diff options
Diffstat (limited to 'src/mainboard/supermicro/h8qgi/devicetree.cb')
| -rw-r--r-- | src/mainboard/supermicro/h8qgi/devicetree.cb | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/src/mainboard/supermicro/h8qgi/devicetree.cb b/src/mainboard/supermicro/h8qgi/devicetree.cb deleted file mode 100644 index 5ba52b624a..0000000000 --- a/src/mainboard/supermicro/h8qgi/devicetree.cb +++ /dev/null @@ -1,222 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -chip northbridge/amd/agesa/family15/root_complex - device cpu_cluster 0 on - chip cpu/amd/agesa/family15 - device lapic 0x20 on end #f15 - #device lapic 0x10 on end #f10 - end - end - device domain 0 on - subsystemid 0x15d9 0xab11 inherit #SuperMicro - chip northbridge/amd/agesa/family15 # CPU side of HT root complex - device pci 18.0 on # Put IO-HUB at link_num 0, Instead of HT Link topology - chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex - device pci 0.0 on end # HT Root Complex 0x9600 - device pci 0.1 off end # CLKCONFIG - device pci 2.0 on end # GPP1 Port0 x16 SLOT4, 0x5A16 - device pci 3.0 off end # GPP1 Port1 - device pci 4.0 off end # GPP3a Port0 x4 SAS - device pci 5.0 off end # GPP3a Port1 - device pci 6.0 off end # GPP3a Port2 - device pci 7.0 off end # GPP3a Port3 - device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time - device pci 9.0 off end # GPP3a Port4 x1 NC - device pci a.0 off end # GPP3a Port5 x1 NC - device pci b.0 off end # GPP2 Port0 (Not for sr5650) - device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670) - device pci d.0 on end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576 - register "gpp1_configuration" = "0" # Configuration 16:0 default - register "gpp2_configuration" = "1" # Configuration 8:8 - register "gpp3a_configuration" = "2" # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1 - register "port_enable" = "0x2104" - end #northbridge/amd/cimx/rd890 - chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus - device pci 11.0 on end # SATA - device pci 12.0 on end # USB1 - device pci 12.1 on end # USB1 - device pci 12.2 on end # USB1 - device pci 13.0 on end # USB2 - device pci 13.1 on end # USB2 - device pci 13.2 on end # USB2 - device pci 14.0 on end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 off end # HDA 0x4383, h8qgi not have codec. - device pci 14.3 on # LPC 0x439d - chip superio/winbond/w83627dhg - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - ## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS## - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 0x01 #keyboard - irq 0x72 = 0x0C #mouse - end - device pnp 2e.6 off # SPI - end - device pnp 2e.307 off # GPIO6 - end - device pnp 2e.8 off # WDTO#, PLED - end - device pnp 2e.009 off # GPIO2 - end - device pnp 2e.109 off # GPIO3 - end - device pnp 2e.209 off # GPIO4 - end - device pnp 2e.309 off # GPIO5 - end - device pnp 2e.a off # ACPI - end - device pnp 2e.b off # HWM - io 0x60 = 0x290 - end - device pnp 2e.c off # PECI, SST - end - end #superio/winbond/w83627dhg - chip drivers/i2c/w83795 - register "fanin_ctl1" = "0xff" # Enable monitoring of FANIN1 - FANIN8 - register "fanin_ctl2" = "0x00" # Connect FANIN11 - FANIN14 to alternate functions - register "temp_ctl1" = "0x2a" # Enable monitoring of DTS, VSEN12, and VSEN13 - register "temp_ctl2" = "0x01" # Enable monitoring of TD1/TR1 - register "temp_dtse" = "0x03" # Enable DTS1 and DTS2 - register "volt_ctl1" = "0xff" # Enable monitoring of VSEN1 - VSEN8 - register "volt_ctl2" = "0xf7" # Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT - register "temp1_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp1) - register "temp2_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp2) - register "temp3_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp3) - register "temp4_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp4) - register "temp5_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp5) - register "temp6_fan_select" = "0x00" # All fans to manual mode (no dependence on Temp6) - register "temp1_source_select" = "0x00" # Use TD1/TR1 as data source for Temp1 - register "temp2_source_select" = "0x00" # Use TD2/TR2 as data source for Temp2 - register "temp3_source_select" = "0x00" # Use TD3/TR3 as data source for Temp3 - register "temp4_source_select" = "0x00" # Use TD4/TR4 as data source for Temp4 - register "temp5_source_select" = "0x00" # Use TR5 as data source for Temp5 - register "temp6_source_select" = "0x00" # Use TR6 as data source for Temp6 - register "tr1_critical_temperature" = "85" # Set TD1/TR1 critical temperature to 85°C - register "tr1_critical_hysteresis" = "80" # Set TD1/TR1 critical hysteresis temperature to 80°C - register "tr1_warning_temperature" = "70" # Set TD1/TR1 warning temperature to 70°C - register "tr1_warning_hysteresis" = "65" # Set TD1/TR1 warning hysteresis temperature to 65°C - register "dts_critical_temperature" = "85" # Set DTS (CPU) critical temperature to 85°C - register "dts_critical_hysteresis" = "80" # Set DTS (CPU) critical hysteresis temperature to 80°C - register "dts_warning_temperature" = "70" # Set DTS (CPU) warning temperature to 70°C - register "dts_warning_hysteresis" = "65" # Set DTS (CPU) warning hysteresis temperature