diff options
Diffstat (limited to 'src/mainboard/supermicro/x6dai_g')
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/Kconfig | 32 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/board_info.txt | 2 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/cmos.layout | 78 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/debug.c | 262 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/devicetree.cb | 65 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/irq_tables.c | 39 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/mptable.c | 88 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/romstage.c | 98 | ||||
| -rw-r--r-- | src/mainboard/supermicro/x6dai_g/watchdog.c | 41 |
9 files changed, 0 insertions, 705 deletions
diff --git a/src/mainboard/supermicro/x6dai_g/Kconfig b/src/mainboard/supermicro/x6dai_g/Kconfig deleted file mode 100644 index 4999320d68..0000000000 --- a/src/mainboard/supermicro/x6dai_g/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -if BOARD_SUPERMICRO_X6DAI_G - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_MPGA604 - select NORTHBRIDGE_INTEL_E7525 - select SOUTHBRIDGE_INTEL_ESB6300 - select SUPERIO_WINBOND_W83627HF - select ROMCC - select HAVE_HARD_RESET - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_1024 - -config MAINBOARD_DIR - string - default supermicro/x6dai_g - -config MAINBOARD_PART_NUMBER - string - default "X6DAi-G" - -config MAX_CPUS - int - default 4 - -config IRQ_SLOT_COUNT - int - default 15 - -endif # BOARD_SUPERMICRO_X6DAI_G diff --git a/src/mainboard/supermicro/x6dai_g/board_info.txt b/src/mainboard/supermicro/x6dai_g/board_info.txt deleted file mode 100644 index 5d4f089542..0000000000 --- a/src/mainboard/supermicro/x6dai_g/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: server -Board URL: http://www.supermicro.com/products/motherboard/Xeon800/E7525/X6DAi-G.cfm diff --git a/src/mainboard/supermicro/x6dai_g/cmos.layout b/src/mainboard/supermicro/x6dai_g/cmos.layout deleted file mode 100644 index 635555e58c..0000000000 --- a/src/mainboard/supermicro/x6dai_g/cmos.layout +++ /dev/null @@ -1,78 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -395 1 e 2 hyper_threading -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/x6dai_g/debug.c b/src/mainboard/supermicro/x6dai_g/debug.c deleted file mode 100644 index b92a75d76c..0000000000 --- a/src/mainboard/supermicro/x6dai_g/debug.c +++ /dev/null @@ -1,262 +0,0 @@ -#include <spd.h> - -static void print_reg(unsigned char index) -{ - unsigned char data; - - outb(index, 0x2e); - data = inb(0x2f); - print_debug("0x"); - print_debug_hex8(index); - print_debug(": 0x"); - print_debug_hex8(data); - print_debug("\n"); - return; -} - -static void xbus_en(void) -{ - /* select the XBUS function in the SIO */ - outb(0x07, 0x2e); - outb(0x0f, 0x2f); - outb(0x30, 0x2e); - outb(0x01, 0x2f); - return; -} - -static void setup_func(unsigned char func) -{ - /* select the function in the SIO */ - outb(0x07, 0x2e); - outb(func, 0x2f); - /* print out the regs */ - print_reg(0x30); - print_reg(0x60); - print_reg(0x61); - print_reg(0x62); - print_reg(0x63); - print_reg(0x70); - print_reg(0x71); - print_reg(0x74); - print_reg(0x75); - return; -} - -static void siodump(void) -{ - int i; - unsigned char data; - - print_debug("\n*** SERVER I/O REGISTERS ***\n"); - for (i=0x10; i<=0x2d; i++) { - print_reg((unsigned char)i); - } -#if 0 - print_debug("\n*** XBUS REGISTERS ***\n"); - setup_func(0x0f); - for (i=0xf0; i<=0xff; i++) { - print_reg((unsigned char)i); - } - - print_debug("\n*** SERIAL 1 CONFIG REGISTERS ***\n"); - setup_func(0x03); - print_reg(0xf0); - - print_debug("\n*** SERIAL 2 CONFIG REGISTERS ***\n"); - setup_func(0x02); - print_reg(0xf0); - -#endif - print_debug("\n*** GPIO REGISTERS ***\n"); - setup_func(0x07); - for (i=0xf0; i<=0xf8; i++) { - print_reg((unsigned char)i); - } - print_debug("\n*** GPIO VALUES ***\n"); - data = inb(0x68a); - print_debug("\nGPDO 4: 0x"); - print_debug_hex8(data); - data = inb(0x68b); - print_debug("\nGPDI 4: 0x"); - print_debug_hex8(data); - print_debug("\n"); - -#if 0 - - print_debug("\n*** WATCHDOG TIMER REGISTERS ***\n"); - setup_func(0x0a); - print_reg(0xf0); - - print_debug("\n*** FAN CONTROL REGISTERS ***\n"); - setup_func(0x09); - print_reg(0xf0); - print_reg(0xf1); - - print_debug("\n*** RTC REGISTERS ***\n"); - setup_func(0x10); - print_reg(0xf0); - print_reg(0xf1); - print_reg(0xf3); - print_reg(0xf6); - print_reg(0xf7); - print_reg(0xfe); - print_reg(0xff); - - print_debug("\n*** HEALTH MONITORING & CONTROL REGISTERS ***\n"); - setup_func(0x14); - print_reg(0xf0); -#endif - return; -} - -static void dump_bar14(unsigned dev) -{ - int i; - unsigned long bar; - - print_debug("BAR 14 Dump\n"); - - bar = pci_read_config32(dev, 0x14); - for(i = 0; i <= 0x300; i+=4) { -#if 0 - unsigned char val; - if ((i & 0x0f) == 0) { - print_debug_hex8(i); - print_debug_char(':'); - } - val = pci_read_config8(dev, i); -#endif - if((i%4)==0) { - print_debug("\n"); - print_debug_hex16(i); - print_debug_char(' '); - } - print_debug_hex32(read32(bar + i)); - print_debug_char(' '); - } - print_debug("\n"); -} - -#if 0 -static void dump_spd_registers(const struct mem_controller *ctrl) -{ - int i; - print_debug("\n"); - for(i = 0; i < 4; i++) { - unsigned device; - device = ctrl->channel0[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\n"); - } - device = ctrl->channel1[i]; - if (device) { - int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".1: "); - print_debug_hex8(device); - for(j = 0; j < 256; j++) { - int status; - unsigned char byte; - if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); - } - status = smbus_read_byte(device, j); - if (status < 0) { - print_debug("bad device\n"); - break; - } - byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); - } - print_debug("\n"); - } - } -} -#endif - -void dump_spd_registers(void) -{ - unsigned device; - device = DIMM0; - while(device <= DIMM7) { - int status = 0; - int i; - print_debug("\n"); - print_debug("dimm "); - print_debug_hex8(device); - - for(i = 0; (i < 256) ; i++) { - unsigned char byte; - if ((i % 16) == 0) { - print_debug("\n"); - print_debug_hex8(i); - print_debug(": "); - } - status = smbus_read_byte(device, i); - if (status < 0) { - print_debug("bad device: "); - print_debug_hex8(-status); - print_debug("\n"); - break; - } - print_debug_hex8(status); - print_debug_char(' '); - } - device++; - print_debug("\n"); - } -} - -void dump_ipmi_registers(void) -{ - unsigned device; - device = 0x42; - while(device <= 0x42) { - int status = 0; - int i; - print_debug("\n"); - print_debug("ipmi "); - print_debug_hex8(device); - - for(i = 0; (i < 8) ; i++) { - unsigned char