diff options
Diffstat (limited to 'src/mainboard/supermicro/h8dmr_fam10')
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/Kconfig | 62 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/Kconfig.name | 2 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/Makefile.inc | 16 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/README | 22 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/board_info.txt | 1 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/cmos.layout | 102 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/devicetree.cb | 152 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c | 78 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/hda_verb.c | 20 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/irq_tables.c | 137 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h | 26 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/mptable.c | 114 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/resourcemap.c | 284 | ||||
| -rw-r--r-- | src/mainboard/supermicro/h8dmr_fam10/romstage.c | 269 |
14 files changed, 0 insertions, 1285 deletions
diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig b/src/mainboard/supermicro/h8dmr_fam10/Kconfig deleted file mode 100644 index 928a84fc96..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_SUPERMICRO_H8DMR_FAM10 - -config BOARD_SPECIFIC_OPTIONS - def_bool y - select CPU_AMD_SOCKET_F_1207 - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDFAM10 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627HF - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_1024 - select ENABLE_APIC_EXT_ID - -config MAINBOARD_DIR - string - default supermicro/h8dmr_fam10 - -config DCACHE_RAM_BASE - hex - default 0xc4000 - -config DCACHE_RAM_SIZE - hex - default 0x0c000 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "H8DMR-i2 (Fam10)" - -config MAX_CPUS - int - default 8 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config HT_CHAIN_UNITID_BASE - hex - default 0x1 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_SUPERMICRO_H8DMR_FAM10 diff --git a/src/mainboard/supermicro/h8dmr_fam10/Kconfig.name b/src/mainboard/supermicro/h8dmr_fam10/Kconfig.name deleted file mode 100644 index 379d9bb026..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SUPERMICRO_H8DMR_FAM10 - bool "H8DMR-i2 (Fam10)" diff --git a/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc b/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc deleted file mode 100644 index 91d4b39c32..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/Makefile.inc +++ /dev/null @@ -1,16 +0,0 @@ -# -# This file is part of the coreboot project. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# - -romstage-y += resourcemap.c - -ramstage-y += get_bus_conf.c diff --git a/src/mainboard/supermicro/h8dmr_fam10/README b/src/mainboard/supermicro/h8dmr_fam10/README deleted file mode 100644 index ffcbcc021f..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/README +++ /dev/null @@ -1,22 +0,0 @@ - - -There are a number of outstanding issues: - -* I'm seeing toolchain issues. I can't get this tree to compile correctly with -gcc 4.3 (32 bit) - there is an optimization issue where certain parts of the -CBFS code execute very slowly. With gcc 3.4 (32 bit) that slowness -disappears. This is probably not a problem related to this port specifically. - -* setting CONFIG_DEFAULT_CONSOLE_LOGLEVEL lower than 8 simply hangs the boot -shortly after the warm reset triggered by the MCP55 code. I think this too -might be a toolchain problem (but I see it on gcc 3.4 as well as 4.3). - -* during startup, the CPU cores talk through each other on serial for a -while. Again, not an issue specific to this port. - -* to avoid very slow LZMA decompression I use this port with LZMA compression -disabled in CBFS. I'm not sure what's causing this particular slowness. - -See also this thread: https://www.coreboot.org/pipermail/coreboot/2009-September/052107.html - -Ward, 2009-09-22 diff --git a/src/mainboard/supermicro/h8dmr_fam10/board_info.txt b/src/mainboard/supermicro/h8dmr_fam10/board_info.txt deleted file mode 100644 index 3d902b640a..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: server diff --git a/src/mainboard/supermicro/h8dmr_fam10/cmos.layout b/src/mainboard/supermicro/h8dmr_fam10/cmos.layout deleted file mode 100644 index 331e0162bb..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/cmos.layout +++ /dev/null @@ -1,102 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering -## Copyright (C) 2007 AMD -## Written by Yinghai Lu <yinghailu@amd.com> for AMD. