6 files changed, 35 insertions, 35 deletions
diff --git a/src/mainboard/technologic/Kconfig b/src/mainboard/technologic/Kconfig
index 32967fd3e5..5756361863 100644
--- a/src/mainboard/technologic/Kconfig
+++ b/src/mainboard/technologic/Kconfig
@@ -1,7 +1,7 @@
 choice
 	prompt "Mainboard model"
 	depends on VENDOR_TECHNOLOGIC
-        
+
 source "src/mainboard/technologic/ts5300/Kconfig"
 
 endchoice
diff --git a/src/mainboard/technologic/ts5300/chip.h b/src/mainboard/technologic/ts5300/chip.h
index 97f92dd915..ceb8af100a 100644
--- a/src/mainboard/technologic/ts5300/chip.h
+++ b/src/mainboard/technologic/ts5300/chip.h
@@ -1,5 +1,5 @@
 extern struct chip_operations mainboard_ops;
 
 struct mainboard_config {
-	
+
 };
diff --git a/src/mainboard/technologic/ts5300/devicetree.cb b/src/mainboard/technologic/ts5300/devicetree.cb
index 65809cb2f4..a0f05791af 100644
--- a/src/mainboard/technologic/ts5300/devicetree.cb
+++ b/src/mainboard/technologic/ts5300/devicetree.cb
@@ -1,7 +1,7 @@
 chip cpu/amd/sc520
-	device pci_domain 0 on 
+	device pci_domain 0 on
 		device pci 0.0 on end
-	
+
 #		register "com1" = "{1}"
 #		register "com1" = "{1, 0, 0x3f8, 4}"
 	end
diff --git a/src/mainboard/technologic/ts5300/irq_tables.c b/src/mainboard/technologic/ts5300/irq_tables.c
index 9b49747ead..22d5820a62 100644
--- a/src/mainboard/technologic/ts5300/irq_tables.c
+++ b/src/mainboard/technologic/ts5300/irq_tables.c
@@ -1,4 +1,4 @@
-/* This file was generated by getpir.c, do not modify! 
+/* This file was generated by getpir.c, do not modify!
    (but if you do, please run checkpir on it to verify)
  * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
  *
diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c
index 4b9ce16bf8..58333b8f88 100644
--- a/src/mainboard/technologic/ts5300/mainboard.c
+++ b/src/mainboard/technologic/ts5300/mainboard.c
@@ -17,10 +17,10 @@ static void irqdump(void)
   int i;
   int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
 	        0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
-		0xd20, 0xd21, 0xd22, 0xd28, 0xd29, 
+		0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
 		0xd30, 0xd31, 0xd32, 0xd33,
-		0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, 
-		0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, 
+		0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
+		0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
 		-1};
   mmcr = (void *) 0xfffef000;
 
@@ -44,7 +44,7 @@ static void enable_dev(struct device *dev) {
 
 	/* from fuctory bios */
 	/* NOTE: the following interrupt settings made interrupts work
-	 * for hard drive, and serial, but not for ethernet 
+	 * for hard drive, and serial, but not for ethernet
 	 */
 
