTD, 0 }, - }) - Name(APSc, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 0x24 }, - Package(){0x0000FFFF, 1, 0, 0x25 }, - Package(){0x0000FFFF, 2, 0, 0x26 }, - Package(){0x0000FFFF, 3, 0, 0x27 }, - }) - - Name(PSd, Package(){ - /* PCIe slot - Hooked to PCIe slot 13 */ - Package(){0x0000FFFF, 0, INTB, 0 }, - Package(){0x0000FFFF, 1, INTC, 0 }, - Package(){0x0000FFFF, 2, INTD, 0 }, - Package(){0x0000FFFF, 3, INTA, 0 }, - }) - Name(APSd, Package(){ - /* PCIe slot - Hooked to PCIe */ - Package(){0x0000FFFF, 0, 0, 0x28 }, - Package(){0x0000FFFF, 1, 0, 0x29 }, - Package(){0x0000FFFF, 2, 0, 0x2A }, - Package(){0x0000FFFF, 3, 0, 0x2B }, - }) -} diff --git a/src/mainboard/tyan/s8226/acpi/sata.asl b/src/mainboard/tyan/s8226/acpi/sata.asl deleted file mode 100644 index 9e0e535da6..0000000000 --- a/src/mainboard/tyan/s8226/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00110000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/tyan/s8226/acpi/usb.asl b/src/mainboard/tyan/s8226/acpi/usb.asl deleted file mode 100644 index 0f8ca9c0ab..0000000000 --- a/src/mainboard/tyan/s8226/acpi/usb.asl +++ /dev/null @@ -1,157 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -/* -DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 - ) - { - #include "usb.asl" - } -*/ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB.PT9D) - } - } - } -} diff --git a/src/mainboard/tyan/s8226/acpi_tables.c b/src/mainboard/tyan/s8226/acpi_tables.c deleted file mode 100644 index 4221992601..0000000000 --- a/src/mainboard/tyan/s8226/acpi_tables.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/acpigen.h> -#include <arch/ioapic.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -unsigned long acpi_fill_madt(unsigned long current) -{ - device_t dev; - u32 dword; - u32 gsi_base = 0; - u32 apicid_sp5100; - u32 apicid_sr5650; - - /* - * AGESA v5 Apply apic enumeration rules - * For systems with >= 16 APICs, put the IO-APICs at 0..n and - * put the local-APICs at m..z - * For systems with < 16 APICs, put the Local-APICs at 0..n and - * put the IO-APICs at (n + 1)..z - */ - if (CONFIG_MAX_CPUS >= 16) - apicid_sp5100 = 0x0; - else - apicid_sp5100 = CONFIG_MAX_CPUS + 1; - apicid_sr5650 = apicid_sp5100 + 1; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write sp5100 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - apicid_sp5100, - IO_APIC_ADDR, - 0 - ); - - /* IOAPIC on rs5690 */ - gsi_base += IO_APIC_INTERRUPTS; /* SP5100 has 24 IOAPIC entries. */ - dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (dev) { - pci_write_config32(dev, 0xF8, 0x1); - dword = pci_read_config32(dev, 0xFC) & 0xfffffff0; - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - apicid_sr5650, - dword, - gsi_base - ); - } - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, - 0, //BUS - 0, //SOURCE - 2, //gsirq - 0 //flags - ); - - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0, 5, 1); - current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 1, 5, 1); - /* 1: LINT1 connect to NMI */ - - return current; -} diff --git a/src/mainboard/tyan/s8226/board_info.txt b/src/mainboard/tyan/s8226/board_info.txt deleted file mode 100644 index f858a4fca3..0000000000 --- a/src/mainboard/tyan/s8226/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Release year: 2010 diff --git a/src/mainboard/tyan/s8226/buildOpts.c b/src/mainboard/tyan/s8226/buildOpts.c deleted file mode 100644 index 7a3afa9262..0000000000 --- a/src/mainboard/tyan/s8226/buildOpts.c +++ /dev/null @@ -1,426 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdlib.h> - -#include "AGESA.h" -#include "AdvancedApi.h" - -/* AGESA will check the OEM configuration during preprocessing stage, - * coreboot enable -Wundef option, so we should make sure we have all contanstand defined - */ -/* MEMORY_BUS_SPEED */ -#define DDR400_FREQUENCY 200 ///< DDR 400 -#define DDR533_FREQUENCY 266 ///< DDR 533 -#define DDR667_FREQUENCY 333 ///< DDR 667 -#define DDR800_FREQUENCY 400 ///< DDR 800 -#define DDR1066_FREQUENCY 533 ///< DDR 1066 -#define DDR1333_FREQUENCY 667 ///< DDR 1333 -#define DDR1600_FREQUENCY 800 ///< DDR 1600 -#define DDR1866_FREQUENCY 933 ///< DDR 1866 -#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency - -/* QUANDRANK_TYPE*/ -#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM -#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM - -/* USER_MEMORY_TIMING_MODE */ -#define TIMING_MODE_AUTO 0 ///< Use best rate possible -#define TIMING_MODE_LIMITED 1 ///< Set user top limit -#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed - -/* POWER_DOWN_MODE */ -#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode -#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode - -/* User makes option selections here - * Comment out the items wanted to be included in the build. - * Uncomment those items you with to REMOVE from the build. - */ -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE -//#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE -//#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -////#define BLDOPT_REMOVE_ACPI_PSTATES TRUE -////#define BLDOPT_REMOVE_SRAT TRUE -////#define BLDOPT_REMOVE_SLIT TRUE -//#define BLDOPT_REMOVE_WHEA TRUE -//#define BLDOPT_REMOVE_DMI TRUE - -/*f15 Rev A1 ucode patch CpuF15OrMicrocodePatch0600011F */ -#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE - -//#define BLDOPT_REMOVE_HT_ASSIST TRUE -//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE - -/* Build configuration values here. - */ -#define BLDCFG_VRM_CURRENT_LIMIT 120000 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 0 -#define BLDCFG_PLAT_NUM_IO_APICS 3 -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_MEM_INIT_PSTATE 0 -#define BLDCFG_AMD_PSTATE_CAP_VALUE 0 - -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_SERVER - -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY//1600 -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_REGISTERED -#define BLDCFG_MEMORY_RDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE -#define BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB TRUE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING FALSE//TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE//TRUE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE//TRUE -#define BLDCFG_MEMORY_POWER_DOWN FALSE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHANNEL -#define BLDCFG_ONLINE_SPARE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY //DDR800_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -#define BLDCFG_ENABLE_ECC_FEATURE TRUE -#define BLDCFG_ECC_REDIRECTION FALSE -#define BLDCFG_SCRUB_IC_RATE 0 -#define BLDCFG_ECC_SYNC_FLOOD TRUE -#define BLDCFG_ECC_SYMBOL_SIZE 4 - -#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS -#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER - -/** - * Enable Message Based C1e CPU feature in multi-socket systems. - * BLDCFG_PLATFORM_C1E_OPDATA element be defined with a valid IO port value, - * else the feature cannot be enabled. - */ -#define BLDCFG_PLATFORM_C1E_MODE C1eModeMsgBased -#define BLDCFG_PLATFORM_C1E_OPDATA 0x80//TODO -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 -//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 - -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 -#define BLDCFG_1GB_ALIGN FALSE -//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' -//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -// - -// Select the platform control flow mode for performance tuning. -#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm - -/** - * Enable the probe filtering performance tuning feature. - * The probe filter provides filtering of broadcast probes to - * improve link bandwidth and performance for multi- node systems. - * - * This feature may interact with other performance features. - * TRUE -Enable the feature (default) if supported by all processors, - * based on revision and presence of L3 cache. - * The feature is not enabled if there are no coherent HT links. - * FALSE -Do not enable the feature regardless of the configuration. - */ -//TODO enable it, -//but AGESA set PFMode = 0; //PF Disable, HW never set PFInitDone -//hang in F10HtAssistInit() do{...