summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8scm/dimmSpd.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/supermicro/h8scm/dimmSpd.c')
-rw-r--r--src/mainboard/supermicro/h8scm/dimmSpd.c229
1 files changed, 229 insertions, 0 deletions
diff --git a/src/mainboard/supermicro/h8scm/dimmSpd.c b/src/mainboard/supermicro/h8scm/dimmSpd.c
new file mode 100644
index 0000000000..81bdbd6b81
--- /dev/null
+++ b/src/mainboard/supermicro/h8scm/dimmSpd.c
@@ -0,0 +1,229 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info);
+#define DIMENSION(array)(sizeof (array)/ sizeof (array [0]))
+
+/* SP5100 GPIO 49-52 contoled by SMBUS PCI_Reg 0x52 */
+#define SP5100_GPIO37_46_47_48 0xA6
+#define SP5100_GPIO49_52 0x50
+
+/**
+ * TODO not support all GPIO yet
+ * @param reg -GPIO Cntrl Register
+ * @param out -GPIO bitmap
+ * @param out -GPIO enable bitmap
+ * @return old setting
+ */
+static u8 sp5100_set_gpio(u8 reg, u8 out, u8 enable)
+{
+ u8 value, ret;
+ device_t sm_dev = PCI_DEV(0, 0x14, 0); //SMBUS
+
+ value = pci_read_config8(sm_dev, reg);
+ ret = value;
+ value &= ~(enable);
+ value |= out;
+ value &= ~(enable << 4);
+ pci_write_config8(sm_dev, reg, value);
+
+ return ret;
+}
+
+static void sp5100_restore_gpio(u8 reg, u8 value)
+{
+ device_t sm_dev = PCI_DEV(0, 0x14, 0);
+ pci_write_config8(sm_dev, reg, value);
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * SPD address table - porting required
+ */
+static const UINT8 spdAddressLookup [1] [2] [2] = { // socket, channel, dimm
+ /* socket 0 */
+ {
+ {0xA4, 0xA6},
+ {0xA0, 0xA2},
+ },
+ /* socket 1 */
+ /* { */
+ /* {0xA0, 0xA4, 0xA8}, */
+ /* {0xA2, 0xA6, 0xAA}, */
+ /* }, */
+};
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByteData - read a single SPD byte from any offset
+ */
+
+static int readSmbusByteData (int iobase, int address, char *buffer, int offset)
+{
+ unsigned int status;
+ UINT64 limit;
+
+ address |= 1; // set read bit
+
+ outb(0xFF, iobase + 0); // clear error status
+ outb(0x1F, iobase + 1); // clear error status
+ outb(offset, iobase + 3); // offset in eeprom
+ outb(address, iobase + 4); // slave address and read bit
+ outb(0x48, iobase + 2); // read byte command
+
+ // time limit to avoid hanging for unexpected error status (should never happen)
+ limit = __rdtsc () + 2000000000 / 10;
+ for (;;)
+ {
+ status = inb(iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = inb(iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
+}
+
+/*-----------------------------------------------------------------------------
+ *
+ * readSmbusByte - read a single SPD byte from the default offset
+ * this function is faster function readSmbusByteData
+ */
+
+static int readSmbusByte (int iobase, int address, char *buffer)
+{
+ unsigned int status;
+ UINT64 limit;
+
+ outb(0xFF, iobase + 0); // clear error status
+ outb(0x44, iobase + 2); // read command
+
+ // time limit to avoid hanging for unexpected error status
+ limit = __rdtsc () + 2000000000 / 10;
+ for (;;)
+ {
+ status = inb(iobase);
+ if (__rdtsc () > limit) break;
+ if ((status & 2) == 0) continue; // SMBusInterrupt not set, keep waiting
+ if ((status & 1) == 1) continue; // HostBusy set, keep waiting
+ break;
+ }
+
+ buffer [0] = inb(iobase + 5);
+ if (status == 2) status = 0; // check for done with no errors
+ return status;
+}
+
+/*---------------------------------------------------------------------------
+ *
+ * readspd - Read one or more SPD bytes from a DIMM.
+ * Start with offset zero and read sequentially.
+ * Optimization relies on autoincrement to avoid
+ * sending offset for every byte.
+ * Reads 128 bytes in 7-8 ms at 400 KHz.
+ */
+
+static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
+{
+ int index, error;
+
+ /* read the first byte using offset zero */
+ error = readSmbusByteData (iobase, SmbusSlaveAddress, buffer, 0);
+ if (error) {
+ return error;
+ }
+
+ /* read the remaining bytes using auto-increment for speed */
+ for (index = 1; index < count; index++)
+ {
+ error = readSmbusByte (iobase, SmbusSlaveAddress, buffer + index);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static void setupFch (int ioBase)
+{
+ outb(66000000 / 400000 / 4, ioBase + 0x0E); /* set SMBus clock to 400 KHz */
+}
+
+AGESA_STATUS AmdMemoryReadSPD (UINT32 unused1, UINT32 unused2, AGESA_READ_SPD_PARAMS *info)
+{
+ AGESA_STATUS status;
+ int spdAddress, ioBase, i;
+ u8 i2c_channel;
+ u8 backup;
+ device_t sm_dev;
+
+ if (info->SocketId >= DIMENSION (spdAddressLookup )) return AGESA_ERROR;
+ if (info->MemChannelId >= DIMENSION (spdAddressLookup[0] )) return AGESA_ERROR;
+ if (info->DimmId >= DIMENSION (spdAddressLookup[0][0])) return AGESA_ERROR;
+ i2c_channel = (UINT8) info->SocketId;
+
+ printk(BIOS_DEBUG, "S=%x, c=%x, d=%x\n", info->SocketId, info->MemChannelId, info->DimmId);
+ /* set IDTQS3253 i2c channel
+ * GPIO49,48 control the S1,S0
+ * S1 S0 true table
+ * 0 0 channel 0
+ * 0 1 channel 1
+ * 1 0 channel 2 - Socket 0
+ * 1 1 channel 3 - Socket 1
+ * Note: Above is abstracted from Schemetic. But actually it seems to be other way.
+ * 1 0 channel 2 - Socket 1
+ * 1 1 channel 3 - Socket 0
+ * Note: The DIMMs need to be plugged in from the farthest slot for each channel.
+ */
+ //backup = sp5100_set_gpio(SP5100_GPIO49_52, 0x1, 0x1);
+ //sp5100_set_gpio(SP5100_GPIO37_46_47_48, (~i2c_channel & 1) << 3, 0x1 << 3);
+
+ spdAddress = spdAddressLookup [info->SocketId] [info->MemChannelId] [info->DimmId];
+ if (spdAddress == 0)
+ return AGESA_ERROR;
+
+ /*
+ * SMBus Base Address was set during southbridge early setup.
+ * e.g. sb700 IO mapped SMBUS_IO_BASE 0x6000, CIMX using 0xB00 as default
+ */
+ sm_dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SB700_SM), 0);
+ ioBase = pci_read_config32(sm_dev, 0x90) & (0xFFFFFFF0);
+ setupFch(ioBase);
+
+ status = readspd(ioBase, spdAddress, (void *)info->Buffer, 256);
+ for (i=0; i<256; i++) {
+ printk(BIOS_DEBUG, "%02X ", info->Buffer[i]);
+ if ((i%16)==15)
+ printk(BIOS_DEBUG, "\n");
+ }
+ printk(BIOS_DEBUG, "\n");
+ //sp5100_restore_gpio(SP5100_GPIO49_52, backup);
+
+ return status;
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 23:17:15 +0000