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -393 3 r 0 unused -#394 7 unused -401 1 e 1 interleave_chip_selects -402 1 e 1 interleave_nodes -403 1 e 1 interleave_memory_channels -404 2 e 8 max_mem_clock -406 1 e 2 multi_core -412 4 e 6 debug_level -416 5 e 10 ecc_scrub_rate -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 gart -446 1 e 1 power_on_after_fail -456 1 e 1 ECC_memory -457 1 e 1 ECC_redirection -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 0 Emergency -6 1 Alert -6 2 Critical -6 3 Error -6 4 Warning -6 5 Notice -6 6 Information -6 7 Debug -6 8 Spew -8 0 DDR2-800 -8 1 DDR2-667 -8 2 DDR2-533 -8 3 DDR2-400 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% -10 0 Disabled -10 1 40ns -10 2 80ns -10 3 160ns -10 4 320ns -10 5 640ns -10 6 1.28us -10 7 2.56us -10 8 5.12us -10 9 10.2us -10 10 20.5us -10 11 41us -10 12 81.9us -10 13 163.8us -10 14 327.7us -10 15 655.4us -10 16 1.31ms -10 17 2.62ms -10 18 5.24ms -10 19 10.49ms -10 20 20.97sms -10 21 42ms -10 22 84ms - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb b/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb deleted file mode 100644 index ee88c31a97..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/devicetree.cb +++ /dev/null @@ -1,152 +0,0 @@ -chip northbridge/amd/amdfam10/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F_1207 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x15d9 0x1511 inherit - chip northbridge/amd/amdfam10 # Northbridge / RAM controller - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # SB on link 2.0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf # Super I/O - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 - end - device pnp 2e.7 off # GPIO, game port, MIDI - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 1-1-1 - device i2c 57 on end - end - end - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # PCI - device pci 6.0 on end - end - device pci 6.1 on end # AZA - device pci 8.0 on end # NIC - device pci 9.0 on end # NIC - device pci a.0 on # PCI E 5 - device pci 0.0 on end # NEC PCI-X - device pci 0.1 on # NEC PCI-X - device pci 4.0 on end # SCSI - device pci 4.1 on end # SCSI - end - end - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - device pci 18.4 on end - device pci 19.0 on end - device pci 19.1 on end - device pci 19.2 on end - device pci 19.3 on end - device pci 19.4 on end - end - end -end diff --git a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c b/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c deleted file mode 100644 index 0bb16d36b2..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/get_bus_conf.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdfam10_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -void get_bus_conf(void) -{ - - unsigned int apicid_base; - struct mb_sysconf_t *m; - - struct device *dev; - int i; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - get_default_pci1234(32); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } - - for(i = 2; i < 8; i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (CONFIG(LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_mcp55 = apicid_base+0; - -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/hda_verb.c b/src/mainboard/supermicro/h8dmr_fam10/hda_verb.c deleted file mode 100644 index 5d088790a5..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/hda_verb.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c b/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c deleted file mode 100644 index 69327dcafa..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/irq_tables.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned int slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned int sbdn; - - uint8_t sum = 0; - int i; - - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = PCI_DEVFN(sbdn + 6, 0); - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], PCI_DEVFN(sbdn + 6, 0), 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned int busn = (sysconf.pci1234[i] >> 12) & 0xff; - unsigned int devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, PCI_DEVFN(devn, 0), 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - } - -#if CONFIG_CBB - write_pirq_info(pirq_info, CONFIG_CBB, PCI_DEVFN(0, 0), 0x1, 0xdef8, 0x2, - 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - if (sysconf.nodes > 32) { - write_pirq_info(pirq_info, CONFIG_CBB - 1, PCI_DEVFN(0, 0), 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, - 0, 0); - pirq_info++; - slot_num++; - } -#endif - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h b/src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h deleted file mode 100644 index 1a287c6a8a..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/mb_sysconf.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned int apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/supermicro/h8dmr_fam10/mptable.c b/src/mainboard/supermicro/h8dmr_fam10/mptable.c deleted file mode 100644 index cdb2980867..