} while(PFInitDone != 1) -#define BLDCFG_USE_HT_ASSIST FALSE - -/** - * The socket and link match values are platform specific - */ -CONST MANUAL_BUID_SWAP_LIST ROMDATA s8226_manual_swaplist[2] = -{ - { - /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ - HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, - - { //BUID Swap List - { //BUID Swaps - /* Each Non-coherent chain may have a list of device swaps, - * Each item specify a device will be swap from its current id to a new one - */ - /* FromID 0x00 is the chain with the southbridge */ - /* 'Move' device zero to device zero, All others are non applicable */ - {0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, - }, - - { //The ordered final BUIDs - /* Specify the final BUID to be zero, All others are non applicable */ - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - } - } - }, - - /* The 2nd element in the array merely terminates the list */ - { - HT_LIST_TERMINAL, - } -}; - -#define HYPERTRANSPORT_V31_SUPPORT 1 - -#if HYPERTRANSPORT_V31_SUPPORT -/** - * The socket and link match values are platform specific - * - */ -CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] = -{ - { - /* On the reference platform, these settings apply to all coherent links */ - HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, - - /* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */ - HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, - }, - - /* The 2nd element in the array merely terminates the list */ - { - HT_LIST_TERMINAL, - } -}; - -CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] = -{ - { - /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ - HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, - - /* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */ - HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, //Actually IO hub only support 2600M MAX - }, - - /* The 2nd element in the array merely terminates the list */ - { - HT_LIST_TERMINAL, - } -}; -#else /* HYPERTRANSPORT_V31_SUPPORT == 0 */ -CONST CPU_TO_CPU_PCB_LIMITS ROMDATA s8226_cpu2cpu_limit_list[2] = -{ - { - /* On the reference platform, these settings apply to all coherent links */ - HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, - - /* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */ - HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY, - }, - - /* The 2nd element in the array merely terminates the list */ - { - HT_LIST_TERMINAL, - } -}; - -CONST IO_PCB_LIMITS ROMDATA s8226_io_limit_list[2] = -{ - { - /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ - HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, - - /* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */ - HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY, - }, - - /* The 2nd element in the array merely terminates the list */ - { - HT_LIST_TERMINAL - } -}; -#endif /* HYPERTRANSPORT_V31_SUPPORT == 0 */ - -/** - * HyperTransport links will typically require an equalization at high frequencies. - * This is called deemphasis. - * - * Deemphasis is specified as levels, for example, -3 db. - * There are two levels for each link, its receiver deemphasis level and its DCV level, - * which is based on the far side transmitter's deemphasis. - * For each link, different levels may be required at each link frequency. - * - * Coherent connections between processors should have an entry for the port on each processor. - * There should be one entry for the host root port of each non-coherent chain. - * - * AGESA initialization code does not set deemphasis on IO Devices. - * A default is provided for internal links of MCM processors, and - * those links will generally not need deemphasis structures. - */ -CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA s8226_deemphasis_list[] = -{ - /* Socket, Link, LowFreq, HighFreq, Receiver Deemphasis, Dcv Deemphasis */ - - /* Non-coherent link deemphasis. */ - {0, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, - {0, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5}, - {0, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5}, - {0, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7}, - {0, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7}, - {0, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9}, - - {1, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, - {1, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5}, - {1, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5}, - {1, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7}, - {1, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7}, - {1, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9}, - - {2, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, - {2, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5}, - {2, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5}, - {2, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7}, - {2, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7}, - {2, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9}, - - {3, 0, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, - {3, 0, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5}, - {3, 0, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5}, - {3, 0, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7}, - {3, 0, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7}, - {3, 0, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9}, - - /* Coherent link deemphasis. */ - {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, - {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus3}, - {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus6}, - {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus6}, - {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus8}, - {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2600M, HT_FREQUENCY_MAX, DeemphasisLevelMinus11pre8, DcvLevelMinus11}, - - /* End of the list */ - { - HT_LIST_TERMINAL - } -}; - -/** - * For systems using socket infrastructure that permits strapping the SBI - * address for each socket, this should be used to provide a socket ID value. - * This is referred to as the hardware method for socket naming, and is the - * preferred solution. - */ -/* - * I do NOT know howto config socket id in simnow, - * so use this software way to make HT works in simnow, - * real hardware do not need this Socket Map. - * - * A physical socket map for a 4 G34 Sockets MCM processors topology, - * reference the mainboard schemantic in detail. - * - */ -CONST SYSTEM_PHYSICAL_SOCKET_MAP ROMDATA s8226_socket_map[] = -{ -#define HT_SOCKET0 0 -#define HT_SOCKET1 1 -#define HT_SOCKET2 2 -#define HT_SOCKET3 3 - -/** - * 0-3 are sublink 0, 4-7 are sublink 1 - */ -#define HT_LINK0A 0 -#define HT_LINK1A 1 -#define HT_LINK2A 2 -#define HT_LINK3A 3 -#define HT_LINK0B 4 -#define HT_LINK1B 5 -#define HT_LINK2B 6 -#define HT_LINK3B 7 - - /* Source Socket, Link, Target Socket */ -/* {HT_SOCKET0, HT_LINK0A, HT_SOCKET1}, - {HT_SOCKET0, HT_LINK0B, HT_SOCKET3}, - {HT_SOCKET0, HT_LINK1A, HT_SOCKET1}, - {HT_SOCKET0, HT_LINK1B, HT_SOCKET3}, - {HT_SOCKET0, HT_LINK3A, HT_SOCKET2}, - {HT_SOCKET0, HT_LINK3B, HT_SOCKET2}, - - {HT_SOCKET1, HT_LINK0A, HT_SOCKET2}, - {HT_SOCKET1, HT_LINK0B, HT_SOCKET3}, - {HT_SOCKET1, HT_LINK1A, HT_SOCKET0}, - {HT_SOCKET1, HT_LINK1B, HT_SOCKET2}, - {HT_SOCKET1, HT_LINK3A, HT_SOCKET0}, - {HT_SOCKET1, HT_LINK3B, HT_SOCKET3}, - - {HT_SOCKET2, HT_LINK0A, HT_SOCKET3}, - {HT_SOCKET2, HT_LINK0B, HT_SOCKET0}, - {HT_SOCKET2, HT_LINK1A, HT_SOCKET3}, - {HT_SOCKET2, HT_LINK1B, HT_SOCKET1}, - {HT_SOCKET2, HT_LINK3A, HT_SOCKET1}, - {HT_SOCKET2, HT_LINK3B, HT_SOCKET0}, - - {HT_SOCKET3, HT_LINK0A, HT_SOCKET2}, - {HT_SOCKET3, HT_LINK0B, HT_SOCKET1}, - {HT_SOCKET3, HT_LINK1A, HT_SOCKET1}, - {HT_SOCKET3, HT_LINK1B, HT_SOCKET0}, - {HT_SOCKET3, HT_LINK3A, HT_SOCKET0}, - {HT_SOCKET3, HT_LINK3B, HT_SOCKET2}, */ -}; - -CONST AP_MTRR_SETTINGS ROMDATA s8226_ap_mtrr_list[] = -{ - {AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E}, - {AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E}, - {AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000}, - {AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000}, - {AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000}, - {AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000}, - {AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000}, - {AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818}, - {AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818}, - {AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818}, - {AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818}, - {CPU_LIST_TERMINAL} -}; - -#define BLDCFG_BUID_SWAP_LIST &s8226_manual_swaplist -#define BLDCFG_HTFABRIC_LIMITS_LIST &s8226_cpu2cpu_limit_list -#define BLDCFG_HTCHAIN_LIMITS_LIST &s8226_io_limit_list -#define BLDCFG_PLATFORM_DEEMPHASIS_LIST &s8226_deemphasis_list -#define BLDCFG_AP_MTRR_SETTINGS_LIST &s8226_ap_mtrr_list -//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP &s8226_socket_map - - -/* Process the options... - * This file include MUST occur AFTER the user option selection settings - */ - -#include "SanMarinoInstall.h" diff --git a/src/mainboard/tyan/s8226/cmos.layout b/src/mainboard/tyan/s8226/cmos.layout deleted file mode 100644 index 956aba3689..0000000000 --- a/src/mainboard/tyan/s8226/cmos.layout +++ /dev/null @@ -1,68 +0,0 @@ -#***************************************************************************** -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -#***************************************************************************** - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/tyan/s8226/devicetree.cb b/src/mainboard/tyan/s8226/devicetree.cb deleted file mode 100644 index ddcf769ff5..0000000000 --- a/src/mainboard/tyan/s8226/devicetree.cb +++ /dev/null @@ -1,217 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip northbridge/amd/agesa/family15/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family15 - device lapic 0x10 on end - end - end - device domain 0 on - subsystemid 0x15d9 0xab11 inherit #Tyan - chip northbridge/amd/agesa/family15 # CPU side of HT root complex - device pci 18.0 on # Put IO-HUB at link_num 0, Instead of HT Link topology - chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex - device pci 0.0 on end # HT Root Complex 0x9600 - device pci 0.1 off end # CLKCONFIG - device pci 2.0 on end # GPP1 Port0 x16 SLOT4, 0x5A16 - device pci 3.0 off end # GPP1 Port1 - device pci 4.0 on end # GPP3a Port0 x4 SAS - device pci 5.0 on end # GPP3a Port1 - device pci 6.0 on end # GPP3a Port2 - device pci 7.0 on end # GPP3a Port3 - device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time - device pci 9.0 on end # GPP3a Port4 x1 NC - device pci a.0 on end # GPP3a Port5 x1 NC - device pci b.0 on end # GPP2 Port0 (Not for sr5650) - device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) - device pci d.0 on end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 - register "gpp1_configuration" = "0" # Configuration 16:0 default - register "gpp2_configuration" = "0" # Configuration 8:8 - register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 - register "port_enable" = "0x3ef6" - end #northbridge/amd/cimx/rd890 - chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB1 - device pci 12.1 on end # USB1 - device pci 12.2 on end # USB1 - device pci 13.0 on end # USB2 - device pci 13.1 on end # USB2 - device pci 13.2 on end # USB2 - device pci 14.0 on end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 off end # HDA 0x4383, s8226 not have codec. - device pci 14.3 on # LPC 0x439d - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - ## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS## - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 0x01 #keyboard - irq 0x72 = 0x0C #mouse - end - device pnp 2e.6 off # SPI - end - device pnp 2e.307 off # GPIO6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO2 - end - device pnp 2e.109 off # GPIO3 - end - device pnp 2e.209 off # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b off # HWM - io 0x60 = 0x290 - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w83627dhg - chip drivers/i2c/w83795 - register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8 - register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions - register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13 - register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1 - register "temp_dtse" = "0x03" # Enable DTS1 and DTS2 - register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8 - register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT - register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1) - register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2) - register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3) - register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4) - register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5) - register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6) - register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1 - register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2 - register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3 - register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4 - register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5 - register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6 - register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C - register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C - register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C - register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C - register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C - register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C - register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C - register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C - register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "fan1_nonstop" = "7" # Set Fan 1 minimum speed - register "fan2_nonstop" = "7" # Set Fan 2 minimum speed - register "fan3_nonstop" = "7" # Set Fan 3 minimum speed - register "fan4_nonstop" = "7" # Set Fan 4 minimum speed - register "fan5_nonstop" = "7" # Set Fan 5 minimum speed - register "fan6_nonstop" = "7" # Set Fan 6 minimum speed - register "fan7_nonstop" = "7" # Set Fan 7 minimum speed - register "fan8_nonstop" = "7" # Set Fan 8 minimum speed - register "default_speed" = "100" # All fans to full speed on power up - register "fan1_duty" = "100" # Fan 1 to full speed - register "fan2_duty" = "100" # Fan 2 to full speed - register "fan3_duty" = "100" # Fan 3 to full speed - register "fan4_duty" = "100" # Fan 4 to full speed - register "fan5_duty" = "100" # Fan 5 to full speed - register "fan6_duty" = "100" # Fan 6 to full speed - register "fan7_duty" = "100" # Fan 7 to full speed - register "fan8_duty" = "100" # Fan 8 to full speed - register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V - register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V - register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V - register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V - register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V - register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V - register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V - register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V - register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V - register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V - register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V - register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V - register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V - register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V - register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V - register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V - register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V - register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V - register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V - register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V - register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V - register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V - register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V - register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V - register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V - register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V - register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V - register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V - register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V - register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V - register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V - register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V - register "smbus_aux" = "0" # Device located on primary SMBUS - device pnp 5e on #hwm - end - end #drivers/i2c/w83795 - end # LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # USB 3 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end # southbridge/amd/cimx/sb700 - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end #f15 - - register "spdAddrLookup" = " - { - { {0xA0, 0xA4, 0xA8}, {0xA2, 0xA6, 0xAA}, }, // socket 0 - { {0xA0, 0xA4, 0xA8}, {0xA2, 0xA6, 0xAA}, }, // socket 1 - }" - end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family15/root_complex diff --git a/src/mainboard/tyan/s8226/dsdt.asl b/src/mainboard/tyan/s8226/dsdt.asl deleted file mode 100644 index 9e34a5a8c5..0000000000 --- a/src/mainboard/tyan/s8226/dsdt.asl +++ /dev/null @@ -1,1671 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* DefinitionBlock Statement */ -DefinitionBlock ( - "DSDT.AML", /* Output filename */ - "DSDT", /* Signature */ - 0x02, /* DSDT Revision, needs to be 2 for 64bit */ - "AMD ", /* OEMID */ - "COREBOOT", /* TABLE ID */ - 0x00010001 /* OEM Revision */ - ) -{ /* Start of ASL file */ - /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ - - /* Data to be patched by the BIOS during POST */ - /* FIXME the patching is not done yet! */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ - Name(PBLN, 0x0) /* Length of BIOS area */ - - Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */ - Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */ - - Name(HPBA, 0xFED00000) /* Base address of HPET table */ - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - /* Some global data */ - Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ - Name(OSV, Ones) /* Assume nothing */ - Name(PMOD, One) /* Assume APIC */ - - /* - * Processor Object - * - */ - Scope (\_PR) { /* define processor scope */ - Processor( - C000, /* name space name */ - 0x00, /* Unique number for this processor */ - 0x810, /* PBLK system I/O address !hardcoded! */ - 0x06 /* PBLKLEN for boot processor */ - ) { - //#include "acpi/cpstate.asl" - } - Processor(C001, 0x01, 0x00000000, 0x00) {} - Processor(C002, 0x02, 0x00000000, 0x00) {} - Processor(C003, 0x03, 0x00000000, 0x00) {} - Processor(C004, 0x04, 0x00000000, 0x00) {} - Processor(C005, 0x05, 0x00000000, 0x00) {} - Processor(C006, 0x06, 0x00000000, 0x00) {} - Processor(C007, 0x07, 0x00000000, 0x00) {} - Processor(C008, 0x08, 0x00000000, 0x00) {} - Processor(C009, 0x09, 0x00000000, 0x00) {} - Processor(C00A, 0x0A, 0x00000000, 0x00) {} - Processor(C00B, 0x0B, 0x00000000, 0x00) {} - Processor(C00C, 0x0C, 0x00000000, 0x00) {} - Processor(C00D, 0x0D, 0x00000000, 0x00) {} - Processor(C00E, 0x0E, 0x00000000, 0x00) {} - Processor(C00F, 0x0F, 0x00000000, 0x00) {} - Processor(C010, 0x10, 0x00000000, 0x00) {} - Processor(C011, 0x11, 0x00000000, 0x00) {} - Processor(C012, 0x12, 0x00000000, 0x00) {} - Processor(C013, 0x13, 0x00000000, 0x00) {} - Processor(C014, 0x14, 0x00000000, 0x00) {} - Processor(C015, 0x15, 0x00000000, 0x00) {} - Processor(C016, 0x16, 0x00000000, 0x00) {} - Processor(C017, 0x17, 0x00000000, 0x00) {} - Processor(C018, 0x18, 0x00000000, 0x00) {} - Processor(C019, 0x19, 0x00000000, 0x00) {} - Processor(C01A, 0x1A, 0x00000000, 0x00) {} - Processor(C01B, 0x1B, 0x00000000, 0x00) {} - Processor(C01C, 0x1C, 0x00000000, 0x00) {} - Processor(C01D, 0x1D, 0x00000000, 0x00) {} - Processor(C01E, 0x1E, 0x00000000, 0x00) {} - Processor(C01F, 0x1F, 0x00000000, 0x00) {} - Processor(C020, 0x20, 0x00000000, 