diff options
Diffstat (limited to 'src/mainboard/sunw/ultra40')
| -rw-r--r-- | src/mainboard/sunw/ultra40/Config.lb | 386 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/Options.lb | 278 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/auto.c | 197 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/cache_as_ram_auto.c | 271 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/chip.h | 6 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/cmos.layout | 98 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/failover.c | 110 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/get_bus_conf.c | 271 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/irq_tables.c | 178 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/mainboard.c | 12 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/mptable.c | 236 | ||||
| -rw-r--r-- | src/mainboard/sunw/ultra40/resourcemap.c | 267 |
12 files changed, 2310 insertions, 0 deletions
diff --git a/src/mainboard/sunw/ultra40/Config.lb b/src/mainboard/sunw/ultra40/Config.lb new file mode 100644 index 0000000000..6b41829017 --- /dev/null +++ b/src/mainboard/sunw/ultra40/Config.lb @@ -0,0 +1,386 @@ +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default CONFIG_ROM_STREAM = 1 + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 +default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + +arch i386 end + + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +#needed by irq_tables and mptable and acpi_tables +object get_bus_conf.o + +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +#object reset.o +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end + else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end + +else + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end + + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds +end + +mainboardinit cpu/x86/32bit/entry32.inc + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +if USE_DCACHE_RAM +else + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc +end + +## +## Include an id string (For safe flashing) +## +mainboardinit southbridge/nvidia/ck804/id.inc +ldscript /southbridge/nvidia/ck804/id.lds + +## +## ROMSTRAP table for CK804 +## +if USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/ck804/romstrap.inc + ldscript /southbridge/nvidia/ck804/romstrap.lds +end + + + +if USE_DCACHE_RAM + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + if USE_DCACHE_RAM + else + mainboardinit ./failover.inc + end +end + +## +## Setup RAM +## +if USE_DCACHE_RAM + + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end + +else + # ROMCC + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc + +end + +## +## Include the secondary Configuration files +## +if CONFIG_CHIP_NAME + config chip.h +end + +# sample config for tyan/s2895 +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 #mc0 + device pci 18.0 on + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/smsc/lpc47b397 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.8 on # HW Monitor + io 0x60 = 0x290 + chip drivers/generic/generic # LM95221 CPU temp + device i2c 2b on end + end + chip drivers/generic/generic # EMCT03 + device i2c 54 on end + end + end + device pnp 2e.a on # RT + io 0x60 = 0x400 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 +#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? +# chip drivers/generic/generic #PCIXA Slot1 +# device i2c 50 on end +# end +# chip drivers/generic/generic #PCIXB Slot1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #PCIXB Slot2 +# device i2c 52 on end +# end +# chip drivers/generic/generic #PCI Slot1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #Master CK804 PCI-E +# device i2c 54 on end +# end +# chip drivers/generic/generic #Slave CK804 PCI-E +# device i2c 55 on end +# end + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end + + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" +# register "nic_rom_address" = "0xfff80000" # 64k +# register "raid_rom_address" = "0xfff90000" + register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end # device pci 18.0 + device pci 18.0 on end # Link 1 + device pci 18.0 on + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 6.0 on end # lsi scsi + device pci 6.1 on end + end + end + device pci 1.1 on end + end + end # device pci 18.0 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end # mc0 + + chip northbridge/amd/amdk8 + device pci 19.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 off end # SM + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 off end # IDE + device pci 7.0 off end # SATA 1 + device pci 8.0 off end # SATA 0 + device pci 9.0 off end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 +# register "nic_rom_address" = "0xfff80000" # 64k + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end # device pci 19.0 + + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end # PCI domain + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 off end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end +end #root_complex diff --git a/src/mainboard/sunw/ultra40/Options.lb b/src/mainboard/sunw/ultra40/Options.lb new file mode 100644 index 0000000000..c3f8ba3f8c --- /dev/null +++ b/src/mainboard/sunw/ultra40/Options.lb @@ -0,0 +1,278 