5 files changed, 16 insertions, 15 deletions
diff --git a/src/mainboard/technexion/tim5690/Config.lb b/src/mainboard/technexion/tim5690/Config.lb
index 96fe267d25..3e69acc0ff 100644
--- a/src/mainboard/technexion/tim5690/Config.lb
+++ b/src/mainboard/technexion/tim5690/Config.lb
@@ -33,13 +33,13 @@ driver mainboard.o
 
 #dir /drivers/si/3114
 
-if CONFIG_HAVE_MP_TABLE object mptable.o end
-if CONFIG_HAVE_PIRQ_TABLE
+if CONFIG_GENERATE_MP_TABLE object mptable.o end
+if CONFIG_GENERATE_PIRQ_TABLE
 	object get_bus_conf.o
 	object irq_tables.o
 end
 
-if CONFIG_HAVE_ACPI_TABLES
+if CONFIG_GENERATE_ACPI_TABLES
 	object acpi_tables.o
 	object fadt.o
 	makerule dsdt.c
diff --git a/src/mainboard/technexion/tim5690/Kconfig b/src/mainboard/technexion/tim5690/Kconfig
index 2e4ea5f973..20194a1dbb 100644
--- a/src/mainboard/technexion/tim5690/Kconfig
+++ b/src/mainboard/technexion/tim5690/Kconfig
@@ -9,6 +9,7 @@ config BOARD_TECHNEXION_TIM5690
 	select SOUTHBRIDGE_AMD_SB600
 	select SUPERIO_ITE_IT8712F
 	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
 	select USE_PRINTK_IN_CAR
 	select USE_DCACHE_RAM
 	select HAVE_HARD_RESET
diff --git a/src/mainboard/technexion/tim5690/Makefile.inc b/src/mainboard/technexion/tim5690/Makefile.inc
index 0a2460d166..317f9ca1c5 100644
--- a/src/mainboard/technexion/tim5690/Makefile.inc
+++ b/src/mainboard/technexion/tim5690/Makefile.inc
@@ -23,11 +23,11 @@ driver-y += mainboard.o
 
 # Needed by irq_tables and mptable and acpi_tables.
 obj-y += get_bus_conf.o
-obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o
-obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) += dsdt.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) += acpi_tables.o
-obj-$(CONFIG_HAVE_ACPI_TABLES) += fadt.o
+obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o
+obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += dsdt.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += acpi_tables.o
+obj-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.o
 
 # This is part of the conversion to init-obj and away from included code.
 
diff --git a/src/mainboard/technexion/tim5690/Options.lb b/src/mainboard/technexion/tim5690/Options.lb
index 83174c3867..ad1e80aae5 100644
--- a/src/mainboard/technexion/tim5690/Options.lb
+++ b/src/mainboard/technexion/tim5690/Options.lb
@@ -19,9 +19,9 @@
 ##
 ##
 
-uses CONFIG_HAVE_MP_TABLE
-uses CONFIG_HAVE_PIRQ_TABLE
-uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_GENERATE_MP_TABLE
+uses CONFIG_GENERATE_PIRQ_TABLE
+uses CONFIG_GENERATE_ACPI_TABLES
 uses CONFIG_HAVE_ACPI_RESUME
 uses CONFIG_USE_FALLBACK_IMAGE
 uses CONFIG_HAVE_FALLBACK_BOOT
@@ -119,17 +119,17 @@ default CONFIG_HAVE_HARD_RESET=1
 ##
 ## Build code to export a programmable irq routing table
 ##
-default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_GENERATE_PIRQ_TABLE=1
 default CONFIG_IRQ_SLOT_COUNT=11
 
 ##
 ## Build code to export an x86 MP table
 ## Useful for specifying IRQ routing values
 ##
-default CONFIG_HAVE_MP_TABLE=1
+default CONFIG_GENERATE_MP_TABLE=1
 
 ## ACPI tables will be included
-default CONFIG_HAVE_ACPI_TABLES=1
+default CONFIG_GENERATE_ACPI_TABLES=1
 
 ##
 ## Build code to export a CMOS option table
diff --git a/src/mainboard/technexion/tim5690/mptable.c b/src/mainboard/technexion/tim5690/mptable.c
index 7d7b3440fc..ee4a2ff761 100644
--- a/src/mainboard/technexion/tim5690/mptable.c
+++ b/src/mainboard/technexion/tim5690/mptable.c
@@ -142,7 +142,7 @@ void *smp_write_config_table(void *v)
 	/* PCI interrupts are level triggered, and are
 	 * associated with a specific bus/device/function tuple.
 	 */
-#if CONFIG_HAVE_ACPI_TABLES == 0
+#if CONFIG_GENERATE_ACPI_TABLES == 0
 #define PCI_INT(bus, dev, fn, pin) \
         smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin))
 #else