diff options
Diffstat (limited to 'src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb')
| -rw-r--r-- | src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb | 124 |
1 files changed, 124 insertions, 0 deletions
diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb new file mode 100644 index 0000000000..ea90e0b0ba --- /dev/null +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb @@ -0,0 +1,124 @@ +chip soc/intel/skylake + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_G" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + register "gen1_dec" = "0x007c0a01" # Super IO SWC + register "gen2_dec" = "0x000c0ca1" # IPMI KCS + register "gen3_dec" = "0x000c03e1" # UART3 + register "gen4_dec" = "0x000c02e1" # UART4 + + # PCIe configuration + register "PcieRpEnable[0]" = "1" # Enable PCH PCIe Port 1 / PCH SLOT4 + register "PcieRpEnable[4]" = "1" # Enable PCH PCIe Port 5 / PCH SLOT5 + register "PcieRpEnable[8]" = "1" # Enable PCH PCIe Port 9 / GbE 1 + register "PcieRpEnable[9]" = "1" # Enable PCH PCIe Port 10 / GbE 2 + register "PcieRpEnable[10]" = "1" # Enable PCH PCIe Port 11 / Aspeed 2400 VGA + + # USB configuration + # USB0/1 + register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" + + # USB2/3 + register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" + + # USB4/5 + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" + + # USB6/7 (USB3.0) + register "usb2_ports[11]" = "USB2_PORT_MID(OC4)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC4)" + register "usb2_ports[10]" = "USB2_PORT_MID(OC4)" + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC4)" + + # USB8/9 (USB3.0) + register "usb2_ports[1]" = "USB2_PORT_MID(OC3)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC3)" + register "usb2_ports[0]" = "USB2_PORT_MID(OC3)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" + + # USB10 (USB3.0) + register "usb2_ports[9]" = "USB2_PORT_MID(OC5)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC5)" + + # IPMI USB HUB + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" + + device domain 0 on + device pci 01.0 on # CPU PCIe Port (x16) / PCIe Slot 6 (JPCIE6) + smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" "CPU SLOT6 PCI-E 3.0 X8(IN X16)" "SlotDataBusWidth8X" + end + device pci 01.1 on # CPU PCIe Port (x8) / PCIe Slot 7 (JPCIE7) + smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "CPU SLOT7 PCI-E 3.0 X8" "SlotDataBusWidth8X" + end + device pci 1c.0 on # PCH PCIe Port 1 / PCIe Slot 4 (JPCIE4) + smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "PCH SLOT4 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X" + end + device pci 1c.4 on # PCH PCIe Port 5 / PCIe Slot 5 (JPCIE5) + smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "PCH SLOT5 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X" + end + device pci 1d.0 on # PCH PCIe Port 9 + device pci 00.0 on end # GbE 1 + end + device pci 1d.1 on # PCH PCIe Port 10 + device pci 00.1 on end # GbE 2 + end + device pci 1d.2 on # PCH PCIe Port 11 + device pci 00.0 on # Aspeed PCI Bridge + device pci 00.0 on end # Aspeed 2400 VGA + end + end + device pci 1f.0 on # LPC Interface + chip drivers/ipmi + # On cold boot it takes a while for the BMC to start the IPMI service + register "wait_for_bmc" = "1" + register "bmc_boot_timeout" = "60" + device pnp ca2.0 on end # IPMI KCS + end + chip superio/common + device pnp 2e.0 on + chip superio/aspeed/ast2400 + device pnp 2e.2 on # SUART1 / COM1 (ext) + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 on # SUART2 / COM2 (int) + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.4 on # SWC + io 0x60 = 0xa00 + io 0x62 = 0xa10 + io 0x64 = 0xa20 + io 0x66 = 0xa30 + irq 0x70 = 0xb + end + device pnp 2e.5 off end # KBC + device pnp 2e.7 on end # GPIO + device pnp 2e.b on # SUART3 + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.c on # SUART4 + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.d on end # iLPC2AHB + device pnp 2e.e on # Mailbox + io 0x60 = 0xa40 + irq 0x70 = 0x00 + end + end + end + end + end + end +end |