diff options
Diffstat (limited to 'src/mainboard/technexion/tim8690')
21 files changed, 5487 insertions, 0 deletions
diff --git a/src/mainboard/technexion/tim8690/Config.lb b/src/mainboard/technexion/tim8690/Config.lb new file mode 100644 index 0000000000..9e3ebe7fd4 --- /dev/null +++ b/src/mainboard/technexion/tim8690/Config.lb @@ -0,0 +1,312 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + + +## +## Compute the location and size of where this firmware image +## (coreboot plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The coreboot bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + +## +## Compute where this copy of coreboot will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up coreboot, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 +default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o + +#dir /drivers/si/3114 + +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE + object get_bus_conf.o + object irq_tables.o +end + +if HAVE_ACPI_TABLES + object acpi_tables.o + object fadt.o + makerule dsdt.c + depends "$(MAINBOARD)/acpi/*.asl" + action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/acpi/dsdt.asl" + action "mv dsdt.hex dsdt.c" + end + object ./dsdt.o +end + +#object reset.o + +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + + makerule ./cache_as_ram_auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + + else + + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall $(DEBUG_CFLAGS) -c -S -o $@" + action "perl -e 's/\.rodata/.rom.data/g' -pi $@" + action "perl -e 's/\.text/.section .rom.text/g' -pi $@" + end + + end + +end +## +## Build our 16 bit and 32 bit coreboot entry code +## +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + +## +## Build our reset vector (This is where coreboot is entered) +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +### +### This is the early phase of coreboot startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc + end +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject cache_as_ram_auto.o + else + mainboardinit ./cache_as_ram_auto.inc + end + +end + +## +## Include the secondary Configuration files +## +config chip.h + +#The variables belong to mainboard are defined here. + +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define vga_rom_address = 0xfff80000 +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_S1G1 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs690 + device pci 0.0 on end # HT 0x7910 + device pci 1.0 on # Internal Graphics P2P bridge 0x7912 + chip drivers/pci/onboard + device pci 5.0 on end # Internal Graphics 0x791F + register "rom_address" = "0xfff80000" + end + end + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 + device pci 3.0 off end # PCIE P2P bridge 0x791b + device pci 4.0 on end # PCIE P2P bridge 0x7914 + device pci 5.0 on end # PCIE P2P bridge 0x7915 + device pci 6.0 on end # PCIE P2P bridge 0x7916 + device pci 7.0 on end # PCIE P2P bridge 0x7917 + device pci 8.0 off end # NB/SB Link P2P bridge + register "vga_rom_address" = "0xfff80000" + register "gpp_configuration" = "4" + register "port_enable" = "0xfc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "0" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus + device pci 12.0 on end # SATA 0x4380 + device pci 13.0 on end # USB 0x4387 + device pci 13.1 on end # USB 0x4388 + device pci 13.2 on end # USB 0x4389 + device pci 13.3 on end # USB 0x438a + device pci 13.4 on end # USB 0x438b + device pci 13.5 on end # USB 2 0x4386 + device pci 14.0 on # SM 0x4385 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x438c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x438d + chip superio/ite/it8712f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8712f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # ACI 0x4382 + device pci 14.6 on end # MCI 0x438e + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb600 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #pci_domain +end #northbridge/amd/amdk8/root_complex + diff --git a/src/mainboard/technexion/tim8690/Options.lb b/src/mainboard/technexion/tim8690/Options.lb new file mode 100644 index 0000000000..926a992912 --- /dev/null +++ b/src/mainboard/technexion/tim8690/Options.lb @@ -0,0 +1,304 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +uses HAVE_MP_TABLE +uses CONFIG_ROMFS +uses HAVE_PIRQ_TABLE +uses HAVE_ACPI_TABLES +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses COREBOOT_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses HW_MEM_HOLE_SIZEK +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT + +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_USE_PRINTK_IN_CAR + +uses CONFIG_VIDEO_MB +uses CONFIG_GFXUMA +uses HAVE_MAINBOARD_RESOURCES + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +#default FALLBACK_SIZE=131072 +#256K +default FALLBACK_SIZE=0x40000 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from coreboot +## +default HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=11 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## ACPI tables will be included +default HAVE_ACPI_TABLES=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=0 + +## +## Move the default coreboot cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=2 + +default CONFIG_MAX_PHYSICAL_CPUS=1 +default CONFIG_LOGICAL_CPUS=1 + + +#1G memory hole +default HW_MEM_HOLE_SIZEK=0x100000 + +#VGA Console +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + +# BTDC: Only one HT device on Herring. +#HT Unit ID offset +#default HT_CHAIN_UNITID_BASE=0x6 +default HT_CHAIN_UNITID_BASE=0x0 + + +#real SB Unit ID +default HT_CHAIN_END_UNITID_BASE=0x1 + +#make the SB HT chain on bus 0 +default SB_HT_CHAIN_ON_BUS0=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xc8000 +default DCACHE_RAM_SIZE=0x8000 +default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000 +default CONFIG_USE_INIT=0 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="tim8690" +default MAINBOARD_VENDOR="technexion" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050 + + +### +### coreboot layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = 0 + +## +## coreboot C code runs at this location in RAM +## +default _RAMBASE=0x00004000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_PAYLOAD = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + + +default CONFIG_USE_PRINTK_IN_CAR=1 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the coreboot loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +default CONFIG_VIDEO_MB=1 +default CONFIG_GFXUMA=1 +default HAVE_MAINBOARD_RESOURCES=1 + +### End Options.lb +end diff --git a/src/mainboard/technexion/tim8690/acpi/debug.asl b/src/mainboard/technexion/tim8690/acpi/debug.asl new file mode 100644 index 0000000000..5a5b1d6798 --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/debug.asl @@ -0,0 +1,198 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + DefinitionBlock ( + "DSDT.AML", + "DSDT", + 0x01, + "XXXXXX", + "XXXXXXXX", + 0x00010001 + ) + { + Include ("debug.asl") + } +*/ + +/* +* 0x80: POST_BASE +* 0x3F8: DEBCOM_BASE +* X80: POST_REGION +* P80: PORT80 +* +* CREG: DEBCOM_REGION +* CUAR: DEBCOM_UART +* CDAT: DEBCOM_DATA +* CDLM: DEBCOM_DLM +* DLCR: DEBCOM_LCR +* CMCR: DEBCOM_MCR +* CLSR: DEBCOM_LSR +* +* DEBUG_INIT DINI +*/ + +OperationRegion(X80, SystemIO, 0x80, 1) + Field(X80, ByteAcc, NoLock, Preserve) +{ + P80, 8 +} + +OperationRegion(CREG, SystemIO, 0x3F8, 8) + Field(CREG, ByteAcc, NoLock, Preserve) +{ + CDAT, 8, + CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8 +} + +/* +* DINI +* Initialize the COM port to 115,200 8-N-1 +*/ +Method(DINI) +{ + store(0x83, DLCR) + store(0x01, CDAT) /* 115200 baud (low) */ + store(0x00, CDLM) /* 115200 baud (high) */ + store(0x03, DLCR) /* word=8 stop=1 parity=none */ + store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */ + store(0x00, CDLM) /* turn off interrupts */ +} + +/* +* THRE +* Wait for COM port transmitter holding register to go empty +*/ +Method(THRE) +{ + and(CLSR, 0x20, local0) + while (Lequal(local0, Zero)) { + and(CLSR, 0x20, local0) + } +} + +/* +* OUTX +* Send a single raw character +*/ +Method(OUTX, 1) +{ + THRE() + store(Arg0, CDAT) +} + +/* +* OUTC +* Send a single character, expanding LF into CR/LF +*/ +Method(OUTC, 1) +{ + if (LEqual(Arg0, 0x0a)) { + OUTX(0x0d) + } + OUTX(Arg0) +} + +/* +* DBGN +* Send a single hex nibble +*/ +Method(DBGN, 1) +{ + and(Arg0, 0x0f, Local0) + if (LLess(Local0, 10)) { + add(Local0, 0x30, Local0) + } else { + add(Local0, 0x37, Local0) + } + OUTC(Local0) +} + +/* +* DBGB +* Send a hex byte +*/ +Method(DBGB, 1) +{ + ShiftRight(Arg0, 4, Local0) + DBGN(Local0) + DBGN(Arg0) +} + +/* +* DBGW +* Send a hex word +*/ +Method(DBGW, 1) +{ + ShiftRight(Arg0, 8, Local0) + DBGB(Local0) + DBGB(Arg0) +} + +/* +* DBGD +* Send a hex Dword +*/ +Method(DBGD, 1) +{ + ShiftRight(Arg0, 16, Local0) + DBGW(Local0) + DBGW(Arg0) +} + +/* +* DBGO +* Send either a string or an integer +*/ +Method(DBGO, 1) +{ + /* DINI() */ + if (LEqual(ObjectType(Arg0), 1)) { + if (LGreater(Arg0, 0xffff)) { + DBGD(Arg0) + } else { + if (LGreater(Arg0, 0xff)) { + DBGW(Arg0) + } else { + DBGB(Arg0) + } + } + } else { + Name(BDBG, Buffer(80) {}) + store(Arg0, BDBG) + store(0, Local1) + while (One) { + store(GETC(BDBG, Local1), Local0) + if (LEqual(Local0, 0)) { + return (0) + } + OUTC(Local0) + Increment(Local1) + } + } + return (0) +} + +/* Get a char from a string */ +Method(GETC, 2) +{ + CreateByteField(Arg0, Arg1, DBGC) + return (DBGC) +} diff --git a/src/mainboard/technexion/tim8690/acpi/doit.sh b/src/mainboard/technexion/tim8690/acpi/doit.sh new file mode 100644 index 0000000000..352ca97f46 --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/doit.sh @@ -0,0 +1,3 @@ +#!/bin/bash +#cpp -P dsdt.asl > dsdt.i +iasl dsdt.asl diff --git a/src/mainboard/technexion/tim8690/acpi/dsdt.asl b/src/mainboard/technexion/tim8690/acpi/dsdt.asl new file mode 100644 index 0000000000..001354861c --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/dsdt.asl @@ -0,0 +1,1791 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* DefinitionBlock Statement */ +DefinitionBlock ( + "DSDT.AML", /* Output filename */ + "DSDT", /* Signature */ + 0x02, /* DSDT Revision, needs to be 2 for 64bit */ + "TECHNEXION", /* OEMID */ + "TIM-8690", /* TABLE ID */ + 0x00010001 /* OEM Revision */ + ) +{ /* Start of ASL file */ + /* Include ("debug.asl") */ /* Include global debug methods if needed */ + + /* Data to be patched by the BIOS during POST */ + /* FIXME the patching is not done yet! */ + /* Memory related values */ + Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ + Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ + Name(PBLN, 0x0) /* Length of BIOS area */ + + Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ + Name(HPBA, 0xFED00000) /* Base address of HPET table */ + + Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ + + /* USB overcurrent mapping pins. */ + Name(UOM0, 0) + Name(UOM1, 2) + Name(UOM2, 0) + Name(UOM3, 7) + Name(UOM4, 2) + Name(UOM5, 2) + Name(UOM6, 6) + Name(UOM7, 2) + Name(UOM8, 6) + Name(UOM9, 6) + + /* Some global data */ + Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ + Name(OSV, Ones) /* Assume nothing */ + Name(PMOD, One) /* Assume APIC */ + + /* PIC IRQ mapping registers, C00h-C01h */ + OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) + Field(PRQM, ByteAcc, NoLock, Preserve) { + PRQI, 0x00000008, + PRQD, 0x00000008, /* Offset: 1h */ + } + IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { + PINA, 0x00000008, /* Index 0 */ + PINB, 0x00000008, /* Index 1 */ + PINC, 0x00000008, /* Index 2 */ + PIND, 0x00000008, /* Index 3 */ + AINT, 0x00000008, /* Index 4 */ + SINT, 0x00000008, /* Index 5 */ + , 0x00000008, /* Index 6 */ + AAUD, 0x00000008, /* Index 7 */ + AMOD, 0x00000008, /* Index 8 */ + PINE, 0x00000008, /* Index 9 */ + PINF, 0x00000008, /* Index A */ + PING, 0x00000008, /* Index B */ + PINH, 0x00000008, /* Index C */ + } + + /* PCI Error control register */ + OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) + Field(PERC, ByteAcc, NoLock, Preserve) { + SENS, 0x00000001, + PENS, 0x00000001, + SENE, 0x00000001, + PENE, 0x00000001, + } + + /* Client Management index/data registers */ + OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) + Field(CMT, ByteAcc, NoLock, Preserve) { + CMTI, 8, + /* Client Management Data register */ + G64E, 1, + G64O, 1, + G32O, 2, + , 2, + GPSL, 2, + } + + /* GPM Port