0x00) {} - Processor(C021, 0x21, 0x00000000, 0x00) {} - Processor(C022, 0x22, 0x00000000, 0x00) {} - Processor(C023, 0x23, 0x00000000, 0x00) {} - Processor(C024, 0x24, 0x00000000, 0x00) {} - Processor(C025, 0x25, 0x00000000, 0x00) {} - Processor(C026, 0x26, 0x00000000, 0x00) {} - Processor(C027, 0x27, 0x00000000, 0x00) {} - Processor(C028, 0x28, 0x00000000, 0x00) {} - Processor(C029, 0x29, 0x00000000, 0x00) {} - Processor(C02A, 0x2A, 0x00000000, 0x00) {} - Processor(C02B, 0x2B, 0x00000000, 0x00) {} - Processor(C02C, 0x2C, 0x00000000, 0x00) {} - Processor(C02D, 0x2D, 0x00000000, 0x00) {} - Processor(C02E, 0x2E, 0x00000000, 0x00) {} - Processor(C02F, 0x2F, 0x00000000, 0x00) {} - Alias (C000, CPU0) - Alias (C001, CPU1) - Alias (C002, CPU2) - Alias (C003, CPU3) - Alias (C004, CPU4) - Alias (C005, CPU5) - Alias (C006, CPU6) - Alias (C007, CPU7) - Alias (C008, CPU8) - } /* End _PR scope */ - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - AINT, 0x00000008, /* Index 4 */ - SINT, 0x00000008, /* Index 5 */ - , 0x00000008, /* Index 6 */ - AAUD, 0x00000008, /* Index 7 */ - AMOD, 0x00000008, /* Index 8 */ - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100) - Field (GRAM, ByteAcc, Lock, Preserve) - { - Offset (0x10), - FLG0, 8 - } - - Scope(\_SB) { - /* PCIe Configuration Space for CONFIG_MMCONF_BUS_NUMBER busses */ - OperationRegion(PCFG, SystemMemory, PCBA, PCLN) - Field(PCFG, ByteAcc, NoLock, Preserve) { - /* Byte offsets are computed using the following technique: - * ((bus number + 1) * ((device number * 8) * 4096)) + register offset - * The 8 comes from 8 functions per device, and 4096 bytes per function config space - */ - Offset(0x00088024), /* Byte offset to SATA register 24h - Bus 0, Device 17, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(SB5, SystemMemory, STB5, 0x1000) - Field(SB5, AnyAcc, NoLock, Preserve){ - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } - - #include "acpi/routing.asl" - - Scope(\_SB) { - Method(OSFL, 0){ - if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */ - if(CondRefOf(\_OSI)) - { - Store(1, OSVR) /* Assume some form of XP */ - if (\_OSI("Windows 2006")) /* Vista */ - { - Store(2, OSVR) - } - } else { - If(WCMP(\_OS,"Linux")) { - Store(3, OSVR) /* Linux */ - } Else { - Store(4, OSVR) /* Gotta be WinCE */ - } - } - Return(OSVR) - } - - Method(_PIC, 0x01, NotSerialized) - { - If (Arg0) - { - \_SB.CIRQ() - } - Store(Arg0, PMOD) - } - Method(CIRQ, 0x00, NotSerialized){ - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){15} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKA\\_DIS\n") */ - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKA\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINA, IRQN) - Return(IRQB) - } /* Method(_SB.INTA._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKA\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKB\\_DIS\n") */ - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKB\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINB, IRQN) - Return(IRQB) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKB\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKC\\_DIS\n") */ - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKC\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINC, IRQN) - Return(IRQB) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKC\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKD\\_DIS\n") */ - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKD\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PIND, IRQN) - Return(IRQB) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKD\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKE\\_DIS\n") */ - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKE\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTE._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINE, IRQN) - Return(IRQB) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKE\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKF\\_DIS\n") */ - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKF\\_PRS\n") */ - Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINF, IRQN) - Return(IRQB) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKF\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKG\\_DIS\n") */ - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKG\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PING, IRQN) - Return(IRQB) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKG\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - /* DBGO("\\_SB\\LNKH\\_DIS\n") */ - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - /* DBGO("\\_SB\\LNKH\\_PRS\n") */ - Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(IRQB, 0x1, IRQN) - ShiftLeft(1, PINH, IRQN) - Return(IRQB) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - /* DBGO("\\_SB\\LNKH\\_CRS\n") */ - CreateWordField(ARG0, 1, IRQM) - - /* Use lowest available IRQ */ - FindSetRightBit(IRQM, Local0) - if (Local0) { - Decrement(Local0) - } - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - } /* End Scope(_SB) */ - - /* Contains the supported sleep states for this chipset */ - #include <southbridge/amd/common/acpi/sleepstates.asl> - - /* Wake status package */ - Name(WKST,Package(){Zero, Zero}) - - /* - * \_PTS - Prepare to Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2, etc - * - * Exit: - * -none- - * - * The _PTS control method is executed at the beginning of the sleep process - * for S1-S5. The sleeping value is passed to the _PTS control method. This - * control method may be executed a relatively long time before entering the - * sleep state and the OS may abort the operation without notification to - * the ACPI driver. This method cannot modify the configuration or power - * state of any device in the system. - */ - Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) - } /* End Method(\_PTS) */ - - /* - * The following method results in a "not a valid reserved NameSeg" - * warning so I have commented it out for the duration. It isn't - * used, so it could be removed. - * - * - * \_GTS OEM Going To Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - * - * Method(\_GTS, 1) { - * DBGO("\\_GTS\n") - * DBGO("From S0 to S") - * DBGO(Arg0) - * DBGO("\n") - * } - */ - - /* - * \_BFS OEM Back From Sleep method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * -none- - */ - Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - } - - /* - * \_WAK System Wake method - * - * Entry: - * Arg0=The value of the sleeping state S1=1, S2=2 - * - * Exit: - * Return package of 2 DWords - * Dword 1 - Status - * 0x00000000 wake succeeded - * 0x00000001 Wake was signaled but failed due to lack of power - * 0x00000002 Wake was signaled but failed due to thermal condition - * Dword 2 - Power Supply state - * if non-zero the effective S-state the power supply entered - */ - Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW (Arg0) - Return(WKST) - } /* End Method(\_WAK) */ - - Scope(\_GPE) { /* Start Scope GPE */ - /* General event 0 */ - Method(_L00) { - //DBGO("\\_GPE\\_L00\n") - } - - /* General event 1 */ - Method(_L01) { - //DBGO("\\_GPE\\_L01\n") - } - - /* General event 2 */ - Method(_L02) { - //DBGO("\\_GPE\\_L02\n") - } - - /* General event 3 */ - Method(_L03) { - //DBGO("\\_GPE\\_L00\n") - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* General event 4 */ - Method(_L04) { - //DBGO("\\_GPE\\_L04\n") - } - - /* General event 5 */ - Method(_L05) { - //DBGO("\\_GPE\\_L05\n") - } - - /* _L06 General event 6 - Used for GPM6, moved to USB.asl */ - /* _L07 General event 7 - Used for GPM7, moved to USB.asl */ - - /* Legacy PM event */ - Method(_L08) { - //DBGO("\\_GPE\\_L08\n") - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - //DBGO("\\_GPE\\_L09\n") - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - Method(_L0A) { - //DBGO("\\_GPE\\_L0A\n") - } - - /* USB controller PME# */ - Method(_L0B) { - //DBGO("\\_GPE\\_L0B\n") - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - Method(_L0C) { - //DBGO("\\_GPE\\_L0C\n") - } - - /* OtherTherm PME# */ - Method(_L0D) { - //DBGO("\\_GPE\\_L0D\n") - } - - /* _L0E GPM9 SCI event - Moved to USB.asl */ - - /* PCIe HotPlug event */ - Method(_L0F) { - //DBGO("\\_GPE\\_L0F\n") - } - - /* ExtEvent0 SCI event */ - Method(_L10) { - //DBGO("\\_GPE\\_L10\n") - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - //DBGO("\\_GPE\\_L11\n") - } - - /* PCIe PME# event */ - Method(_L12) { - //DBGO("\\_GPE\\_L12\n") - } - - /* _L13 GPM0 SCI event - Moved to USB.asl */ - /* _L14 GPM1 SCI event - Moved to USB.asl */ - /* _L15 GPM2 SCI event - Moved to USB.asl */ - /* _L16 GPM3 SCI event - Moved to USB.asl */ - /* _L17 GPM8 SCI event - Moved to USB.asl */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - //DBGO("\\_GPE\\_L18\n") - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBRb, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBRc, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBRd, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* _L19 GPM4 SCI event - Moved to USB.asl */ - /* _L1A GPM5 SCI event - Moved to USB.asl */ - - /* Azalia SCI event */ - Method(_L1B) { - //DBGO("\\_GPE\\_L1B\n") - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - Method(_L1C) { - //DBGO("\\_GPE\\_L1C\n") - } - - /* GPM7 SCI event - Reassigned to _L07 */ - Method(_L1D) { - //DBGO("\\_GPE\\_L1D\n") - } - - /* GPIO2 or GPIO66 SCI event */ - Method(_L1E) { - //DBGO("\\_GPE\\_L1E\n") - } - - /* _L1F SATA SCI event - Moved to sata.asl */ - - } /* End Scope GPE */ - - #include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) { /* Start \_SB scope */ - #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ - - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) { - External (TOM1) //assigned when update_ssdt() - External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ - - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Method(_PRT,0) { - If(PMOD){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBRb) { - Name(_ADR, 0x000b0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSb) } /* APIC mode */ - Return (PSb) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRb */ - - Device(PBRc) { - Name(_ADR, 0x000c0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSc) } /* APIC mode */ - Return (PSc) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRc */ - - Device(PBRd) { - Name(_ADR, 0x000d0000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PMOD){ Return(APSd) } /* APIC mode */ - Return (PSd) /* PIC Mode */ - } /* end _PRT */ - } /* end PBRd */ - - /* Describe the Southbridge devices */ - Device(STCR) { - Name(_ADR, 0x00110000) - #include "acpi/sata.asl" - } /* end STCR */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(OSVR,3)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LIBR) { - Name(_ADR, 0x00140003) - /* Method(_INI) { - * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") - } */ /* End Method(_SB.SBRDG._INI) */ - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){8} - IO(Decode16,0x0070, 0x0070, 0, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){0} - IO(Decode16, 0x0040, 0x0040, 0, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 0, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQNoFlags(){2} - IO(Decode16,0x0020, 0x0020, 0, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,BusMaster,Transfer8){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) - IRQNoFlags(){13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device (PS2M) { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x00, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x00, 0x01) - IRQNoFlags () {12} - }) - Method (_STA, 0, NotSerialized) { - And (FLG0, 0x04, Local0) - If (LEqual (Local0, 0x04)) { - Return (0x0F) - } Else { - Return (0x00) - } - } - } - - Device (PS2K) { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) { - And (FLG0, 0x04, Local0) - If (LEqual (Local0, 0x04)) { - Return (0x0F) - } Else { - Return (0x00) - } - } - Name (_CRS, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x00, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x00, 0x01) - IRQNoFlags () {1} - }) - } - -#if 0 //acpi_create_hpet - Device(HPET) { - Name(_HID,EISAID("PNP0103")) - Name(CRS, ResourceTemplate() { - IRQNoFlags () {0} - IRQNoFlags () {2} - IRQNoFlags () {8} - Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, MNT) /* 1kb reserved space */ - }) - Method(_STA, 0, NotSerialized) { - Return(0x0F) /* sata is visible */ - } - Method(_CRS, 0, NotSerialized) { - CreateDwordField(CRS, ^MNT._BAS, HPT) - Store(HPBA, HPT) - Return(CRS) - } - } /* End Device(_SB.PCI0.LIBR.HPET) */ -#endif - } /* end LIBR */ - - Device(HPBR) { - Name(_ADR, 0x00140004) - } /* end HostPciBr */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - } /* end Ac97modem */ - - /* ITE8718 Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the 8718 MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* 8718 magic number */ - } - /* Exit the 8718 MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - /* - * Keyboard PME is routed to SB700 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("8718F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 1) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - - Name (CRS, ResourceTemplate () - { - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, // Granularity - 0x0000, // Range Minimum - 0x00FF, // Range Maximum - 0x0000, // Translation Offset - 0x0100, // Length - ,,) - IO (Decode16, - 0x0CF8, // Range Minimum - 0x0CF8, // Range Maximum - 0x01, // Alignment - 0x08, // Length - ) - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Granularity - 0x0000, // Range Minimum - 0x03AF, // Range Maximum - 0x0000, // Translation Offset - 0x03B0, // Length - ,, , TypeStatic) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Granularity - 0x03E0, // Range Minimum - 0x0CF7, // Range Maximum - 0x0000, // Translation Offset - 0x0918, // Length - ,, , TypeStatic) - - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Granularity - 0x03B0, // Range Minimum - 0x03BB, // Range Maximum - 0x0000, // Translation Offset - 0x000C, // Length - ,, , TypeStatic) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Granularity - 0x03C0, // Range Minimum - 0x03DF, // Range Maximum - 0x0000, // Translation Offset - 0x0020, // Length - ,, , TypeStatic) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Granularity - 0x0D00, // Range Minimum - 0xFFFF, // Range Maximum - 0x0000, // Translation Offset - 0xF300, // Length - ,, , TypeStatic) - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) // VGA memory space - - Memory32Fixed (ReadOnly, - 0xE0000000, // Address Base - 0x10000000, // Address Length, (1MB each Bus, 256 Buses by default) - MMIO) - }) - - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (CRS, \_SB.PCI0.MMIO._BAS, BAS1) - CreateDWordField (CRS, \_SB.PCI0.MMIO._LEN, LEN1) - - /* - * Declare memory between TOM1 and 4GB as available - * for PCI MMIO. - * Use ShiftLeft to avoid 64bit constant (for XP). - * This will work even if the OS does 32bit arithmetic, as - * 32bit (0x00000000 - TOM1) will wrap and give the same - * result as 64bit (0x100000000 - TOM1). - */ - Store(TOM1, BAS1) - ShiftLeft(0x10000000, 4, Local0) - Subtract(Local0, TOM1, Local0) - Store(Local0, LEN1) - //DBGO(TOM1) - - Return (CRS) - } - - /* - * - * FIRST METHOD CALLED UPON BOOT - * - * 1. If debugging, print current OS and ACPI interpreter. - * 2. Get PCI Interrupt routing from ACPI VSM, this - * value is based on user choice in BIOS setup. - */ - Method(_INI, 0) { - /* DBGO("\\_SB\\_INI\n") */ - /* DBGO(" DSDT.ASL code from ") */ - /* DBGO(__DATE__) */ - /* DBGO(" ") */ - /* DBGO(__TIME__) */ - /* DBGO("\n Sleep states supported: ") */ - /* DBGO("\n") */ - /* DBGO(" \\_OS=") */ - /* DBGO(\_OS) */ - /* DBGO("\n \\_REV=") */ - /* DBGO(\_REV) */ - /* DBGO("\n") */ - - /* Determine the OS we're running on */ - OSFL() - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\SBRI, 0x13)) { - * Store(0,\PWDE) - *} - */ - } /* End Method(_SB._INI) */ - } /* End Device(PCI0) */ - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - - #include <southbridge/amd/cimx/sb800/acpi/smbus.asl> - - /* THERMAL */ - Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ - } -} -/* End of ASL file */ diff --git a/src/mainboard/tyan/s8226/fadt.c b/src/mainboard/tyan/s8226/fadt.c deleted file mode 100644 index fda488f7fe..0000000000 --- a/src/mainboard/tyan/s8226/fadt.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include "Platform.h" /*sb700 platform header*/ - -#ifndef ACPI_BLK_BASE - #define ACPI_BLK_BASE PM1_EVT_BLK_ADDRESS -#endif - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - printk(BIOS_DEBUG, "ACPI_BLK_BASE: 0x%04x\n", ACPI_BLK_BASE); - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, "AMD ", 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->asl_compiler_revision = 0; - - if ((uintptr_t)facs > 0xffffffff) - printk(BIOS_DEBUG, "ACPI: FACS lives above 4G\n"); - else - fadt->firmware_ctrl = (uintptr_t)facs; - - if ((uintptr_t)dsdt > 0xffffffff) - printk(BIOS_DEBUG, "ACPI: DSDT lives above 4G\n"); - else - fadt->dsdt = (uintptr_t)dsdt; - - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, PM1_CNT_BLK_ADDRESS); /* set SCI_EN */ - fadt->pm1a_evt_blk = PM1_EVT_BLK_ADDRESS; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = PM1_CNT_BLK_ADDRESS; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK_ADDRESS; - fadt->pm_tmr_blk = PM1_TMR_BLK_ADDRESS; - fadt->gpe0_blk = GPE0_BLK_ADDRESS; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = ((uintptr_t)facs) & 0xffffffff; - fadt->x_firmware_ctl_h = ((uint64_t)(uintptr_t)facs) >> 32; - fadt->x_dsdt_l = ((uintptr_t)dsdt) & 0xffffffff; - fadt->x_dsdt_h = ((uint64_t)(uintptr_t)dsdt) >> 32; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = PM1_EVT_BLK_ADDRESS; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = PM1_CNT_BLK_ADDRESS; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK_ADDRESS; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = PM1_TMR_BLK_ADDRESS; - fadt->x_pm_tmr_blk.addrh = 0x0; - - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = GPE0_BLK_ADDRESS; - fadt->x_gpe0_blk.addrh = 0x0; - - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/tyan/s8226/irq_tables.c b/src/mainboard/tyan/s8226/irq_tables.c deleted file mode 100644 index 52a99e77dd..0000000000 --- a/src/mainboard/tyan/s8226/irq_tables.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = 0; - pirq->rtr_devfn = PCI_DEVFN(0x14, 4); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4), - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/tyan/s8226/mainboard.c b/src/mainboard/tyan/s8226/mainboard.c deleted file mode 100644 index caa43f3470..0000000000 --- a/src/mainboard/tyan/s8226/mainboard.