byte; - status = smbus_read_byte(device, 2); - if (status < 0) { - print_debug("bad device: "); - print_debug_hex8(-status); - print_debug("\n"); - break; - } - print_debug_hex8(status); - print_debug_char(' '); - } - device++; - print_debug("\n"); - } -} diff --git a/src/mainboard/supermicro/x6dai_g/devicetree.cb b/src/mainboard/supermicro/x6dai_g/devicetree.cb deleted file mode 100644 index 60508a341a..0000000000 --- a/src/mainboard/supermicro/x6dai_g/devicetree.cb +++ /dev/null @@ -1,65 +0,0 @@ -chip northbridge/intel/e7525 # mch - device domain 0 on - subsystemid 0x15d9 0x6780 inherit - chip southbridge/intel/esb6300 # esb6300 - register "pirq_a_d" = "0x0b0a0a05" - register "pirq_e_h" = "0x0a0b0c80" - - device pci 1c.0 on end - - device pci 1d.0 on end - device pci 1d.1 on end - device pci 1d.4 on end - device pci 1d.5 on end - device pci 1d.7 on end - - device pci 1e.0 on end - - device pci 1f.0 on - chip superio/winbond/w83627hf - device pnp 2e.0 off end - device pnp 2e.1 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.4 off end - device pnp 2e.5 off end - device pnp 2e.6 off end - device pnp 2e.7 off end - device pnp 2e.9 off end - device pnp 2e.a on end - device pnp 2e.b off end - device pnp 2e.f off end - device pnp 2e.10 off end - device pnp 2e.14 off end - end - end - device pci 1f.1 on end - device pci 1f.2 on end - device pci 1f.3 on end - device pci 1f.5 off end - device pci 1f.6 on end - end - device pci 00.0 on end - device pci 00.1 on end - device pci 00.2 on end - device pci 02.0 on end - device pci 03.0 on end - device pci 04.0 on end - device pci 08.0 on end - end - device cpu_cluster 0 on - chip cpu/intel/socket_mPGA604 # cpu0 - device lapic 0 on end - end - chip cpu/intel/socket_mPGA604 # cpu1 - device lapic 6 on end - end - end -end - diff --git a/src/mainboard/supermicro/x6dai_g/irq_tables.c b/src/mainboard/supermicro/x6dai_g/irq_tables.c deleted file mode 100644 index 9cdf0274ff..0000000000 --- a/src/mainboard/supermicro/x6dai_g/irq_tables.c +++ /dev/null @@ -1,39 +0,0 @@ -/* PCI: Interrupt Routing Table found at 0x40163ed0 size = 272 */ - -#include <arch/pirq_routing.h> - -static const struct irq_routing_table intel_irq_routing_table = { - 0x52495024, /* u32 signature */ - 0x0100, /* u16 version */ - 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* u16 Table size 32+(16*devices) */ - 0x00, /* u8 Bus 0 */ - 0xf8, /* u8 Device 1, Function 0 */ - 0x0000, /* u16 reserve IRQ for PCI */ - 0x8086, /* u16 Vendor */ - 0x122e, /* Device ID */ - 0x00000000, /* u32 miniport_data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x78, /* u8 checksum - mod 256 checksum must give zero */ - { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00, 0x00, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0x00}, - {0x00, 0x10, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x00, 0x00}, - {0x01, 0x00, {{0x60, 0x1ef8}, {0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x1ef8}}, 0x04, 0x00}, - {0x00, 0x20, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x00, 0x00}, - {0x02, 0x00, {{0x60, 0x1ef8}, {0x61, 0x1ef8}, {0x62, 0x1ef8}, {0x63, 0x1ef8}}, 0x06, 0x00}, - {0x00, 0xe0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x00, 0x00}, - {0x04, 0x08, {{0x6a, 0x1ef8}, {0x6a, 0x1ef8}, {0x6a, 0x1ef8}, {0x6a, 0x1ef8}}, 0x01, 0x00}, - {0x04, 0x10, {{0x6a, 