diff options
Diffstat (limited to 'src/mainboard/siemens')
29 files changed, 0 insertions, 5394 deletions
diff --git a/src/mainboard/siemens/sitemp_g1p1/Kconfig b/src/mainboard/siemens/sitemp_g1p1/Kconfig deleted file mode 100644 index d9ad74b212..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/Kconfig +++ /dev/null @@ -1,70 +0,0 @@ -if BOARD_SIEMENS_SITEMP_G1P1 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_S1G1 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_AMD_RS690 - select SOUTHBRIDGE_AMD_SB600 - select SUPERIO_ITE_IT8712F - select HAVE_ACPI_TABLES - select HAVE_MP_TABLE - select HAVE_PIRQ_TABLE - select HAVE_OPTION_TABLE - select HAVE_CMOS_DEFAULT - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select BOARD_ROMSIZE_KB_1024 - select QRANK_DIMM_SUPPORT - select SET_FIDVID - select GFXUMA - select EXT_CONF_SUPPORT - -config MAINBOARD_DIR - string - default siemens/sitemp_g1p1 - -config LINT01_CONVERSION - bool - default y - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MB SITEMP-G1 (U1P0/U1P1)" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config IRQ_SLOT_COUNT - int - default 11 - -config IOMMU - bool - default n - -config HW_SCRUBBER - bool - default n - -config ECC_MEMORY - bool - default n - -endif # BOARD_SIEMENS_SITEMP_G1P1 diff --git a/src/mainboard/siemens/sitemp_g1p1/Kconfig.name b/src/mainboard/siemens/sitemp_g1p1/Kconfig.name deleted file mode 100644 index 4c48ecbc2b..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_SIEMENS_SITEMP_G1P1 - bool "MB SITEMP-G1 (U1P0/U1P1)" diff --git a/src/mainboard/siemens/sitemp_g1p1/Makefile.inc b/src/mainboard/siemens/sitemp_g1p1/Makefile.inc deleted file mode 100644 index e1348ca423..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/Makefile.inc +++ /dev/null @@ -1,18 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## Copyright (C) 2010 Siemens AG, Inc. -## (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ramstage-$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) += int15_func.c diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl deleted file mode 100644 index 44c37bb9a0..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/debug.asl +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - DefinitionBlock ( - "DSDT.AML", - "DSDT", - 0x01, - "XXXXXX", - "XXXXXXXX", - 0x00010001 - ) - { - #include "debug.asl" - } -*/ - -/* -* 0x80: POST_BASE -* 0x3F8: DEBCOM_BASE -* X80: POST_REGION -* P80: PORT80 -* -* CREG: DEBCOM_REGION -* CUAR: DEBCOM_UART -* CDAT: DEBCOM_DATA -* CDLM: DEBCOM_DLM -* DLCR: DEBCOM_LCR -* CMCR: DEBCOM_MCR -* CLSR: DEBCOM_LSR -* -* DEBUG_INIT DINI -*/ - -OperationRegion(X80, SystemIO, 0x80, 1) - Field(X80, ByteAcc, NoLock, Preserve) -{ - P80, 8 -} - -OperationRegion(CREG, SystemIO, 0x3F8, 8) - Field(CREG, ByteAcc, NoLock, Preserve) -{ - CDAT, 8, - CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8 -} - -/* -* DINI -* Initialize the COM port to 115,200 8-N-1 -*/ -Method(DINI) -{ - store(0x83, DLCR) - store(0x01, CDAT) /* 115200 baud (low) */ - store(0x00, CDLM) /* 115200 baud (high) */ - store(0x03, DLCR) /* word=8 stop=1 parity=none */ - store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */ - store(0x00, CDLM) /* turn off interrupts */ -} - -/* -* THRE -* Wait for COM port transmitter holding register to go empty -*/ -Method(THRE) -{ - and(CLSR, 0x20, local0) - while (Lequal(local0, Zero)) { - and(CLSR, 0x20, local0) - } -} - -/* -* OUTX -* Send a single raw character -*/ -Method(OUTX, 1) -{ - THRE() - store(Arg0, CDAT) -} - -/* -* OUTC -* Send a single character, expanding LF into CR/LF -*/ -Method(OUTC, 1) -{ - if (LEqual(Arg0, 0x0a)) { - OUTX(0x0d) - } - OUTX(Arg0) -} - -/* -* DBGN -* Send a single hex nibble -*/ -Method(DBGN, 1) -{ - and(Arg0, 0x0f, Local0) - if (LLess(Local0, 10)) { - add(Local0, 0x30, Local0) - } else { - add(Local0, 0x37, Local0) - } - OUTC(Local0) -} - -/* -* DBGB -* Send a hex byte -*/ -Method(DBGB, 1) -{ - ShiftRight(Arg0, 4, Local0) - DBGN(Local0) - DBGN(Arg0) -} - -/* -* DBGW -* Send a hex word -*/ -Method(DBGW, 1) -{ - ShiftRight(Arg0, 8, Local0) - DBGB(Local0) - DBGB(Arg0) -} - -/* -* DBGD -* Send a hex Dword -*/ -Method(DBGD, 1) -{ - ShiftRight(Arg0, 16, Local0) - DBGW(Local0) - DBGW(Arg0) -} - -/* -* DBGO -* Send either a string or an integer -*/ -Method(DBGO, 1) -{ - /* DINI() */ - if (LEqual(ObjectType(Arg0), 1)) { - if (LGreater(Arg0, 0xffff)) { - DBGD(Arg0) - } else { - if (LGreater(Arg0, 0xff)) { - DBGW(Arg0) - } else { - DBGB(Arg0) - } - } - } else { - Name(BDBG, Buffer(80) {}) - store(Arg0, BDBG) - store(0, Local1) - while (One) { - store(GETC(BDBG, Local1), Local0) - if (LEqual(Local0, 0)) { - return (0) - } - OUTC(Local0) - Increment(Local1) - } - } - return (0) -} - -/* Get a char from a string */ -Method(GETC, 2) -{ - CreateByteField(Arg0, Arg1, DBGC) - return (DBGC) -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl deleted file mode 100644 index fafb0acc2a..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/event.asl +++ /dev/null @@ -1,304 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <southbridge/amd/common/acpi/sleepstates.asl> - -/* Wake status package */ -Name(WKST,Package(){Zero, Zero}) - -/* -* \_PTS - Prepare to Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2, etc -* -* Exit: -* -none- -* -* The _PTS control method is executed at the beginning of the sleep process -* for S1-S5. The sleeping value is passed to the _PTS control method. This -* control method may be executed a relatively long time before entering the -* sleep state and the OS may abort the operation without notification to -* the ACPI driver. This method cannot modify the configuration or power -* state of any device in the system. -*/ -Method(\_PTS, 1) { - /* DBGO("\\_PTS\n") */ - /* DBGO("From S0 to S") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - - /* Don't allow PCIRST# to reset USB */ - if (LEqual(Arg0,3)){ - Store(0,URRE) - } - - /* Clear sleep SMI status flag and enable sleep SMI trap. */ - /*Store(One, CSSM) - Store(One, SSEN)*/ - - /* On older chips, clear PciExpWakeDisEn */ - /*if (LLessEqual(\_SB.SBRI, 0x13)) { - * Store(0,\_SB.PWDE) - *} - */ - - /* Clear wake status structure. */ - Store(0, Index(WKST,0)) - Store(0, Index(WKST,1)) - \_SB.PCI0.SIOS (Arg0) -} /* End Method(\_PTS) */ - -/* -* The following method results in a "not a valid reserved NameSeg" -* warning so I have commented it out for the duration. It isn't -* used, so it could be removed. -* -* -* \_GTS OEM Going To Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -* -* Method(\_GTS, 1) { -* DBGO("\\_GTS\n") -* DBGO("From S0 to S") -* DBGO(Arg0) -* DBGO("\n") -* } -*/ - -/* -* \_BFS OEM Back From Sleep method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* -none- -*/ -Method(\_BFS, 1) { - /* DBGO("\\_BFS\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ -} - -/* -* \_WAK System Wake method -* -* Entry: -* Arg0=The value of the sleeping state S1=1, S2=2 -* -* Exit: -* Return package of 2 DWords -* Dword 1 - Status -* 0x00000000 wake succeeded -* 0x00000001 Wake was signaled but failed due to lack of power -* 0x00000002 Wake was signaled but failed due to thermal condition -* Dword 2 - Power Supply state -* if non-zero the effective S-state the power supply entered -*/ -Method(\_WAK, 1) { - /* DBGO("\\_WAK\n") */ - /* DBGO("From S") */ - /* DBGO(Arg0) */ - /* DBGO(" to S0\n") */ - - /* Re-enable HPET */ - Store(1,HPDE) - - /* Restore PCIRST# so it resets USB */ - if (LEqual(Arg0,3)){ - Store(1,URRE) - } - - /* Arbitrarily clear PciExpWakeStatus */ - Store(PWST, Local1) - Store(Local1, PWST) - - /* if(DeRefOf(Index(WKST,0))) { - * Store(0, Index(WKST,1)) - * } else { - * Store(Arg0, Index(WKST,1)) - * } - */ - \_SB.PCI0.SIOW () - Return(WKST) -} /* End Method(\_WAK) */ - -Scope(\_GPE) { /* Start Scope GPE */ - /* General event 3 */ - Method(_L03) { - /* DBGO("\\_GPE\\_L00\n") */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* Legacy PM event */ - Method(_L08) { - /* DBGO("\\_GPE\\_L08\n") */ - } - - /* Temp warning (TWarn) event */ - Method(_L09) { - /* DBGO("\\_GPE\\_L09\n") */ - Notify (\_TZ.TZ00, 0x80) - } - - /* Reserved */ - /* Method(_L0A) { - * DBGO("\\_GPE\\_L0A\n") - * } - */ - - /* USB controller PME# */ - Method(_L0B) { - /* DBGO("\\_GPE\\_L0B\n") */ - Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* AC97 controller PME# */ - /* Method(_L0C) { - * DBGO("\\_GPE\\_L0C\n") - * } - */ - - /* OtherTherm PME# */ - /* Method(_L0D) { - * DBGO("\\_GPE\\_L0D\n") - * } - */ - - /* GPM9 SCI event - Moved to USB.asl */ - /* Method(_L0E) { - * DBGO("\\_GPE\\_L0E\n") - * } - */ - - /* PCIe HotPlug event */ - /* Method(_L0F) { - * DBGO("\\_GPE\\_L0F\n") - * } - */ - - /* ExtEvent0 SCI event */ - Method(_L10) { - /* DBGO("\\_GPE\\_L10\n") */ - } - - - /* ExtEvent1 SCI event */ - Method(_L11) { - /* DBGO("\\_GPE\\_L11\n") */ - } - - /* PCIe PME# event */ - /* Method(_L12) { - * DBGO("\\_GPE\\_L12\n") - * } - */ - - /* GPM0 SCI event - Moved to USB.asl */ - /* Method(_L13) { - * DBGO("\\_GPE\\_L13\n") - * } - */ - - /* GPM1 SCI event - Moved to USB.asl */ - /* Method(_L14) { - * DBGO("\\_GPE\\_L14\n") - * } - */ - - /* GPM2 SCI event - Moved to USB.asl */ - /* Method(_L15) { - * DBGO("\\_GPE\\_L15\n") - * } - */ - - /* GPM3 SCI event - Moved to USB.asl */ - /* Method(_L16) { - * DBGO("\\_GPE\\_L16\n") - * } - */ - - /* GPM8 SCI event - Moved to USB.asl */ - /* Method(_L17) { - * DBGO("\\_GPE\\_L17\n") - * } - */ - - /* GPIO0 or GEvent8 event */ - Method(_L18) { - /* DBGO("\\_GPE\\_L18\n") */ - Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM4 SCI event - Moved to USB.asl */ - /* Method(_L19) { - * DBGO("\\_GPE\\_L19\n") - * } - */ - - /* GPM5 SCI event - Moved to USB.asl */ - /* Method(_L1A) { - * DBGO("\\_GPE\\_L1A\n") - * } - */ - - /* Azalia SCI event */ - Method(_L1B) { - /* DBGO("\\_GPE\\_L1B\n") */ - Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ - Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ - } - - /* GPM6 SCI event - Reassigned to _L06 */ - /* Method(_L1C) { - * DBGO("\\_GPE\\_L1C\n") - * } - */ - - /* GPM7 SCI event - Reassigned to _L07 */ - /* Method(_L1D) { - * DBGO("\\_GPE\\_L1D\n") - * } - */ - - /* GPIO2 or GPIO66 SCI event */ - /* Method(_L1E) { - * DBGO("\\_GPE\\_L1E\n") - * } - */ - - /* SATA SCI event */ - /* SATA Hot Plug Support -> acpi/sata.asl */ -} /* End Scope GPE */ diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl deleted file mode 100644 index bca300d2f0..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/globutil.asl +++ /dev/null @@ -1,214 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope(\_SB) { - #include "globutil.asl" -} -*/ - -/* string compare functions */ -Method(MIN, 2) -{ - if (LLess(Arg0, Arg1)) { - Return(Arg0) - } else { - Return(Arg1) - } -} - -Method(SLEN, 1) -{ - Store(Arg0, Local0) - Return(Sizeof(Local0)) -} - -Method(S2BF, 1) -{ - Add(SLEN(Arg0), One, Local0) - Name(BUFF, Buffer(Local0) {}) - Store(Arg0, BUFF) - Return(BUFF) -} - -/* Strong string compare. Checks both length and content */ -Method(SCMP, 2) -{ - Store(S2BF(Arg0), Local0) - Store(S2BF(Arg1), Local1) - Store(Zero, Local4) - Store(SLEN(Arg0), Local5) - Store(SLEN(Arg1), Local6) - Store(MIN(Local5, Local6), Local7) - - While(LLess(Local4, Local7)) { - Store(Derefof(Index(Local0, Local4)), Local2) - Store(Derefof(Index(Local1, Local4)), Local3) - if (LGreater(Local2, Local3)) { - Return(One) - } else { - if (LLess(Local2, Local3)) { - Return(Ones) - } - } - Increment(Local4) - } - if (LLess(Local4, Local5)) { - Return(One) - } else { - if (LLess(Local4, Local6)) { - Return(Ones) - } else { - Return(Zero) - } - } -} - -/* Weak string compare. Checks to find Arg1 at beginning of Arg0. -* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on -* Pass. -*/ -Method(WCMP, 2) -{ - Store(S2BF(Arg0), Local0) - Store(S2BF(Arg1), Local1) - if (LLess(SLEN(Arg0), SLEN(Arg1))) { - Return(0) - } - Store(Zero, Local2) - Store(SLEN(Arg1), Local3) - - While(LLess(Local2, Local3)) { - if (LNotEqual(Derefof(Index(Local0, Local2)), - Derefof(Index(Local1, Local2)))) { - Return(0) - } - Increment(Local2) - } - Return(One) -} - -/* ARG0 = IRQ Number(0-15) -* Returns Bit Map -*/ -Method(I2BM, 1) -{ - Store(0, Local0) - if (LNotEqual(ARG0, 0)) { - Store(1, Local1) - ShiftLeft(Local1, ARG0, Local0) - } - Return(Local0) -} -Method (SEQL, 2, Serialized) -{ - Store (SizeOf (Arg0), Local0) - Store (SizeOf (Arg1), Local1) - If (LNot (LEqual (Local0, Local1))) { Return (Zero) } - - Name (BUF0, Buffer (Local0) {}) - Store (Arg0, BUF0) - Name (BUF1, Buffer (Local0) {}) - Store (Arg1, BUF1) - Store (Zero, Local2) - While (LLess (Local2, Local0)) - { - Store (DerefOf (Index (BUF0, Local2)), Local3) - Store (DerefOf (Index (BUF1, Local2)), Local4) - If (LNot (LEqual (Local3, Local4))) { Return (Zero) } - - Increment (Local2) - } - - Return (One) -} - -/* GetMemoryResources(Node, Link) */ -Method (GMEM, 2, NotSerialized) -{ - Name (BUF0, ResourceTemplate () - { - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x00000000, // Address Range Minimum - 0x00000000, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00000001,,, - , AddressRangeMemory, TypeStatic) - }) - CreateDWordField (BUF0, 0x0A, MMIN) - CreateDWordField (BUF0, 0x0E, MMAX) - CreateDWordField (BUF0, 0x16, MLEN) - Store (0x00, Local0) - Store (0x00, Local4) - Store (0x00, Local3) - While (LLess (Local0, 0x10)) - { - /* Get value of the first register */ - Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1) - Increment (Local0) - Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2) - If (LEqual (And (Local1, 0x03), 0x03)) /* Pair enabled? */ - { - If (LEqual (Arg0, And (Local2, 0x07))) /* Node matches? */ - { - /* If Link Matches (or we got passed 0xFF) */ - If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04)))) - { - /* Extract the Base and Limit values */ - Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN) - Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX) - Or (MMAX, 0xFFFF, MMAX) - Subtract (MMAX, MMIN, MLEN) - Increment (MLEN) - - If (Local4) /* I've already done this once */ - { - Concatenate (RTAG (BUF0), Local3, Local5) - Store (Local5, Local3) - } - Else - { - Store (RTAG (BUF0), Local3) - } - - Increment (Local4) - } - } - } - - Increment (Local0) - } - - If (LNot (Local4)) /* No resources for this node and link. */ - { - Store (RTAG (BUF0), Local3) - } - - Return (Local3) -} - -Method (RTAG, 1, NotSerialized) -{ - Store (Arg0, Local0) - Store (SizeOf (Local0), Local1) - Subtract (Local1, 0x02, Local1) - Multiply (Local1, 0x08, Local1) - CreateField (Local0, 0x00, Local1, RETB) - Store (RETB, Local2) - Return (Local2) -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl deleted file mode 100644 index 82e54d8e4e..