register */ + OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) + Field(GPT, ByteAcc, NoLock, Preserve) { + GPB0,1, + GPB1,1, + GPB2,1, + GPB3,1, + GPB4,1, + GPB5,1, + GPB6,1, + GPB7,1, + } + + /* Flash ROM program enable register */ + OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) + Field(FRE, ByteAcc, NoLock, Preserve) { + , 0x00000006, + FLRE, 0x00000001, + } + + /* PM2 index/data registers */ + OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) + Field(PM2R, ByteAcc, NoLock, Preserve) { + PM2I, 0x00000008, + PM2D, 0x00000008, + } + + /* Power Management I/O registers */ + OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) + Field(PIOR, ByteAcc, NoLock, Preserve) { + PIOI, 0x00000008, + PIOD, 0x00000008, + } + IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { + Offset(0x00), /* MiscControl */ + , 1, + T1EE, 1, + T2EE, 1, + Offset(0x01), /* MiscStatus */ + , 1, + T1E, 1, + T2E, 1, + Offset(0x04), /* SmiWakeUpEventEnable3 */ + , 7, + SSEN, 1, + Offset(0x07), /* SmiWakeUpEventStatus3 */ + , 7, + CSSM, 1, + Offset(0x10), /* AcpiEnable */ + , 6, + PWDE, 1, + Offset(0x1C), /* ProgramIoEnable */ + , 3, + MKME, 1, + IO3E, 1, + IO2E, 1, + IO1E, 1, + IO0E, 1, + Offset(0x1D), /* IOMonitorStatus */ + , 3, + MKMS, 1, + IO3S, 1, + IO2S, 1, + IO1S, 1, + IO0S,1, + Offset(0x20), /* AcpiPmEvtBlk */ + APEB, 16, + Offset(0x36), /* GEvtLevelConfig */ + , 6, + ELC6, 1, + ELC7, 1, + Offset(0x37), /* GPMLevelConfig0 */ + , 3, + PLC0, 1, + PLC1, 1, + PLC2, 1, + PLC3, 1, + PLC8, 1, + Offset(0x38), /* GPMLevelConfig1 */ + , 1, + PLC4, 1, + PLC5, 1, + , 1, + PLC6, 1, + PLC7, 1, + Offset(0x3B), /* PMEStatus1 */ + GP0S, 1, + GM4S, 1, + GM5S, 1, + APS, 1, + GM6S, 1, + GM7S, 1, + GP2S, 1, + STSS, 1, + Offset(0x55), /* SoftPciRst */ + SPRE, 1, + , 1, + , 1, + PNAT, 1, + PWMK, 1, + PWNS, 1, + + /* Offset(0x61), */ /* Options_1 */ + /* ,7, */ + /* R617,1, */ + + Offset(0x65), /* UsbPMControl */ + , 4, + URRE, 1, + Offset(0x68), /* MiscEnable68 */ + , 3, + TMTE, 1, + , 1, + Offset(0x92), /* GEVENTIN */ + , 7, + E7IS, 1, + Offset(0x96), /* GPM98IN */ + G8IS, 1, + G9IS, 1, + Offset(0x9A), /* EnhanceControl */ + ,7, + HPDE, 1, + Offset(0xA8), /* PIO7654Enable */ + IO4E, 1, + IO5E, 1, + IO6E, 1, + IO7E, 1, + Offset(0xA9), /* PIO7654Status */ + IO4S, 1, + IO5S, 1, + IO6S, 1, + IO7S, 1, + } + + /* PM1 Event Block + * First word is PM1_Status, Second word is PM1_Enable + */ + OperationRegion(P1EB, SystemIO, APEB, 0x04) + Field(P1EB, ByteAcc, NoLock, Preserve) { + TMST, 1, + , 3, + BMST, 1, + GBST, 1, + Offset(0x01), + PBST, 1, + , 1, + RTST, 1, + , 3, + PWST, 1, + SPWS, 1, + Offset(0x02), + TMEN, 1, + , 4, + GBEN, 1, + Offset(0x03), + PBEN, 1, + , 1, + RTEN, 1, + , 3, + PWDA, 1, + } + + Scope(\_SB) { + + /* PCIe Configuration Space for 16 busses */ + OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ + Field(PCFG, ByteAcc, NoLock, Preserve) { + /* Byte offsets are computed using the following technique: + * ((bus number + 1) * ((device number * 8) * 4096)) + register offset + * The 8 comes from 8 functions per device, and 4096 bytes per function config space + */ + Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ + STB5, 32, + Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ + PT0D, 1, + PT1D, 1, + PT2D, 1, + PT3D, 1, + PT4D, 1, + PT5D, 1, + PT6D, 1, + PT7D, 1, + PT8D, 1, + PT9D, 1, + Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ + SBIE, 1, + SBME, 1, + Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ + SBRI, 8, + Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ + SBB1, 32, + Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ + ,14, + P92E, 1, /* Port92 decode enable */ + } + + OperationRegion(SB5, SystemMemory, STB5, 0x1000) + Field(SB5, AnyAcc, NoLock, Preserve) + { + /* Port 0 */ + Offset(0x120), /* Port 0 Task file status */ + P0ER, 1, + , 2, + P0DQ, 1, + , 3, + P0BY, 1, + Offset(0x128), /* Port 0 Serial ATA status */ + P0DD, 4, + , 4, + P0IS, 4, + Offset(0x12C), /* Port 0 Serial ATA control */ + P0DI, 4, + Offset(0x130), /* Port 0 Serial ATA error */ + , 16, + P0PR, 1, + + /* Port 1 */ + offset(0x1A0), /* Port 1 Task file status */ + P1ER, 1, + , 2, + P1DQ, 1, + , 3, + P1BY, 1, + Offset(0x1A8), /* Port 1 Serial ATA status */ + P1DD, 4, + , 4, + P1IS, 4, + Offset(0x1AC), /* Port 1 Serial ATA control */ + P1DI, 4, + Offset(0x1B0), /* Port 1 Serial ATA error */ + , 16, + P1PR, 1, + + /* Port 2 */ + Offset(0x220), /* Port 2 Task file status */ + P2ER, 1, + , 2, + P2DQ, 1, + , 3, + P2BY, 1, + Offset(0x228), /* Port 2 Serial ATA status */ + P2DD, 4, + , 4, + P2IS, 4, + Offset(0x22C), /* Port 2 Serial ATA control */ + P2DI, 4, + Offset(0x230), /* Port 2 Serial ATA error */ + , 16, + P2PR, 1, + + /* Port 3 */ + Offset(0x2A0), /* Port 3 Task file status */ + P3ER, 1, + , 2, + P3DQ, 1, + , 3, + P3BY, 1, + Offset(0x2A8), /* Port 3 Serial ATA status */ + P3DD, 4, + , 4, + P3IS, 4, + Offset(0x2AC), /* Port 3 Serial ATA control */ + P3DI, 4, + Offset(0x2B0), /* Port 3 Serial ATA error */ + , 16, + P3PR, 1, + } + } + + Include ("routing.asl") + + Scope(\_SB) { + + Method(CkOT, 0){ + + if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */ + + if(CondRefOf(\_OSI,Local1)) + { + Store(1, OSTP) /* Assume some form of XP */ + if (\_OSI("Windows 2006")) /* Vista */ + { + Store(2, OSTP) + } + } else { + If(WCMP(\_OS,"Linux")) { + Store(3, OSTP) /* Linux */ + } Else { + Store(4, OSTP) /* Gotta be WinCE */ + } + } + Return(OSTP) + } + + Method(_PIC, 0x01, NotSerialized) + { + If (Arg0) + { + \_SB.CIRQ() + } + Store(Arg0, PMOD) + } + + Method(CIRQ, 0x00, NotSerialized) + { + Store(0, PINA) + Store(0, PINB) + Store(0, PINC) + Store(0, PIND) + Store(0, PINE) + Store(0, PINF) + Store(0, PING) + Store(0, PINH) + } + + Name(IRQB, ResourceTemplate(){ + IRQ(Level,ActiveLow,Shared){15} + }) + + Name(IRQP, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} + }) + + Name(PITF, ResourceTemplate(){ + IRQ(Level,ActiveLow,Exclusive){9} + }) + + Device(INTA) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 1) + + Method(_STA, 0) { + if (PINA) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTA._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKA\\_DIS\n") */ + Store(0, PINA) + } /* End Method(_SB.INTA._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKA\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTA._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKA\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINA, IRQN) + Return(IRQB) + } /* Method(_SB.INTA._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKA\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINA) + } /* End Method(_SB.INTA._SRS) */ + } /* End Device(INTA) */ + + Device(INTB) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 2) + + Method(_STA, 0) { + if (PINB) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTB._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKB\\_DIS\n") */ + Store(0, PINB) + } /* End Method(_SB.INTB._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKB\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTB._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKB\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINB, IRQN) + Return(IRQB) + } /* Method(_SB.INTB._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKB\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINB) + } /* End Method(_SB.INTB._SRS) */ + } /* End Device(INTB) */ + + Device(INTC) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 3) + + Method(_STA, 0) { + if (PINC) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTC._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKC\\_DIS\n") */ + Store(0, PINC) + } /* End Method(_SB.INTC._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKC\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTC._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKC\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINC, IRQN) + Return(IRQB) + } /* Method(_SB.INTC._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKC\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINC) + } /* End Method(_SB.INTC._SRS) */ + } /* End Device(INTC) */ + + Device(INTD) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 4) + + Method(_STA, 0) { + if (PIND) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTD._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKD\\_DIS\n") */ + Store(0, PIND) + } /* End Method(_SB.INTD._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKD\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTD._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKD\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PIND, IRQN) + Return(IRQB) + } /* Method(_SB.INTD._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKD\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PIND) + } /* End Method(_SB.INTD._SRS) */ + } /* End Device(INTD) */ + + Device(INTE) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 5) + + Method(_STA, 0) { + if (PINE) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTE._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKE\\_DIS\n") */ + Store(0, PINE) + } /* End Method(_SB.INTE._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKE\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTE._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKE\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINE, IRQN) + Return(IRQB) + } /* Method(_SB.INTE._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKE\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINE) + } /* End Method(_SB.INTE._SRS) */ + } /* End Device(INTE) */ + + Device(INTF) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 6) + + Method(_STA, 0) { + if (PINF) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTF._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKF\\_DIS\n") */ + Store(0, PINF) + } /* End Method(_SB.INTF._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKF\\_PRS\n") */ + Return(PITF) + } /* Method(_SB.INTF._PRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKF\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINF, IRQN) + Return(IRQB) + } /* Method(_SB.INTF._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKF\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINF) + } /* End Method(_SB.INTF._SRS) */ + } /* End Device(INTF) */ + + Device(INTG) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 7) + + Method(_STA, 0) { + if (PING) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTG._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKG\\_DIS\n") */ + Store(0, PING) + } /* End Method(_SB.INTG._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKG\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTG._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKG\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PING, IRQN) + Return(IRQB) + } /* Method(_SB.INTG._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKG\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PING) + } /* End Method(_SB.INTG._SRS) */ + } /* End Device(INTG) */ + + Device(INTH) { + Name(_HID, EISAID("PNP0C0F")) + Name(_UID, 8) + + Method(_STA, 0) { + if (PINH) { + Return(0x0B) /* sata is invisible */ + } else { + Return(0x09) /* sata is disabled */ + } + } /* End Method(_SB.INTH._STA) */ + + Method(_DIS ,0) { + /* DBGO("\\_SB\\LNKH\\_DIS\n") */ + Store(0, PINH) + } /* End Method(_SB.INTH._DIS) */ + + Method(_PRS ,0) { + /* DBGO("\\_SB\\LNKH\\_PRS\n") */ + Return(IRQP) + } /* Method(_SB.INTH._CRS) */ + + Method(_CRS ,0) { + /* DBGO("\\_SB\\LNKH\\_CRS\n") */ + CreateWordField(IRQB, 0x1, IRQN) + ShiftLeft(1, PINH, IRQN) + Return(IRQB) + } /* Method(_SB.INTH._CRS) */ + + Method(_SRS, 1) { + /* DBGO("\\_SB\\LNKH\\_CRS\n") */ + CreateWordField(ARG0, 1, IRQM) + + /* Use lowest available IRQ */ + FindSetRightBit(IRQM, Local0) + if (Local0) { + Decrement(Local0) + } + Store(Local0, PINH) + } /* End Method(_SB.INTH._SRS) */ + } /* End Device(INTH) */ + + } /* End Scope(_SB) */ + + + /* Supported sleep states: */ + Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ + + If (LAnd(SSFG, 0x01)) { + Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ + } + If (LAnd(SSFG, 0x02)) { + Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ + } + If (LAnd(SSFG, 0x04)) { + Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ + } + If (LAnd(SSFG, 0x08)) { + Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ + } + + Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ + + Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ + Name(CSMS, 0) /* Current System State */ + + /* Wake status package */ + Name(WKST,Package(){Zero, Zero}) + + /* + * \_PTS - Prepare to Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2, etc + * + * Exit: + * -none- + * + * The _PTS control method is executed at the beginning of the sleep process + * for S1-S5. The sleeping value is passed to the _PTS control method. This + * control method may be executed a relatively long time before entering the + * sleep state and the OS may abort the operation without notification to + * the ACPI driver. This method cannot modify the configuration or power + * state of any device in the system. + */ + Method(\_PTS, 1) { + /* DBGO("\\_PTS\n") */ + /* DBGO("From S0 to S") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + + /* Don't allow PCIRST# to reset USB */ + if (LEqual(Arg0,3)){ + Store(0,URRE) + } + + /* Clear sleep SMI status flag and enable sleep SMI trap. */ + /*Store(One, CSSM) + Store(One, SSEN)*/ + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\_SB.SBRI, 0x13)) { + * Store(0,\_SB.PWDE) + *} + */ + + /* Clear wake status structure. */ + Store(0, Index(WKST,0)) + Store(0, Index(WKST,1)) + \_SB.PCI0.SIOS (Arg0) + } /* End Method(\_PTS) */ + + /* + * The following method results in a "not a valid reserved NameSeg" + * warning so I have commented it out for the duration. It isn't + * used, so it could be removed. + * + * + * \_GTS OEM Going To Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + * + * Method(\_GTS, 1) { + * DBGO("\\_GTS\n") + * DBGO("From S0 to S") + * DBGO(Arg0) + * DBGO("\n") + * } + */ + + /* + * \_BFS OEM Back From Sleep method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * -none- + */ + Method(\_BFS, 1) { + /* DBGO("\\_BFS\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + } + + /* + * \_WAK System Wake method + * + * Entry: + * Arg0=The value of the sleeping state S1=1, S2=2 + * + * Exit: + * Return package of 2 DWords + * Dword 1 - Status + * 0x00000000 wake succeeded + * 0x00000001 Wake was signaled but failed due to lack of power + * 0x00000002 Wake was signaled but failed due to thermal condition + * Dword 2 - Power Supply state + * if non-zero the effective S-state the power supply entered + */ + Method(\_WAK, 1) { + /* DBGO("\\_WAK\n") */ + /* DBGO("From S") */ + /* DBGO(Arg0) */ + /* DBGO(" to S0\n") */ + + /* Re-enable HPET */ + Store(1,HPDE) + + /* Restore PCIRST# so it resets USB */ + if (LEqual(Arg0,3)){ + Store(1,URRE) + } + + /* Arbitrarily clear PciExpWakeStatus */ + Store(PWST, PWST) + + /* if(DeRefOf(Index(WKST,0))) { + * Store(0, Index(WKST,1)) + * } else { + * Store(Arg0, Index(WKST,1)) + * } + */ + \_SB.PCI0.SIOW (Arg0) + Return(WKST) + } /* End Method(\_WAK) */ + + Scope(\_GPE) { /* Start Scope GPE */ + /* General event 0 */ + /* Method(_L00) { + * DBGO("\\_GPE\\_L00\n") + * } + */ + + /* General event 1 */ + /* Method(_L01) { + * DBGO("\\_GPE\\_L00\n") + * } + */ + + /* General event 2 */ + /* Method(_L02) { + * DBGO("\\_GPE\\_L00\n") + * } + */ + + /* General event 3 */ + Method(_L03) { + /* DBGO("\\_GPE\\_L00\n") */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* General event 4 */ + /* Method(_L04) { + * DBGO("\\_GPE\\_L00\n") + * } + */ + + /* General event 5 */ + /* Method(_L05) { + * DBGO("\\_GPE\\_L00\n") + * } + */ + + /* General event 6 - Used for GPM6, moved to USB.asl */ + /* Method(_L06) { + * DBGO("\\_GPE\\_L00\n") + * } + */ + + /* General event 7 - Used for GPM7, moved to USB.asl */ + /* Method(_L07) { + * DBGO("\\_GPE\\_L07\n") + * } + */ + + /* Legacy PM event */ + Method(_L08) { + /* DBGO("\\_GPE\\_L08\n") */ + } + + /* Temp warning (TWarn) event */ + Method(_L09) { + /* DBGO("\\_GPE\\_L09\n") */ + Notify (\_TZ.TZ00, 0x80) + } + + /* Reserved */ + /* Method(_L0A) { + * DBGO("\\_GPE\\_L0A\n") + * } + */ + + /* USB controller PME# */ + Method(_L0B) { + /* DBGO("\\_GPE\\_L0B\n") */ + Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* AC97 controller PME# */ + /* Method(_L0C) { + * DBGO("\\_GPE\\_L0C\n") + * } + */ + + /* OtherTherm PME# */ + /* Method(_L0D) { + * DBGO("\\_GPE\\_L0D\n") + * } + */ + + /* GPM9 SCI event - Moved to USB.asl */ + /* Method(_L0E) { + * DBGO("\\_GPE\\_L0E\n") + * } + */ + + /* PCIe HotPlug event */ + /* Method(_L0F) { + * DBGO("\\_GPE\\_L0F\n") + * } + */ + + /* ExtEvent0 SCI event */ + Method(_L10) { + /* DBGO("\\_GPE\\_L10\n") */ + } + + + /* ExtEvent1 SCI event */ + Method(_L11) { + /* DBGO("\\_GPE\\_L11\n") */ + } + + /* PCIe PME# event */ + /* Method(_L12) { + * DBGO("\\_GPE\\_L12\n") + * } + */ + + /* GPM0 SCI event - Moved to USB.asl */ + /* Method(_L13) { + * DBGO("\\_GPE\\_L13\n") + * } + */ + + /* GPM1 SCI event - Moved to USB.asl */ + /* Method(_L14) { + * DBGO("\\_GPE\\_L14\n") + * } + */ + + /* GPM2 SCI event - Moved to USB.asl */ + /* Method(_L15) { + * DBGO("\\_GPE\\_L15\n") + * } + */ + + /* GPM3 SCI event - Moved to USB.asl */ + /* Method(_L16) { + * DBGO("\\_GPE\\_L16\n") + * } + */ + + /* GPM8 SCI event - Moved to USB.asl */ + /* Method(_L17) { + * DBGO("\\_GPE\\_L17\n") + * } + */ + + /* GPIO0 or GEvent8 event */ + Method(_L18) { + /* DBGO("\\_GPE\\_L18\n") */ + Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM4 SCI event - Moved to USB.asl */ + /* Method(_L19) { + * DBGO("\\_GPE\\_L19\n") + * } + */ + + /* GPM5 SCI event - Moved to USB.asl */ + /* Method(_L1A) { + * DBGO("\\_GPE\\_L1A\n") + * } + */ + + /* Azalia SCI event */ + Method(_L1B) { + /* DBGO("\\_GPE\\_L1B\n") */ + Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ + Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ + } + + /* GPM6 SCI event - Reassigned to _L06 */ + /* Method(_L1C) { + * DBGO("\\_GPE\\_L1C\n") + * } + */ + + /* GPM7 SCI event - Reassigned to _L07 */ + /* Method(_L1D) { + * DBGO("\\_GPE\\_L1D\n") + * } + */ + + /* GPIO2 or GPIO66 SCI event */ + /* Method(_L1E) { + * DBGO("\\_GPE\\_L1E\n") + * } + */ + + /* SATA SCI event - Moved to sata.asl */ + /* Method(_L1F) { + * DBGO("\\_GPE\\_L1F\n") + * } + */ + + } /* End Scope GPE */ + + Include ("usb.asl") + + /* South Bridge */ + Scope(\_SB) { /* Start \_SB scope */ + Include ("globutil.asl") /* global utility methods expected within the \_SB scope */ + + /* _SB.PCI0 */ + /* Note: Only need HID on Primary Bus */ + Device(PCI0) { + External (TOM1) + External (TOM2) + Name(_HID, EISAID("PNP0A03")) + Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ + Method(_BBN, 0) { /* Bus number = 0 */ + Return(0) + } + Method(_STA, 0) { + /* DBGO("\\_SB\\PCI0\\_STA\n") */ + Return(0x0B) /* Status is visible */ + } + + Method(_PRT,0) { + If(PMOD){ Return(APR0) } /* APIC mode */ + Return (PR0) /* PIC Mode */ + } /* end _PRT */ + + /* Describe the Northbridge devices */ + Device(AMRT) { + Name(_ADR, 0x00000000) + } /* end AMRT */ + + /* The internal GFX bridge */ + Device(AGPB) { + Name(_ADR, 0x00010000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + Return (APR1) + } + } /* end AGPB */ + + /* The external GFX bridge */ + Device(PBR2) { + Name(_ADR, 0x00020000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS2) } /* APIC mode */ + Return (PS2) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR2 */ + + /* Dev3 is also an external GFX bridge, not used in Herring */ + + Device(PBR4) { + Name(_ADR, 0x00040000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS4) } /* APIC mode */ + Return (PS4) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR4 */ + + Device(PBR5) { + Name(_ADR, 0x00050000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS5) } /* APIC mode */ + Return (PS5) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR5 */ + + Device(PBR6) { + Name(_ADR, 0x00060000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS6) } /* APIC mode */ + Return (PS6) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR6 */ + + /* The onboard EtherNet chip */ + Device(PBR7) { + Name(_ADR, 0x00070000) + Name(_PRW, Package() {0x18, 4}) + Method(_PRT,0) { + If(PMOD){ Return(APS7) } /* APIC mode */ + Return (PS7) /* PIC Mode */ + } /* end _PRT */ + } /* end PBR7 */ + + + /* PCI slot 1, 2, 3 */ + Device(PIBR) { + Name(_ADR, 0x00140004) + Name(_PRW, Package() {0x18, 4}) + + Method(_PRT, 0) { + Return (PCIB) + } + } + + /* Describe the Southbridge devices */ + Device(STCR) { + Name(_ADR, 0x00120000) + Include ("sata.asl") + } /* end STCR */ + + Device(UOH1) { + Name(_ADR, 0x00130000) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH1 */ + + Device(UOH2) { + Name(_ADR, 0x00130001) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH2 */ + + Device(UOH3) { + Name(_ADR, 0x00130002) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH3 */ + + Device(UOH4) { + Name(_ADR, 0x00130003) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH4 */ + + Device(UOH5) { + Name(_ADR, 0x00130004) + Name(_PRW, Package() {0x0B, 3}) + } /* end UOH5 */ + + Device(UEH1) { + Name(_ADR, 0x00130005) + Name(_PRW, Package() {0x0B, 3}) + } /* end UEH1 */ + + Device(SBUS) { + Name(_ADR, 0x00140000) + } /* end SBUS */ + + /* Primary (and only) IDE channel */ + Device(IDEC) { + Name(_ADR, 0x00140001) + Include ("ide.asl") + } /* end IDEC */ + + Device(AZHD) { + Name(_ADR, 0x00140002) + OperationRegion(AZPD, PCI_Config, 0x00, 0x100) + Field(AZPD, AnyAcc, NoLock, Preserve) { + offset (0x42), + NSDI, 1, + NSDO, 1, + NSEN, 1, + offset (0x44), + IPCR, 4, + offset (0x54), + PWST, 2, + , 6, + PMEB, 1, + , 6, + PMST, 1, + offset (0x62), + MMCR, 1, + offset (0x64), + MMLA, 32, + offset (0x68), + MMHA, 32, + offset (0x6C), + MMDT, 16, + } + + Method(_INI) { + If(LEqual(OSTP,3)){ /* If we are running Linux */ + Store(zero, NSEN) + Store(one, NSDO) + Store(one, NSDI) + } + } + } /* end AZHD */ + + Device(LIBR) { + Name(_ADR, 0x00140003) + /* Method(_INI) { + * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") + } */ /* End Method(_SB.SBRDG._INI) */ + + /* Real Time Clock Device */ + Device(RTC0) { + Name(_HID, EISAID("PNP0B01")) /* AT Real Time Clock */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){8} + IO(Decode16,0x0070, 0x0070, 0, 2) + /* IO(Decode16,0x0070, 0x0070, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ + + Device(TMR) { /* Timer */ + Name(_HID,EISAID("PNP0100")) /* System Timer */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){0} + IO(Decode16, 0x0040, 0x0040, 0, 4) + /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ + + Device(SPKR) { /* Speaker */ + Name(_HID,EISAID("PNP0800")) /* AT style speaker */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x0061, 0x0061, 0, 1) + }) + } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ + + Device(PIC) { + Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ + Name(_CRS, ResourceTemplate() { + IRQNoFlags(){2} + IO(Decode16,0x0020, 0x0020, 0, 2) + IO(Decode16,0x00A0, 0x00A0, 0, 2) + /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ + /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ + }) + } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ + + Device(MAD) { /* 8257 DMA */ + Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ + Name(_CRS, ResourceTemplate() { + DMA(Compatibility,BusMaster,Transfer8){4} + IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) + IO(Decode16, 0x0081, 0x0081, 0x10, 0x03) + IO(Decode16, 0x0087, 0x0087, 0x10, 0x01) + IO(Decode16, 0x0089, 0x0089, 0x10, 0x03) + IO(Decode16, 0x008F, 0x008F, 0x10, 0x01) + IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) + }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ + } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ + + Device(COPR) { + Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ + Name(_CRS, ResourceTemplate() { + IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) + IRQNoFlags(){13} + }) + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + + Device(HPTM) { + Name(_HID,EISAID("PNP0103")) + Name(CRS,ResourceTemplate() { + Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ + }) + Method(_STA, 0) { + Return(0x0F) /* sata is visible */ + } + Method(_CRS, 0) { + CreateDwordField(CRS, ^HPT._BAS, HPBA) + Store(HPBA, HPBA) + Return(CRS) + } + } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ + } /* end LIBR */ + + Device(HPBR) { + Name(_ADR, 0x00140004) + } /* end HostPciBr */ + + Device(ACAD) { + Name(_ADR, 0x00140005) + } /* end Ac97audio */ + + Device(ACMD) { + Name(_ADR, 0x00140006) + } /* end Ac97modem */ + + /* ITE IT8712F Support */ + OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ + Field (IOID, ByteAcc, NoLock, Preserve) + { + SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ + } + + IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) + { + Offset (0x07), + LDN, 8, /* Logical Device Number */ + Offset (0x20), + CID1, 8, /* Chip ID Byte 1, 0x87 */ + CID2, 8, /* Chip ID Byte 2, 0x12 */ + Offset (0x30), + ACTR, 8, /* Function activate */ + Offset (0xF0), + APC0, 8, /* APC/PME Event Enable Register */ + APC1, 8, /* APC/PME Status Register */ + APC2, 8, /* APC/PME Control Register 1 */ + APC3, 8, /* Environment Controller Special Configuration Register */ + APC4, 8 /* APC/PME Control Register 2 */ + } + + /* Enter the IT8712F MB PnP Mode */ + Method (EPNP) + { + Store(0x87, SIOI) + Store(0x01, SIOI) + Store(0x55, SIOI) + Store(0x55, SIOI) /* IT8712F magic number */ + } + /* Exit the IT8712F MB PnP Mode */ + Method (XPNP) + { + Store (0x02, SIOI) + Store (0x02, SIOD) + } + + /* + * Keyboard PME is routed to SB600 Gevent3. We can wake + * up the system by pressing the key. + */ + Method (SIOS, 1) + { + /* We only enable KBD PME for S5. */ + If (LLess (Arg0, 0x05)) + { + EPNP() + /* DBGO("IT8712F\n") */ + + Store (0x4, LDN) + Store (One, ACTR) /* Enable EC */ + /* + Store (0x4, LDN) + Store (0x04, APC4) + */ /* falling edge. which mode? Not sure. */ + + Store (0x4, LDN) + Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ + Store (0x4, LDN) + Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ + + XPNP() + } + } + Method (SIOW, 1) + { + EPNP() + Store (0x4, LDN) + Store (Zero, APC0) /* disable keyboard PME */ + Store (0x4, LDN) + Store (0xFF, APC1) /* clear keyboard PME status */ + XPNP() + } + + Name(CRES, ResourceTemplate() { + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x0CF7, /* range maximum */ + 0x0000, /* translation */ + 0x0CF8 /* length */ + ) + + WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, + 0x0000, /* address granularity */ + 0x0D00, /* range minimum */ + 0xFFFF, /* range maximum */ + 0x0000, /* translation */ + 0xF300 /* length */ + ) + + Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) + Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ + Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ + Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ + + /* DRAM Memory from 1MB to TopMem */ + Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ + + /* BIOS space just below 4GB */ + DWORDMemory( + ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0x00, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PCBM + ) + + /* DRAM memory from 4GB to TopMem2 */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + DMHI + ) + + /* BIOS space just below 16EB */ + QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, + 0xFFFFFFFF, /* Granularity */ + 0x00000000, /* Min */ + 0x00000000, /* Max */ + 0x00000000, /* Translation */ + 0x00000000, /* Max-Min, RLEN */ + ,, + PEBM + ) + + }) /* End Name(_SB.PCI0.CRES) */ + + Method(_CRS, 0) { + /* DBGO("\\_SB\\PCI0\\_CRS\n") */ + + CreateDWordField(CRES, ^EMM1._BAS, EM1B) + CreateDWordField(CRES, ^EMM1._LEN, EM1L) + CreateDWordField(CRES, ^DMLO._BAS, DMLB) + CreateDWordField(CRES, ^DMLO._LEN, DMLL) + CreateDWordField(CRES, ^PCBM._MIN, PBMB) + CreateDWordField(CRES, ^PCBM._LEN, PBML) + + CreateQWordField(CRES, ^DMHI._MIN, DMHB) + CreateQWordField(CRES, ^DMHI._LEN, DMHL) + CreateQWordField(CRES, ^PEBM._MIN, EBMB) + CreateQWordField(CRES, ^PEBM._LEN, EBML) + + If(LGreater(LOMH, 0xC0000)){ + Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ + Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ + } + + /* Set size of memory from 1MB to TopMem */ + Subtract(TOM1, 0x100000, DMLL) + + /* + * If(LNotEqual(TOM2, 0x00000000)){ + * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 + * Subtract(TOM2, 0x100000000, DMHL) + * } + */ + + /* If there is no memory above 4GB, put the BIOS just below 4GB */ + If(LEqual(TOM2, 0x00000000)){ + Store(PBAD,PBMB) /* Reserve the "BIOS" space */ + Store(PBLN,PBML) + } + Else { /* Otherwise, put the BIOS just below 16EB */ + ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ + Store(PBLN,EBML) + } + + Return(CRES) /* note to change the Name buffer */ + } /* end of Method(_SB.PCI0._CRS) */ + + /* + * + * FIRST METHOD CALLED UPON BOOT + * + * 1. If debugging, print current OS and ACPI interpreter. + * 2. Get PCI Interrupt routing from ACPI VSM, this + * value is based on user choice in BIOS setup. + */ + Method(_INI, 0) { + /* DBGO("\\_SB\\_INI\n") */ + /* DBGO(" DSDT.ASL code from ") */ + /* DBGO(__DATE__) */ + /* DBGO(" ") */ + /* DBGO(__TIME__) */ + /* DBGO("\n Sleep states supported: ") */ + /* DBGO("\n") */ + /* DBGO(" \\_OS=") */ + /* DBGO(\_OS) */ + /* DBGO("\n \\_REV=") */ + /* DBGO(\_REV) */ + /* DBGO("\n") */ + + /* Determine the OS we're running on */ + CkOT() + + /* On older chips, clear PciExpWakeDisEn */ + /*if (LLessEqual(\SBRI, 0x13)) { + * Store(0,\PWDE) + * } + */ + } /* End Method(_SB._INI) */ + } /* End Device(PCI0) */ + + Device(PWRB) { /* Start Power button device */ + Name(_HID, EISAID("PNP0C0C")) + Name(_UID, 0xAA) + Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ + Name(_STA, 0x0B) /* sata is invisible */ + } + } /* End \_SB scope */ + + Scope(\_SI) { + Method(_SST, 1) { + /* DBGO("\\_SI\\_SST\n") */ + /* DBGO(" New Indicator state: ") */ + /* DBGO(Arg0) */ + /* DBGO("\n") */ + } + } /* End Scope SI */ + + Mutex (SBX0, 0x00) + OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) + Field (SMB0, ByteAcc, NoLock, Preserve) { + HSTS, 8, /* SMBUS status */ + SSTS, 8, /* SMBUS slave status */ + HCNT, 8, /* SMBUS control */ + HCMD, 8, /* SMBUS host cmd */ + HADD, 8, /* SMBUS address */ + DAT0, 8, /* SMBUS data0 */ + DAT1, 8, /* SMBUS data1 */ + BLKD, 8, /* SMBUS block data */ + SCNT, 8, /* SMBUS slave control */ + SCMD, 8, /* SMBUS shaow cmd */ + SEVT, 8, /* SMBUS slave event */ + SDAT, 8 /* SMBUS slave data */ + } + + Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ + Store (0x1E, HSTS) + Store (0xFA, Local0) + While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { + Stall (0x64) + Decrement (Local0) + } + + Return (Local0) + } + + Method (SWTC, 1, NotSerialized) { + Store (Arg0, Local0) + Store (0x07, Local2) + Store (One, Local1) + While (LEqual (Local1, One)) { + Store (And (HSTS, 0x1E), Local3) + If (LNotEqual (Local3, Zero)) { /* read sucess */ + If (LEqual (Local3, 0x02)) { + Store (Zero, Local2) + } + + Store (Zero, Local1) + } + Else { + If (LLess (Local0, 0x0A)) { /* read failure */ + Store (0x10, Local2) + Store (Zero, Local1) + } + Else { + Sleep (0x0A) /* 10 ms, try again */ + Subtract (Local0, 0x0A, Local0) + } + } + } + + Return (Local2) + } + + Method (SMBR, 3, NotSerialized) { + Store (0x07, Local0) + If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { + Store (WCLR (), Local0) /* clear SMBUS status register before read data */ + If (LEqual (Local0, Zero)) { + Release (SBX0) + Return (0x0) + } + + Store (0x1F, HSTS) + Store (Or (ShiftLeft (Arg1, One), One), HADD) + Store (Arg2, HCMD) + If (LEqual (Arg0, 0x07)) { + Store (0x48, HCNT) /* read byte */ + } + + Store (SWTC (0x03E8), Local1) /* 1000 ms */ + If (LEqual (Local1, Zero)) { + If (LEqual (Arg0, 0x07)) { + Store (DAT0, Local0) + } + } + Else { + Store (Local1, Local0) + } + + Release (SBX0) + } + + /* DBGO("the value of SMBusData0 register ") */ + /* DBGO(Arg2) */ + /* DBGO(" is ") */ + /* DBGO(Local0) */ + /* DBGO("\n") */ + + Return (Local0) + } + + /* THERMAL */ + Scope(\_TZ) { + Name (KELV, 2732) + Name (THOT, 800) + Name (TCRT, 850) + + ThermalZone(TZ00) { + Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ + /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ + Return(Add(0, 2730)) + } + Method(_AL0,0) { /* Returns package of cooling device to turn on */ + /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ + Return(Package() {\_TZ.TZ00.FAN0}) + } + Device (FAN0) { + Name(_HID, EISAID("PNP0C0B")) + Name(_PR0, Package() {PFN0}) + } + + PowerResource(PFN0,0,0) { + Method(_STA) { + Store(0xF,Local0) + Return(Local0) + } + Method(_ON) { + /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ + } + Method(_OFF) { + /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ + } + } + + Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ + /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ + Return (Add (THOT, KELV)) + } + Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ + /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ + Return (Add (TCRT, KELV)) + } + Method(_TMP,0) { /* return current temp of this zone */ + Store (SMBR (0x07, 0x4C,, 0x00), Local0) + If (LGreater (Local0, 0x10)) { + Store (Local0, Local1) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400, KELV)) + } + + Store (SMBR (0x07, 0x4C, 0x01), Local0) + /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ + /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ + If (LGreater (Local0, 0x10)) { + If (LGreater (Local0, Local1)) { + Store (Local0, Local1) + } + + Multiply (Local1, 10, Local1) + Return (Add (Local1, KELV)) + } + Else { + Add (Local0, THOT, Local0) + Return (Add (400 , KELV)) + } + } /* end of _TMP */ + } /* end of TZ00 */ + } +} +/* End of ASL file */ diff --git a/src/mainboard/technexion/tim8690/acpi/globutil.asl b/src/mainboard/technexion/tim8690/acpi/globutil.asl new file mode 100644 index 0000000000..7265608a4b --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/globutil.asl @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope(\_SB) { + Include ("globutil.asl") +} +*/ + +/* string compare functions */ +Method(MIN, 2) +{ + if (LLess(Arg0, Arg1)) { + Return(Arg0) + } else { + Return(Arg1) + } +} + +Method(SLEN, 1) +{ + Store(Arg0, Local0) + Return(Sizeof(Local0)) +} + +Method(S2BF, 1) +{ + Add(SLEN(Arg0), One, Local0) + Name(BUFF, Buffer(Local0) {}) + Store(Arg0, BUFF) + Return(BUFF) +} + +/* Strong string compare. Checks both length and content */ +Method(SCMP, 2) +{ + Store(S2BF(Arg0), Local0) + Store(S2BF(Arg1), Local1) + Store(Zero, Local4) + Store(SLEN(Arg0), Local5) + Store(SLEN(Arg1), Local6) + Store(MIN(Local5, Local6), Local7) + + While(LLess(Local4, Local7)) { + Store(Derefof(Index(Local0, Local4)), Local2) + Store(Derefof(Index(Local1, Local4)), Local3) + if (LGreater(Local2, Local3)) { + Return(One) + } else { + if (LLess(Local2, Local3)) { + Return(Ones) + } + } + Increment(Local4) + } + if (LLess(Local4, Local5)) { + Return(One) + } else { + if (LLess(Local4, Local6)) { + Return(Ones) + } else { + Return(Zero) + } + } +} + +/* Weak string compare. Checks to find Arg1 at beginning of Arg0. +* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on +* Pass. +*/ +Method(WCMP, 2) +{ + Store(S2BF(Arg0), Local0) + Store(S2BF(Arg1), Local1) + if (LLess(SLEN(Arg0), SLEN(Arg1))) { + Return(0) + } + Store(Zero, Local2) + Store(SLEN(Arg1), Local3) + + While(LLess(Local2, Local3)) { + if (LNotEqual(Derefof(Index(Local0, Local2)), + Derefof(Index(Local1, Local2)))) { + Return(0) + } + Increment(Local2) + } + Return(One) +} + +/* ARG0 = IRQ Number(0-15) +* Returns Bit Map +*/ +Method(I2BM, 1) +{ + Store(0, Local0) + if (LNotEqual(ARG0, 0)) { + Store(1, Local1) + ShiftLeft(Local1, ARG0, Local0) + } + Return(Local0) +} diff --git a/src/mainboard/technexion/tim8690/acpi/ide.asl b/src/mainboard/technexion/tim8690/acpi/ide.asl new file mode 100644 index 0000000000..75aa72c781 --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/ide.asl @@ -0,0 +1,244 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(IDEC) { + Name(_ADR, 0x00140001) + Include ("ide.asl") + } + } +} +*/ + +/* Some timing tables */ +Name(UDTT, Package(){ /* Udma timing table */ + 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ +}) + +Name(MDTT, Package(){ /* MWDma timing table */ + 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ +}) + +Name(POTT, Package(){ /* Pio timing table */ + 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ +}) + +/* Some timing register value tables */ +Name(MDRT, Package(){ /* MWDma timing register table */ + 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ +}) + +Name(PORT, Package(){ + 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ +}) + +OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */ + Field(ICRG, AnyAcc, NoLock, Preserve) +{ + PPTS, 8, /* Primary PIO Slave Timing */ + PPTM, 8, /* Primary PIO Master Timing */ + OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */ + PMTM, 8, /* Primary MWDMA Master Timing */ + OFFSET(0x08), PPCR, 8, /* Primary PIO Control */ + OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */ + PPSM, 4, /* Primary PIO slave Mode */ + OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */ + OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */ + PDSM, 4, /* Primary UltraDMA Mode */ +} + +Method(GTTM, 1) /* get total time*/ +{ + Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ + Increment(Local0) + Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ + Increment(Local1) + Return(Multiply(30, Add(Local0, Local1))) +} + +Device(PRID) +{ + Name (_ADR, Zero) + Method(_GTM, 0) + { + NAME(OTBF, Buffer(20) { /* out buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ + CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ + + /* Just return if the channel is disabled */ + If(And(PPCR, 0x01)) { /* primary PIO control */ + Return(OTBF) + } + + /* Always tell them independent timing available and IOChannelReady used on both drives */ + Or(BFFG, 0x1A, BFFG) + + Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ + Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ + + If(And(PDCR, 0x01)) { /* It's under UDMA mode */ + Or(BFFG, 0x01, BFFG) + Store(DerefOf(Index(UDTT, PDMM)), DSD0) + } + Else { + Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ + } + + If(And(PDCR, 0x02)) { /* It's under UDMA mode */ + Or(BFFG, 0x04, BFFG) + Store(DerefOf(Index(UDTT, PDSM)), DSD1) + } + Else { + Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ + } + + Return(OTBF) /* out buffer */ + } /* End Method(_GTM) */ + + Method(_STM, 3, NotSerialized) + { + NAME(INBF, Buffer(20) { /* in buffer */ + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 + }) + + CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ + CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ + CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ + CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ + CreateDwordField(INBF, 16, BFFG) /*buffer flag */ + + Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) + Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ + Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) + Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ + + Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ + Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ + + If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) + Divide(Local0, 7, PDMM,) + Or(PDCR, 0x01, PDCR) + } + Else { + If(LNotEqual(DSD0, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTM) + } + } + + If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ + Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) + Divide(Local0, 7, PDSM,) + Or(PDCR, 0x02, PDCR) + } + Else { + If(LNotEqual(DSD1, 0xFFFFFFFF)) { + Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) + Store(DerefOf(Index(MDRT, Local0)), PMTS) + } + } + /* Return(INBF) */ + } /*End Method(_STM) */ + Device(MST) + { + Name(_ADR, 0) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xA0, CMDA) + Store(0xA0, CMDB) + Store(0xA0, CMDC) + + Or(PPMM, 0x08, POMD) + + If(And(PDCR, 0x01)) { + Or(PDMM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTM), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(MST) */ + + Device(SLAV) + { + Name(_ADR, 1) + Method(_GTF) { + Name(CMBF, Buffer(21) { + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 + }) + CreateByteField(CMBF, 1, POMD) + CreateByteField(CMBF, 8, DMMD) + CreateByteField(CMBF, 5, CMDA) + CreateByteField(CMBF, 12, CMDB) + CreateByteField(CMBF, 19, CMDC) + + Store(0xB0, CMDA) + Store(0xB0, CMDB) + Store(0xB0, CMDC) + + Or(PPSM, 0x08, POMD) + + If(And(PDCR, 0x02)) { + Or(PDSM, 0x40, DMMD) + } + Else { + Store(Match + (MDTT, MLE, GTTM(PMTS), + MTR, 0, 0), Local0) + If(LLess(Local0, 3)) { + Or(0x20, Local0, DMMD) + } + } + Return(CMBF) + } + } /* End Device(SLAV) */ +} diff --git a/src/mainboard/technexion/tim8690/acpi/routing.asl b/src/mainboard/technexion/tim8690/acpi/routing.asl new file mode 100644 index 0000000000..25e99f21c9 --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/routing.asl @@ -0,0 +1,258 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + Include ("routing.asl") + } +*/ + +/* Routing is in System Bus scope */ +Scope(\_SB) { + Name(PR0, Package(){ + /* NB devices */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, INTC, 0 }, + Package(){0x0002FFFF, 1, INTD, 0 }, + Package(){0x0002FFFF, 2, INTA, 0 }, + Package(){0x0002FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, INTA, 0 }, + Package(){0x0004FFFF, 1, INTB, 0 }, + Package(){0x0004FFFF, 2, INTC, 0 }, + Package(){0x0004FFFF, 3, INTD, 0 }, + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + /* Package(){0x0005FFFF, 0, INTB, 0 }, */ + /* Package(){0x0005FFFF, 1, INTC, 0 }, */ + /* Package(){0x0005FFFF, 2, INTD, 0 }, */ + /* Package(){0x0005FFFF, 3, INTA, 0 }, */ + /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */ + Package(){0x0006FFFF, 0, INTC, 0 }, + Package(){0x0006FFFF, 1, INTD, 0 }, + Package(){0x0006FFFF, 2, INTA, 0 }, + Package(){0x0006FFFF, 3, INTB, 0 }, + /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ + Package(){0x0007FFFF, 0, INTD, 0 }, + Package(){0x0007FFFF, 1, INTA, 0 }, + Package(){0x0007FFFF, 2, INTB, 0 }, + Package(){0x0007FFFF, 3, INTC, 0 }, + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 1, INTA, 0 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, INTA, 0 }, + Package(){0x0013FFFF, 1, INTB, 0 }, + Package(){0x0013FFFF, 2, INTC, 0 }, + Package(){0x0013FFFF, 3, INTD, 0 }, + + /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ + Package(){0x0014FFFF, 0, INTA, 0 }, + Package(){0x0014FFFF, 1, INTB, 0 }, + Package(){0x0014FFFF, 2, INTC, 0 }, + Package(){0x0014FFFF, 3, INTD, 0 }, + }) + + Name(APR0, Package(){ + /* NB devices in APIC mode */ + /* Bus 0, Dev 0 - RS690 Host Controller */ + + /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */ + /* Package(){0x0001FFFF, 0, 0, 18 }, */ + /* package(){0x0001FFFF, 1, 0, 19 }, */ + + /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */ + Package(){0x0002FFFF, 0, 0, 18 }, + /* Package(){0x0002FFFF, 1, 0, 19 }, */ + /* Package(){0x0002FFFF, 2, 0, 16 }, */ + /* Package(){0x0002FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */ + Package(){0x0003FFFF, 0, 0, 19 }, + + /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */ + Package(){0x0004FFFF, 0, 0, 16 }, + /* Package(){0x0004FFFF, 1, 0, 17 }, */ + /* Package(){0x0004FFFF, 2, 0, 18 }, */ + /* Package(){0x0004FFFF, 3, 0, 19 }, */ + + /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */ + Package(){0x0005FFFF, 0, 0, 17 }, + /* Package(){0x0005FFFF, 1, 0, 18 }, */ + /* Package(){0x0005FFFF, 2, 0, 19 }, */ + /* Package(){0x0005FFFF, 3, 0, 16 }, */ + + /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */ + Package(){0x0006FFFF, 0, 0, 18 }, + /* Package(){0x0006FFFF, 1, 0, 19 }, */ + /* Package(){0x0006FFFF, 2, 0, 16 }, */ + /* Package(){0x0006FFFF, 3, 0, 17 }, */ + + /* Bus 0, Dev 7 - PCIe Bridge for network card */ + Package(){0x0007FFFF, 0, 0, 19 }, + /* Package(){0x0007FFFF, 1, 0, 16 }, */ + /* Package(){0x0007FFFF, 2, 0, 17 }, */ + /* Package(){0x0007FFFF, 3, 0, 18 }, */ + + /* Bus 0, Funct 8 - Southbridge port (normally hidden) */ + + /* SB devices in APIC mode */ + /* Bus 0, Dev 17 - SATA controller #2 */ + /* Bus 0, Dev 18 - SATA controller #1 */ + Package(){0x0012FFFF, 0, 0, 22 }, + + /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ + Package(){0x0013FFFF, 0, 0, 16 }, + Package(){0x0013FFFF, 1, 0, 17 }, + Package(){0x0013FFFF, 2, 0, 18 }, + Package(){0x0013FFFF, 3, 0, 19 }, + /* Package(){0x00130004, 2, 0, 18 }, */ + /* Package(){0x00130005, 3, 0, 19 }, */ + + /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ + Package(){0x0014FFFF, 0, 0, 16 }, + Package(){0x0014FFFF, 1, 0, 17 }, + Package(){0x0014FFFF, 2, 0, 18 }, + Package(){0x0014FFFF, 3, 0, 19 }, + /* Package(){0x00140004, 2, 0, 18 }, */ + /* Package(){0x00140004, 3, 0, 19 }, */ + /* Package(){0x00140005, 1, 0, 17 }, */ + /* Package(){0x00140006, 1, 0, 17 }, */ + }) + + Name(PR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, INTA, 0 }, + Package(){0x0005FFFF, 1, INTB, 0 }, + Package(){0x0005FFFF, 2, INTC, 0 }, + Package(){0x0005FFFF, 3, INTD, 0 }, + }) + + Name(APR1, Package(){ + /* Internal graphics - RS690 VGA, Bus1, Dev5 */ + Package(){0x0005FFFF, 0, 0, 18 }, + Package(){0x0005FFFF, 1, 0, 19 }, + /* Package(){0x0005FFFF, 2, 0, 20 }, */ + /* Package(){0x0005FFFF, 3, 0, 17 }, */ + }) + + Name(PS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS2, Package(){ + /* The external GFX - Hooked to PCIe slot 2 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, INTA, 0 }, + Package(){0x0000FFFF, 1, INTB, 0 }, + Package(){0x0000FFFF, 2, INTC, 0 }, + Package(){0x0000FFFF, 3, INTD, 0 }, + }) + + Name(APS4, Package(){ + /* PCIe slot - Hooked to PCIe slot 4 */ + Package(){0x0000FFFF, 0, 0, 16 }, + Package(){0x0000FFFF, 1, 0, 17 }, + Package(){0x0000FFFF, 2, 0, 18 }, + Package(){0x0000FFFF, 3, 0, 19 }, + }) + + Name(PS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, INTB, 0 }, + Package(){0x0000FFFF, 1, INTC, 0 }, + Package(){0x0000FFFF, 2, INTD, 0 }, + Package(){0x0000FFFF, 3, INTA, 0 }, + }) + + Name(APS5, Package(){ + /* PCIe slot - Hooked to PCIe slot 5 */ + Package(){0x0000FFFF, 0, 0, 17 }, + Package(){0x0000FFFF, 1, 0, 18 }, + Package(){0x0000FFFF, 2, 0, 19 }, + Package(){0x0000FFFF, 3, 0, 16 }, + }) + + Name(PS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, INTC, 0 }, + Package(){0x0000FFFF, 1, INTD, 0 }, + Package(){0x0000FFFF, 2, INTA, 0 }, + Package(){0x0000FFFF, 3, INTB, 0 }, + }) + + Name(APS6, Package(){ + /* PCIe slot - Hooked to PCIe slot 6 */ + Package(){0x0000FFFF, 0, 0, 18 }, + Package(){0x0000FFFF, 1, 0, 19 }, + Package(){0x0000FFFF, 2, 0, 16 }, + Package(){0x0000FFFF, 3, 0, 17 }, + }) + + Name(PS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, INTD, 0 }, + Package(){0x0000FFFF, 1, INTA, 0 }, + Package(){0x0000FFFF, 2, INTB, 0 }, + Package(){0x0000FFFF, 3, INTC, 0 }, + }) + + Name(APS7, Package(){ + /* The onboard Ethernet chip - Hooked to PCIe slot 7 */ + Package(){0x0000FFFF, 0, 0, 19 }, + Package(){0x0000FFFF, 1, 0, 16 }, + Package(){0x0000FFFF, 2, 0, 17 }, + Package(){0x0000FFFF, 3, 0, 18 }, + }) + + Name(PCIB, Package(){ + /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */ + Package(){0x0005FFFF, 0, 0, 0x14 }, + Package(){0x0005FFFF, 1, 0, 0x15 }, + Package(){0x0005FFFF, 2, 0, 0x16 }, + Package(){0x0005FFFF, 3, 0, 0x17 }, + Package(){0x0006FFFF, 0, 0, 0x15 }, + Package(){0x0006FFFF, 1, 0, 0x16 }, + Package(){0x0006FFFF, 2, 0, 0x17 }, + Package(){0x0006FFFF, 3, 0, 0x14 }, + Package(){0x0007FFFF, 0, 0, 0x16 }, + Package(){0x0007FFFF, 1, 0, 0x17 }, + Package(){0x0007FFFF, 2, 0, 0x14 }, + Package(){0x0007FFFF, 3, 0, 0x15 }, + }) +} diff --git a/src/mainboard/technexion/tim8690/acpi/sata.asl b/src/mainboard/technexion/tim8690/acpi/sata.asl new file mode 100644 index 0000000000..a67703d6ca --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/sata.asl @@ -0,0 +1,149 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ + +/* +Scope (_SB) { + Device(PCI0) { + Device(SATA) { + Name(_ADR, 0x00120000) + Include ("sata.asl") + } + } +} +*/ + +Name(STTM, Buffer(20) { + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, + 0x1f, 0x00, 0x00, 0x00 +}) + +/* Start by clearing the PhyRdyChg bits */ +Method(_INI) { + \_GPE._L1F() +} + +Device(PMRY) +{ + Name(_ADR, 0) + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(PMST) { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P0IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + }/* end of PMST */ + + Device(PSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P1IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of PSLA */ +} /* end of PMRY */ + + +Device(SEDY) +{ + Name(_ADR, 1) /* IDE Scondary Channel */ + Method(_GTM, 0x0, NotSerialized) { + Return(STTM) + } + Method(_STM, 0x3, NotSerialized) {} + + Device(SMST) + { + Name(_ADR, 0) + Method(_STA,0) { + if (LGreater(P2IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SMST */ + + Device(SSLA) + { + Name(_ADR, 1) + Method(_STA,0) { + if (LGreater(P3IS,0)) { + return (0x0F) /* sata is visible */ + } + else { + return (0x00) /* sata is missing */ + } + } + } /* end of SSLA */ +} /* end of SEDY */ + +/* SATA Hot Plug Support */ +Scope(\_GPE) { + Method(_L1F,0x0,NotSerialized) { + if (\_SB.P0PR) { + if (LGreater(\_SB.P0IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P0PR) + } + + if (\_SB.P1PR) { + if (LGreater(\_SB.P1IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P1PR) + } + + if (\_SB.P2PR) { + if (LGreater(\_SB.P2IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P2PR) + } + + if (\_SB.P3PR) { + if (LGreater(\_SB.P3IS,0)) { + sleep(32) + } + Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ + store(one, \_SB.P3PR) + } + } +} diff --git a/src/mainboard/technexion/tim8690/acpi/statdef.asl b/src/mainboard/technexion/tim8690/acpi/statdef.asl new file mode 100644 index 0000000000..12a5932a12 --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/statdef.asl @@ -0,0 +1,93 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +/* Status and notification definitions */ + +#define STA_MISSING 0x00 +#define STA_PRESENT 0x01 +#define STA_ENABLED 0x03 +#define STA_DISABLED 0x09 +#define STA_INVISIBLE 0x0B +#define STA_UNAVAILABLE 0x0D +#define STA_VISIBLE 0x0F + +/* SMBus status codes */ +#define SMB_OK 0x00 +#define SMB_UnknownFail 0x07 +#define SMB_DevAddrNAK 0x10 +#define SMB_DeviceError 0x11 +#define SMB_DevCmdDenied 0x12 +#define SMB_UnknownErr 0x13 +#define SMB_DevAccDenied 0x17 +#define SMB_Timeout 0x18 +#define SMB_HstUnsuppProtocol 0x19 +#define SMB_Busy 0x1A +#define SMB_PktChkError 0x1F + +/* Device Object Notification Values */ +#define NOTIFY_BUS_CHECK 0x00 +#define NOTIFY_DEVICE_CHECK 0x01 +#define NOTIFY_DEVICE_WAKE 0x02 +#define NOTIFY_EJECT_REQUEST 0x03 +#define NOTIFY_DEVICE_CHECK_JR 0x04 +#define NOTIFY_FREQUENCY_ERROR 0x05 +#define NOTIFY_BUS_MODE 0x06 +#define NOTIFY_POWER_FAULT 0x07 +#define NOTIFY_CAPABILITIES 0x08 +#define NOTIFY_PLD_CHECK 0x09 +#define NOTIFY_SLIT_UPDATE 0x0B + +/* Battery Device Notification Values */ +#define NOTIFY_BAT_STATUSCHG 0x80 +#define NOTIFY_BAT_INFOCHG 0x81 +#define NOTIFY_BAT_MAINTDATA 0x82 + +/* Power Source Object Notification Values */ +#define NOTIFY_PWR_STATUSCHG 0x80 + +/* Thermal Zone Object Notification Values */ +#define NOTIFY_TZ_STATUSCHG 0x80 +#define NOTIFY_TZ_TRIPPTCHG 0x81 +#define NOTIFY_TZ_DEVLISTCHG 0x82 +#define NOTIFY_TZ_RELTBLCHG 0x83 + +/* Power Button Notification Values */ +#define NOTIFY_POWER_BUTTON 0x80 + +/* Sleep Button Notification Values */ +#define NOTIFY_SLEEP_BUTTON 0x80 + +/* Lid Notification Values */ +#define NOTIFY_LID_STATUSCHG 0x80 + +/* Processor Device Notification Values */ +#define NOTIFY_CPU_PPCCHG 0x80 +#define NOTIFY_CPU_CSTATECHG 0x81 +#define NOTIFY_CPU_THROTLCHG 0x82 + +/* User Presence Device Notification Values */ +#define NOTIFY_USR_PRESNCECHG 0x80 + +/* Battery Device Notification Values */ +#define NOTIFY_ALS_ILLUMCHG 0x80 +#define NOTIFY_ALS_COLORTMPCHG 0x81 +#define NOTIFY_ALS_RESPCHG 0x82 + + diff --git a/src/mainboard/technexion/tim8690/acpi/usb.asl b/src/mainboard/technexion/tim8690/acpi/usb.asl new file mode 100644 index 0000000000..3fc9fc58fe --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi/usb.asl @@ -0,0 +1,161 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* simple name description */ +/* +DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001 + ) + { + Include ("usb.asl") + } +*/ +Method(UCOC, 0) { + Sleep(20) + Store(0x13,CMTI) + Store(0,GPSL) +} + +/* USB Port 0 overcurrent uses Gpm 0 */ +If(LLessEqual(UOM0,9)) { + Scope (\_GPE) { + Method (_L13) { + UCOC() + if(LEqual(GPB0,PLC0)) { + Not(PLC0,PLC0) + Store(PLC0, \_SB.PT0D) + } + } + } +} + +/* USB Port 1 overcurrent uses Gpm 1 */ +If (LLessEqual(UOM1,9)) { + Scope (\_GPE) { + Method (_L14) { + UCOC() + if (LEqual(GPB1,PLC1)) { + Not(PLC1,PLC1) + Store(PLC1, \_SB.PT1D) + } + } + } +} + +/* USB Port 2 overcurrent uses Gpm 2 */ +If (LLessEqual(UOM2,9)) { + Scope (\_GPE) { + Method (_L15) { + UCOC() + if (LEqual(GPB2,PLC2)) { + Not(PLC2,PLC2) + Store(PLC2, \_SB.PT2D) + } + } + } +} + +/* USB Port 3 overcurrent uses Gpm 3 */ +If (LLessEqual(UOM3,9)) { + Scope (\_GPE) { + Method (_L16) { + UCOC() + if (LEqual(GPB3,PLC3)) { + Not(PLC3,PLC3) + Store(PLC3, \_SB.PT3D) + } + } + } +} + +/* USB Port 4 overcurrent uses Gpm 4 */ +If (LLessEqual(UOM4,9)) { + Scope (\_GPE) { + Method (_L19) { + UCOC() + if (LEqual(GPB4,PLC4)) { + Not(PLC4,PLC4) + Store(PLC4, \_SB.PT4D) + } + } + } +} + +/* USB Port 5 overcurrent uses Gpm 5 */ +If (LLessEqual(UOM5,9)) { + Scope (\_GPE) { + Method (_L1A) { + UCOC() + if (LEqual(GPB5,PLC5)) { + Not(PLC5,PLC5) + Store(PLC5, \_SB.PT5D) + } + } + } +} + +/* USB Port 6 overcurrent uses Gpm 6 */ +If (LLessEqual(UOM6,9)) { + Scope (\_GPE) { + /* Method (_L1C) { */ + Method (_L06) { + UCOC() + if (LEqual(GPB6,PLC6)) { + Not(PLC6,PLC6) + Store(PLC6, \_SB.PT6D) + } + } + } +} + +/* USB Port 7 overcurrent uses Gpm 7 */ +If (LLessEqual(UOM7,9)) { + Scope (\_GPE) { + /* Method (_L1D) { */ + Method (_L07) { + UCOC() + if (LEqual(GPB7,PLC7)) { + Not(PLC7,PLC7) + Store(PLC7, \_SB.PT7D) + } + } + } +} + +/* USB Port 8 overcurrent uses Gpm 8 */ +If (LLessEqual(UOM8,9)) { + Scope (\_GPE) { + Method (_L17) { + if (LEqual(G8IS,PLC8)) { + Not(PLC8,PLC8) + Store(PLC8, \_SB.PT8D) + } + } + } +} + +/* USB Port 9 overcurrent uses Gpm 9 */ +If (LLessEqual(UOM9,9)) { + Scope (\_GPE) { + Method (_L0E) { + if (LEqual(G9IS,0)) { + Store(1,\_SB.PT9D) + } + } + } +} diff --git a/src/mainboard/technexion/tim8690/acpi_tables.c b/src/mainboard/technexion/tim8690/acpi_tables.c new file mode 100644 index 0000000000..9aaede4b8d --- /dev/null +++ b/src/mainboard/technexion/tim8690/acpi_tables.c @@ -0,0 +1,291 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <string.h> +#include <arch/acpi.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <cpu/amd/amdk8_sysconf.h> +#include <../../../northbridge/amd/amdk8/amdk8_acpi.h> +#include <arch/cpu.h> +#include <cpu/amd/model_fxx_powernow.h> + +extern u16 pm_base; + +#define DUMP_ACPI_TABLES 0 + +/* +* Assume the max pstate number is 8 +* 0x21(33 bytes) is one package length of _PSS package +*/ + +#define Maxpstate 8 +#define Defpkglength 0x21 + +#if DUMP_ACPI_TABLES == 1 +static void dump_mem(u32 start, u32 end) +{ + + u32 i; + print_debug("dump_mem:"); + for (i = start; i < end; i++) { + if ((i & 0xf) == 0) { + printk_debug("\n%08x:", i); + } + printk_debug(" %02x", (u8)*((u8 *)i)); + } + print_debug("\n"); +} +#endif + +extern u8 AmlCode[]; + +#if ACPI_SSDTX_NUM >= 1 +extern u8 AmlCode_ssdt2[]; +extern u8 AmlCode_ssdt3[]; +extern u8 AmlCode_ssdt4[]; +extern u8 AmlCode_ssdt5[]; +#endif + +#define IO_APIC_ADDR 0xfec00000UL + +unsigned long acpi_fill_mcfg(unsigned long current) +{ + /* Just a dummy */ + return current; +} + +unsigned long acpi_fill_madt(unsigned long current) +{ + /* create all subtables for processors */ + current = acpi_create_madt_lapics(current); + + /* Write SB600 IOAPIC, only one */ + current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, + IO_APIC_ADDR, 0); + + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 0, 2, 0); + current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) + current, 0, 9, 9, 0xF); + /* 0: mean bus 0--->ISA */ + /* 0: PIC 0 */ + /* 2: APIC 2 */ + /* 5 mean: 0101 --> Edige-triggered, Active high */ + + /* create all subtables for processors */ + /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */ + /* 1: LINT1 connect to NMI */ + + return current; +} + +extern void get_bus_conf(void); + +void update_ssdtx(void *ssdtx, int i) +{ + uint8_t *PCI; + uint8_t *HCIN; + uint8_t *UID; + + PCI = ssdtx + 0x32; + HCIN = ssdtx + 0x39; + UID = ssdtx + 0x40; + + if (i < 7) { + *PCI = (uint8_t) ('4' + i - 1); + } else { + *PCI = (uint8_t) ('A' + i - 1 - 6); + } + *HCIN = (uint8_t) i; + *UID = (uint8_t) (i + 3); + + /* FIXME: need to update the GSI id in the ssdtx too */ + +} + +unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) { + k8acpi_write_vars(); + amd_model_fxx_generate_powernow(pm_base + 8, 6, 1); + return (unsigned long) (acpigen_get_current()); +} + +unsigned long write_acpi_tables(unsigned long start) +{ + unsigned long current; + acpi_rsdp_t *rsdp; + acpi_rsdt_t *rsdt; + acpi_hpet_t *hpet; + acpi_madt_t *madt; + acpi_fadt_t *fadt; + acpi_facs_t *facs; + acpi_header_t *dsdt; + acpi_header_t *ssdt; + + get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ + + /* Align ACPI tables to 16byte */ + start = (start + 0x0f) & -0x10; + current = start; + + printk_info("ACPI: Writing ACPI tables at %lx...\n", start); + + /* We need at least an RSDP and an RSDT Table */ + rsdp = (acpi_rsdp_t *) current; + current += sizeof(acpi_rsdp_t); + rsdt = (acpi_rsdt_t *) current; + current += sizeof(acpi_rsdt_t); + + /* clear all table memory */ + memset((void *)start, 0, current - start); + + acpi_write_rsdp(rsdp, rsdt); + acpi_write_rsdt(rsdt); + + /* + * We explicitly add these tables later on: + */ + /* If we want to use HPET Timers Linux wants an MADT */ + printk_debug("ACPI: * HPET\n"); + hpet = (acpi_hpet_t *) current; + current += sizeof(acpi_hpet_t); + acpi_create_hpet(hpet); + acpi_add_table(rsdt, hpet); + + printk_debug("ACPI: * MADT\n"); + madt = (acpi_madt_t *) current; + acpi_create_madt(madt); + current += madt->header.length; + acpi_add_table(rsdt, madt); + +#if 0 + /* SRAT */ + printk_debug("ACPI: * SRAT\n"); + srat = (acpi_srat_t *) current; + acpi_create_srat(srat); + current += srat->header.length; + acpi_add_table(rsdt, srat); + + /* SLIT */ + printk_debug("ACPI: * SLIT\n"); + slit = (acpi_slit_t *) current; + acpi_create_slit(slit); + current += slit->header.length; + acpi_add_table(rsdt, slit); +#endif + + /* SSDT */ + printk_debug("ACPI: * SSDT\n"); + ssdt = (acpi_header_t *)current; + + acpi_create_ssdt_generator(ssdt, "DYNADATA"); + current += ssdt->length; + acpi_add_table(rsdt, ssdt); + +#if ACPI_SSDTX_NUM >= 1 + + /* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */ + + for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */ + if ((sysconf.pci1234[i] & 1) != 1) + continue; + uint8_t c; + if (i < 7) { + c = (uint8_t) ('4' + i - 1); + } else { + c = (uint8_t) ('A' + i - 1 - 6); + } + printk_debug("ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */ + current = (current + 0x07) & -0x08; + ssdtx = (acpi_header_t *) current; + switch (sysconf.hcid[i]) { + case 1: /* 8132 */ + p = AmlCode_ssdt2; + break; + case 2: /* 8151 */ + p = AmlCode_ssdt3; + break; + case 3: /* 8131 */ + p = AmlCode_ssdt4; + break; + default: + /* HTX no io apic */ + p = AmlCode_ssdt5; + break; + } + current += ((acpi_header_t *) p)->length; + memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *) p)->length); + update_ssdtx((void *)ssdtx, i); + ssdtx->checksum = 0; + ssdtx->checksum = + acpi_checksum((u8 *)ssdtx, ssdtx->length); + acpi_add_table(rsdt, ssdtx); + } +#endif + + /* FACS */ + printk_debug("ACPI: * FACS\n"); + facs = (acpi_facs_t *) current; + current += sizeof(acpi_facs_t); + acpi_create_facs(facs); + + /* DSDT */ + printk_debug("ACPI: * DSDT\n"); + dsdt = (acpi_header_t *) current; + memcpy((void *)dsdt, (void *)AmlCode, + ((acpi_header_t *) AmlCode)->length); + current += dsdt->length; + printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length); + /* FADT */ + printk_debug("ACPI: * FADT\n"); + fadt = (acpi_fadt_t *) current; + current += sizeof(acpi_fadt_t); + + acpi_create_fadt(fadt, facs, dsdt); + acpi_add_table(rsdt, fadt); + +#if DUMP_ACPI_TABLES == 1 + printk_debug("rsdp\n"); + dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t)); + + printk_debug("rsdt\n"); + dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t)); + + printk_debug("madt\n"); + dump_mem(madt, ((void *)madt) + madt->header.length); + + printk_debug("srat\n"); + dump_mem(srat, ((void *)srat) + srat->header.length); + + printk_debug("slit\n"); + dump_mem(slit, ((void *)slit) + slit->header.length); + + printk_debug("ssdt\n"); + dump_mem(ssdt, ((void *)ssdt) + ssdt->length); + + printk_debug("fadt\n"); + dump_mem(fadt, ((void *)fadt) + fadt->header.length); +#endif + + printk_info("ACPI: done.