aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/tyan/s2882
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/tyan/s2882')
-rw-r--r--src/mainboard/tyan/s2882/devicetree.cb14
-rw-r--r--src/mainboard/tyan/s2882/irq_tables.c26
-rw-r--r--src/mainboard/tyan/s2882/mptable.c18
-rw-r--r--src/mainboard/tyan/s2882/romstage.c6
4 files changed, 32 insertions, 32 deletions
diff --git a/src/mainboard/tyan/s2882/devicetree.cb b/src/mainboard/tyan/s2882/devicetree.cb
index d563232b2d..b8cbce2858 100644
--- a/src/mainboard/tyan/s2882/devicetree.cb
+++ b/src/mainboard/tyan/s2882/devicetree.cb
@@ -7,7 +7,7 @@ chip northbridge/amd/amdk8/root_complex
device pci_domain 0 on
chip northbridge/amd/amdk8
- device pci 18.0 on # northbridge
+ device pci 18.0 on # northbridge
# devices on link 0, link 0 == LDT 0
chip southbridge/amd/amd8131
# the on/off keyword is mandatory
@@ -67,7 +67,7 @@ chip northbridge/amd/amdk8/root_complex
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
- end
+ end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
@@ -80,13 +80,13 @@ chip northbridge/amd/amdk8/root_complex
device pci 1.1 on end
device pci 1.2 on end
device pci 1.3 on end
- device pci 1.3 on
+ device pci 1.3 on
# chip drivers/generic/generic #dimm 0-0-0
# device i2c 50 on end
# end
# chip drivers/generic/generic #dimm 0-0-1
# device i2c 51 on end
-# end
+# end
# chip drivers/generic/generic #dimm 0-1-0
# device i2c 52 on end
# end
@@ -111,11 +111,11 @@ chip northbridge/amd/amdk8/root_complex
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
- end # device pci 18.0
-
+ end # device pci 18.0
+
device pci 18.0 on end
device pci 18.0 on end
-
+
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c
index 3107ac8a87..4ddd63eecb 100644
--- a/src/mainboard/tyan/s2882/irq_tables.c
+++ b/src/mainboard/tyan/s2882/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
@@ -63,7 +63,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link)
dst_node = (config_map >> 4) & 7;
dst_link = (config_map >> 8) & 3;
bus_base = (config_map >> 16) & 0xff;
-#if 0
+#if 0
printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
dst_node, dst_link, bus_base,
reg, config_map);
@@ -76,11 +76,11 @@ static unsigned node_link_to_bus(unsigned node, unsigned link)
return 0;
}
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
+ pirq_info->bus = bus;
pirq_info->devfn = devfn;
pirq_info->irq[0].link = link0;
pirq_info->irq[0].bitmap = bitmap0;
@@ -162,15 +162,15 @@ unsigned long write_pirq_routing_table(unsigned long addr)
pirq = (void *)(addr);
v = (uint8_t *)(addr);
-
+
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
+
pirq->rtr_bus = bus_chain_0;
pirq->rtr_devfn = (4<<3)|3;
pirq->exclusive_irqs = 0;
-
+
pirq->rtr_vendor = 0x1022;
pirq->rtr_device = 0x746b;
@@ -186,7 +186,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,3));
if (dev) {
/* initialize PCI interupts - these assignments depend
- on the PCB routing of PINTA-D
+ on the PCB routing of PINTA-D
PINTA = IRQ5
PINTB = IRQ9
@@ -202,7 +202,7 @@ unsigned long write_pirq_routing_table(unsigned long addr)
pci_assign_irqs(bus_chain_0, 4, slotIrqs_1_4);
write_pirq_info(pirq_info, bus_chain_0,(4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
pirq_info++; slot_num++;
-
+
printk(BIOS_DEBUG, "setting Onboard AMD USB \n");
static const unsigned char slotIrqs_8111_1_0[4] = { 0, 0, 0, 10 };
pci_assign_irqs(bus_8111_1, 0, slotIrqs_8111_1_0);
@@ -279,16 +279,16 @@ unsigned long write_pirq_routing_table(unsigned long addr)
pirq_info++; slot_num++;
#endif
-#if 0
+#if 0
//?? what's this?
write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0);
pirq_info++; slot_num++;
#endif
-
- pirq->size = 32 + 16 * slot_num;
+
+ pirq->size = 32 + 16 * slot_num;
for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ sum += v[i];
sum = pirq->checksum - sum;
diff --git a/src/mainboard/tyan/s2882/mptable.c b/src/mainboard/tyan/s2882/mptable.c
index f1d7a27179..43ccef6276 100644
--- a/src/mainboard/tyan/s2882/mptable.c
+++ b/src/mainboard/tyan/s2882/mptable.c
@@ -30,7 +30,7 @@ static unsigned node_link_to_bus(unsigned node, unsigned link)
dst_node = (config_map >> 4) & 7;
dst_link = (config_map >> 8) & 3;
bus_base = (config_map >> 16) & 0xff;
-#if 0
+#if 0
printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
dst_node, dst_link, bus_base,
reg, config_map);
@@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v)
unsigned apicid_8111;
unsigned apicid_8131_1;
unsigned apicid_8131_2;
-
+
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
memset(mc, 0, sizeof(*mc));
@@ -95,8 +95,8 @@ static void *smp_write_config_table(void *v)
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_isa++;
- }
- else {
+ }
+ else {
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
bus_8111_1 = 4;
@@ -137,9 +137,9 @@ static void *smp_write_config_table(void *v)
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(3);
#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
- apicid_8111 = apicid_base+0;
+ apicid_8111 = apicid_base+0;
apicid_8131_1 = apicid_base+1;
apicid_8131_2 = apicid_base+2;
@@ -163,7 +163,7 @@ static void *smp_write_config_table(void *v)
}
}
-
+
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1);
@@ -180,7 +180,7 @@ static void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|3, apicid_8111, 0x13);
-
+
//On Board AMD USB
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
@@ -209,7 +209,7 @@ static void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);//
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);//
-//Slot 4 PCIX 100/66
+//Slot 4 PCIX 100/66
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);//
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);//
diff --git a/src/mainboard/tyan/s2882/romstage.c b/src/mainboard/tyan/s2882/romstage.c
index c49dff9f10..d8816d4cff 100644
--- a/src/mainboard/tyan/s2882/romstage.c
+++ b/src/mainboard/tyan/s2882/romstage.c
@@ -1,4 +1,4 @@
-
+
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
@@ -129,7 +129,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
init_cpus(cpu_init_detectedx);
}
-
+
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
@@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_default_resource_map();
needs_reset = setup_coherent_ht_domain();
-
+
#if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched
start_other_cores();
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-01 13:31:15 +0000