 	printk(BIOS_ERR, "Setting up PIC\n");
@@ -63,7 +63,7 @@ static void enable_dev(struct device *dev) {
 	mmcr->pic.rtcmap  = 0x03;
 	mmcr->pic.ferrmap = 0x00;
 	mmcr->pic.intpinpol = 0x100;
-	
+
 	mmcr->pic.gp0imap = 0x00;
 	mmcr->pic.gp1imap = 0x02;
 	mmcr->pic.gp2imap = 0x07;
@@ -83,7 +83,7 @@ static void enable_dev(struct device *dev) {
 	mmcr->sysarb.ctl = 0x00;
 	mmcr->sysarb.menb = 0x1f;
 	mmcr->sysarb.prictl = 0x40000f0f;
-	
+
 	/* this is bios setting, depends on sysarb above */
 	mmcr->hostbridge.ctl = 0x0;
 	mmcr->hostbridge.tgtirqctl = 0x0;
@@ -125,7 +125,7 @@ static void enable_dev(struct device *dev) {
 	mmcr->gpctl.gprdoff = 0x02;
 	mmcr->gpctl.gpwrw = 0x07;
 	mmcr->gpctl.gpwroff = 0x02;
-	
+
 	//mmcr->reset.sysinfo = 0xdf;
 	//mmcr->reset.rescfg = 0x5;
 	/* their IRQ table is wrong. Just hardwire it */
diff --git a/src/mainboard/technologic/ts5300/romstage.c b/src/mainboard/technologic/ts5300/romstage.c
index 4379c2457d..d0f0d4c61c 100644
--- a/src/mainboard/technologic/ts5300/romstage.c
+++ b/src/mainboard/technologic/ts5300/romstage.c
@@ -52,7 +52,7 @@ void setup_pars(void)
 static void identify_ts9500(void)
 {
 	unsigned i, val;
-	
+
 	TS9500_LED_ON;
 
 	print_err("TS-9500 add-on found:\n");
@@ -61,23 +61,23 @@ static void identify_ts9500(void)
 		print_err("  DIP");
 		print_err_char(i+0x31);
 		print_err(": ");
-		if((val&(1<<i))!=0) 
-			print_err("on\n"); 
+		if((val&(1<<i))!=0)
+			print_err("on\n");
 		else
-			print_err("off\n"); 
+			print_err("off\n");
 	}
 	print_err("\n");
-	
+
 	val=inb(0x19a);
-	
+
 	for (i=6; i<8; i++) {
 		print_err("  JP");
 		print_err_char(i+0x30-5);
 		print_err(": ");
-		if((val&(1<<i))!=0) 
-			print_err("on\n"); 
+		if((val&(1<<i))!=0)
+			print_err("on\n");
 		else
-			print_err("off\n"); 
+			print_err("off\n");
 	}
 	print_err("\n");
 
@@ -103,33 +103,33 @@ static void identify_system(void)
 	print_err("  SRAM option:   ");
 	if((val&1)==0) print_err("not ");
 	print_err("installed\n");
-	
+
 	print_err("  RS-485 option: ");
 	if((val&2)==0) print_err("not ");
 	print_err("installed\n");
 
 	val=inb(0x76);
 	print_err("  Temp. range:   ");
-	if((val&2)==0) print_err("commercial\n"); 
+	if((val&2)==0) print_err("commercial\n");
 	else print_err("industrial\n");
-	
+
 	print_err("\n");
-	
+
 	val=inb(0x77);
 	for (i=1; i<8; i++) {
 		print_err("  JP");
 		print_err_char(i+0x30);
 		print_err(": ");
-		if((val&(1<<i))!=0) 
-			print_err("on\n"); 
+		if((val&(1<<i))!=0)
+			print_err("on\n");
 		else
-			print_err("off\n"); 
+			print_err("off\n");
 	}
 	print_err("\n");
 
 	/* Detect TS-9500 */
 	val=inb(0x19d);
-	if(val==0x5f) 
+	if(val==0x5f)
 		identify_ts9500();
 
 }
@@ -144,18 +144,18 @@ static void main(unsigned long bist)
 {
 	volatile int i;
 	unsigned val;
-	
+
 	TS5300_LED_ON;
-	
+
 	// Let the hardware settle a bit.
 	for(i = 0; i < 100; i++)
 		;
-	
+
         setupsc520();
         uart_init();
         console_init();
-	
-	
+
+
 	print_err("Technologic Systems TS5300 - http://www.embeddedx86.com/\n");
 	staticmem();
 	print_err("Memory initialized: 32MB\n");
@@ -170,7 +170,7 @@ static void main(unsigned long bist)
 	ram_check(0x00000000, 0x000a0000);
 	ram_check(0x000b0000, 0x02000000);
 #endif
-	
+
 	TS5300_LED_OFF;
 }