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses LINUXBIOS_EXTRA_VERSION +uses _RAMBASE +uses CONFIG_GDB_STUB +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER +uses CONFIG_GDB_STUB +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses K8_HW_MEM_HOLE_SIZEK +uses K8_HT_FREQ_1G_SUPPORT + +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses CONFIG_USE_INIT + +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID + +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses K8_SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + +## ROM_SIZE is the size of boot ROM that this board will use. +#512K bytes +#default ROM_SIZE=524288 + +#1M bytes +default ROM_SIZE=1048576 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +#default FALLBACK_SIZE=131072 +#256K +default FALLBACK_SIZE=0x40000 + +### +### Build options +### + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=11 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=4 +default CONFIG_MAX_PHYSICAL_CPUS=2 +default CONFIG_LOGICAL_CPUS=1 + +#CHIP_NAME ? +#default CONFIG_CHIP_NAME=1 + +#1G memory hole +default K8_HW_MEM_HOLE_SIZEK=0x100000 + +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 + +##HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0x0 + +##real SB Unit ID, default is 0x20, mean dont touch it at last +#default HT_CHAIN_END_UNITID_BASE=0x0 + +#make the SB HT chain on bus 0, default is not (0) +default K8_SB_HT_CHAIN_ON_BUS0=2 + +##only offset for SB chain?, default is yes(1) +default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + +#VGA +default CONFIG_CONSOLE_VGA=1 +default CONFIG_PCI_ROM_RUN=1 + +## +## enable CACHE_AS_RAM specifics +## +default USE_DCACHE_RAM=1 +default DCACHE_RAM_BASE=0xcf000 +default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_INIT=0 + +default ENABLE_APIC_EXT_ID=1 +default APIC_ID_OFFSET=0x10 +default LIFT_BSP_APIC_ID=0 + + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="s2895" +default MAINBOARD_VENDOR="Tyan" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2895 + +### +### LinuxBIOS layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## LinuxBIOS C code runs at this location in RAM +## +default _RAMBASE=0x00004000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_STREAM = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## Disable the gdb stub by default +## +default CONFIG_GDB_STUB=0 + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end diff --git a/src/mainboard/sunw/ultra40/auto.c b/src/mainboard/sunw/ultra40/auto.c new file mode 100644 index 0000000000..bf65cbe6a7 --- /dev/null +++ b/src/mainboard/sunw/ultra40/auto.c @@ -0,0 +1,197 @@ +#define ASSEMBLY 1 + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include <arch/cpu.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include <cpu/amd/model_fxx_rev.h> +//#define K8_HT_FREQ_1G_SUPPORT 1 +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include <cpu/amd/model_fxx_msr.h> +#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" + +#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* full reset */ + outb(0x0a, 0x0cf9); + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); +#if 1 + /* link reset */ + outb(0x02, 0x0cf9); + outb(0x06, 0x0cf9); +#endif +} + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) + +#define SUPERIO_GPIO_IO_BASE 0x400 + +static void sio_gpio_setup(void){ + + unsigned value; + +// lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c + +#if 1 + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); +#endif + +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#define K8_4RANK_DIMM_SUPPORT 1 + +#include "northbridge/amd/amdk8/raminit.c" +#if 0 + #define ENABLE_APIC_EXT_ID 1 + #define APIC_ID_OFFSET 0x10 + #define LIFT_BSP_APIC_ID 0 +#else + #define ENABLE_APIC_EXT_ID 0 +#endif +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +/* maybe does not want the default */ +#include "resourcemap.c" + + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + +#define CK804_NUM 2 +#define CK804B_BUSN 0x80 +#define CK804_USE_NIC 1 +#define CK804_USE_ACI 1 +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" + +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + +#include "southbridge/nvidia/ck804/ck804_early_setup.c" + + +static void main(unsigned long bist) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + + if (bist == 0) { + k8_init_and_stop_secondaries(); + } + + // post_code(0x32); + + lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + sio_gpio_setup(); + + setup_s2895_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + + enable_smbus(); + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + + +} diff --git a/src/mainboard/sunw/ultra40/cache_as_ram_auto.c b/src/mainboard/sunw/ultra40/cache_as_ram_auto.c new file mode 100644 index 0000000000..299f345b71 --- /dev/null +++ b/src/mainboard/sunw/ultra40/cache_as_ram_auto.c @@ -0,0 +1,271 @@ +#define ASSEMBLY 1 +#define __ROMCC__ + + +#define K8_ALLOCATE_IO_RANGE 1 +//#define K8_SCAN_PCI_BUS 1 + + +#define K8_4RANK_DIMM_SUPPORT 1 + +#if CONFIG_LOGICAL_CPUS==1 +#define SET_NB_CFG_54 1 +#endif + + +#include <stdint.h> +#include <device/pci_def.