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/ide.asl +++ /dev/null @@ -1,245 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "ide.asl" - } - } -} -*/ - -/* Some timing tables */ -Name(UDTT, Package(){ /* Udma timing table */ - 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */ -}) - -Name(MDTT, Package(){ /* MWDma timing table */ - 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */ -}) - -Name(POTT, Package(){ /* Pio timing table */ - 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */ -}) - -/* Some timing register value tables */ -Name(MDRT, Package(){ /* MWDma timing register table */ - 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */ -}) - -Name(PORT, Package(){ - 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */ -}) - -OperationRegion(IDEC, PCI_Config, 0x40, 0x20) /* ide control registers */ - Field(IDEC, AnyAcc, NoLock, Preserve) -{ - PPTS, 8, /* 0x40: 0:7 Primary PIO Slave Timing */ - PPTM, 8, /* 0x40: 8:15 Primary PIO Master Timing */ - OFFSET(0x04), - PMTS, 8, /* 0x44: 0:7 Primary MWDMA Slave Timing */ - PMTM, 8, /* 0x44: 7:15 Primary MWDMA Master Timing */ - OFFSET(0x08), - PPCR, 8, /* Primary PIO Control */ - OFFSET(0x0A), - PPMM, 4, /* Primary PIO master Mode */ - PPSM, 4, /* Primary PIO slave Mode */ - OFFSET(0x14), - PDCR, 2, /* Primary UDMA Control */ - OFFSET(0x16), - PDMM, 4, /* Primary UltraDMA Mode */ - PDSM, 4, /* Primary UltraDMA Mode */ -} - -Method(GTTM, 1) /* get total time*/ -{ - Store(And(Arg0, 0x0F), Local0) /* Recovery Width */ - Increment(Local0) - Store(ShiftRight(Arg0, 4), Local1) /* Command Width */ - Increment(Local1) - Return(Multiply(30, Add(Local0, Local1))) -} - -Device(PRIM) -{ - Name (_ADR, 0) - Method(_GTM, 0) - { - NAME(OTBF, Buffer(20) { /* out buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */ - CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(OTBF, 16, BFFG) /* buffer flags */ - - /* Just return if the channel is disabled */ - If(And(PPCR, 0x01)) { /* primary PIO control */ - Return(OTBF) - } - - /* Always tell them independent timing available and IOChannelReady used on both drives */ - Or(BFFG, 0x1A, BFFG) - - Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */ - Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */ - - If(And(PDCR, 0x01)) { /* It's under UDMA mode */ - Or(BFFG, 0x01, BFFG) - Store(DerefOf(Index(UDTT, PDMM)), DSD0) - } - Else { - Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */ - } - - If(And(PDCR, 0x02)) { /* It's under UDMA mode */ - Or(BFFG, 0x04, BFFG) - Store(DerefOf(Index(UDTT, PDSM)), DSD1) - } - Else { - Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */ - } - - Return(OTBF) /* out buffer */ - } /* End Method(_GTM) */ - - Method(_STM, 3, NotSerialized) - { - NAME(INBF, Buffer(20) { /* in buffer */ - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00 - }) - - CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */ - CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */ - CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */ - CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */ - CreateDwordField(INBF, 16, BFFG) /*buffer flag */ - - Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0) - Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */ - Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1) - Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */ - - Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */ - Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */ - - If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0) - Divide(Local0, 7, PDMM,) - Or(PDCR, 0x01, PDCR) - } - Else { - If(LNotEqual(DSD0, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTM) - } - } - - If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */ - Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0) - Divide(Local0, 7, PDSM,) - Or(PDCR, 0x02, PDCR) - } - Else { - If(LNotEqual(DSD1, 0xFFFFFFFF)) { - Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0) - Store(DerefOf(Index(MDRT, Local0)), PMTS) - } - } - /* Return(INBF) */ - } /*End Method(_STM) */ - Device(MST) - { - Name(_ADR, 0) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xA0, CMDA) - Store(0xA0, CMDB) - Store(0xA0, CMDC) - - Or(PPMM, 0x08, POMD) - - If(And(PDCR, 0x01)) { - Or(PDMM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTM), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(MST) */ - - Device(SLV) - { - Name(_ADR, 1) - Method(_GTF) { - Name(CMBF, Buffer(21) { - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 - }) - CreateByteField(CMBF, 1, POMD) - CreateByteField(CMBF, 8, DMMD) - CreateByteField(CMBF, 5, CMDA) - CreateByteField(CMBF, 12, CMDB) - CreateByteField(CMBF, 19, CMDC) - - Store(0xB0, CMDA) - Store(0xB0, CMDB) - Store(0xB0, CMDC) - - Or(PPSM, 0x08, POMD) - - If(And(PDCR, 0x02)) { - Or(PDSM, 0x40, DMMD) - } - Else { - Store(Match - (MDTT, MLE, GTTM(PMTS), - MTR, 0, 0), Local0) - If(LLess(Local0, 3)) { - Or(0x20, Local0, DMMD) - } - } - Return(CMBF) - } - } /* End Device(SLAV) */ -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl deleted file mode 100644 index bda467a2c1..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/platform.asl +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -Name(PCIF, 0) - -Method(_PIC, 1, NotSerialized) -{ - Store(Arg0, PCIF) - If (Arg0) - { - \_SB.PCI0.LPC0.CIRQ() - } -} - -External (\_PR.CP00, DeviceObj) -External (\_PR.CP01, DeviceObj) - -Scope(\_SB) -{ - - Method(_INI, 0) - { - Store (2000, OSYS) - - If (CondRefOf(_OSI)) { - - If (_OSI("Linux")) { - Store (1, LINX) - } - - If (_OSI("Windows 2001")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP1")) { - Store (2001, OSYS) - } - - If (_OSI("Windows 2001 SP2")) { - Store (2002, OSYS) - } - - If (_OSI("Windows 2006")) { - Store (2006, OSYS) - } - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl deleted file mode 100644 index 926188ce05..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/routing.asl +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Routing is in System Bus scope */ -Scope(\_SB) -{ - Name(PR0, Package(){ - /* NB devices */ - /* SB devices */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 1, \_SB.PCI0.LPC0.INTG, 0 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0013FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0013FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0013FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */ - Package(){0x0014FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0014FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0014FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0014FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APR0, Package(){ - /* NB devices in APIC mode */ - /* Bus 0, Dev 0 - RS690 Host Controller */ - /* SB devices in APIC mode */ - /* Bus 0, Dev 18 - SATA controller #1 */ - Package(){0x0012FFFF, 0, 0, 22 }, - - /* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */ - Package(){0x0013FFFF, 0, 0, 16 }, - Package(){0x0013FFFF, 1, 0, 17 }, - Package(){0x0013FFFF, 2, 0, 18 }, - Package(){0x0013FFFF, 3, 0, 19 }, - - /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */ - Package(){0x0014FFFF, 0, 0, 16 }, - Package(){0x0014FFFF, 1, 0, 17 }, - Package(){0x0014FFFF, 2, 0, 18 }, - Package(){0x0014FFFF, 3, 0, 19 }, - }) - - Name(PR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0005FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0005FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0005FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APR1, Package(){ - /* Internal graphics - RS690 VGA, Bus1, Dev5 */ - Package(){0x0005FFFF, 0, 0, 18 }, - Package(){0x0005FFFF, 1, 0, 19 }, - }) - - Name(PS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTB, 0 }, - }) - - Name(APS2, Package(){ - /* The external GFX - Hooked to PCIe slot 2 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTD, 0 }, - }) - - Name(APS4, Package(){ - /* PCIe slot - Hooked to PCIe slot 4 */ - Package(){0x0000FFFF, 0, 0, 16 }, - Package(){0x0000FFFF, 1, 0, 17 }, - Package(){0x0000FFFF, 2, 0, 18 }, - Package(){0x0000FFFF, 3, 0, 19 }, - }) - - Name(PS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTA, 0 }, - }) - - Name(APS5, Package(){ - /* PCIe slot - Hooked to PCIe slot 5 */ - Package(){0x0000FFFF, 0, 0, 17 }, - Package(){0x0000FFFF, 1, 0, 18 }, - Package(){0x0000FFFF, 2, 0, 19 }, - Package(){0x0000FFFF, 3, 0, 16 }, - }) - - Name(PS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTC, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTB, 0 }, - }) - - Name(APS6, Package(){ - /* PCIe slot - Hooked to PCIe slot 6 */ - Package(){0x0000FFFF, 0, 0, 18 }, - Package(){0x0000FFFF, 1, 0, 19 }, - Package(){0x0000FFFF, 2, 0, 16 }, - Package(){0x0000FFFF, 3, 0, 17 }, - }) - - Name(PS7, Package(){ - /* PCIe slot - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, \_SB.PCI0.LPC0.INTD, 0 }, - Package(){0x0000FFFF, 1, \_SB.PCI0.LPC0.INTA, 0 }, - Package(){0x0000FFFF, 2, \_SB.PCI0.LPC0.INTB, 0 }, - Package(){0x0000FFFF, 3, \_SB.PCI0.LPC0.INTC, 0 }, - }) - - Name(APS7, Package(){ - /* PCIe slot - Hooked to PCIe slot 7 */ - Package(){0x0000FFFF, 0, 0, 19 }, - Package(){0x0000FFFF, 1, 0, 16 }, - Package(){0x0000FFFF, 2, 0, 17 }, - Package(){0x0000FFFF, 3, 0, 18 }, - }) - - Name(PCIB, Package(){ - /* PCI slots: slot 1 behind Dev14, Fun4. */ - Package(){0x005FFFF, 0, \_SB.PCI0.LPC0.INTF, 0 }, // Phoenix does it - Package(){0x005FFFF, 1, \_SB.PCI0.LPC0.INTG, 0 }, // Phoenix does it - Package(){0x004FFFF, 0, \_SB.PCI0.LPC0.INTE, 0 }, - Package(){0x004FFFF, 1, \_SB.PCI0.LPC0.INTF, 0 }, - Package(){0x004FFFF, 2, \_SB.PCI0.LPC0.INTG, 0 }, - Package(){0x004FFFF, 3, \_SB.PCI0.LPC0.INTH, 0 }, - }) - - Name(AP2P, Package(){ - /* PCI slots: slot 0 behind Dev14, Fun4. */ - Package(){0x0005FFFF, 0, 0, 21 }, // Phoenix does it - Package(){0x0005FFFF, 1, 0, 22 }, // Phoenix does it - Package(){0x0004FFFF, 0, 0, 20 }, - Package(){0x0004FFFF, 1, 0, 21 }, - Package(){0x0004FFFF, 2, 0, 22 }, - Package(){0x0004FFFF, 3, 0, 23 }, - }) - -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl deleted file mode 100644 index 286d20a700..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/sata.asl +++ /dev/null @@ -1,145 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ - -/* -Scope (_SB) { - Device(PCI0) { - Device(SATA) { - Name(_ADR, 0x00120000) - #include "sata.asl" - } - } -} -*/ - -Name(STTM, Buffer(20) { - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00, - 0x1f, 0x00, 0x00, 0x00 -}) - -/* Start by clearing the PhyRdyChg bits */ -Method(_INI) { - \_GPE._L1F() -} - -Device(PMRY) -{ - Name(_ADR, 0) - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(PMST) { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P0IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - }/* end of PMST */ - - Device(PSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P1IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of PSLA */ -} /* end of PMRY */ - - -Device(SEDY) -{ - Name(_ADR, 1) /* IDE Scondary Channel */ - Method(_GTM, 0x0, NotSerialized) { - Return(STTM) - } - Method(_STM, 0x3, NotSerialized) {} - - Device(SMST) - { - Name(_ADR, 0) - Method(_STA,0) { - if (LGreater(P2IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SMST */ - - Device(SSLA) - { - Name(_ADR, 1) - Method(_STA,0) { - if (LGreater(P3IS,0)) { - return (0x0F) /* sata is visible */ - } - else { - return (0x00) /* sata is missing */ - } - } - } /* end of SSLA */ -} /* end of SEDY */ - -/* SATA Hot Plug Support */ -Scope(\_GPE) { - Method(_L1F,0x0,NotSerialized) { - if (\_SB.P0PR) { - if (LGreater(\_SB.P0IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P0PR) - } - - if (\_SB.P1PR) { - if (LGreater(\_SB.P1IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P1PR) - } - - if (\_SB.P2PR) { - if (LGreater(\_SB.P2IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P2PR) - } - - if (\_SB.P3PR) { - if (LGreater(\_SB.P3IS,0)) { - sleep(32) - } - Notify(\_SB.PCI0.SATA.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */ - store(one, \_SB.P3PR) - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl deleted file mode 100644 index 3de9620c71..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/statdef.asl +++ /dev/null @@ -1,87 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - - -/* Status and notification definitions */ - -#define STA_MISSING 0x00 -#define STA_PRESENT 0x01 -#define STA_ENABLED 0x03 -#define STA_DISABLED 0x09 -#define STA_INVISIBLE 0x0B -#define STA_UNAVAILABLE 0x0D -#define STA_VISIBLE 0x0F - -/* SMBus status codes */ -#define SMB_OK 0x00 -#define SMB_UnknownFail 0x07 -#define SMB_DevAddrNAK 0x10 -#define SMB_DeviceError 0x11 -#define SMB_DevCmdDenied 0x12 -#define SMB_UnknownErr 0x13 -#define SMB_DevAccDenied 0x17 -#define SMB_Timeout 0x18 -#define SMB_HstUnsuppProtocol 0x19 -#define SMB_Busy 0x1A -#define SMB_PktChkError 0x1F - -/* Device Object Notification Values */ -#define NOTIFY_BUS_CHECK 0x00 -#define NOTIFY_DEVICE_CHECK 0x01 -#define NOTIFY_DEVICE_WAKE 0x02 -#define NOTIFY_EJECT_REQUEST 0x03 -#define NOTIFY_DEVICE_CHECK_JR 0x04 -#define NOTIFY_FREQUENCY_ERROR 0x05 -#define NOTIFY_BUS_MODE 0x06 -#define NOTIFY_POWER_FAULT 0x07 -#define NOTIFY_CAPABILITIES 0x08 -#define NOTIFY_PLD_CHECK 0x09 -#define NOTIFY_SLIT_UPDATE 0x0B - -/* Battery Device Notification Values */ -#define NOTIFY_BAT_STATUSCHG 0x80 -#define NOTIFY_BAT_INFOCHG 0x81 -#define NOTIFY_BAT_MAINTDATA 0x82 - -/* Power Source Object Notification Values */ -#define NOTIFY_PWR_STATUSCHG 0x80 - -/* Thermal Zone Object Notification Values */ -#define NOTIFY_TZ_STATUSCHG 0x80 -#define NOTIFY_TZ_TRIPPTCHG 0x81 -#define NOTIFY_TZ_DEVLISTCHG 0x82 -#define NOTIFY_TZ_RELTBLCHG 0x83 - -/* Power Button Notification Values */ -#define NOTIFY_POWER_BUTTON 0x80 - -/* Sleep Button Notification Values */ -#define NOTIFY_SLEEP_BUTTON 0x80 - -/* Lid Notification Values */ -#define NOTIFY_LID_STATUSCHG 0x80 - -/* Processor Device Notification Values */ -#define NOTIFY_CPU_PPCCHG 0x80 -#define NOTIFY_CPU_CSTATECHG 0x81 -#define NOTIFY_CPU_THROTLCHG 0x82 - -/* User Presence Device Notification Values */ -#define NOTIFY_USR_PRESNCECHG 0x80 - -/* Battery Device Notification Values */ -#define NOTIFY_ALS_ILLUMCHG 0x80 -#define NOTIFY_ALS_COLORTMPCHG 0x81 -#define NOTIFY_ALS_RESPCHG 0x82 diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl deleted file mode 100644 index 188c91e57a..