0x1ef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x07, 0x00}, - {0x04, 0x18, {{0x6a, 0x1ef8}, {0x6a, 0x1ef8}, {0x6a, 0x1ef8}, {0x6a, 0x1ef8}}, 0x02, 0x00}, - {0x00, 0xf0, {{0x60, 0xdef8}, {0x61, 0xdef8}, {0x62, 0xdef8}, {0x63, 0xdef8}}, 0x00, 0x00}, - {0x05, 0x40, {{0x68, 0x1ef8}, {0x69, 0x1ef8}, {0x6a, 0x1ef8}, {0x6b, 0x1ef8}}, 0x03, 0x00}, - {0x05, 0x18, {{0x6a, 0x1ef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x08, 0x00}, - {0x05, 0x10, {{0x69, 0x1ef8}, {0x6a, 0x1ef8}, {0x6b, 0x1ef8}, {0x68, 0x1ef8}}, 0x05, 0x00}, - {0x00, 0xf8, {{0x62, 0x1ef8}, {0x61, 0x1ef8}, {0x00, 0xdef8}, {0x00, 0xdef8}}, 0x00, 0x00}, - {0x00, 0xe8, {{0x60, 0x1ef8}, {0x63, 0x1ef8}, {0x00, 0xdef8}, {0x6b, 0x1ef8}}, 0x00, 0x00} - } -}; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/supermicro/x6dai_g/mptable.c b/src/mainboard/supermicro/x6dai_g/mptable.c deleted file mode 100644 index 0efae773c7..0000000000 --- a/src/mainboard/supermicro/x6dai_g/mptable.c +++ /dev/null @@ -1,88 +0,0 @@ -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/ioapic.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned char bus_6300; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - { - device_t dev; - - /* southbridge */ - dev = dev_find_slot(0, PCI_DEVFN(0x1e,0)); - if (dev) { - bus_6300 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1e.0, using defaults\n"); - bus_6300 = 5; - } - } - - mptable_write_buses(mc, NULL, &bus_isa); - - /* IOAPIC handling */ - - smp_write_ioapic(mc, 2, 0x20, IO_APIC_ADDR); - smp_write_ioapic(mc, 3, 0x20, IO_APIC_ADDR + 0x10000); - - mptable_add_isa_interrupts(mc, bus_isa, 0x2, 0); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0x00, 0x74, 0x02, 0x10); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0x00, 0x77, 0x02, 0x17); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0x00, 0x75, 0x02, 0x13); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0x00, 0x7c, 0x02, 0x12); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0x00, 0x7d, 0x02, 0x11); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 0x00, 0x7d, 0x02, 0x11); - /* Slot 1 function 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 4, 0x04, 0x03, 0x00); - /* Slot 2 function 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - 4, 0x0c, 0x03, 0x01); - /* Slot 3 function 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_6300, 0x20, 0x02, 0x14); - /* Slot 4 function 0 */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_6300, 0x08, 0x02, 0x15); - /* On board NIC */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - bus_6300, 0x0c, 0x02, 0x16); - - /* Standard local interrupt assignments */ -// smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, -// bus_isa, 0x00, MP_APIC_ALL, 0x00); - smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, - bus_isa, 0x00, MP_APIC_ALL, 0x01); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/x6dai_g/romstage.c b/src/mainboard/supermicro/x6dai_g/romstage.c deleted file mode 100644 index bd9eda7722..0000000000 --- a/src/mainboard/supermicro/x6dai_g/romstage.c +++ /dev/null @@ -1,98 +0,0 @@ -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <stdlib.h> -#include <console/console.h> -#include "drivers/pc80/udelay_io.c" -#include "lib/delay.c" -#include "southbridge/intel/esb6300/early_smbus.c" -#include "northbridge/intel/e7525/raminit.h" -#include "cpu/x86/lapic/boot_cpu.c" -#include "cpu/x86/mtrr/earlymtrr.c" -#include "lib/debug.c" // XXX -#include "watchdog.c" -#include "southbridge/intel/esb6300/reset.c" -#include "superio/winbond/w83627hf/early_serial.c" -#include <superio/winbond/w83627hf/w83627hf.h> -#include "northbridge/intel/e7525/memory_initialized.c" -#include "cpu/x86/bist.h" -#include <spd.h> - -#define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define HIDDEN_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP2) -#define DUMMY_DEV PNP_DEV(0x2e, 0) - -#define DEVPRES_CONFIG ( \ - DEVPRES_D1F0 | \ - DEVPRES_D2F0 | \ - DEVPRES_D3F0 | \ - DEVPRES_D4F0 | \ - DEVPRES_D6F0 | \ - 0 ) -#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) - -static inline int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/intel/e7525/raminit.c" -#include "lib/generic_sdram.c" -#include "arch/x86/lib/stages.c" - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - static const struct mem_controller mch[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x00, 0), - .f1 = PCI_DEV(0, 0x00, 1), - .f2 = PCI_DEV(0, 0x00, 2), - .f3 = PCI_DEV(0, 0x00, 3), - .channel0 = {DIMM3, DIMM2, DIMM1, DIMM0, }, - .channel1 = {DIMM7, DIMM6, DIMM5, DIMM4, }, - } - }; - - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - early_mtrr_init(); - if (memory_initialized()) - skip_romstage(); - } - - w83627hf_set_clksel_48(DUMMY_DEV); - w83627hf_enable_serial(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* MOVE ME TO A BETTER LOCATION !!! */ - /* config LPC decode for flash memory access */ - device_t dev; - dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0); - if (dev == PCI_DEV_INVALID) - die("Missing 6300ESB?"); - pci_write_config32(dev, 0xe8, 0x00000000); - pci_write_config8(dev, 0xf0, 0x00); - -#if 0 - display_cpuid_update_microcode(); - print_pci_devices(); -#endif -#if 1 - enable_smbus(); -#endif -#if 0 - int i; - for(i = 0; i < 1; i++) - dump_spd_registers(); -#endif - disable_watchdogs(); - sdram_initialize(ARRAY_SIZE(mch), mch); -#if 1 - dump_pci_device(PCI_DEV(0, 0x00, 0)); -// dump_bar14(PCI_DEV(0, 0x00, 0)); -#endif -} diff --git a/src/mainboard/supermicro/x6dai_g/watchdog.c b/src/mainboard/supermicro/x6dai_g/watchdog.c deleted file mode 100644 index 2fd3274de8..0000000000 --- a/src/mainboard/supermicro/x6dai_g/watchdog.c +++ /dev/null @@ -1,41 +0,0 @@ -#include <device/pnp_def.h> - -#define NSC_WD_DEV PNP_DEV(0x2e, 0xa) -#define NSC_WDBASE 0x600 -#define ICH5_WDBASE 0x400 -#define ICH5_GPIOBASE 0x500 - -static void disable_esb6300_watchdog(void) -{ - /* FIXME move me somewhere more appropriate */ - device_t dev; - unsigned long value, base; - dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0); - if (dev == PCI_DEV_INVALID) { - die("Missing 6300ESB?"); - } - /* Enable I/O space */ - value = pci_read_config16(dev, 0x04); - value |= (1 << 10); - pci_write_config16(dev, 0x04, value); - - /* Set and enable acpibase */ - pci_write_config32(dev, 0x40, ICH5_WDBASE | 1); - pci_write_config8(dev, 0x44, 0x10); - base = ICH5_WDBASE + 0x60; - - /* Set bit 11 in TCO1_CNT */ - value = inw(base + 0x08); - value |= 1 << 11; - outw(value, base + 0x08); - - /* Clear TCO timeout status */ - outw(0x0008, base + 0x04); - outw(0x0002, base + 0x06); -} - -static void disable_watchdogs(void) -{ - disable_esb6300_watchdog(); - print_debug("Watchdogs disabled\n"); -} |