\n"); + return current; +} diff --git a/src/mainboard/technexion/tim8690/cache_as_ram_auto.c b/src/mainboard/technexion/tim8690/cache_as_ram_auto.c new file mode 100644 index 0000000000..6bb82f0bfd --- /dev/null +++ b/src/mainboard/technexion/tim8690/cache_as_ram_auto.c @@ -0,0 +1,246 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 +#define K8_SET_FIDVID 1 +#define QRANK_DIMM_SUPPORT 1 +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#endif + +#define RC0 (6<<8) +#define RC1 (7<<8) + +#define DIMM0 0x50 +#define DIMM1 0x51 + +#define ICS951462_ADDRESS 0x69 +#define SMBUS_HUB 0x71 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" + +#define post_code(x) outb(x, 0x80) + +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/ite/it8712f/it8712f_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#include "southbridge/amd/rs690/rs690_early_setup.c" +#include "southbridge/amd/sb600/sb600_early_setup.c" + +/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/ +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +/* called in raminit_f.c */ +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ +} + +/*called in raminit_f.c */ +static inline int spd_read_byte(u32 device, u32 address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8.h" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" +#include "resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + +#include "cpu/amd/model_fxx/fidvid.c" + +#if USE_FALLBACK_IMAGE == 1 + +#include "northbridge/amd/amdk8/early_ht.c" + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + /* Is this a cpu only reset? Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal()) { /* RTC already inited */ + goto normal_image; + } else { + goto fallback_image; + } + } + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* sb600_lpc_port80(); */ + sb600_pci_port80(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } else { + goto fallback_image; + } +normal_image: + post_code(0x23); + __asm__ volatile ("jmp __normal_image": /* outputs */ + :"a" (bist), "b"(cpu_init_detectedx) /* inputs */); + +fallback_image: + post_code(0x25); +} +#endif /* USE_FALLBACK_IMAGE == 1 */ + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#endif + real_main(bist, cpu_init_detectedx); +} + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; + int needs_reset = 0; + u32 bsp_apicid = 0; + msr_t msr; + struct cpuid_result cpuid1; + struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } + + enable_rs690_dev8(); + sb600_lpc_init(); + + /* it8712f_enable_serial does not use its 1st parameter. */ + it8712f_enable_serial(0, TTYS0_BASE); + it8712f_kill_watchdog(); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + printk_debug("bsp_apicid=0x%x\n", bsp_apicid); + + setup_tim8690_resource_map(); + + setup_coherent_ht_domain(); + +#if CONFIG_LOGICAL_CPUS==1 + /* It is said that we should start core1 after all core0 launched */ + wait_all_core0_started(); + start_other_cores(); +#endif + wait_all_aps_started(bsp_apicid); + + ht_setup_chains_x(sysinfo); + + /* run _early_setup before soft-reset. */ + rs690_early_setup(); + sb600_early_setup(); + + /* Check to see if processor is capable of changing FIDVID */ + /* otherwise it will throw a GP# when reading FIDVID_STATUS */ + cpuid1 = cpuid(0x80000007); + if( (cpuid1.edx & 0x6) == 0x6 ) { + + /* Read FIDVID_STATUS */ + msr=rdmsr(0xc0010042); + printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + /* show final fid and vid */ + msr=rdmsr(0xc0010042); + printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); + + } else { + printk_debug("Changing FIDVID not supported\n"); + } + + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + rs690_htinit(); + printk_debug("needs_reset=0x%x\n", needs_reset); + + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl now; */ + printk_debug("sysinfo->nodes: %2x sysinfo->ctrl: %2x spd_addr: %2x\n", + sysinfo->nodes, sysinfo->ctrl, spd_addr); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + rs690_before_pci_init(); + sb600_before_pci_init(); + + post_cache_as_ram(); +} diff --git a/src/mainboard/technexion/tim8690/chip.h b/src/mainboard/technexion/tim8690/chip.h new file mode 100644 index 0000000000..bda7abcf29 --- /dev/null +++ b/src/mainboard/technexion/tim8690/chip.h @@ -0,0 +1,26 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_ops; + +struct mainboard_config +{ + u32 uma_size; /* How many UMA should be used in memory for TOP. */ +}; + diff --git a/src/mainboard/technexion/tim8690/cmos.layout b/src/mainboard/technexion/tim8690/cmos.layout new file mode 100644 index 0000000000..d9533989fb --- /dev/null +++ b/src/mainboard/technexion/tim8690/cmos.layout @@ -0,0 +1,119 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2008 Advanced Micro Devices, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## +## +## + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/technexion/tim8690/fadt.c b/src/mainboard/technexion/tim8690/fadt.c new file mode 100644 index 0000000000..e7bc017bbd --- /dev/null +++ b/src/mainboard/technexion/tim8690/fadt.c @@ -0,0 +1,201 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * ACPI - create the Fixed ACPI Description Tables (FADT) + */ + +#include <string.h> +#include <console/console.h> +#include <arch/acpi.h> +#include <arch/io.h> +#include <device/device.h> +#include <../southbridge/amd/sb600/sb600.h> + +/*extern*/ u16 pm_base = 0x800; +/* pm_base should be set in sb acpi */ +/* pm_base should be got from bar2 of rs690. Here I compact ACPI + * registers into 32 bytes limit. + * */ + +#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ +#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ +#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ +#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ +#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ +#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ + +void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) +{ + acpi_header_t *header = &(fadt->header); + + pm_base &= 0xFFFF; + printk_debug("pm_base: 0x%04x\n", pm_base); + + /* Prepare the header */ + memset((void *)fadt, 0, sizeof(acpi_fadt_t)); + memcpy(header->signature, "FACP", 4); + header->length = 244; + header->revision = 1; + memcpy(header->oem_id, OEM_ID, 6); + memcpy(header->oem_table_id, "COREBOOT", 8); + memcpy(header->asl_compiler_id, ASLC, 4); + header->asl_compiler_revision = 0; + + fadt->firmware_ctrl = (u32) facs; + fadt->dsdt = (u32) dsdt; + /* 3=Workstation,4=Enterprise Server, 7=Performance Server */ + fadt->preferred_pm_profile = 0x03; + fadt->sci_int = 9; + /* disable system management mode by setting to 0: */ + fadt->smi_cmd = 0; + fadt->acpi_enable = 0xf0; + fadt->acpi_disable = 0xf1; + fadt->s4bios_req = 0x0; + fadt->pstate_cnt = 0xe2; + + pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); + pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); + pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); + pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); + pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); + pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); + pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); + pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); + + /* CpuControl is in \_PR.CPU0, 6 bytes */ + pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); + pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); + + pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ + pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ + + pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); + pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); + + pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses + * the contents of the PM registers at + * index 20-2B to decode ACPI I/O address. + * AcpiSmiEn & SmiCmdEn*/ + pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ + outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ + + fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; + fadt->pm1b_evt_blk = 0x0000; + fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; + fadt->pm1b_cnt_blk = 0x0000; + fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; + fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; + fadt->gpe0_blk = ACPI_GPE0_BLK; + fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ + + fadt->pm1_evt_len = 4; + fadt->pm1_cnt_len = 2; + fadt->pm2_cnt_len = 1; + fadt->pm_tmr_len = 4; + fadt->gpe0_blk_len = 8; + fadt->gpe1_blk_len = 0; + fadt->gpe1_base = 0; + + fadt->cst_cnt = 0xe3; + fadt->p_lvl2_lat = 101; + fadt->p_lvl3_lat = 1001; + fadt->flush_size = 0; + fadt->flush_stride = 0; + fadt->duty_offset = 1; + fadt->duty_width = 3; + fadt->day_alrm = 0; /* 0x7d these have to be */ + fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ + fadt->century = 0; /* 0x7f to make rtc alrm work */ + fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ + fadt->flags = 0x0001c1a5;/* 0x25; */ + + fadt->res2 = 0; + + fadt->reset_reg.space_id = 1; + fadt->reset_reg.bit_width = 8; + fadt->reset_reg.bit_offset = 0; + fadt->reset_reg.resv = 0; + fadt->reset_reg.addrl = 0xcf9; + fadt->reset_reg.addrh = 0x0; + + fadt->reset_value = 6; + fadt->x_firmware_ctl_l = (u32) facs; + fadt->x_firmware_ctl_h = 0; + fadt->x_dsdt_l = (u32) dsdt; + fadt->x_dsdt_h = 0; + + fadt->x_pm1a_evt_blk.space_id = 1; + fadt->x_pm1a_evt_blk.bit_width = 32; + fadt->x_pm1a_evt_blk.bit_offset = 0; + fadt->x_pm1a_evt_blk.resv = 0; + fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; + fadt->x_pm1a_evt_blk.addrh = 0x0; + + fadt->x_pm1b_evt_blk.space_id = 1; + fadt->x_pm1b_evt_blk.bit_width = 4; + fadt->x_pm1b_evt_blk.bit_offset = 0; + fadt->x_pm1b_evt_blk.resv = 0; + fadt->x_pm1b_evt_blk.addrl = 0x0; + fadt->x_pm1b_evt_blk.addrh = 0x0; + + fadt->x_pm1a_cnt_blk.space_id = 1; + fadt->x_pm1a_cnt_blk.bit_width = 16; + fadt->x_pm1a_cnt_blk.bit_offset = 0; + fadt->x_pm1a_cnt_blk.resv = 0; + fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; + fadt->x_pm1a_cnt_blk.addrh = 0x0; + + fadt->x_pm1b_cnt_blk.space_id = 1; + fadt->x_pm1b_cnt_blk.bit_width = 2; + fadt->x_pm1b_cnt_blk.bit_offset = 0; + fadt->x_pm1b_cnt_blk.resv = 0; + fadt->x_pm1b_cnt_blk.addrl = 0x0; + fadt->x_pm1b_cnt_blk.addrh = 0x0; + + fadt->x_pm2_cnt_blk.space_id = 1; + fadt->x_pm2_cnt_blk.bit_width = 0; + fadt->x_pm2_cnt_blk.bit_offset = 0; + fadt->x_pm2_cnt_blk.resv = 0; + fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; + fadt->x_pm2_cnt_blk.addrh = 0x0; + + fadt->x_pm_tmr_blk.space_id = 1; + fadt->x_pm_tmr_blk.bit_width = 32; + fadt->x_pm_tmr_blk.bit_offset = 0; + fadt->x_pm_tmr_blk.resv = 0; + fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; + fadt->x_pm_tmr_blk.addrh = 0x0; + + fadt->x_gpe0_blk.space_id = 1; + fadt->x_gpe0_blk.bit_width = 32; + fadt->x_gpe0_blk.bit_offset = 0; + fadt->x_gpe0_blk.resv = 0; + fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; + fadt->x_gpe0_blk.addrh = 0x0; + + fadt->x_gpe1_blk.space_id = 1; + fadt->x_gpe1_blk.bit_width = 0; + fadt->x_gpe1_blk.bit_offset = 0; + fadt->x_gpe1_blk.resv = 0; + fadt->x_gpe1_blk.addrl = 0; + fadt->x_gpe1_blk.addrh = 0x0; + + header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); +} diff --git a/src/mainboard/technexion/tim8690/get_bus_conf.c b/src/mainboard/technexion/tim8690/get_bus_conf.c new file mode 100644 index 0000000000..90c98a3ac7 --- /dev/null +++ b/src/mainboard/technexion/tim8690/get_bus_conf.c @@ -0,0 +1,137 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#include <stdlib.