1 files changed, 80 insertions, 0 deletions
diff --git a/src/mainboard/totalimpact/briq/Options.lb b/src/mainboard/totalimpact/briq/Options.lb
index 37bfa24c72..557290f8ff 100644
--- a/src/mainboard/totalimpact/briq/Options.lb
+++ b/src/mainboard/totalimpact/briq/Options.lb
@@ -11,6 +11,32 @@ uses ISA_MEM_BASE
 uses PCIC0_CFGADDR
 uses PCIC0_CFGDATA
 uses _IO_BASE
+uses CROSS_COMPILE 
+uses HAVE_OPTION_TABLE
+uses CONFIG_COMPRESS 
+uses DEFAULT_CONSOLE_LOGLEVEL 
+uses CONFIG_USE_INIT
+uses NO_POST
+uses CONFIG_CONSOLE_SERIAL8250 
+uses CONFIG_IDE_STREAM 
+uses IDE_BOOT_DRIVE
+uses IDE_SWAB IDE_OFFSET 
+uses ROM_SIZE
+uses _RESET
+uses _EXCEPTION_VECTORS
+uses _ROMBASE
+uses _ROMSTART
+uses _RAMBASE
+uses _RAMSTART
+uses STACK_SIZE
+uses HEAP_SIZE
+uses CONFIG_BRIQ_750FX 
+uses CONFIG_BRIQ_7400
+
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses LINUXBIOS_EXTRA_VERSION
 uses CROSS_COMPILE
 uses CC
 uses HOSTCC
@@ -33,3 +59,57 @@ default TTYS0_DIV=4
 ## Set UART base address
 ##
 default TTYS0_BASE=0x3f8
+
+## use a cross compiler
+#default CROSS_COMPILE="powerpc-eabi-"
+#default CROSS_COMPILE="ppc_74xx-"
+
+## Use stage 1 initialization code
+default CONFIG_USE_INIT=1
+
+## We don't use compressed image
+default CONFIG_COMPRESS=0
+
+## Turn off POST codes
+default NO_POST=1
+
+## Enable serial console
+default DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Boot linux from IDE
+default CONFIG_IDE_STREAM=1
+default IDE_BOOT_DRIVE=0
+default IDE_SWAB=1
+default IDE_OFFSET=0
+
+# ROM is 1Mb
+default ROM_SIZE=1048576
+
+# Set stack and heap sizes (stage 2)
+default STACK_SIZE=0x10000
+default HEAP_SIZE=0x10000
+
+# Sandpoint Demo Board
+## Base of ROM
+default _ROMBASE=0xfff00000
+
+## Sandpoint reset vector
+default _RESET=_ROMBASE+0x100
+
+## Exception vectors (other than reset vector)
+default _EXCEPTION_VECTORS=_RESET+0x100
+
+## Start of linuxBIOS in the boot rom
+## = _RESET + exeception vector table size
+default _ROMSTART=_RESET+0x3100
+
+## LinuxBIOS C code runs at this location in RAM
+default _RAMBASE=0x00100000
+default _RAMSTART=0x00100000
+
+default CONFIG_BRIQ_750FX=1
+#default CONFIG_BRIQ_7400=1
+
+### End Options.lb
+end