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <boot/tables.h> -#include <device/pci_def.h> -#include <NbPlatform.h> -#include "chip.h" - -void set_pcie_dereset(void *nbconfig); -void set_pcie_reset(void *nbconfig); - -/** - * - */ -void set_pcie_reset(void *nbconfig) -{ -} - -/** - * Mainboard specific RD890 CIMx callback - * Release Resets to PCIe Links - * For Both SR56X0 chips, PCIE_RESET_GPIO1 to reset pcie - */ -void set_pcie_dereset(void *nbconfig) -{ - //u32 nb_dev = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0); - u32 i; - u32 val; - u32 nb_addr; - - val = 0x00000007UL; - AMD_NB_CONFIG_BLOCK *pConfig = (AMD_NB_CONFIG_BLOCK*)nbconfig; - for (i = 0; i < MAX_NB_COUNT; i ++) { - nb_addr = pConfig->Northbridges[i].NbPciAddress.AddressValue | NB_HTIU_INDEX; - LibNbPciIndexRMW(nb_addr, - NB_HTIU_REGA8, - AccessS3SaveWidth32, - ~val, - val, - &(pConfig->Northbridges[i])); - } -} - - -/************************************************* - * enable the dedicated function in s8226 board. - *************************************************/ -static void mainboard_enable(device_t dev) -{ - printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/tyan/s8226/mptable.c b/src/mainboard/tyan/s8226/mptable.c deleted file mode 100644 index 31379a6f56..0000000000 --- a/src/mainboard/tyan/s8226/mptable.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - u32 apicid_sp5100; - u32 apicid_sr5650; - device_t dev; - u32 *dword; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &bus_isa); - - /* - * AGESA v5 Apply apic enumeration rules - * For systems with >= 16 APICs, put the IO-APICs at 0..n and - * put the local-APICs at m..z - * For systems with < 16 APICs, put the Local-APICs at 0..n and - * put the IO-APICs at (n + 1)..z - */ - if (CONFIG_MAX_CPUS >= 16) - apicid_sp5100 = 0x0; - else - apicid_sp5100 = CONFIG_MAX_CPUS + 1; - apicid_sr5650 = apicid_sp5100 + 1; - - dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - if (dev) { - /* Set SP5100 IOAPIC ID */ - dword = (u32 *)(uintptr_t)(pci_read_config32(dev, 0x74) & 0xfffffff0); - smp_write_ioapic(mc, apicid_sp5100, 0x20, dword); - -#ifdef UNUSED_CODE - u8 byte; - /* Initialize interrupt mapping */ - /* aza */ - byte = pci_read_config8(dev, 0x63); - byte &= 0xf8; - byte |= 0; /* 0: INTA, ...., 7: INTH */ - pci_write_config8(dev, 0x63, byte); - /* SATA */ - dword = pci_read_config32(dev, 0xAC); - dword = dword & ~(7 << 26); - dword = dword | (6 << 26); /* 0: INTA, ...., 7: INTH */ - /* dword |= 1 << 22; PIC and APIC co exists */ - pci_write_config32(dev, 0xAC, dword); -#endif - - /* - * 00:12.0: PROG SATA : INT F - * 00:13.0: INTA USB_0 - * 00:13.1: INTB USB_1 - * 00:13.2: INTC USB_2 - * 00:13.3: INTD USB_3 - * 00:13.4: INTC USB_4 - * 00:13.5: INTD USB2 - * 00:14.1: INTA IDE - * 00:14.2: Prog HDA : INT E - * 00:14.5: INTB ACI - * 00:14.6: INTB MCI - */ - - /* Set RS5650 IOAPIC ID */ - dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (dev) { - pci_write_config32(dev, 0xF8, 0x1); - dword = (u32 *)(uintptr_t)(pci_read_config32(dev, 0xFC) & 0xfffffff0); - smp_write_ioapic(mc, apicid_sr5650, 0x20, dword); - } - - } - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ -#define IO_LOCAL_INT(type, intr, apicid, pin) \ - smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); - - mptable_add_isa_interrupts(mc, bus_isa, apicid_sp5100, 0); - - /* PCI interrupts are level triggered, and are - * associated with a specific bus/device/function tuple. - */ -#define PCI_INT(bus, dev, int_sign, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sp5100, (pin)) - - /* SMBUS */ - //PCI_INT(0x0, 0x14, 0x0, 0x10); //not generate interrupt, 3Ch hardcoded to 0 - - /* HD Audio */ - PCI_INT(0x0, 0x14, 0x2, 0x10); - - /* USB */ - /* OHCI0, OHCI1 hard-wired to 01h, corresponding to using INTA# */ - /* EHCI hard-wired to 02h, corresponding to using INTB# */ - /* USB1 */ - PCI_INT(0x0, 0x12, 0x0, 0x10); /* OHCI0 Port 0~2 */ - PCI_INT(0x0, 0x12, 0x1, 0x10); /* OHCI1 Port 3~5 */ - PCI_INT(0x0, 0x12, 0x2, 0x11); /* EHCI Port 0~5 */ - - /* USB2 */ - PCI_INT(0x0, 0x13, 0x0, 0x10); /* OHCI0 Port 6~8 */ - PCI_INT(0x0, 0x13, 0x1, 0x10); /* OHCI1 Port 9~11 */ - PCI_INT(0x0, 0x13, 0x2, 0x11); /* EHCI Port 6~11 */ - - /* USB3 EHCI hard-wired to 03h, corresponding to using INTC# */ - PCI_INT(0x0, 0x14, 0x5, 0x12); /* OHCI0 Port 12~13 */ - - /* SATA */ - PCI_INT(0x0, 0x11, 0x0, 0x16); //6, INTG - - /* PCI slots */ - dev = dev_find_slot(0, PCI_DEVFN(0x14, 4)); - if (dev && dev->enabled) { - u8 bus_pci = dev->link_list->secondary; - /* PCI_SLOT 0. */ - PCI_INT(bus_pci, 0x5, 0x0, 0x14); - PCI_INT(bus_pci, 0x5, 0x1, 0x15); - PCI_INT(bus_pci, 0x5, 0x2, 0x16); - PCI_INT(bus_pci, 0x5, 0x3, 0x17); - - /* PCI_SLOT 1. */ - PCI_INT(bus_pci, 0x6, 0x0, 0x15); - PCI_INT(bus_pci, 0x6, 0x1, 0x16); - PCI_INT(bus_pci, 0x6, 0x2, 0x17); - PCI_INT(bus_pci, 0x6, 0x3, 0x14); - - /* PCI_SLOT 2. */ - PCI_INT(bus_pci, 0x7, 0x0, 0x16); - PCI_INT(bus_pci, 0x7, 0x1, 0x17); - PCI_INT(bus_pci, 0x7, 0x2, 0x14); - PCI_INT(bus_pci, 0x7, 0x3, 0x15); - } - - /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0); - IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/tyan/s8226/platform_cfg.h b/src/mainboard/tyan/s8226/platform_cfg.h deleted file mode 100644 index f5a5c73882..0000000000 --- a/src/mainboard/tyan/s8226/platform_cfg.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _PLATFORM_CFG_H_ -#define _PLATFORM_CFG_H_ - - -/* northbridge customize options */ -/** - * Max number of northbridges in the system - */ -#define MAX_NB_COUNT 1 //TODO: only 1 NB tested - -/** - * Enable check for PCIe endpoint to be ready for PCI enumeration. - * - */ -//#define EPREADY_WORKAROUND_DISABLED - -/** - * Enable IOMMU support. Initialize IOMMU subsystem, generate IVRS ACPI table. - * - */ -#define IOMMU_SUPPORT_DISABLE //TODO: enable it - -/** - * Disable server PCIe hotplug support. - */ - -//#define HOTPLUG_SUPPORT_DISABLED - -/** - * Disable support for device number remapping for PCIe portsserver PCIe hotplug support. - */ - -//#define DEVICE_REMAP_DISABLE - -#endif //_PLATFORM_CFG_H_ diff --git a/src/mainboard/tyan/s8226/rd890_cfg.c b/src/mainboard/tyan/s8226/rd890_cfg.c deleted file mode 100644 index 9bbb02a50c..0000000000 --- a/src/mainboard/tyan/s8226/rd890_cfg.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "NbPlatform.h" -#include "rd890_cfg.h" -#include "northbridge/amd/cimx/rd890/chip.h" -#include "nbInitializer.h" -#include <string.h> -#include <arch/ioapic.h> - -#ifndef __PRE_RAM__ -#include <device/device.h> -extern void set_pcie_reset(void *config); -extern void set_pcie_dereset(void *config); - -/** - * Platform dependent configuration at ramstage - */ -static void nb_platform_config(device_t nb_dev, AMD_NB_CONFIG *NbConfigPtr) -{ - u16 i; - PCIE_CONFIG *pPcieConfig = NbConfigPtr->pPcieConfig; - //AMD_NB_CONFIG_BLOCK *ConfigPtr = GET_BLOCK_CONFIG_PTR(NbConfigPtr); - struct northbridge_amd_cimx_rd890_config *rd890_info = NULL; - DEFAULT_PLATFORM_CONFIG(platform_config); - - /* update the platform depentent configuration by devicetree */ - rd890_info = nb_dev->chip_info; - platform_config.PortEnableMap = rd890_info->port_enable; - if (rd890_info->gpp1_configuration == 0) { - platform_config.Gpp1Config = GFX_CONFIG_AAAA; - } else if (rd890_info->gpp1_configuration == 1) { - platform_config.Gpp1Config = GFX_CONFIG_AABB; - } - if (rd890_info->gpp2_configuration == 0) { - platform_config.Gpp2Config = GFX_CONFIG_AAAA; - } else if (rd890_info->gpp2_configuration == 1) { - platform_config.Gpp2Config = GFX_CONFIG_AABB; - } - platform_config.Gpp3aConfig = rd890_info->gpp3a_configuration; - - if (platform_config.Gpp1Config != 0) { - pPcieConfig->CoreConfiguration[0] = platform_config.Gpp1Config; - } - if (platform_config.Gpp2Config != 0) { - pPcieConfig->CoreConfiguration[1] = platform_config.Gpp2Config; - } - if (platform_config.Gpp3aConfig != 0) { - pPcieConfig->CoreConfiguration[2] = platform_config.Gpp3aConfig; - } - - pPcieConfig->TempMmioBaseAddress = (UINT16)(platform_config.TemporaryMmio >> 20); - for (i = 0; i <= MAX_CORE_ID; i++) { - NbConfigPtr->pPcieConfig->CoreSetting[i].SkipConfiguration = OFF; - NbConfigPtr->pPcieConfig->CoreSetting[i].PerformanceMode = OFF; - } - for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) { - NbConfigPtr->pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen2; - } - - for (i = MIN_PORT_ID; i <= MAX_PORT_ID; i++) { - if ((platform_config.PortEnableMap & (1 << i)) != 0) { - pPcieConfig->PortConfiguration[i].PortPresent = ON; - if ((platform_config.PortGen1Map & (1 << i)) != 0) { - pPcieConfig->PortConfiguration[i].PortLinkMode = PcieLinkModeGen1; - } - if ((platform_config.PortHotplugMap & (1 << i)) != 0) { - u16 j; - pPcieConfig->PortConfiguration[i].PortHotplug = ON; /* Enable Hotplug */ - /* Set Hotplug descriptor info */ - for (j = 0; j < 8; j++) { - u32 PortDescriptor; - PortDescriptor = platform_config.PortHotplugDescriptors[j]; - if ((PortDescriptor & 0xF) == j) { - pPcieConfig->ExtPortConfiguration[j].PortHotplugDevMap = (PortDescriptor >> 4) & 3; - pPcieConfig->ExtPortConfiguration[j].PortHotplugByteMap = (PortDescriptor >> 6) & 1; - break; - } - } - } - } - } -} -#endif // __PRE_RAM__ - -/** - * @brief Entry point of Northbridge CIMx callout/CallBack - * - * prototype AGESA_STATUS (*CALLOUT_ENTRY) (UINT32 Param1, UINTN Param2, VOID* ConfigPtr); - * - * @param[in] func Northbridge CIMx CallBackId - * @param[in] data Northbridge Input Data. - * @param[in] *config Northbridge configuration structure pointer. - * - */ -static u32 rd890_callout_entry(u32 func, uintptr_t data, void *config) -{ - u32 ret = 0; -#ifndef __PRE_RAM__ - device_t nb_dev = (device_t)data; -#endif - AMD_NB_CONFIG *nbConfigPtr = (AMD_NB_CONFIG*)config; - - switch (func) { - case PHCB_AmdPortTrainingCompleted: - break; - - case PHCB_AmdPortResetDeassert: -#ifndef __PRE_RAM__ - set_pcie_dereset(config); -#endif - break; - - case PHCB_AmdPortResetAssert: -#ifndef __PRE_RAM__ - set_pcie_reset(config); -#endif - break; - - case PHCB_AmdPortResetSupported: - break; - case PHCB_AmdGeneratePciReset: - break; - case PHCB_AmdGetExclusionTable: - break; - case PHCB_AmdAllocateBuffer: - break; - case PHCB_AmdUpdateApicInterruptMapping: - break; - case PHCB_AmdFreeBuffer: - break; - case PHCB_AmdLocateBuffer: - break; - case PHCB_AmdReportEvent: - break; - case PHCB_AmdPcieAsmpInfo: - break; - - case CB_AmdSetNbPorConfig: - break; - case CB_AmdSetHtConfig: - /*TODO: different HT path and deempasis for each NB */ - nbConfigPtr->pHtConfig->NbTransmitterDeemphasis = DEFAULT_HT_DEEMPASIES; - - break; - case CB_AmdSetPcieEarlyConfig: -#ifndef __PRE_RAM__ - nb_platform_config(nb_dev, nbConfigPtr); -#endif - break; - - case CB_AmdSetEarlyPostConfig: - break; - - case CB_AmdSetMidPostConfig: - nbConfigPtr->pNbConfig->IoApicBaseAddress = IO_APIC_ADDR; -#ifndef IOMMU_SUPPORT_DISABLE //TODO enable iommu - /* SBIOS must alloc 16K memory for IOMMU MMIO */ - UINT32 MmcfgBarAddress; //using default IOmmuBaseAddress - LibNbPciRead(nbConfigPtr->NbPciAddress.AddressValue | 0x1C, - AccessWidth32, - &MmcfgBarAddress, - nbConfigPtr); - MmcfgBarAddress &= ~0xf; - if (MmcfgBarAddress != 0) { - nbConfigPtr->IommuBaseAddress = MmcfgBarAddress; - } - nbConfigPtr->IommuBaseAddress = 0; //disable iommu -#endif - break; - - case CB_AmdSetLatePostConfig: - break; - - case CB_AmdSetRecoveryConfig: - break; - } - - return ret; -} - - -/** - * @brief North Bridge CIMx configuration - * - * should be called before exeucte CIMx function. - * this function will be called in romstage and ramstage. - */ -void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig) -{ - u16 i = 0; - PCI_ADDR PciAddress; - u32 val, sbNode, sbLink; - - if (!pConfig) { - return; - } - - memset(pConfig, 0, sizeof(AMD_NB_CONFIG_BLOCK)); - for (i = 0; i < MAX_NB_COUNT; i++) { - pConfig->Northbridges[i].pNbConfig = &nbConfig[i]; - pConfig->Northbridges[i].pHtConfig = &htConfig[i]; - pConfig->Northbridges[i].pPcieConfig = &pcieConfig[i]; - pConfig->Northbridges[i].ConfigPtr = &pConfig; - } - - /* Initialize all NB structures */ - AmdInitializer(pConfig); - - pConfig->NumberOfNorthbridges = MAX_NB_COUNT - 1; /* Support limited to primary NB only located at 0:0:0 */ - pConfig->StandardHeader.PcieBasePtr = (VOID *)PCIEX_BASE_ADDRESS; - pConfig->StandardHeader.CalloutPtr = &rd890_callout_entry; - - /* - * PCI Address to Access NB. Depends on HT topology and configuration for multi NB platform. - * Always 0:0:0 on single NB platform. - */ - pConfig->Northbridges[0].NbPciAddress.AddressValue = MAKE_SBDFO(0, 0x0, 0x0, 0x0, 0x0); - - /* Set HT path to NB by SbNode and SbLink */ - PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x60); - LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0])); - sbNode = (val >> 8) & 0x07; - PciAddress.AddressValue = MAKE_SBDFO(0, 0, CONFIG_CDB, FUNC_0, 0x64); - LibNbPciRead(PciAddress.AddressValue, AccessWidth32, &val, &(pConfig->Northbridges[0])); - sbLink = (val >> 8) & 0x07; //assum ganged - pConfig->Northbridges[0].NbHtPath.NodeID = sbNode; - pConfig->Northbridges[0].NbHtPath.LinkID = sbLink; - //TODO: other NBs - -#ifndef __PRE_RAM__ - /* If temporrary MMIO enable set up CPU MMIO */ - for (i = 0; i <= pConfig->NumberOfNorthbridges; i++) { - UINT32 MmioBase; - UINT32 LinkId; - UINT32 SubLinkId; - MmioBase = pConfig->Northbridges[i].pPcieConfig->TempMmioBaseAddress; - if (MmioBase != 0) { - LinkId = pConfig->Northbridges[i].NbHtPath.LinkID & 0xf; - SubLinkId = ((pConfig->Northbridges[i].NbHtPath.LinkID & 0xF0) == 0x20) ? 1 : 0; - /* Set Limit */ - LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x84), - AccessWidth32, - 0x0, - ((MmioBase << 12) + 0xF00) | (LinkId << 4) | (SubLinkId << 6), - &(pConfig->Northbridges[i])); - /* Set Base */ - LibNbPciRMW(MAKE_SBDFO (0, 0, 0x18, 0x1, (i * 4) + 0x80), - AccessWidth32, - 0x0, - (MmioBase << 12) | 0x3, - &(pConfig->Northbridges[i])); - } - } -#endif -} diff --git a/src/mainboard/tyan/s8226/rd890_cfg.h b/src/mainboard/tyan/s8226/rd890_cfg.h deleted file mode 100644 index 0227c3f54d..0000000000 --- a/src/mainboard/tyan/s8226/rd890_cfg.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _RD890_CFG_H_ -#define _RD890_CFG_H_ - -#include "NbPlatform.h" - -/* platform dependent configuration default value */ - -/** - * Path from CPU to NB - * [0..7] - Node (0..8) - * [8..11] - Link (0..3) - * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0. - */ -#ifndef DEFAULT_HT_PATH -#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15) -#define DEFAULT_HT_PATH {0x0, 0x1} -#else /* FAMILY10 */ -#define DEFAULT_HT_PATH {0x0, 0x3} -#endif -#endif - -/** - * Bitmap of enabled ports on NB #0/1/2/3 - * Bit[0] - Reserved - * Bit[1] - Reserved - * Bit[2] - Enable PCIe port 2 - * Bit[3] - Enable PCIe port 3 - * Bit[4] - Enable PCIe port 4 - * Bit[5] - Enable PCIe port 5 - * Bit[6] - Enable PCIe port 2 - * Bit[7] - Enable PCIe port 7 - * Bit[8] - Reserved - * Bit[9] - Enable PCIe port 9 - * Bit[10]- Enable PCIe port 10 - * Bit[11]- Enable PCIe port 11 - * Bit[12]- Enable PCIe port 12 - * Bit[13]- Enable PCIe port 13 - * Example: - * port_enable = 0x14 - * Port 2 and 4 enabled for training/initialization - */ -#ifndef DEFAULT_PORT_ENABLE_MAP -#define DEFAULT_PORT_ENABLE_MAP 0x0014 -#endif - -/** - * Bitmap of ports that have slot or onboard device connected. - * Example force PCIe Gen1 supporton port 2 and 4 (DEFAULT_PORT_ENABLE_MAP = BIT2 | BIT4) - * define DEFAULT_PORT_FORCE_GEN1 0x604 - */ -#ifndef DEFAULT_PORT_FORCE_GEN1 -#define DEFAULT_PORT_FORCE_GEN1 0x0 -#endif - -/** - * Bitmap of ports that have server hotplug support - */ -#ifndef DEFAULT_HOTPLUG_SUPPORT -#define DEFAULT_HOTPLUG_SUPPORT 0x0 -#endif - -#ifndef DEFAULT_HOTPLUG_DESCRIPTOR -#define DEFAULT_HOTPLUG_DESCRIPTOR {0, 0, 0, 0, 0, 0, 0, 0} -#endif - -#ifndef DEFAULT_TEMPMMIO_BASE_ADDRESS -#define DEFAULT_TEMPMMIO_BASE_ADDRESS 0xD0000000 -#endif - -/** - * Default GPP1 core configuraton on NB #0/1/2/3. - * 2 x8 slot, GFX_CONFIG_AABB - * 1 x16 slot, GFX_CONFIG_AAAA - */ -#ifndef DEFAULT_GPP1_CONFIG -#define DEFAULT_GPP1_CONFIG GFX_CONFIG_AABB -#endif - -/** - * Default GPP2 core configuraton on NB #0/1/2/3. - * 2 x8 slot, GFX_CONFIG_AABB - * 1 x16 slot, GFX_CONFIG_AAAA - */ -#ifndef DEFAULT_GPP2_CONFIG -#define DEFAULT_GPP2_CONFIG GFX_CONFIG_AABB -#endif - -/** - * Default GPP3a core configuraton on NB #0/1/2/3. - * 4:2:0:0:0:0 - GPP_CONFIG_GPP420000, 0x1 - * 4:1:1:0:0:0 - GPP_CONFIG_GPP411000, 0x2 - * 2:2:2:0:0:0 - GPP_CONFIG_GPP222000, 0x3 - * 2:2:1:1:0:0 - GPP_CONFIG_GPP221100, 0x4 - * 2:1:1:1:1:0 - GPP_CONFIG_GPP211110, 0x5 - * 1:1:1:1:1:1 - GPP_CONFIG_GPP111111, 0x6 - */ -#ifndef DEFAULT_GPP3A_CONFIG -#define DEFAULT_GPP3A_CONFIG GPP_CONFIG_GPP111111 -#endif - - -/** - * Default HT Transmitter de-emphasis setting - */ -#ifndef DEFAULT_HT_DEEMPASIES -#define DEFAULT_HT_DEEMPASIES 0x3 -#endif - -/** - * Default APIC nterrupt base for IOAPIC - */ -#ifndef DEFAULT_APIC_INTERRUPT_BASE -#define DEFAULT_APIC_INTERRUPT_BASE 24 -#endif - - -#define DEFAULT_PLATFORM_CONFIG(name) \ - NB_PLATFORM_CONFIG name = { \ - DEFAULT_PORT_ENABLE_MAP, \ - DEFAULT_PORT_FORCE_GEN1, \ - DEFAULT_HOTPLUG_SUPPORT, \ - DEFAULT_HOTPLUG_DESCRIPTOR, \ - DEFAULT_TEMPMMIO_BASE_ADDRESS, \ - DEFAULT_GPP1_CONFIG, \ - DEFAULT_GPP2_CONFIG, \ - DEFAULT_GPP3A_CONFIG, \ - DEFAULT_HT_DEEMPASIES, \ - /*DEFAULT_HT_PATH,*/ \ - DEFAULT_APIC_INTERRUPT_BASE, \ - } - -/** - * Platform configuration - */ -typedef struct { - UINT16 PortEnableMap; ///< Bitmap of enabled ports - UINT16 PortGen1Map; ///< Bitmap of ports to disable Gen2 - UINT16 PortHotplugMap; ///< Bitmap of ports support hotplug - UINT8 PortHotplugDescriptors[8];///< Ports Hotplug descriptors - UINT32 TemporaryMmio; ///< Temporary MMIO - UINT32 Gpp1Config; ///< Default PCIe GFX core configuration - UINT32 Gpp2Config; ///< Default PCIe GPP2 core configuration - UINT32 Gpp3aConfig; ///< Default PCIe GPP3a core configuration - UINT8 NbTransmitterDeemphasis; ///< HT transmitter de-emphasis level - // HT_PATH NbHtPath; ///< HT path to NB - UINT8 GlobalApicInterruptBase; ///< Global APIC interrupt base that is used in MADT table for IO APIC. -} NB_PLATFORM_CONFIG; - -/** - * Bridge CIMx configuration - */ -void rd890_cimx_config(AMD_NB_CONFIG_BLOCK *pConfig, NB_CONFIG *nbConfig, HT_CONFIG *htConfig, PCIE_CONFIG *pcieConfig); - -#endif //_RD890_CFG_H_ diff --git a/src/mainboard/tyan/s8226/romstage.c b/src/mainboard/tyan/s8226/romstage.c deleted file mode 100644 index d326a55020..0000000000 --- a/src/mainboard/tyan/s8226/romstage.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <lib.h> -#include <reset.h> -#include <stdint.h> -#include <arch/io.h> -#include <arch/cpu.h> -#include <console/console.h> -#include <arch/stages.h> -#include <cpu/x86/bist.h> -#include <cpu/x86/lapic.h> -#include <cpu/amd/car.h> -#include <northbridge/amd/agesa/agesawrapper.h> -#include <northbridge/amd/agesa/agesa_helper.h> -#include <northbridge/amd/agesa/family15/reset_test.h> -#include <nb_cimx.h> -#include <sb_cimx.