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/thermal.asl +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -/* THERMAL */ -Scope(\_TZ) { - Name (KELV, 2732) - Name (THOT, 800) - Name (TCRT, 850) - - ThermalZone(TZ00) { - Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ - /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ - Return(Add(0, 2730)) - } - Method(_AL0,0) { /* Returns package of cooling device to turn on */ - /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ - Return(Package() {\_TZ.TZ00.FAN0}) - } - Device (FAN0) { - Name(_HID, EISAID("PNP0C0B")) - Name(_PR0, Package() {PFN0}) - } - - PowerResource(PFN0,0,0) { - Method(_STA) { - Store(0xF,Local0) - Return(Local0) - } - Method(_ON) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ - } - Method(_OFF) { - /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ - } - } - - // Processors used for active cooling - Method (_PSL, 0, Serialized) - { - If (MPEN) { - Return (Package() {\_PR.CP00, \_PR.CP01}) - } - Return (Package() {\_PR.CP00}) - } - - Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ - Return (Add (THOT, KELV)) - } - Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ - /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ - Return (Add (TCRT, KELV)) - } - Method(_TMP,0) { /* return current temp of this zone */ - Store (SMBR (0x07, 0x4C,, 0x00), Local0) - If (LGreater (Local0, 0x10)) { - Store (Local0, Local1) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400, KELV)) - } - - Store (SMBR (0x07, 0x4C, 0x01), Local0) - /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ - /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ - If (LGreater (Local0, 0x10)) { - If (LGreater (Local0, Local1)) { - Store (Local0, Local1) - } - - Multiply (Local1, 10, Local1) - Return (Add (Local1, KELV)) - } - Else { - Add (Local0, THOT, Local0) - Return (Add (400 , KELV)) - } - } /* end of _TMP */ - } /* end of TZ00 */ -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl b/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl deleted file mode 100644 index 54613a8b41..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi/usb.asl +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* simple name description */ -Method(UCOC, 0) { - Sleep(20) - Store(0x13,CMTI) - Store(0,GPSL) -} - -/* USB Port 0 overcurrent uses Gpm 0 */ -If(LLessEqual(UOM0,9)) { - Scope (\_GPE) { - Method (_L13) { - UCOC() - if(LEqual(GPB0,PLC0)) { - Not(PLC0,PLC0) - Store(PLC0, \_SB_.PT0D) - } - } - } -} - -/* USB Port 1 overcurrent uses Gpm 1 */ -If (LLessEqual(UOM1,9)) { - Scope (\_GPE) { - Method (_L14) { - UCOC() - if (LEqual(GPB1,PLC1)) { - Not(PLC1,PLC1) - Store(PLC1, \_SB_.PT1D) - } - } - } -} - -/* USB Port 2 overcurrent uses Gpm 2 */ -If (LLessEqual(UOM2,9)) { - Scope (\_GPE) { - Method (_L15) { - UCOC() - if (LEqual(GPB2,PLC2)) { - Not(PLC2,PLC2) - Store(PLC2, \_SB_.PT2D) - } - } - } -} - -/* USB Port 3 overcurrent uses Gpm 3 */ -If (LLessEqual(UOM3,9)) { - Scope (\_GPE) { - Method (_L16) { - UCOC() - if (LEqual(GPB3,PLC3)) { - Not(PLC3,PLC3) - Store(PLC3, \_SB_.PT3D) - } - } - } -} - -/* USB Port 4 overcurrent uses Gpm 4 */ -If (LLessEqual(UOM4,9)) { - Scope (\_GPE) { - Method (_L19) { - UCOC() - if (LEqual(GPB4,PLC4)) { - Not(PLC4,PLC4) - Store(PLC4, \_SB_.PT4D) - } - } - } -} - -/* USB Port 5 overcurrent uses Gpm 5 */ -If (LLessEqual(UOM5,9)) { - Scope (\_GPE) { - Method (_L1A) { - UCOC() - if (LEqual(GPB5,PLC5)) { - Not(PLC5,PLC5) - Store(PLC5, \_SB_.PT5D) - } - } - } -} - -/* USB Port 6 overcurrent uses Gpm 6 */ -If (LLessEqual(UOM6,9)) { - Scope (\_GPE) { - /* Method (_L1C) { */ - Method (_L06) { - UCOC() - if (LEqual(GPB6,PLC6)) { - Not(PLC6,PLC6) - Store(PLC6, \_SB_.PT6D) - } - } - } -} - -/* USB Port 7 overcurrent uses Gpm 7 */ -If (LLessEqual(UOM7,9)) { - Scope (\_GPE) { - /* Method (_L1D) { */ - Method (_L07) { - UCOC() - if (LEqual(GPB7,PLC7)) { - Not(PLC7,PLC7) - Store(PLC7, \_SB_.PT7D) - } - } - } -} - -/* USB Port 8 overcurrent uses Gpm 8 */ -If (LLessEqual(UOM8,9)) { - Scope (\_GPE) { - Method (_L17) { - if (LEqual(G8IS,PLC8)) { - Not(PLC8,PLC8) - Store(PLC8, \_SB_.PT8D) - } - } - } -} - -/* USB Port 9 overcurrent uses Gpm 9 */ -If (LLessEqual(UOM9,9)) { - Scope (\_GPE) { - Method (_L0E) { - if (LEqual(G9IS,0)) { - Store(1,\_SB_.PT9D) - } - } - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c b/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c deleted file mode 100644 index 0ced54b457..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/acpi_tables.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <compiler.h> -#include <console/console.h> -#include <string.h> -#include <arch/acpi.h> -#include <arch/ioapic.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <../../../northbridge/amd/amdk8/acpi.h> -#include <arch/cpu.h> -#include <cpu/amd/powernow.h> -#include <southbridge/amd/rs690/rs690.h> -#include "mainboard.h" -#include <cbmem.h> - -#define GLOBAL_VARS_SIZE 0x100 - -typedef struct { - /* Miscellaneous */ - u16 osys; - u16 linx; - u32 pcba; - u8 mpen; - u8 reserv[247]; -} __packed global_vars_t; - -static void acpi_write_gvars(global_vars_t *gvars) -{ - struct device *dev; - struct resource *res; - - memset((void *)gvars, 0, GLOBAL_VARS_SIZE); - - gvars->pcba = EXT_CONF_BASE_ADDRESS; - dev = dev_find_slot(0, PCI_DEVFN(0,0)); - res = probe_resource(dev, 0x1C); - if( res ) - gvars->pcba = res->base; - - gvars->mpen = 1; -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write SB600 IOAPIC, only one */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2, - IO_APIC_ADDR, 0); -#if !IS_ENABLED(CONFIG_LINT01_CONVERSION) - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); -#else - /* 0: mean bus 0--->ISA */ - /* 0: PIC 0 */ - /* 2: APIC 2 */ - /* 5 mean: 0101 --> Edge-triggered, Active high */ - - /* create all subtables for processors */ - current = acpi_create_madt_lapic_nmis(current, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - /* 1: LINT1 connect to NMI */ - set_nbcfg_enable_bits(dev_find_slot(0, PCI_DEVFN(0x18, 0)), 0x68, 1 << 16, 1 << 16); // Local Interrupt Conversion Enable -#endif - return current; -} - -void mainboard_inject_dsdt(struct device *device) -{ - global_vars_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, GLOBAL_VARS_SIZE); - - if (gnvs) { - memset(gnvs, 0, sizeof(*gnvs)); - acpi_write_gvars(gnvs); - - /* Add it to SSDT. */ - acpigen_write_scope("\\"); - acpigen_write_name_dword("NVSA", (u32) gnvs); - acpigen_pop_len(); - } -} diff --git a/src/mainboard/siemens/sitemp_g1p1/board_info.txt b/src/mainboard/siemens/sitemp_g1p1/board_info.txt deleted file mode 100644 index 7680e6f854..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/board_info.txt +++ /dev/null @@ -1 +0,0 @@ -Category: half diff --git a/src/mainboard/siemens/sitemp_g1p1/cmos.default b/src/mainboard/siemens/sitemp_g1p1/cmos.default deleted file mode 100644 index 3440a20c10..