diff options
Diffstat (limited to 'src/mainboard/supermicro')
27 files changed, 73 insertions, 65 deletions
diff --git a/src/mainboard/supermicro/h8dme/Config.lb b/src/mainboard/supermicro/h8dme/Config.lb index 9c07ae9b6f..330980514e 100644 --- a/src/mainboard/supermicro/h8dme/Config.lb +++ b/src/mainboard/supermicro/h8dme/Config.lb @@ -30,8 +30,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/supermicro/h8dme/Kconfig b/src/mainboard/supermicro/h8dme/Kconfig index e07614b952..ccf07ebfcd 100644 --- a/src/mainboard/supermicro/h8dme/Kconfig +++ b/src/mainboard/supermicro/h8dme/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUPERMICRO_H8DME select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/supermicro/h8dme/Makefile.inc b/src/mainboard/supermicro/h8dme/Makefile.inc index d8864fe1b7..8075ba2a34 100644 --- a/src/mainboard/supermicro/h8dme/Makefile.inc +++ b/src/mainboard/supermicro/h8dme/Makefile.inc @@ -24,8 +24,8 @@ driver-y += ../../../drivers/i2c/i2cmux2/i2cmux2.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/supermicro/h8dme/Options.lb b/src/mainboard/supermicro/h8dme/Options.lb index 8737537318..9f7095c43c 100644 --- a/src/mainboard/supermicro/h8dme/Options.lb +++ b/src/mainboard/supermicro/h8dme/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -153,17 +153,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/h8dmr/Config.lb b/src/mainboard/supermicro/h8dmr/Config.lb index 2aca572d6c..05f4514ed2 100644 --- a/src/mainboard/supermicro/h8dmr/Config.lb +++ b/src/mainboard/supermicro/h8dmr/Config.lb @@ -33,8 +33,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/supermicro/h8dmr/Kconfig b/src/mainboard/supermicro/h8dmr/Kconfig index 4cb20f4c60..3a359af61d 100644 --- a/src/mainboard/supermicro/h8dmr/Kconfig +++ b/src/mainboard/supermicro/h8dmr/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUPERMICRO_H8DMR select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/supermicro/h8dmr/Makefile.inc b/src/mainboard/supermicro/h8dmr/Makefile.inc index 085b7d0df3..8b64208a18 100644 --- a/src/mainboard/supermicro/h8dmr/Makefile.inc +++ b/src/mainboard/supermicro/h8dmr/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/supermicro/h8dmr/Options.lb b/src/mainboard/supermicro/h8dmr/Options.lb index 739fe16905..f95c63c4ba 100644 --- a/src/mainboard/supermicro/h8dmr/Options.lb +++ b/src/mainboard/supermicro/h8dmr/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -146,17 +146,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/h8dmr_fam10/Config.lb b/src/mainboard/supermicro/h8dmr_fam10/Config.lb index c6a8c531bb..d3d8fa83ac 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Config.lb +++ b/src/mainboard/supermicro/h8dmr_fam10/Config.lb @@ -35,8 +35,8 @@ driver mainboard.o #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_fam10/Kconfig index 3d6b375a7c..67ec6824fd 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig +++ b/src/mainboard/supermicro/h8dmr_fam10/Kconfig @@ -8,6 +8,7 @@ config BOARD_SUPERMICRO_H8DMR_FAM10 select SOUTHBRIDGE_NVIDIA_MCP55 select SUPERIO_WINBOND_W83627HF select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE select USE_PRINTK_IN_CAR select USE_DCACHE_RAM select HAVE_HARD_RESET diff --git a/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc b/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc index 085b7d0df3..8b64208a18 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc +++ b/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc @@ -23,8 +23,8 @@ driver-y += mainboard.o # Needed by irq_tables and mptable and acpi_tables. obj-y += get_bus_conf.o -obj-$(CONFIG_HAVE_MP_TABLE) += mptable.o -obj-$(CONFIG_HAVE_PIRQ_TABLE) += irq_tables.o +obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o +obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o # This is part of the conversion to init-obj and away from included code. diff --git a/src/mainboard/supermicro/h8dmr_fam10/Options.lb b/src/mainboard/supermicro/h8dmr_fam10/Options.lb index f7b602af0c..2ad708a813 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/Options.lb +++ b/src/mainboard/supermicro/h8dmr_fam10/Options.lb @@ -19,9 +19,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE -uses CONFIG_HAVE_ACPI_TABLES +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE +uses CONFIG_GENERATE_ACPI_TABLES uses CONFIG_HAVE_ACPI_RESUME uses CONFIG_ACPI_SSDTX_NUM uses CONFIG_USE_FALLBACK_IMAGE @@ -148,17 +148,17 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=11 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ACPI tables will be included -default CONFIG_HAVE_ACPI_TABLES=0 +default CONFIG_GENERATE_ACPI_TABLES=0 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dai_g/Config.lb b/src/mainboard/supermicro/x6dai_g/Config.lb index 3e9a87eb77..2756977d8e 100644 --- a/src/mainboard/supermicro/x6dai_g/Config.lb +++ b/src/mainboard/supermicro/x6dai_g/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dai_g/Kconfig b/src/mainboard/supermicro/x6dai_g/Kconfig index 4c965749eb..c6f73347bf 100644 --- a/src/mainboard/supermicro/x6dai_g/Kconfig +++ b/src/mainboard/supermicro/x6dai_g/Kconfig @@ -5,7 +5,8 @@ config BOARD_SUPERMICRO_X6DAI_G select NORTHBRIDGE_INTEL_E7525 select SOUTHBRIDGE_INTEL_ESB6300 select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dai_g/Options.lb b/src/mainboard/supermicro/x6dai_g/Options.lb index e3c9912495..626f0bebb3 100644 --- a/src/mainboard/supermicro/x6dai_g/Options.lb +++ b/src/mainboard/supermicro/x6dai_g/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhe_g/Config.lb b/src/mainboard/supermicro/x6dhe_g/Config.lb index 2c34ff390d..deaee0416a 100644 --- a/src/mainboard/supermicro/x6dhe_g/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g/Config.lb @@ -17,8 +17,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhe_g/Kconfig b/src/mainboard/supermicro/x6dhe_g/Kconfig index ecbe7d7905..467859a5dc 100644 --- a/src/mainboard/supermicro/x6dhe_g/Kconfig +++ b/src/mainboard/supermicro/x6dhe_g/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHE_G select SOUTHBRIDGE_INTEL_ESB6300 select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhe_g/Options.lb b/src/mainboard/supermicro/x6dhe_g/Options.lb index fcc68a2968..87be848afb 100644 --- a/src/mainboard/supermicro/x6dhe_g/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhe_g2/Config.lb b/src/mainboard/supermicro/x6dhe_g2/Config.lb index 722a02077a..3d7ed96543 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Config.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Config.lb @@ -17,8 +17,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhe_g2/Kconfig b/src/mainboard/supermicro/x6dhe_g2/Kconfig index d0eb1ed260..c651cc0c69 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Kconfig +++ b/src/mainboard/supermicro/x6dhe_g2/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHE_G2 select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_NSC_PC87427 - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhe_g2/Options.lb b/src/mainboard/supermicro/x6dhe_g2/Options.lb index fcc68a2968..87be848afb 100644 --- a/src/mainboard/supermicro/x6dhe_g2/Options.lb +++ b/src/mainboard/supermicro/x6dhe_g2/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhr_ig/Config.lb b/src/mainboard/supermicro/x6dhr_ig/Config.lb index e2d37dc7ca..1dfafd51cb 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhr_ig/Kconfig b/src/mainboard/supermicro/x6dhr_ig/Kconfig index 32a8183d46..c5d6cf3856 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Kconfig +++ b/src/mainboard/supermicro/x6dhr_ig/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHR_IG select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhr_ig/Options.lb b/src/mainboard/supermicro/x6dhr_ig/Options.lb index 2698b3b418..d8b836bfc4 100644 --- a/src/mainboard/supermicro/x6dhr_ig/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table diff --git a/src/mainboard/supermicro/x6dhr_ig2/Config.lb b/src/mainboard/supermicro/x6dhr_ig2/Config.lb index 566b776c15..09147e4c8f 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Config.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Config.lb @@ -18,8 +18,8 @@ arch i386 end ## driver mainboard.o -if CONFIG_HAVE_MP_TABLE object mptable.o end -if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_GENERATE_MP_TABLE object mptable.o end +if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end object reset.o ## diff --git a/src/mainboard/supermicro/x6dhr_ig2/Kconfig b/src/mainboard/supermicro/x6dhr_ig2/Kconfig index eee564050e..8d88331cdc 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Kconfig +++ b/src/mainboard/supermicro/x6dhr_ig2/Kconfig @@ -6,7 +6,8 @@ config BOARD_SUPERMICRO_X6DHR_IG2 select SOUTHBRIDGE_INTEL_I82801ER select SOUTHBRIDGE_INTEL_PXHD select SUPERIO_WINBOND_W83627HF - select PIRQ_TABLE + select HAVE_PIRQ_TABLE + select HAVE_MP_TABLE config MAINBOARD_DIR string diff --git a/src/mainboard/supermicro/x6dhr_ig2/Options.lb b/src/mainboard/supermicro/x6dhr_ig2/Options.lb index 2698b3b418..d8b836bfc4 100644 --- a/src/mainboard/supermicro/x6dhr_ig2/Options.lb +++ b/src/mainboard/supermicro/x6dhr_ig2/Options.lb @@ -1,5 +1,5 @@ -uses CONFIG_HAVE_MP_TABLE -uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_GENERATE_MP_TABLE +uses CONFIG_GENERATE_PIRQ_TABLE uses CONFIG_USE_FALLBACK_IMAGE uses CONFIG_HAVE_FALLBACK_BOOT uses CONFIG_HAVE_HARD_RESET @@ -80,14 +80,14 @@ default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_GENERATE_PIRQ_TABLE=1 default CONFIG_IRQ_SLOT_COUNT=15 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default CONFIG_HAVE_MP_TABLE=1 +default CONFIG_GENERATE_MP_TABLE=1 ## ## Build code to export a CMOS option table |