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" + +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/nvidia/ck804/ck804_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" + +#include "northbridge/amd/amdk8/setup_resource_map.c" + +#define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) + +static void memreset_setup(void) +{ +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ +} + +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) + +#define SUPERIO_GPIO_IO_BASE 0x400 + +static void sio_gpio_setup(void){ + + unsigned value; + + /*Enable onboard scsi*/ + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); + +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + + /* tyan does not want the default */ +#include "resourcemap.c" + +#include "cpu/amd/dualcore/dualcore.c" + +#define CK804_NUM 2 +#define CK804_USE_NIC 1 +#define CK804_USE_ACI 1 + +#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" + +//set GPIO to input mode +#define CK804_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + +#include "southbridge/nvidia/ck804/ck804_early_setup_car.c" + +#include "cpu/amd/car/copy_and_run.c" + +#include "cpu/amd/car/post_cache_as_ram.c" + +#include "cpu/amd/model_fxx/init_cpus.c" + + +#if USE_FALLBACK_IMAGE == 1 + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<29)|(1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); +#endif + +} + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + unsigned last_boot_normal_x = last_boot_normal(); + + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ); + + fallback_image: + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#endif + real_main(bist, cpu_init_detectedx); + +} + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr [] = { + (0xa<<3)|0, (0xa<<3)|2, 0, 0, + (0xa<<3)|1, (0xa<<3)|3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + (0xa<<3)|4, (0xa<<3)|6, 0, 0, + (0xa<<3)|5, (0xa<<3)|7, 0, 0, +#endif + }; + + int needs_reset; + unsigned bsp_apicid = 0; + + struct mem_controller ctrl[8]; + unsigned nodes; + + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx); + } + + lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + setup_s2895_resource_map(); + + needs_reset = setup_coherent_ht_domain(); + + wait_all_core0_started(); +#if CONFIG_LOGICAL_CPUS==1 + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + needs_reset |= ht_setup_chains_x(); + + needs_reset |= ck804_early_setup_x(); + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + + enable_smbus(); + + memreset_setup(); + sdram_initialize(nodes, ctrl); + + post_cache_as_ram(); +} diff --git a/src/mainboard/sunw/ultra40/chip.h b/src/mainboard/sunw/ultra40/chip.h new file mode 100644 index 0000000000..350f4a6369 --- /dev/null +++ b/src/mainboard/sunw/ultra40/chip.h @@ -0,0 +1,6 @@ +extern struct chip_operations mainboard_tyan_s2895_ops; + +struct mainboard_tyan_s2895_config { +// int fixup_scsi; +// int fixup_vga; +}; diff --git a/src/mainboard/sunw/ultra40/cmos.layout b/src/mainboard/sunw/ultra40/cmos.layout new file mode 100644 index 0000000000..5eb88b9a5a --- /dev/null +++ b/src/mainboard/sunw/ultra40/cmos.layout @@ -0,0 +1,98 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 DDR400 +8 1 DDR333 +8 2 DDR266 +8 3 DDR200 +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/sunw/ultra40/failover.c b/src/mainboard/sunw/ultra40/failover.c new file mode 100644 index 0000000000..537abd43f4 --- /dev/null +++ b/src/mainboard/sunw/ultra40/failover.c @@ -0,0 +1,110 @@ +#define ASSEMBLY 1 +#include <stdint.h> +#include <device/pci_def.h> + +#include <device/pnp_def.h> + +#include <device/pci_ids.h> +#include <arch/io.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "pc80/mc146818rtc_early.c" + +#include "southbridge/nvidia/ck804/ck804_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "cpu/x86/mtrr/earlymtrr.c" +#include "northbridge/amd/amdk8/reset_test.c" + +#include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" +#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" + +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) + +#define SUPERIO_GPIO_IO_BASE 0x400 + +static void sio_setup(void) +{ + + unsigned value; + uint32_t dword; + uint8_t byte; + + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); + + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<29)|(1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + +#if 1 + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); +#endif + +} + + +#if CONFIG_LOGICAL_CPUS==1 +#include "cpu/amd/dualcore/dualcore_id.c" +#else +#include "cpu/amd/model_fxx/node_id.c" +#endif + + +static unsigned long main(unsigned long bist) +{ + /* Is this a cpu only reset? */ + if (early_mtrr_init_detected()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; +} diff --git a/src/mainboard/sunw/ultra40/get_bus_conf.c b/src/mainboard/sunw/ultra40/get_bus_conf.c new file mode 100644 index 0000000000..3decafb71e --- /dev/null +++ b/src/mainboard/sunw/ultra40/get_bus_conf.c @@ -0,0 +1,271 @@ +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default + unsigned char bus_isa; + unsigned char bus_ck804_0; //1 + unsigned char bus_ck804_1; //2 + unsigned char bus_ck804_2; //3 + unsigned char bus_ck804_3; //4 + unsigned char bus_ck804_4; //5 + unsigned char bus_ck804_5; //6 + unsigned char bus_8131_0; //7 + unsigned char bus_8131_1; //8 + unsigned char bus_8131_2; //9 + unsigned char bus_ck804b_0;//a + unsigned char bus_ck804b_1;//b + unsigned char bus_ck804b_2;//c + unsigned char bus_ck804b_3;//d + unsigned char bus_ck804b_4;//e + unsigned char bus_ck804b_5;//f + unsigned apicid_ck804; + unsigned apicid_8131_1; + unsigned apicid_8131_2; + unsigned apicid_ck804b; + +unsigned sblk; +unsigned pci1234[] = +{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; +unsigned hc_possible_num; +unsigned sbdn; +unsigned hcdn[] = +{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; +unsigned sbdn3; +unsigned sbdnb; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + + unsigned apicid_base; + + device_t dev; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; + + hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + + get_sblk_pci1234(); + + sbdn = (hcdn[0] & 0xff); // first byte of first chain + + sbdn3 = (hcdn[1] & 0xff); + + sbdnb = (hcdn[2] & 0xff); // first byte of second chain + +// bus_ck804_0 = node_link_to_bus(0, sblk); + bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if 0 + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; +#else + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; +#endif + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + + bus_ck804_1 = 2; +#if 0 + bus_ck804_2 = 3; +#else + bus_ck804_5 = 3; +#endif + + } +#if 0 + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); + + bus_ck804_3 = bus_ck804_2+1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); + + bus_ck804_4 = bus_ck804_3+1; + } + + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4+1; + } +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } + else { + printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); + } + + bus_8131_0 = (pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + + bus_8131_1 = bus_8131_0+1; + bus_8131_2 = bus_8131_0+2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); + + bus_8131_2 = bus_8131_1+1; + } + + /* CK804b */ + + if(pci1234[2] & 0xf) { //if the second cpu is installed + bus_ck804b_0 = (pci1234[2]>>16) & 0xff; +#if 0 + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0)); + if (dev) { + bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_2++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); + + bus_ck804b_1 = bus_ck804b_0+1; + bus_ck804b_2 = bus_ck804b_0+2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0)); + if (dev) { + bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_3++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); + + bus_ck804b_2 = bus_ck804b_0+1; + bus_ck804b_3 = bus_ck804b_0+2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0)); + if (dev) { + bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_4++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); + + bus_ck804b_4 = bus_ck804b_3+1; + } + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0)); + if (dev) { + bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_5++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); + + bus_ck804b_5 = bus_ck804b_4+1; + } +#endif + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0)); + if (dev) { + bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + else { + printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); +#if 1 + bus_ck804b_5 = bus_ck804b_4+1; +#endif + + bus_isa = bus_ck804b_5+1; + } + } + + +/*I/O APICs: APIC ID Version State Address*/ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(4); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_ck804 = apicid_base+0; + apicid_8131_1 = apicid_base+1; + apicid_8131_2 = apicid_base+2; + apicid_ck804b = apicid_base+3; + +} diff --git a/src/mainboard/sunw/ultra40/irq_tables.c b/src/mainboard/sunw/ultra40/irq_tables.c new file mode 100644 index 0000000000..5ed428ff9f --- /dev/null +++ b/src/mainboard/sunw/ultra40/irq_tables.c @@ -0,0 +1,178 @@ +/* This file was generated by getpir.c, do not modify! + (but if you do, please run checkpir on it to verify) + Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up + + Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM +*/ +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_ck804b_0;//a +extern unsigned char bus_ck804b_1;//b +extern unsigned char bus_ck804b_2;//c +extern unsigned char bus_ck804b_3;//d +extern unsigned char bus_ck804b_4;//e +extern unsigned char bus_ck804b_5;//f + +extern unsigned pci1234[]; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdnb; + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + + pirq->rtr_bus = bus_ck804_0; + pirq->rtr_devfn = ((sbdn+9)<<3)|0; + + pirq->exclusive_irqs = 0; + + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x005c; + + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; +//pci bridge + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; +//pcix bridge + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + if(pci1234[2] & 0xf) { + //second pci beidge + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); + pirq_info++; slot_num++; + } +#if 0 +//smbus + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//usb + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//audio + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//sata + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot1 PCIE x16 + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; + +//firewire + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot2 pci + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; + +//Slot4 PCIX + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; + +//Slot5 PCIX + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; + +//onboard scsi + write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; + +//Slot6 PCIX + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; +#endif + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) { + pirq->checksum = sum; + } + + printk_info("done.