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/cmos.default +++ /dev/null @@ -1,23 +0,0 @@ -boot_option=Fallback -cmos_defaults_loaded=Yes -debug_level=Spew -power_on_after_fail=Enable -nmi=Enable -sata_mode=AHCI -boot_devices='' -multi_core=Enable -cpu_fan_control=Disable -chassis_fan_control=Disable -cpu_fan_polarity=Active_high -chassis_fan_polarity=Active_high -cpu_t_min=45 -cpu_t_max=65 -cpu_dutycycle_min=30% -cpu_dutycycle_max=90% -chassis_t_min=40 -chassis_t_max=70 -chassis_dutycycle_min=25% -chassis_dutycycle_max=90% -lcd_panel_id=no_panel -boot_delay=off -boot_default=0 diff --git a/src/mainboard/siemens/sitemp_g1p1/cmos.layout b/src/mainboard/siemens/sitemp_g1p1/cmos.layout deleted file mode 100644 index f7571cc309..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/cmos.layout +++ /dev/null @@ -1,172 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 Advanced Micro Devices, Inc. -## Copyright (C) 2010 Siemens AG, Inc. -## (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## -## - -entries - -# ======================================================= -# ======================================================= -# ======================================================== -0 384 r 0 reserved_memory -# ======================================================== -#384 1 r 0 unused -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -#386 1 r 1 unused -387 1 e 16 cmos_defaults_loaded -388 4 h 0 reboot_counter -#392 3 r 0 unused -#395 1 r 1 unused -#396 1 r 1 unused -#397 2 r 8 unused -399 1 e 2 multi_core -#400 8 r 18 reserved -408 4 e 6 debug_level -412 1 e 1 power_on_after_fail -#413 1 r 1 unused -414 1 e 17 sata_mode -415 1 e 1 nmi -416 1 e 1 cpu_fan_control -417 1 e 1 chassis_fan_control -418 1 e 13 cpu_fan_polarity -419 1 e 13 chassis_fan_polarity -420 4 e 14 cpu_t_min -424 4 e 14 cpu_t_max -428 4 e 15 cpu_dutycycle_min -432 4 e 15 cpu_dutycycle_max - -436 4 e 14 chassis_t_min -440 4 e 14 chassis_t_max - -444 4 e 15 chassis_dutycycle_min - -448 4 e 15 chassis_dutycycle_max - -#452 4 r 9 unused - -456 4 e 10 boot_delay -460 4 e 11 lcd_panel_id -#=========================================================== -464 512 s 0 boot_devices -976 8 h 0 boot_default -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 4 Warning -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -# boot delay -10 0 off -10 1 1s -10 2 2s -10 3 3s -10 4 4s -10 5 5s -10 6 6s -10 7 7s -10 8 8s -10 9 9s -10 10 10s -# LCD Panel ID -11 0 no_panel -11 1 1024x768_65MHz_Dual -11 2 1920x1200_162MHz -11 3 1600x1200_162MHz -11 4 1024x768_65MHz -11 5 1400x1050_108MHz -11 6 1680x1050_119MHz -11 7 2048x1536_164MHz -11 8 1280x1024_108MHz -11 9 1366x768_86MHz_chimei_V32B1L01 -# TV Standard -#12 0 NTSC -#12 1 PAL -#12 2 PALM -#12 3 PAL60 -#12 4 NTSCJ -#12 5 PALCN -#12 6 PALN -#12 9 SCART-RGB -#12 15 no_tv -# CPU/Chassis FAN Control: polarity -13 0 Active_high -13 1 Active_low -# Temperature °C -14 0 30 -14 1 35 -14 2 40 -14 3 45 -14 4 50 -14 5 55 -14 6 60 -14 7 65 -14 8 70 -14 9 75 -14 10 80 -14 11 85 -14 12 90 -14 13 95 -14 14 100 -# Dutycycle % -15 0 25% -15 1 30% -15 2 35% -15 3 40% -15 4 45% -15 5 50% -15 6 55% -15 7 60% -15 8 65% -15 9 70% -15 10 75% -15 11 80% -15 12 85% -15 13 90% -15 14 95% -15 15 100% -# cmos_defaults_loaded -16 0 No -16 1 Yes -# sata_mode -17 0 AHCI -17 1 IDE -# reserved -18 32 2000 -# ============================== -checksums - -checksum 392 983 984 diff --git a/src/mainboard/siemens/sitemp_g1p1/devicetree.cb b/src/mainboard/siemens/sitemp_g1p1/devicetree.cb deleted file mode 100644 index e47703f738..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/devicetree.cb +++ /dev/null @@ -1,134 +0,0 @@ -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_S1G1 - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x110a 0x4076 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on # Northbridge configuration space (0x7910) - end - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - device pci 5.0 on # Internal Graphics 0x791F - end - device pci 5.2 on # - end - end - device pci 2.0 on # PCIE P2P bridge 0x7913 (external GFX-port0) - end - device pci 3.0 off # PCIE P2P bridge 0x791b (external GFX-port1) - end - device pci 4.0 on # PCIE P2P bridge port 0 (0x7914) - end - device pci 5.0 on # PCIE P2P bridge port 1 (0x7915) - end - device pci 6.0 on # PCIE P2P bridge port 2 (0x7916) - end - device pci 7.0 on # PCIE P2P bridge port 3 (0x7917) - end - device pci 8.0 off # NB/SB Link P2P bridge - end - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "1" # needed for DVI output, but this results in a conflict if PLX installed ! - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" # 4 (0x8) if PLX installed - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e -# register "ide0_enable" = "1" -# register "sata0_enable" = "1" - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #domain -end #northbridge/amd/amdk8/root_complex diff --git a/src/mainboard/siemens/sitemp_g1p1/dsdt.asl b/src/mainboard/siemens/sitemp_g1p1/dsdt.asl deleted file mode 100644 index 121aaf9edd..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/dsdt.asl +++ /dev/null @@ -1,1211 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <arch/ioapic.h> -#include <cpu/x86/lapic_def.h> -#include <southbridge/amd/sb600/sb600.h> - -DefinitionBlock ("DSDT.aml", "DSDT", 2, "SIEMEN", "SITEMP ", 0x20101005) -{ - /* Data to be patched by the BIOS during POST */ - /* Memory related values */ - Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ - - /* USB overcurrent mapping pins. */ - Name(UOM0, 0) - Name(UOM1, 2) - Name(UOM2, 0) - Name(UOM3, 7) - Name(UOM4, 2) - Name(UOM5, 2) - Name(UOM6, 6) - Name(UOM7, 2) - Name(UOM8, 6) - Name(UOM9, 6) - - Name(DSEN, 1) // Display Output Switching Enable - // Power notification - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - SINT, 0x00000008, /* Index 4 */ - Offset(0x09), - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - /* PCI Error control register */ - OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) - Field(PERC, ByteAcc, NoLock, Preserve) { - SENS, 0x00000001, - PENS, 0x00000001, - SENE, 0x00000001, - PENE, 0x00000001, - } - - /* Client Management index/data registers */ - OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) - Field(CMT, ByteAcc, NoLock, Preserve) { - CMTI, 8, - /* Client Management Data register */ - G64E, 1, - G64O, 1, - G32O, 2, - , 2, - GPSL, 2, - } - - /* GPM Port register */ - OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) - Field(GPT, ByteAcc, NoLock, Preserve) { - GPB0,1, - GPB1,1, - GPB2,1, - GPB3,1, - GPB4,1, - GPB5,1, - GPB6,1, - GPB7,1, - } - - /* Flash ROM program enable register */ - OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) - Field(FRE, ByteAcc, NoLock, Preserve) { - , 0x00000006, - FLRE, 0x00000001, - } - - /* PM2 index/data registers */ - OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) - Field(PM2R, ByteAcc, NoLock, Preserve) { - PM2I, 0x00000008, - PM2D, 0x00000008, - } - - /* Power Management I/O registers */ - OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) - Field(PIOR, ByteAcc, NoLock, Preserve) { - PIOI, 0x00000008, - PIOD, 0x00000008, - } - IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { - Offset(0x00), /* MiscControl */ - , 1, - T1EE, 1, - T2EE, 1, - Offset(0x01), /* MiscStatus */ - , 1, - T1E, 1, - T2E, 1, - Offset(0x04), /* SmiWakeUpEventEnable3 */ - , 7, - SSEN, 1, - Offset(0x07), /* SmiWakeUpEventStatus3 */ - , 7, - CSSM, 1, - Offset(0x10), /* AcpiEnable */ - , 6, - PWDE, 1, - Offset(0x1C), /* ProgramIoEnable */ - , 3, - MKME, 1, - IO3E, 1, - IO2E, 1, - IO1E, 1, - IO0E, 1, - Offset(0x1D), /* IOMonitorStatus */ - , 3, - MKMS, 1, - IO3S, 1, - IO2S, 1, - IO1S, 1, - IO0S,1, - Offset(0x20), /* AcpiPmEvtBlk */ - APEB, 16, - Offset(0x36), /* GEvtLevelConfig */ - , 6, - ELC6, 1, - ELC7, 1, - Offset(0x37), /* GPMLevelConfig0 */ - , 3, - PLC0, 1, - PLC1, 1, - PLC2, 1, - PLC3, 1, - PLC8, 1, - Offset(0x38), /* GPMLevelConfig1 */ - , 1, - PLC4, 1, - PLC5, 1, - , 1, - PLC6, 1, - PLC7, 1, - Offset(0x3B), /* PMEStatus1 */ - GP0S, 1, - GM4S, 1, - GM5S, 1, - APS, 1, - GM6S, 1, - GM7S, 1, - GP2S, 1, - STSS, 1, - Offset(0x55), /* SoftPciRst */ - SPRE, 1, - , 1, - , 1, - PNAT, 1, - PWMK, 1, - PWNS, 1, - - /* Offset(0x61), */ /* Options_1 */ - /* ,7, */ - /* R617,1, */ - - Offset(0x65), /* UsbPMControl */ - , 4, - URRE, 1, - Offset(0x68), /* MiscEnable68 */ - , 3, - TMTE, 1, - , 1, - Offset(0x92), /* GEVENTIN */ - , 7, - E7IS, 1, - Offset(0x96), /* GPM98IN */ - G8IS, 1, - G9IS, 1, - Offset(0x9A), /* EnhanceControl */ - ,7, - HPDE, 1, - Offset(0xA8), /* PIO7654Enable */ - IO4E, 1, - IO5E, 1, - IO6E, 1, - IO7E, 1, - Offset(0xA9), /* PIO7654Status */ - IO4S, 1, - IO5S, 1, - IO6S, 1, - IO7S, 1, - } - - /* PM1 Event Block - * First word is PM1_Status, Second word is PM1_Enable - */ - OperationRegion(P1EB, SystemIO, APEB, 0x04) - Field(P1EB, ByteAcc, NoLock, Preserve) { - TMST, 1, - , 3, - BMST, 1, - GBST, 1, - Offset(0x01), - PBST, 1, - , 1, - RTST, 1, - , 3, - PWST, 1, - SPWS, 1, - Offset(0x02), - TMEN, 1, - , 4, - GBEN, 1, - Offset(0x03), - PBEN, 1, - , 1, - RTEN, 1, - , 3, - PWDA, 1, - } - - External(\NVSA) - - OperationRegion (GVAR, SystemMemory, \NVSA, 0x100) - Field (GVAR, ByteAcc, NoLock, Preserve) - { - Offset (0x00), - OSYS, 16, - LINX, 16, - PCBA, 32, - MPEN, 8 - } - - Name (IOLM,0xe0000000) - -#include "acpi/platform.asl" - - Scope(\_SB) { - - /* PCIe Configuration Space for 16 busses */ - OperationRegion(PCFG, SystemMemory, PCBA, 0x2000000) /* PCIe reserved space for 31 busses */ - Field(PCFG, ByteAcc, NoLock, Preserve) { - Offset(0x00090024), /* Byte offset to SATA BAR5 register 24h - Bus 0, Device 18, Function 0 */ - STB5, 32, - Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ - PT0D, 1, - PT1D, 1, - PT2D, 1, - PT3D, 1, - PT4D, 1, - PT5D, 1, - PT6D, 1, - PT7D, 1, - PT8D, 1, - PT9D, 1, - Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ - SBIE, 1, - SBME, 1, - Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ - SBRI, 8, - Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ - SBB1, 32, - Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ - ,14, - P92E, 1, /* Port92 decode enable */ - } - - OperationRegion(BAR5, SystemMemory, STB5, 0x1000) - Field(BAR5, AnyAcc, NoLock, Preserve) - { - /* Port 0 */ - Offset(0x120), /* Port 0 Task file status */ - P0ER, 1, - , 2, - P0DQ, 1, - , 3, - P0BY, 1, - Offset(0x128), /* Port 0 Serial ATA status */ - P0DD, 4, - , 4, - P0IS, 4, - Offset(0x12C), /* Port 0 Serial ATA control */ - P0DI, 4, - Offset(0x130), /* Port 0 Serial ATA error */ - , 16, - P0PR, 1, - - /* Port 1 */ - offset(0x1A0), /* Port 1 Task file status */ - P1ER, 1, - , 2, - P1DQ, 1, - , 3, - P1BY, 1, - Offset(0x1A8), /* Port 1 Serial ATA status */ - P1DD, 4, - , 4, - P1IS, 4, - Offset(0x1AC), /* Port 1 Serial ATA control */ - P1DI, 4, - Offset(0x1B0), /* Port 1 Serial ATA error */ - , 16, - P1PR, 1, - - /* Port 2 */ - Offset(0x220), /* Port 2 Task file status */ - P2ER, 1, - , 2, - P2DQ, 1, - , 3, - P2BY, 1, - Offset(0x228), /* Port 2 Serial ATA status */ - P2DD, 4, - , 4, - P2IS, 4, - Offset(0x22C), /* Port 2 Serial ATA control */ - P2DI, 4, - Offset(0x230), /* Port 2 Serial ATA error */ - , 16, - P2PR, 1, - - /* Port 3 */ - Offset(0x2A0), /* Port 3 Task file status */ - P3ER, 1, - , 2, - P3DQ, 1, - , 3, - P3BY, 1, - Offset(0x2A8), /* Port 3 Serial ATA status */ - P3DD, 4, - , 4, - P3IS, 4, - Offset(0x2AC), /* Port 3 Serial ATA control */ - P3DI, 4, - Offset(0x2B0), /* Port 3 Serial ATA error */ - , 16, - P3PR, 1, - } - } -#include "acpi/event.asl" -#include "acpi/routing.asl" -#include "acpi/usb.asl" - - /* System Bus */ - Scope(\_SB) - { - /* Start \_SB scope */ - -#include "acpi/globutil.asl" - - Device(PWRB) { /* Start Power button device */ - Name(_HID, EISAID("PNP0C0C")) - Name(_UID, 0xAA) - Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ - Name(_STA, 0x0B) /* sata is invisible */ - } - /* _SB.PCI0 */ - /* Note: Only need HID on Primary Bus */ - Device(PCI0) - { - External (MMIO) - External (TOM1) - External (TOM2) - - Name(_HID, EISAID("PNP0A03")) - Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ - - Method(_BBN, 0) { /* Bus number = 0 */ - Return(0) - } - - Method(_STA, 0) { - /* DBGO("\\_SB\\PCI0\\_STA\n") */ - Return(0x0B) /* Status is visible */ - } - - Device (MEMR) - { - Name (_HID, EisaId ("PNP0C02")) - Name (MEM1, ResourceTemplate () - { - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x00000000, // Address Length - _Y1A) - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x00000000, // Address Length - _Y1B) - }) - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1A._BAS, MB01) - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1A._LEN, ML01) - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1B._BAS, MB02) - CreateDWordField (MEM1, \_SB.PCI0.MEMR._Y1B._LEN, ML02) - If (PCIF) - { - Store (IO_APIC_ADDR, MB01) - Store (LOCAL_APIC_ADDR, MB02) - Store (0x1000, ML01) - Store (0x1000, ML02) - } - - Return (MEM1) - } - } - - Method(_PRT,0) { - If(PCIF){ Return(APR0) } /* APIC mode */ - Return (PR0) /* PIC Mode */ - } /* end _PRT */ - - OperationRegion (BAR1, PCI_Config, 0x14, 0x04) - Field (BAR1, ByteAcc, NoLock, Preserve) - { - Z009, 32 - } - - /* Describe the Northbridge devices */ - Device(AMRT) { - Name(_ADR, 0x00000000) - } /* end AMRT */ - - /* The internal GFX bridge */ - Device(AGPB) { - Name(_ADR, 0x00010000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { Return (APR1) } - - Device (VGA) - { - Name (_ADR, 0x00050000) - Method (_DOS, 1) - { - /* Windows 2000 and Windows XP call _DOS to enable/disable - * Display Output Switching during init and while a switch - * is already active - */ - Store (And(Arg0, 7), DSEN) - } - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - } - } /* end AGPB */ - - /* The external GFX bridge */ - Device(PBR2) { - Name(_ADR, 0x00020000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS2) } /* APIC mode */ - Return (PS2) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR2 */ - - /* Dev3 is also an external GFX bridge */ - - Device(PBR4) { - Name(_ADR, 0x00040000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS4) } /* APIC mode */ - Return (PS4) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR4 */ - - Device(PBR5) { - Name(_ADR, 0x00050000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS5) } /* APIC mode */ - Return (PS5) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR5 */ - - Device(PBR6) { - Name(_ADR, 0x00060000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS6) } /* APIC mode */ - Return (PS6) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR6 */ - - /* The onboard EtherNet chip */ - Device(PBR7) { - Name(_ADR, 0x00070000) - Name(_PRW, Package() {0x18, 4}) - Method(_PRT,0) { - If(PCIF){ Return(APS7) } /* APIC