aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/tyan/s2881
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/tyan/s2881')
-rw-r--r--src/mainboard/tyan/s2881/devicetree.cb16
-rw-r--r--src/mainboard/tyan/s2881/get_bus_conf.c10
-rw-r--r--src/mainboard/tyan/s2881/irq_tables.c20
-rw-r--r--src/mainboard/tyan/s2881/mainboard.c2
-rw-r--r--src/mainboard/tyan/s2881/mptable.c10
-rw-r--r--src/mainboard/tyan/s2881/resourcemap.c6
-rw-r--r--src/mainboard/tyan/s2881/romstage.c4
7 files changed, 34 insertions, 34 deletions
diff --git a/src/mainboard/tyan/s2881/devicetree.cb b/src/mainboard/tyan/s2881/devicetree.cb
index 3c1f5bc276..47b5d37775 100644
--- a/src/mainboard/tyan/s2881/devicetree.cb
+++ b/src/mainboard/tyan/s2881/devicetree.cb
@@ -8,11 +8,11 @@ chip northbridge/amd/amdk8/root_complex
chip northbridge/amd/amdk8
device pci 18.0 on end # LDT0
device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
+ device pci 18.0 on # northbridge
# devices on link 2, link 2 == LDT 2
chip southbridge/amd/amd8131
# the on/off keyword is mandatory
- device pci 0.0 on
+ device pci 0.0 on
device pci 9.0 on end # Broadcom 5704
device pci 9.1 on end
device pci a.0 on end # Adaptic
@@ -65,7 +65,7 @@ chip northbridge/amd/amdk8/root_complex
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
- end
+ end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
@@ -77,13 +77,13 @@ chip northbridge/amd/amdk8/root_complex
end
device pci 1.1 on end
device pci 1.2 on end
- device pci 1.3 on
+ device pci 1.3 on
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
- end
+ end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
@@ -120,12 +120,12 @@ chip northbridge/amd/amdk8/root_complex
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
- end # device pci 18.0
-
+ end # device pci 18.0
+
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end
- end
+ end
end
diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c
index 758e3d809d..562ba935d8 100644
--- a/src/mainboard/tyan/s2881/get_bus_conf.c
+++ b/src/mainboard/tyan/s2881/get_bus_conf.c
@@ -23,7 +23,7 @@ unsigned apicid_8111 ;
unsigned apicid_8131_1;
unsigned apicid_8131_2;
-unsigned pci1234x[] =
+unsigned pci1234x[] =
{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
0x0000ff0,
@@ -35,7 +35,7 @@ unsigned pci1234x[] =
// 0x0000ff0,
// 0x0000ff0
};
-unsigned hcdnx[] =
+unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
0x20202020,
// 0x20202020,
@@ -71,7 +71,7 @@ void get_bus_conf(void)
}
get_sblk_pci1234();
-
+
sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
sbdn3 = sysconf.hcdn[0] & 0xff;
@@ -119,8 +119,8 @@ void get_bus_conf(void)
/*I/O APICs: APIC ID Version State Address*/
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(3);
-#else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#else
+ apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
apicid_8111 = apicid_base+0;
apicid_8131_1 = apicid_base+1;
diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c
index af66ba9730..b53a9923a7 100644
--- a/src/mainboard/tyan/s2881/irq_tables.c
+++ b/src/mainboard/tyan/s2881/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify!