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/mptable.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <stdint.h> -#include <cpu/amd/amdfam10_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned int sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00012d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - - /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 1, 1, m->apicid_mcp55, 0xa); - - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 2, 0, m->apicid_mcp55, 0x16); // 22) - - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 2, 1, m->apicid_mcp55, 0x17); // 23) - - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 6, 1, m->apicid_mcp55, 0x17); // 23) - - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 5, 0, m->apicid_mcp55, 0x14); // 20) - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 5, 1, m->apicid_mcp55, 0x17); // 23) - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 5, 2, m->apicid_mcp55, 0x15); // 21) - - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 8, 0, m->apicid_mcp55, 0x16); // 22) - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[0], sbdn + 9, 0, m->apicid_mcp55, 0x15); // 21) - - for(j = 7; j >= 2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i = 0; i < 4; i++) { - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[j], 0x00, i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } - - for(j = 0; j < 1; j++) - for(i = 0; i < 4; i++) { - smp_write_pci_intsrc(mc, mp_INT, m->bus_mcp55[1], 0x04+j, i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c b/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c deleted file mode 100644 index 2398ba25d7..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/resourcemap.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <commonlib/helpers.h> -#include <northbridge/amd/amdfam10/amdfam10.h> - -void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - // ADDRMAP_REG(0x44), 0x0000f8f8, 0x00000000, // Don't touch it, we need it for CAR with FAM10 - ADDRMAP_REG(0x4C), 0x0000f8f8, 0x00000001, - ADDRMAP_REG(0x54), 0x0000f8f8, 0x00000002, - ADDRMAP_REG(0x5C), 0x0000f8f8, 0x00000003, - ADDRMAP_REG(0x64), 0x0000f8f8, 0x00000004, - ADDRMAP_REG(0x6C), 0x0000f8f8, 0x00000005, - ADDRMAP_REG(0x74), 0x0000f8f8, 0x00000006, - ADDRMAP_REG(0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - // ADDRMAP_REG(0x40), 0x0000f8fc, 0x00000000, // don't touch it, we need it for CAR with FAM10 - ADDRMAP_REG(0x48), 0x0000f8fc, 0x00000000, - ADDRMAP_REG(0x50), 0x0000f8fc, 0x00000000, - ADDRMAP_REG(0x58), 0x0000f8fc, 0x00000000, - ADDRMAP_REG(0x60), 0x0000f8fc, 0x00000000, - ADDRMAP_REG(0x68), 0x0000f8fc, 0x00000000, - ADDRMAP_REG(0x70), 0x0000f8fc, 0x00000000, - ADDRMAP_REG(0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp address bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - ADDRMAP_REG(0x84), 0x00000048, 0x00000000, - ADDRMAP_REG(0x8C), 0x00000048, 0x00000000, - ADDRMAP_REG(0x94), 0x00000048, 0x00000000, - ADDRMAP_REG(0x9C), 0x00000048, 0x00000000, - ADDRMAP_REG(0xA4), 0x00000048, 0x00000000, - ADDRMAP_REG(0xAC), 0x00000048, 0x00000000, - ADDRMAP_REG(0xB4), 0x00000048, 0x00000000, -// ADDRMAP_REG(0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - ADDRMAP_REG(0x80), 0x000000f0, 0x00000000, - ADDRMAP_REG(0x88), 0x000000f0, 0x00000000, - ADDRMAP_REG(0x90), 0x000000f0, 0x00000000, - ADDRMAP_REG(0x98), 0x000000f0, 0x00000000, - ADDRMAP_REG(0xA0), 0x000000f0, 0x00000000, - ADDRMAP_REG(0xA8), 0x000000f0, 0x00000000, - ADDRMAP_REG(0xB0), 0x000000f0, 0x00000000, -// ADDRMAP_REG(0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// WARD CHANGED - ADDRMAP_REG(0xC4), 0xFE000FC8, 0x01fff020, - ADDRMAP_REG(0xCC), 0xFE000FC8, 0x00000000, // need to talk to ANALOG of second CK804 to release PCI E reset - ADDRMAP_REG(0xD4), 0xFE000FC8, 0x00000000, - ADDRMAP_REG(0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - // WARD CHANGED - ADDRMAP_REG(0xC0), 0xFE000FCC, 0x00000033, - ADDRMAP_REG(0xC8), 0xFE000FCC, 0x00000000, - ADDRMAP_REG(0xD0), 0xFE000FCC, 0x00000000, - ADDRMAP_REG(0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ - // WARD CHANGED - ADDRMAP_REG(0xE0), 0x0000FC88, 0x3f000203, /* link 2 of CPU 0 --> Nvidia MCP55 Pro */ - ADDRMAP_REG(0xE4), 0x0000FC88, 0x00000000, - ADDRMAP_REG(0xE8), 0x0000FC88, 0x00000000, - ADDRMAP_REG(0xEC), 0x0000FC88, 0x00000000, - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c deleted file mode 100644 index 6f6ac712c7..0000000000 --- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <arch/cpu.h> -#include <cpu/x86/lapic.h> -#include <console/console.h> -#include <timestamp.h> -#include <spd.h> -#include <cpu/amd/model_10xxx_rev.h> -#include <delay.