diff options
Diffstat (limited to 'src/mainboard/supermicro/x11-lga1151-series/devicetree.cb')
| -rw-r--r-- | src/mainboard/supermicro/x11-lga1151-series/devicetree.cb | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb new file mode 100644 index 0000000000..a5ff0c5df0 --- /dev/null +++ b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb @@ -0,0 +1,240 @@ +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # FSP Configuration + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "SaGv" = "SaGv_Disabled" + + # Disable SGX + register "sgx_enable" = "0" # SGX is broken in coreboot + register "PrmrrSize" = "128 * MiB" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # SATA configuration + register "SataMode" = "KBLFSP_SATA_MODE_AHCI" + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 1, \ + [5] = 1, \ + [6] = 1, \ + [7] = 1, \ + }" + + register "SataPortsDevSlp" = "{\ + [0] = 0, \ + [1] = 0, \ + [2] = 0, \ + [3] = 0, \ + [4] = 0, \ + [5] = 0, \ + [6] = 0, \ + [7] = 0, \ + }" + + # superspeed_inter-chip_supplement (SSIC) disabled + register "SsicPortEnable" = "0" + + # USB configuration + # USB2/3 + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" + + # ? + register "usb2_ports[14]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[15]" = "USB2_PORT_MID(OC0)" + + # USB4/5 + register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" + + # USB0/1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" + + # USB9/10 (USB3.0) + register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" + register "usb2_ports[12]" = "USB2_PORT_MID(OC3)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC3)" + + # USB6/7 (USB3.0) + register "usb2_ports[10]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[11]" = "USB2_PORT_MID(OC4)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC4)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC4)" + + # USB8 (USB3.0) + register "usb2_ports[9]" = "USB2_PORT_MID(OC5)" + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC5)" + + # IPMI USB HUB + register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" + + # LPC + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + register "PmConfigSlpS3MinAssert" = "SLP_S3_MIN_ASSERT_50MS" + register "PmConfigSlpS4MinAssert" = "SLP_S4_MIN_ASSERT_4S" + register "PmConfigSlpSusMinAssert" = "SLP_SUS_MIN_ASSERT_4S" + register "PmConfigSlpAMinAssert" = "SLP_A_MIN_ASSERT_2S" + + # VR Settings Configuration for 4 Domains + # ICC_MAX = 0 (Auto) + # Voltage limit 1.52V (not used on KBL-S and KBL-DT) + # Disable PS4 powerstate in S0ix, thus no package C10 support + # psi threshold is using FSP default values + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, \ + .psi4enable = 0, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0, \ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, \ + .psi4enable = 0, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0, \ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, \ + .psi4enable = 0, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0 ,\ + .voltage_limit = 1520 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, \ + .psi4enable = 0, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0, \ + .voltage_limit = 1520 \ + }" + + # No extra VR mailbox command + register "SendVrMbxCmd" = "0" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 01.0 off end # CPU PCIe Port 10 (x16) + device pci 01.1 off end # CPU PCIe Port 11 (x8) + device pci 01.2 off end # CPU PCIe Port 12 (x4) + device pci 02.0 off end # Integrated Graphics Device (IGD) + device pci 04.0 on end # SA thermal subsystem + device pci 05.0 off end # Imaging Unit + device pci 08.0 off end # Gaussion Mixture Model (GMM) + device pci 13.0 off end # Integrated Sensor Hub + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 19.0 off end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 off end # I2C #4 + device pci 1b.0 off end # PCH PCIe Port 17 + device pci 1b.1 off end # PCH PCIe Port 18 + device pci 1b.2 off end # PCH PCIe Port 19 + device pci 1b.3 off end # PCH PCIe Port 20 + device pci 1c.0 off end # PCH PCIe Port 1 + device pci 1c.1 off end # PCH PCIe Port 2 + device pci 1c.2 off end # PCH PCIe Port 3 + device pci 1c.3 off end # PCH PCIe Port 4 + device pci 1c.4 off end # PCH PCIe Port 5 + device pci 1c.5 off end # PCH PCIe Port 6 + device pci 1c.6 off end # PCH PCIe Port 7 + device pci 1c.7 off end # PCH PCIe Port 8 + device pci 1d.0 off end # PCH PCIe Port 9 + device pci 1d.1 off end # PCH PCIe Port 10 + device pci 1d.2 off end # PCH PCIe Port 11 + device pci 1d.3 off end # PCH PCIe Port 12 + device pci 1d.4 off end # PCH PCIe Port 13 + device pci 1d.5 off end # PCH PCIe Port 14 + device pci 1d.6 off end # PCH PCIe Port 15 + device pci 1d.7 off end # PCH PCIe Port 16 + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # SPI #0 + device pci 1f.0 on # LPC Interface + chip superio/common + device pnp 2e.0 on end + end + chip drivers/pc80/tpm # TPM + device pnp 0c31.0 on end + end + end + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 off end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # SPI Controller + device pci 1f.6 off end # GbE + device pci 1f.7 off end # Intel Trace Hub + end +end |