+/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
@@ -12,11 +12,11 @@
#include <cpu/amd/amdk8_sysconf.h>
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
+static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
uint8_t slot, uint8_t rfu)
{
- pirq_info->bus = bus;
+ pirq_info->bus = bus;
pirq_info->devfn = devfn;
pirq_info->irq[0].link = link0;
pirq_info->irq[0].bitmap = bitmap0;
@@ -62,22 +62,22 @@ unsigned long write_pirq_routing_table(unsigned long addr)
pirq = (void *)(addr);
v = (uint8_t *)(addr);
-
+
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
-
+
pirq->rtr_bus = bus_8111_0;
pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
pirq->exclusive_irqs = 0;
-
+
pirq->rtr_vendor = 0x1022;
pirq->rtr_device = 0x746b;
pirq->miniport_data = 0;
memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
+
pirq_info = (void *) ( &pirq->checksum + 1);
slot_num = 0;
//pci bridge
@@ -88,11 +88,11 @@ unsigned long write_pirq_routing_table(unsigned long addr)
// pirq_info++; slot_num++;
pirq_info++; slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
+
+ pirq->size = 32 + 16 * slot_num;
for (i = 0; i < pirq->size; i++)
- sum += v[i];
+ sum += v[i];
sum = pirq->checksum - sum;
diff --git a/src/mainboard/tyan/s2881/mainboard.c b/src/mainboard/tyan/s2881/mainboard.c
index 5866577ce4..773f2540a4 100644
--- a/src/mainboard/tyan/s2881/mainboard.c
+++ b/src/mainboard/tyan/s2881/mainboard.c
@@ -59,7 +59,7 @@ static void adt7463_init(device_t dev)
result = smbus_write_byte(adt7463, 0x5e, 0xc2);
/* Make sure that our fans never stop when temp. falls below Tmin,
- * but rather keep going at minimum duty cycle (applies to automatic
+ * but rather keep going at minimum duty cycle (applies to automatic
* fan control mode only).
*/
result = smbus_write_byte(adt7463, 0x62, 0xc0);
diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c
index ca75c51a93..a51384c641 100644
--- a/src/mainboard/tyan/s2881/mptable.c
+++ b/src/mainboard/tyan/s2881/mptable.c
@@ -30,7 +30,7 @@ static void *smp_write_config_table(void *v)
unsigned char bus_num;
int i;
-
+
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
memset(mc, 0, sizeof(*mc));
@@ -51,7 +51,7 @@ static void *smp_write_config_table(void *v)
smp_write_processors(mc);
get_bus_conf();
-
+
/*Bus: Bus ID Type*/
/* define bus and isa numbers */
@@ -60,7 +60,7 @@ static void *smp_write_config_table(void *v)
}
smp_write_bus(mc, bus_isa, "ISA ");
-
+
/*I/O APICs: APIC ID Version State Address*/
smp_write_ioapic(mc, apicid_8111, 0x11, 0xfec00000);
{
@@ -82,7 +82,7 @@ static void *smp_write_config_table(void *v)
}
}
-
+
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_8111, 0x0);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_8111, 0x1);
@@ -96,7 +96,7 @@ static void *smp_write_config_table(void *v)
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_8111, 0xd);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe);
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf);
-
+
//8111 LPC ????
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|0, apicid_8111, 0x13);
diff --git a/src/mainboard/tyan/s2881/resourcemap.c b/src/mainboard/tyan/s2881/resourcemap.c
index cecb790795..23ab936a5b 100644
--- a/src/mainboard/tyan/s2881/resourcemap.c
+++ b/src/mainboard/tyan/s2881/resourcemap.c
@@ -144,7 +144,7 @@ static void setup_s2881_resource_map(void)
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
+ * This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
@@ -200,7 +200,7 @@ static void setup_s2881_resource_map(void)
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
+ * 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
@@ -208,7 +208,7 @@ static void setup_s2881_resource_map(void)
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
+ * This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
diff --git a/src/mainboard/tyan/s2881/romstage.c b/src/mainboard/tyan/s2881/romstage.c
index 1310c8e99b..0a63486ffb 100644
--- a/src/mainboard/tyan/s2881/romstage.c
+++ b/src/mainboard/tyan/s2881/romstage.c
@@ -3,7 +3,7 @@
#if CONFIG_LOGICAL_CPUS==1
#define SET_NB_CFG_54 1
#endif
-
+
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
@@ -117,7 +117,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
// post_code(0x32);
-
+
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-02 01:52:58 +0000