\n"); + + return (unsigned long) pirq_info; + +} diff --git a/src/mainboard/sunw/ultra40/mainboard.c b/src/mainboard/sunw/ultra40/mainboard.c new file mode 100644 index 0000000000..80f14e3fc4 --- /dev/null +++ b/src/mainboard/sunw/ultra40/mainboard.c @@ -0,0 +1,12 @@ +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_sunw_ultra40_ops = { + CHIP_NAME("Sun ultra40 mainboard") +}; +#endif diff --git a/src/mainboard/sunw/ultra40/mptable.c b/src/mainboard/sunw/ultra40/mptable.c new file mode 100644 index 0000000000..a41cbcd12f --- /dev/null +++ b/src/mainboard/sunw/ultra40/mptable.c @@ -0,0 +1,236 @@ +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> + +extern unsigned char bus_isa; +extern unsigned char bus_ck804_0; //1 +extern unsigned char bus_ck804_1; //2 +extern unsigned char bus_ck804_2; //3 +extern unsigned char bus_ck804_3; //4 +extern unsigned char bus_ck804_4; //5 +extern unsigned char bus_ck804_5; //6 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 +extern unsigned char bus_ck804b_0;//a +extern unsigned char bus_ck804b_1;//b +extern unsigned char bus_ck804b_2;//c +extern unsigned char bus_ck804b_3;//d +extern unsigned char bus_ck804b_4;//e +extern unsigned char bus_ck804b_5;//f +extern unsigned apicid_ck804; +extern unsigned apicid_8131_1; +extern unsigned apicid_8131_2; +extern unsigned apicid_ck804b; + +extern unsigned pci1234[]; + +extern unsigned sbdn; +extern unsigned hcdn[]; +extern unsigned sbdn3; +extern unsigned sbdnb; + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2895 "; + struct mp_config_table *mc; + + unsigned char bus_num; + int i; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + +/*Bus: Bus ID Type*/ + /* define bus and isa numbers */ + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); + } + + + dword = 0x0000d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0x00080d7d; + pci_write_config32(dev, 0x84, dword); + + } + + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); + } + } + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); + } + } + + if(pci1234[2] & 0xf) { + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base); + } + + dword = 0x0000d218; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x00000000; + pci_write_config32(dev, 0x80, dword); + + dword = 0x00000d00; + pci_write_config32(dev, 0x84, dword); + + } + } + + } + +/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# +*/ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1); + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_ck804, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_ck804, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_ck804, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_ck804, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_ck804, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_ck804, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_ck804, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_ck804, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); + +// Onboard ck804 smbus + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); +// 10 + +// Onboard ck804 USB 1.1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + +// Onboard ck804 USB 2 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + +// Onboard ck804 Audio + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 + +// Onboard ck804 SATA 0 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + +// Onboard ck804 SATA 1 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + +// Onboard ck804 NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 + +//Slot 1 PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } + +//Onboard Firewire + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19 + +//Slot 2 PCI 32 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); + } + + if(pci1234[2] & 0xf) { +//Onboard ck804b NIC + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 + +//Slot 3 PCIE x16 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); + } + } + +//Channel B of 8131 + +//Slot 4 PCI-X 100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4); + } + +//Slot 5 PCIX 100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29 + } + +//OnBoard LSI SCSI + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30 + } + +//Channel A of 8131 + +//Slot 6 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24 + } + +/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} diff --git a/src/mainboard/sunw/ultra40/resourcemap.c b/src/mainboard/sunw/ultra40/resourcemap.c new file mode 100644 index 0000000000..ea572a5d29 --- /dev/null +++ b/src/mainboard/sunw/ultra40/resourcemap.c @@ -0,0 +1,267 @@ +/* + * needs a different resource map + * + */ + +static void setup_s2895_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00008033, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +} + |