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627hf/w83627hf.h> -#include <cpu/x86/bist.h> -#include <cpu/amd/car.h> -#include <cpu/amd/msr.h> -#include <southbridge/amd/common/reset.h> -#include <northbridge/amd/amdfam10/raminit.h> -#include <northbridge/amd/amdht/ht_wrapper.h> -#include <cpu/amd/family_10h-family_15h/init_cpus.h> -#include <arch/early_variables.h> -#include <cbmem.h> - -#include <southbridge/nvidia/mcp55/mcp55.h> // for enable the FAN - -#include "cpu/amd/quadcore/quadcore.c" -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" - -#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) -#define SUPERIO_DEV PNP_DEV(0x2e, 0) - -int spd_read_byte(unsigned int device, unsigned int address); - - -inline int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -unsigned int get_sbdn(unsigned int bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - enable_smbus(); - // smbusx_write_byte(1, (0x58 >> 1), 0, 0x80); /* select bank0 */ - /* set FAN ctrl to DC mode */ - smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -static const u8 spd_addr[] = { - //first node - RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, -#if CONFIG_MAX_PHYSICAL_CPUS > 1 - //second node - RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, -#endif -}; - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - struct sys_info *sysinfo = get_sysinfo(); - u32 bsp_apicid = 0, val, wants_reset; - msr_t msr; - - timestamp_init(timestamp_get()); - timestamp_add_now(TS_START_ROMSTAGE); - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - sio_setup(); - } - - post_code(0x30); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - post_code(0x32); - - winbond_set_clksel_48(SUPERIO_DEV); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n", sysinfo, sysinfo + 1); - printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); - - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); - - update_microcode(val); - - post_code(0x33); - - cpuSetAMDMSR(0); - post_code(0x34); - - amd_ht_init(sysinfo); - post_code(0x35); - - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); - - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); - - /* wait for all the APs core0 started by finalize_node_setup. */ - - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ - - wait_all_core0_started(); -#if CONFIG(LOGICAL_CPUS) - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(bsp_apicid); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); -#endif - - post_code(0x38); - -#if CONFIG(SET_FIDVID) - msr = rdmsr(MSR_COFVID_STS); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", - msr.hi, msr.lo); - - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ - - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - post_code(0x39); - - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } - - post_code(0x3A); - - /* show final fid and vid */ - msr = rdmsr(MSR_COFVID_STS); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", - msr.hi, msr.lo); -#endif - - init_timer(); // Need to use TMICT to synchronize FID/VID - - wants_reset = mcp55_early_setup_x(); - - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - printk(BIOS_INFO, "...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset - shouldn't see this message!!!\n"); - } - - if (wants_reset) - printk(BIOS_DEBUG, "mcp55_early_setup_x wants additional reset!\n"); - - post_code(0x3B); - - /* It's the time to set ctrl in sysinfo now; */ - printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x3D); - - // printk(BIOS_DEBUG, "enable_smbus()\n"); - // enable_smbus(); /* enable in sio_setup */ - - post_code(0x40); - - raminit_amdmct(sysinfo); - - cbmem_initialize_empty(); - post_code(0x41); - - amdmct_cbmem_store_info(sysinfo); - -} - -/** - * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) - * Description: - * This routine is called every time a non-coherent chain is processed. - * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a - * swap list. The first part of the list controls the BUID assignment and the - * second part of the list provides the device to device linking. Device orientation - * can be detected automatically, or explicitly. See documentation for more details. - * - * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially - * based on each device's unit count. - * - * Parameters: - * @param[in] node = The node on which this chain is located - * @param[in] link = The link on the host for this chain - * @param[out] List = supply a pointer to a list - */ -BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) -{ - static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; - /* If the BUID was adjusted in early_ht we need to do the manual override */ - if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { - printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); - if ((node == 0) && (link == 0)) { /* BSP SB link */ - *List = swaplist; - return 1; - } - } - - return 0; -} |