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts and these will be shared by irqtable mptable +* and acpi_tables busnum is default. +*/ +u8 bus_isa; +u8 bus_rs690[8]; +u8 bus_sb600[2]; +u32 apicid_sb600; + +/* +* Here you only need to set value in pci1234 for HT-IO that could be installed or not +* You may need to preset pci1234 for HTIO board, +* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail +*/ +u32 pci1234x[] = { + 0x0000ff0, +}; + +/* +* HT Chain device num, actually it is unit id base of every ht device in chain, +* assume every chain only have 4 ht device at most +*/ +u32 hcdnx[] = { + 0x20202020, +}; + +u32 bus_type[256]; + +u32 sbdn_rs690; +u32 sbdn_sb600; + +extern void get_sblk_pci1234(void); + +static u32 get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + u32 apicid_base; + device_t dev; + int i, j; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + get_bus_conf_done = 1; + + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); + sbdn_rs690 = sysconf.sbdn; + sbdn_sb600 = 0; + + for (i = 0; i < 2; i++) { + bus_sb600[i] = 0; + } + for (i = 0; i < 8; i++) { + bus_rs690[i] = 0; + } + + for (i = 0; i < 256; i++) { + bus_type[i] = 0; /* default ISA bus. */ + } + + bus_type[0] = 1; /* pci */ + + bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb600[0] = bus_rs690[0]; + + bus_type[bus_rs690[0]] = 1; + + /* sb600 */ + dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); + if (dev) { + bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_sb600[1]; j < bus_isa; j++) + bus_type[j] = 1; + } + + /* rs690 */ + for (i = 1; i < 8; i++) { + dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); + if (dev) { + bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + if(255 != bus_rs690[i]) { + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + bus_type[bus_rs690[i]] = 1; /* PCI bus. */ + } + } + } + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_sb600 = apicid_base + 0; +} diff --git a/src/mainboard/technexion/tim8690/irq_tables.c b/src/mainboard/technexion/tim8690/irq_tables.c new file mode 100644 index 0000000000..38479aac14 --- /dev/null +++ b/src/mainboard/technexion/tim8690/irq_tables.c @@ -0,0 +1,119 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +#include <cpu/amd/amdk8_sysconf.h> + +extern void get_bus_conf(void); + +static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, + u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, + u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, + u8 slot, u8 rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} +extern u8 bus_isa; +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; +extern unsigned long sbdn_sb600; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + u32 slot_num; + u8 *v; + + u8 sum = 0; + int i; + + get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%lx...", addr); + + pirq = (void *)(addr); + v = (u8 *) (addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_sb600[0]; + pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x1002; + pirq->rtr_device = 0x4384; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* pci bridge */ + write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, + 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, + 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("write_pirq_routing_table done.\n"); + + return (unsigned long)pirq_info; +} diff --git a/src/mainboard/technexion/tim8690/mainboard.c b/src/mainboard/technexion/tim8690/mainboard.c new file mode 100644 index 0000000000..5602998425 --- /dev/null +++ b/src/mainboard/technexion/tim8690/mainboard.c @@ -0,0 +1,227 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <arch/io.h> +#include <boot/coreboot_tables.h> +#include <cpu/x86/msr.h> +#include <cpu/amd/mtrr.h> +#include <device/pci_def.h> +#include <../southbridge/amd/sb600/sb600.h> +#include "chip.h" + +#define ADT7461_ADDRESS 0x4C +#define ARA_ADDRESS 0x0C /* Alert Response Address */ +#define SMBUS_IO_BASE 0x1000 + +extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, + u8 val); +extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, + uint64_t start, uint64_t size); +#define ADT7461_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address) +#define ARA_read_byte(address) \ + do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address) +#define ADT7461_write_byte(address, val) \ + do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val) + +uint64_t uma_memory_base, uma_memory_size; + + + +/*************************************************** +* This board, the TIM-8690 has two Marvel 88e5056 PCI-E +* 10/100/1000 chips on board. +* Both of their pin PERSTn pins are connected to GPIO 5 of the +* SB600 southbridge. +****************************************************/ +static void enable_onboard_nic() +{ + + u8 byte; + device_t sm_dev; + struct bus pbus; + + + printk_info("enable_onboard_nic.\n"); + + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + byte= pci_cf8_conf1.read8(&pbus, sm_dev->bus->secondary, sm_dev->path.pci.devfn, 0x9a); + byte |= ( 1 << 7); + pci_cf8_conf1.write8(&pbus, sm_dev->bus->secondary, sm_dev->path.pci.devfn, 0x9a,byte); + + + byte=pm_ioread(0x59); + byte &= ~( 1<< 5); + pm_iowrite(0x59,byte); + + + byte = pci_cf8_conf1.read8(&pbus, sm_dev->bus->secondary, sm_dev->path.pci.devfn, 0xA8); + + byte |= (1 << 1); //set bit 1 to high + pci_cf8_conf1.write8(&pbus, sm_dev->bus->secondary, sm_dev->path.pci.devfn, 0xA8, byte); +} + +/* set thermal config + */ +static void set_thermal_config() +{ + u8 byte; + u16 word; + device_t sm_dev; + struct bus pbus; + + /* set ADT 7461 */ + ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */ + ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */ + ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */ + ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */ + + ADT7461_write_byte(0x19, 0x55); /* External THERM limit */ + ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */ + + byte = ADT7461_read_byte(0x02); /* read status register to clear it */ + ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */ + printk_info("Init adt7461 end , status 0x02 %02x\n", byte); + + /* sb600 settings for thermal config */ + /* set SB600 GPIO 64 to GPIO with pull-up */ + byte = pm2_ioread(0x42); + byte &= 0x3f; + pm2_iowrite(0x42, byte); + + /* set GPIO 64 to input */ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + word = + pci_cf8_conf1.read16(&pbus, sm_dev->bus->secondary, + sm_dev->path.pci.devfn, 0x56); + word |= 1 << 7; + pci_cf8_conf1.write16(&pbus, sm_dev->bus->secondary, + sm_dev->path.pci.devfn, 0x56, word); + + /* set GPIO 64 internal pull-up */ + byte = pm2_ioread(0xf0); + byte &= 0xee; + pm2_iowrite(0xf0, byte); + + /* set Talert to be active low */ + byte = pm_ioread(0x67); + byte &= ~(1 << 5); + pm_iowrite(0x67, byte); + + /* set Talert to generate ACPI event */ + byte = pm_ioread(0x3c); + byte &= 0xf3; + pm_iowrite(0x3c, byte); + + /* THERMTRIP pin */ + /* byte = pm_ioread(0x68); + * byte |= 1 << 3; + * pm_iowrite(0x68, byte); + * + * byte = pm_ioread(0x55); + * byte |= 1 << 0; + * pm_iowrite(0x55, byte); + * + * byte = pm_ioread(0x67); + * byte &= ~( 1 << 6); + * pm_iowrite(0x67, byte); + */ +} + +/************************************************* +* enable the dedicated function in tim8690 board. +* This function called early than rs690_enable. +*************************************************/ +void tim8690_enable(device_t dev) +{ + struct mainboard_config *mainboard = + (struct mainboard_config *)dev->chip_info; + + printk_info("Mainboard tim8690 Enable. dev=0x%p\n", dev); + +#if (CONFIG_GFXUMA == 1) + msr_t msr, msr2; + + /* TOP_MEM: the top of DRAM below 4G */ + msr = rdmsr(TOP_MEM); + printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", + __func__, msr.lo, msr.hi); + + /* TOP_MEM2: the top of DRAM above 4G */ + msr2 = rdmsr(TOP_MEM2); + printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", + __func__, msr2.lo, msr2.hi); + + switch (msr.lo) { + case 0x10000000: /* 256M system memory */ + uma_memory_size = 0x2000000; /* 32M recommended UMA */ + break; + + case 0x18000000: /* 384M system memory */ + uma_memory_size = 0x4000000; /* 64M recommended UMA */ + break; + + case 0x20000000: /* 512M system memory */ + uma_memory_size = 0x4000000; /* 64M recommended UMA */ + break; + + default: /* 1GB and above system memory */ + uma_memory_size = 0x8000000; /* 128M recommended UMA */ + break; + } + + uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ + printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n", + __func__, uma_memory_size, uma_memory_base); + + /* TODO: TOP_MEM2 */ +#else + uma_memory_size = 0x8000000; /* 128M recommended UMA */ + uma_memory_base = 0x38000000; /* 1GB system memory supposed */ +#endif + + enable_onboard_nic(); + set_thermal_config(); +} + +int add_mainboard_resources(struct lb_memory *mem) +{ + /* UMA is removed from system memory in the northbridge code, but + * in some circumstances we want the memory mentioned as reserved. + */ +#if (CONFIG_GFXUMA == 1) + printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n", + uma_memory_base, uma_memory_size); + lb_add_memory_range(mem, LB_MEM_RESERVED, + uma_memory_base, uma_memory_size); +#endif +} + +/* +* CONFIG_CHIP_NAME defined in Option.lb. +*/ +struct chip_operations mainboard_ops = { + CHIP_NAME("TechNexion TIM-8690 Mainboard") + .enable_dev = tim8690_enable, +}; diff --git a/src/mainboard/technexion/tim8690/mptable.c b/src/mainboard/technexion/tim8690/mptable.c new file mode 100644 index 0000000000..9a953ef90d --- /dev/null +++ b/src/mainboard/technexion/tim8690/mptable.c @@ -0,0 +1,212 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <arch/io.h> +#include <string.h> +#include <stdint.h> + +#include <cpu/amd/amdk8_sysconf.h> + +extern u8 bus_isa; +extern u8 bus_rs690[8]; +extern u8 bus_sb600[2]; + +extern u32 apicid_sb600; + +extern u32 bus_type[256]; +extern u32 sbdn_rs690; +extern u32 sbdn_sb600; + +extern void get_bus_conf(void); + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "ATI "; + static const char productid[12] = "TIM8690 "; + struct mp_config_table *mc; + int j; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + + /* Bus: Bus ID Type */ + /* define bus and isa numbers */ + for (j = 0; j < bus_isa; j++) { + smp_write_bus(mc, j, (char *)"PCI "); + } + smp_write_bus(mc, bus_isa, (char *)"ISA "); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + u32 dword; + u8 byte; + + dev = + dev_find_slot(bus_sb600[0], + PCI_DEVFN(sbdn_sb600 + 0x14, 0)); + if (dev) { + dword = pci_read_config32(dev, 0x74) & 0xfffffff0; + smp_write_ioapic(mc, apicid_sb600, 0x11, dword); + + /* Initialize interrupt mapping */ + /* aza */ + byte = pci_read_config8(dev, 0x63); + byte &= 0xf8; + byte |= 0; /* 0: INTA, ...., 7: INTH */ + pci_write_config8(dev, 0x63, byte); + + /* SATA */ + dword = pci_read_config32(dev, 0xac); + dword &= ~(7 << 26); + dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */ + /* dword |= 1<<22; PIC and APIC co exists */ + pci_write_config32(dev, 0xac, dword); + + /* + * 00:12.0: PROG SATA : INT F + * 00:13.0: INTA USB_0 + * 00:13.1: INTB USB_1 + * 00:13.2: INTC USB_2 + * 00:13.3: INTD USB_3 + * 00:13.4: INTC USB_4 + * 00:13.5: INTD USB2 + * 00:14.1: INTA IDE + * 00:14.2: Prog HDA : INT E + * 00:14.5: INTB ACI + * 00:14.6: INTB MCI + */ + } + } + + /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ +#define IO_LOCAL_INT(type, intr, apicid, pin) \ + smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin)); + + IO_LOCAL_INT(mp_ExtINT, 0x0, apicid_sb600, 0x0); + + /* ISA ints are edge-triggered, and usually originate from the ISA bus, + * or its remainings. + */ +#define ISA_INT(intr, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, (intr), apicid_sb600, (pin)) + + ISA_INT(0x1, 0x1); + ISA_INT(0x0, 0x2); + ISA_INT(0x3, 0x3); + ISA_INT(0x4, 0x4); + ISA_INT(0x6, 0x6); + ISA_INT(0x7, 0x7); + ISA_INT(0xc, 0xc); + ISA_INT(0xd, 0xd); + ISA_INT(0xe, 0xe); + + /* PCI interrupts are level triggered, and are + * associated with a specific bus/device/function tuple. + */ +#if HAVE_ACPI_TABLES == 0 +#define PCI_INT(bus, dev, fn, pin) \ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) +#else +#define PCI_INT(bus, dev, fn, pin) +#endif + + /* usb */ + PCI_INT(0x0, 0x13, 0x0, 0x10); + PCI_INT(0x0, 0x13, 0x1, 0x11); + PCI_INT(0x0, 0x13, 0x2, 0x12); + PCI_INT(0x0, 0x13, 0x3, 0x13); + + /* sata */ + PCI_INT(0x0, 0x12, 0x0, 0x16); + + /* HD Audio: b0:d20:f1:reg63 should be 0. */ + PCI_INT(0x0, 0x14, 0x0, 0x10); + + /* on board NIC & Slot PCIE. */ + PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12); + PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13); + PCI_INT(bus_rs690[2], 0x0, 0x0, 0x12); + PCI_INT(bus_rs690[3], 0x0, 0x0, 0x13); + PCI_INT(bus_rs690[4], 0x0, 0x0, 0x10); + PCI_INT(bus_rs690[5], 0x0, 0x0, 0x11); + PCI_INT(bus_rs690[6], 0x0, 0x0, 0x12); + PCI_INT(bus_rs690[7], 0x0, 0x0, 0x13); + + /* PCI slots */ + /* PCI_SLOT 0. */ + PCI_INT(bus_sb600[1], 0x5, 0x0, 0x14); + PCI_INT(bus_sb600[1], 0x5, 0x1, 0x15); + PCI_INT(bus_sb600[1], 0x5, 0x2, 0x16); + PCI_INT(bus_sb600[1], 0x5, 0x3, 0x17); + + /* PCI_SLOT 1. */ + PCI_INT(bus_sb600[1], 0x6, 0x0, 0x15); + PCI_INT(bus_sb600[1], 0x6, 0x1, 0x16); + PCI_INT(bus_sb600[1], 0x6, 0x2, 0x17); + PCI_INT(bus_sb600[1], 0x6, 0x3, 0x14); + + /* PCI_SLOT 2. */ + PCI_INT(bus_sb600[1], 0x7, 0x0, 0x16); + PCI_INT(bus_sb600[1], 0x7, 0x1, 0x17); + PCI_INT(bus_sb600[1], 0x7, 0x2, 0x14); + PCI_INT(bus_sb600[1], 0x7, 0x3, 0x15); + + /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); + IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = + smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/technexion/tim8690/resourcemap.c b/src/mainboard/technexion/tim8690/resourcemap.c new file mode 100644 index 0000000000..9eda26bb10 --- /dev/null +++ b/src/mainboard/technexion/tim8690/resourcemap.c @@ -0,0 +1,278 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +static void setup_tim8690_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + }; + + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); +} |