to 65°C - register "temp1_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp2_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp3_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp4_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp5_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp6_critical_temperature" = "80" # Set Temp1 critical temperature to 80°C - register "temp1_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp2_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp3_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp4_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp5_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "temp6_target_temperature" = "80" # Set Temp1 target temperature to 80°C - register "fan1_nonstop" = "7" # Set Fan 1 minimum speed - register "fan2_nonstop" = "7" # Set Fan 2 minimum speed - register "fan3_nonstop" = "7" # Set Fan 3 minimum speed - register "fan4_nonstop" = "7" # Set Fan 4 minimum speed - register "fan5_nonstop" = "7" # Set Fan 5 minimum speed - register "fan6_nonstop" = "7" # Set Fan 6 minimum speed - register "fan7_nonstop" = "7" # Set Fan 7 minimum speed - register "fan8_nonstop" = "7" # Set Fan 8 minimum speed - register "default_speed" = "100" # All fans to full speed on power up - register "fan1_duty" = "100" # Fan 1 to full speed - register "fan2_duty" = "100" # Fan 2 to full speed - register "fan3_duty" = "100" # Fan 3 to full speed - register "fan4_duty" = "100" # Fan 4 to full speed - register "fan5_duty" = "100" # Fan 5 to full speed - register "fan6_duty" = "100" # Fan 6 to full speed - register "fan7_duty" = "100" # Fan 7 to full speed - register "fan8_duty" = "100" # Fan 8 to full speed - register "vcore1_high_limit_mv" = "1500" # VCORE1 (Node 0) high limit to 1.5V - register "vcore1_low_limit_mv" = "900" # VCORE1 (Node 0) low limit to 0.9V - register "vcore2_high_limit_mv" = "1500" # VCORE2 (Node 1) high limit to 1.5V - register "vcore2_low_limit_mv" = "900" # VCORE2 (Node 1) low limit to 0.9V - register "vsen3_high_limit_mv" = "1600" # VSEN1 (Node 0 RAM voltage) high limit to 1.6V - register "vsen3_low_limit_mv" = "1100" # VSEN1 (Node 0 RAM voltage) low limit to 1.1V - register "vsen4_high_limit_mv" = "1600" # VSEN2 (Node 1 RAM voltage) high limit to 1.6V - register "vsen4_low_limit_mv" = "1100" # VSEN2 (Node 1 RAM voltage) low limit to 1.1V - register "vsen5_high_limit_mv" = "1250" # VSEN5 (Node 0 HT link voltage) high limit to 1.25V - register "vsen5_low_limit_mv" = "1150" # VSEN5 (Node 0 HT link voltage) low limit to 1.15V - register "vsen6_high_limit_mv" = "1250" # VSEN6 (Node 1 HT link voltage) high limit to 1.25V - register "vsen6_low_limit_mv" = "1150" # VSEN6 (Node 1 HT link voltage) low limit to 1.15V - register "vsen7_high_limit_mv" = "1150" # VSEN7 (Northbridge core voltage) high limit to 1.15V - register "vsen7_low_limit_mv" = "1050" # VSEN7 (Northbridge core voltage) low limit to 1.05V - register "vsen8_high_limit_mv" = "1900" # VSEN8 (+1.8V) high limit to 1.9V - register "vsen8_low_limit_mv" = "1700" # VSEN8 (+1.8V) low limit to 1.7V - register "vsen9_high_limit_mv" = "1250" # VSEN9 (+1.2V) high limit to 1.25V - register "vsen9_low_limit_mv" = "1150" # VSEN9 (+1.2V) low limit to 1.15V - register "vsen10_high_limit_mv" = "1150" # VSEN10 (+1.1V) high limit to 1.15V - register "vsen10_low_limit_mv" = "1050" # VSEN10 (+1.1V) low limit to 1.05V - register "vsen11_high_limit_mv" = "1625" # VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V - register "vsen11_low_limit_mv" = "1500" # VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V - register "vsen12_high_limit_mv" = "1083" # VSEN12 (+12V, scaling factor ~12) high limit to 13V - register "vsen12_low_limit_mv" = "917" # VSEN12 (+12V, scaling factor ~12) low limit to 11V - register "vsen13_high_limit_mv" = "1625" # VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V - register "vsen13_low_limit_mv" = "1500" # VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V - register "vdd_high_limit_mv" = "3500" # 3VDD high limit to 3.5V - register "vdd_low_limit_mv" = "3100" # 3VDD low limit to 3.1V - register "vsb_high_limit_mv" = "3500" # 3VSB high limit to 3.5V - register "vsb_low_limit_mv" = "3100" # 3VSB low limit to 3.1V - register "vbat_high_limit_mv" = "3500" # VBAT (+3V) high limit to 3.5V - register "vbat_low_limit_mv" = "2500" # VBAT (+3V) low limit to 2.5V - register "smbus_aux" = "0" # Device located on primary SMBUS - device pnp 5e on #hwm - end - end #drivers/i2c/w83795 - end # LPC - device pci 14.4 on - device pci 4.0 on end # onboard VGA - end # PCI 0x4384 - device pci 14.5 on end # USB 3 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end # southbridge/amd/cimx/sb700 - end # device pci 18.0 - - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 18.5 on end #f15 - - register "spdAddrLookup" = " - { - { {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 0 - { {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 1 - { {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 2 - { {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 3 - }" - end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex - end #domain -end #northbridge/amd/agesa/family15/root_complex |