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627dhg/w83627dhg.h> - - -#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 val; - - /* Must come first to enable PCI MMCONF. */ - amd_initmmio(); - - post_code(0x31); - - /* For serial port. */ - pci_devfn_t dev = PCI_DEV(0, 0x14, 3); - pci_write_config32(dev, 0x44, 0xff03ffd5); - - /* Halt if there was a built in self test failure */ - post_code(0x33); - report_bist_failure(bist); - - sb7xx_51xx_enable_wideio(0, 0x1600); /* though UARTs are on the NUVOTON BMC */ - winbond_set_clksel_48(DUMMY_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - sb7xx_51xx_disable_wideio(0); - post_code(0x34); - - post_code(0x35); - console_init(); - - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - post_code(0x37); - agesawrapper_amdinitreset(); - - if (!cpu_init_detectedx && boot_cpu()) { - post_code(0x38); - /* - * SR5650/5670/5690 RD890 chipset, read pci config space hang at POR, - * Disable all Pcie Bridges to work around It. - */ - sr56x0_rd890_disable_pcie_bridge(); - post_code(0x39); - nb_Poweron_Init(); - post_code(0x3A); - sb_Poweron_Init(); - } - post_code(0x3B); - agesawrapper_amdinitearly(); - - post_code(0x3C); - /* W83627DHG pin89,90 function select is RSTOUT3#, RSTOUT2# by default. - * In order to access W83795G/ADG HWM using I2C protocol, - * we select function to SDA, SCL function (or GP33, GP32 function). - */ - w83627dhg_enable_i2c(PNP_DEV(0x2E, W83627DHG_SPI)); - - nb_Ht_Init(); - post_code(0x3D); - /* Reset for HT, FIDVID, PLL and ucode patch(errata) changes to take affect. */ - if (!warm_reset_detect(0)) { - printk(BIOS_INFO, "...WARM RESET...\n\n\n"); - distinguish_cpu_resets(0); - soft_reset(); - die("After soft_reset - shouldn't see this message!!!\n"); - } - - post_code(0x40); - agesawrapper_amdinitpost(); - - post_code(0x41); - agesawrapper_amdinitenv(); - post_code(0x42); - - post_code(0x50); - printk(BIOS_DEBUG, "Disabling cache as RAM "); - disable_cache_as_ram(); - printk(BIOS_DEBUG, "done\n"); - - post_code(0x51); - copy_and_run(); - - /* We will not return, Should never see this message and post code. */ - printk(BIOS_DEBUG, "should not be here -\n"); - post_code(0x54); -} diff --git a/src/mainboard/tyan/s8226/sb700_cfg.c b/src/mainboard/tyan/s8226/sb700_cfg.c deleted file mode 100644 index d3a2651dc4..0000000000 --- a/src/mainboard/tyan/s8226/sb700_cfg.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#include <string.h> -#include <console/console.h> /* printk */ -#include "Platform.h" -#include "sb700_cfg.h" - - -/** - * @brief South Bridge CIMx configuration - * - * should be called before exeucte CIMx function. - * this function will be called in romstage and ramstage. - */ -void sb700_cimx_config(AMDSBCFG *sb_config) -{ - if (!sb_config) { - printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - No sb_config.\n"); - return; - } - printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - Start.\n"); - memset(sb_config, 0, sizeof(AMDSBCFG)); - - /* SB_POWERON_INIT */ - sb_config->StdHeader.Func = SB_POWERON_INIT; - - /* header */ - sb_config->StdHeader.pPcieBase = PCIEX_BASE_ADDRESS; - - /* static Build Parameters */ - sb_config->BuildParameters.BiosSize = BIOS_SIZE; - sb_config->BuildParameters.LegacyFree = LEGACY_FREE; - sb_config->BuildParameters.EcKbd = 0; - sb_config->BuildParameters.EcChannel0 = 0; - sb_config->BuildParameters.Smbus0BaseAddress = SMBUS0_BASE_ADDRESS; - sb_config->BuildParameters.Smbus1BaseAddress = SMBUS1_BASE_ADDRESS; - sb_config->BuildParameters.SioPmeBaseAddress = SIO_PME_BASE_ADDRESS; - sb_config->BuildParameters.WatchDogTimerBase = WATCHDOG_TIMER_BASE_ADDRESS; - sb_config->BuildParameters.SpiRomBaseAddress = SPI_BASE_ADDRESS; - - sb_config->BuildParameters.AcpiPm1EvtBlkAddr = PM1_EVT_BLK_ADDRESS; - sb_config->BuildParameters.AcpiPm1CntBlkAddr = PM1_CNT_BLK_ADDRESS; - sb_config->BuildParameters.AcpiPmTmrBlkAddr = PM1_TMR_BLK_ADDRESS; - sb_config->BuildParameters.CpuControlBlkAddr = CPU_CNT_BLK_ADDRESS; - sb_config->BuildParameters.AcpiGpe0BlkAddr = GPE0_BLK_ADDRESS; - sb_config->BuildParameters.SmiCmdPortAddr = SMI_CMD_PORT; - sb_config->BuildParameters.AcpiPmaCntBlkAddr = ACPI_PMA_CNT_BLK_ADDRESS; - - sb_config->BuildParameters.SataIDESsid = SATA_IDE_MODE_SSID; - sb_config->BuildParameters.SataRAIDSsid = SATA_RAID_MODE_SSID; - sb_config->BuildParameters.SataRAID5Ssid = SATA_RAID5_MODE_SSID; - sb_config->BuildParameters.SataAHCISsid = SATA_AHCI_SSID; - sb_config->BuildParameters.Ohci0Ssid = OHCI0_SSID; - sb_config->BuildParameters.Ohci1Ssid = OHCI1_SSID; - sb_config->BuildParameters.Ohci2Ssid = OHCI2_SSID; - sb_config->BuildParameters.Ohci3Ssid = OHCI3_SSID; - sb_config->BuildParameters.Ohci4Ssid = OHCI4_SSID; - sb_config->BuildParameters.Ehci0Ssid = EHCI0_SSID; - sb_config->BuildParameters.Ehci1Ssid = EHCI1_SSID; - sb_config->BuildParameters.SmbusSsid = SMBUS_SSID; - sb_config->BuildParameters.IdeSsid = IDE_SSID; - sb_config->BuildParameters.AzaliaSsid = AZALIA_SSID; - sb_config->BuildParameters.LpcSsid = LPC_SSID; - - sb_config->BuildParameters.HpetBase = HPET_BASE_ADDRESS; - - /* General */ - sb_config->Spi33Mhz = 1; - sb_config->SpreadSpectrum = 0; - sb_config->PciClk5 = 0; - sb_config->PciClks = 0x1F; - sb_config->ResetCpuOnSyncFlood = 1; // Do not reset CPU on sync flood - sb_config->TimerClockSource = 2; // Auto - sb_config->S3Resume = 0; - sb_config->RebootRequired = 0; - - /* HPET */ - sb_config->HpetTimer = HPET_TIMER; - - /* USB */ - sb_config->UsbIntClock = 0; // Use external clock - sb_config->Usb1Ohci0 = 1; //0:disable 1:enable Bus 0 Dev 18 Func0 - sb_config->Usb1Ohci1 = 1; //0:disable 1:enable Bus 0 Dev 18 Func1 - sb_config->Usb1Ehci = 1; //0:disable 1:enable Bus 0 Dev 18 Func2 - sb_config->Usb2Ohci0 = 1; //0:disable 1:enable Bus 0 Dev 19 Func0 - sb_config->Usb2Ohci1 = 1; //0:disable 1:enable Bus 0 Dev 19 Func1 - sb_config->Usb2Ehci = 1; //0:disable 1:enable Bus 0 Dev 19 Func2 - sb_config->Usb3Ohci = 1; //0:disable 1:enable Bus 0 Dev 20 Func5 - sb_config->UsbOhciLegacyEmulation = 1; //0:Enable 1:Disable - - sb_config->AcpiS1Supported = 1; - - /* SATA */ - sb_config->SataController = 1; - sb_config->SataClass = CONFIG_SATA_CONTROLLER_MODE; //0 native, 1 raid, 2 ahci - sb_config->SataSmbus = 0; - sb_config->SataAggrLinkPmCap = 1; - sb_config->SataPortMultCap = 1; - sb_config->SataClkAutoOff = 1; - sb_config->SataIdeCombMdPriSecOpt = 0; //0 -IDE as primary, 1 -IDE as secondary. - //TODO: set to secondary not take effect. - sb_config->SataIdeCombinedMode = 0; //1 IDE controlor exposed and combined mode enabled, 0 disabled - sb_config->SataEspPort = 0; - sb_config->SataClkAutoOffAhciMode = 1; - sb_config->SataHpcpButNonESP = 0; - sb_config->SataHideUnusedPort = 0; - - /* Azalia HDA */ - sb_config->AzaliaController = AZALIA_CONTROLLER; - sb_config->AzaliaPinCfg = AZALIA_PIN_CONFIG; - sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN; - sb_config->pAzaliaOemCodecTablePtr = NULL; - -#ifndef __PRE_RAM__ - /* ramstage cimx config here */ - if (!sb_config->StdHeader.pCallBack) { - sb_config->StdHeader.pCallBack = sb700_callout_entry; - } - - //sb_config-> -#endif //!__PRE_RAM__ - printk(BIOS_DEBUG, "SB700 - Cfg.c - sb700_cimx_config - End.\n"); -} diff --git a/src/mainboard/tyan/s8226/sb700_cfg.h b/src/mainboard/tyan/s8226/sb700_cfg.h deleted file mode 100644 index bed9161f29..0000000000 --- a/src/mainboard/tyan/s8226/sb700_cfg.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -#ifndef _SB700_CFG_H_ -#define _SB700_CFG_H_ - -#include <stdint.h> - - -/** - * @def BIOS_SIZE_1M - * @def BIOS_SIZE_2M - * @def BIOS_SIZE_4M - * @def BIOS_SIZE_8M - */ -#define BIOS_SIZE_1M 0 -#define BIOS_SIZE_2M 1 -#define BIOS_SIZE_4M 3 -#define BIOS_SIZE_8M 7 - -/* In SB700, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#if IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_1024) -#define BIOS_SIZE BIOS_SIZE_1M -#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_2048) -#define BIOS_SIZE BIOS_SIZE_2M -#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_4096) -#define BIOS_SIZE BIOS_SIZE_4M -#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_8192) -#define BIOS_SIZE BIOS_SIZE_8M -#endif -#endif - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @brief - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CINFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @brief bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @brief INCHIP Sata Controller - */ -#ifndef SATA_CONTROLLER -#define SATA_CONTROLLER 1 -#endif - -/** - * @def SATA_MODE - * @brief INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#ifndef SATA_MODE -#define SATA_MODE NATIVE_IDE_MODE -#endif - -/** - * @brief INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @brief INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#ifndef SATA_IDE_MODE -#define SATA_IDE_MODE IDE_LEGACY_MODE -#endif - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -#define SATA_CLOCK_SOURCE EXTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @brief INCHIP HDA controller - */ -#ifndef AZALIA_CONTROLLER -#define AZALIA_CONTROLLER AZALIA_AUTO -#endif - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#ifndef AZALIA_PIN_CONFIG -#define AZALIA_PIN_CONFIG 1 -#endif - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#ifndef AZALIA_SDIN_PIN -#define AZALIA_SDIN_PIN 0x02 -#endif - -/** - * @def GPP_CONTROLLER - */ -#ifndef GPP_CONTROLLER -#define GPP_CONTROLLER 1 -#endif - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#ifndef GPP_CFGMODE -#define GPP_CFGMODE GPP_CFGMODE_X1111 -#endif - - -/** - * @brief South Bridge CIMx configuration - * - */ -void sb700_cimx_config(AMDSBCFG *sb_cfg); - -/** - * @brief Entry point of Southbridge CIMx callout - * - * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig) - * - * @param[in] func Southbridge CIMx Function ID. - * @param[in] data Southbridge Input Data. - * @param[in] config Southbridge configuration structure pointer. - * - */ -u32 sb700_callout_entry(u32 func, u32 data, void* config); - -#endif //_SB700_CFG_H_ |