mode */ - Return (PS7) /* PIC Mode */ - } /* end _PRT */ - } /* end PBR7 */ - - /* PCI slot 1 */ - Device(PIBR) { - Name(_ADR, 0x00140004) - Name(_PRW, Package() {4, 5}) // Phoenix doeas it so - Method(_PRT, 0) { - If(PCIF){ Return(AP2P) } /* APIC Mode */ - Return (PCIB) /* PIC Mode */ - } - } - - /* Describe the Southbridge devices */ - Device(SATA) { - Name(_ADR, 0x00120000) -#include "acpi/sata.asl" - } /* end SATA */ - - Device(UOH1) { - Name(_ADR, 0x00130000) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH1 */ - - Device(UOH2) { - Name(_ADR, 0x00130001) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH2 */ - - Device(UOH3) { - Name(_ADR, 0x00130002) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH3 */ - - Device(UOH4) { - Name(_ADR, 0x00130003) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH4 */ - - Device(UOH5) { - Name(_ADR, 0x00130004) - Name(_PRW, Package() {0x0B, 3}) - } /* end UOH5 */ - - Device(UEH1) { - Name(_ADR, 0x00130005) - Name(_PRW, Package() {0x0B, 3}) - } /* end UEH1 */ - - Device(SBUS) { - Name(_ADR, 0x00140000) - } /* end SBUS */ - - /* Primary (and only) IDE channel */ - Device(IDEC) { - Name(_ADR, 0x00140001) - #include "acpi/ide.asl" - } /* end IDEC */ - - Device(AZHD) { - Name(_ADR, 0x00140002) - OperationRegion(AZPD, PCI_Config, 0x00, 0x100) - Field(AZPD, AnyAcc, NoLock, Preserve) { - offset (0x42), - NSDI, 1, - NSDO, 1, - NSEN, 1, - offset (0x44), - IPCR, 4, - offset (0x54), - PWST, 2, - , 6, - PMEB, 1, - , 6, - PMST, 1, - offset (0x62), - MMCR, 1, - offset (0x64), - MMLA, 32, - offset (0x68), - MMHA, 32, - offset (0x6C), - MMDT, 16, - } - - Method(_INI) { - If(LEqual(LINX,1)){ /* If we are running Linux */ - Store(zero, NSEN) - Store(one, NSDO) - Store(one, NSDI) - } - } - } /* end AZHD */ - - Device(LPC0) - { - Name (_ADR, 0x00140003) - Mutex (PSMX, 0x00) - - /* PIC IRQ mapping registers, C00h-C01h */ - OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) - Field(PRQM, ByteAcc, NoLock, Preserve) { - PRQI, 0x00000008, - PRQD, 0x00000008, /* Offset: 1h */ - } - - IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { - PINA, 0x00000008, /* Index 0 */ - PINB, 0x00000008, /* Index 1 */ - PINC, 0x00000008, /* Index 2 */ - PIND, 0x00000008, /* Index 3 */ - SINT, 0x00000008, /* Index 4 */ - Offset(0x09), - PINE, 0x00000008, /* Index 9 */ - PINF, 0x00000008, /* Index A */ - PING, 0x00000008, /* Index B */ - PINH, 0x00000008, /* Index C */ - } - - Method(CIRQ, 0x00, NotSerialized) - { - Store(0, PINA) - Store(0, PINB) - Store(0, PINC) - Store(0, PIND) - Store(0, SINT) - Store(0, PINE) - Store(0, PINF) - Store(0, PING) - Store(0, PINH) - } - - Name(IRQB, ResourceTemplate(){ - IRQ(Level,ActiveLow,Shared){10,11} - }) - - Name(IRQP, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7} - }) - - Name(PITF, ResourceTemplate(){ - IRQ(Level,ActiveLow,Exclusive){9} - }) - - Device(INTA) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 1) - - Method(_STA, 0) { - if (PINA) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTA._STA) */ - - Method(_DIS ,0) { - Store(0, PINA) - } /* End Method(_SB.INTA._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTA._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINA, IRQ0) - Return(Local0) - } /* Method(_SB.INTA._CRS) */ - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement (Local0) - Store(Local0, PINA) - } /* End Method(_SB.INTA._SRS) */ - } /* End Device(INTA) */ - - Device(INTB) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 2) - - Method(_STA, 0) { - if (PINB) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTB._STA) */ - - Method(_DIS ,0) { - Store(0, PINB) - } /* End Method(_SB.INTB._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTB._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINB, IRQ0) - Return(Local0) - } /* Method(_SB.INTB._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINB) - } /* End Method(_SB.INTB._SRS) */ - } /* End Device(INTB) */ - - Device(INTC) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 3) - - Method(_STA, 0) { - if (PINC) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTC._STA) */ - - Method(_DIS ,0) { - Store(0, PINC) - } /* End Method(_SB.INTC._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTC._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINC, IRQ0) - Return(Local0) - } /* Method(_SB.INTC._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINC) - } /* End Method(_SB.INTC._SRS) */ - } /* End Device(INTC) */ - - Device(INTD) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - - Method(_STA, 0) { - if (PIND) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTD._STA) */ - - Method(_DIS ,0) { - Store(0, PIND) - } /* End Method(_SB.INTD._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTD._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PIND, IRQ0) - Return(Local0) - } /* Method(_SB.INTD._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PIND) - } /* End Method(_SB.INTD._SRS) */ - } /* End Device(INTD) */ - - Device(INTE) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 5) - - Method(_STA, 0) { - if (PINE) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTE._STA) */ - - Method(_DIS ,0) { - Store(0, PINE) - } /* End Method(_SB.INTE._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINE, IRQ0) - Return(Local0) - } /* Method(_SB.INTE._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINE) - } /* End Method(_SB.INTE._SRS) */ - } /* End Device(INTE) */ - - Device(INTF) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 6) - - Method(_STA, 0) { - if (PINF) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTF._STA) */ - - Method(_DIS ,0) { - Store(0, PINF) - } /* End Method(_SB.INTF._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(PITF) - } /* Method(_SB.INTF._PRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINF, IRQ0) - Return(Local0) - } /* Method(_SB.INTF._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINF) - } /* End Method(_SB.INTF._SRS) */ - } /* End Device(INTF) */ - - Device(INTG) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 7) - - Method(_STA, 0) { - if (PING) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTG._STA) */ - - Method(_DIS ,0) { - Store(0, PING) - } /* End Method(_SB.INTG._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTG._CRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PING, IRQ0) - Return(Local0) - } /* Method(_SB.INTG._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PING) - } /* End Method(_SB.INTG._SRS) */ - } /* End Device(INTG) */ - - Device(INTH) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 8) - - Method(_STA, 0) { - if (PINH) { - Return(0x0B) /* sata is invisible */ - } else { - Return(0x09) /* sata is disabled */ - } - } /* End Method(_SB.INTH._STA) */ - - Method(_DIS ,0) { - Store(0, PINH) - } /* End Method(_SB.INTH._DIS) */ - - Method(_PRS ,0) { - Return(IRQB) // Return(IRQP) - } /* Method(_SB.INTH._CRS) */ - - Method(_CRS ,0) { - Store (IRQB, Local0) // {10,11} - CreateWordField(Local0, 0x1, IRQ0) - ShiftLeft(1, PINH, IRQ0) - Return(Local0) - } /* Method(_SB.INTH._CRS) */ - - Method(_SRS, 1) { - CreateWordField(ARG0, 1, IRQ0) - /* Use lowest available IRQ */ - FindSetRightBit(IRQ0, Local0) - Decrement(Local0) - Store(Local0, PINH) - } /* End Method(_SB.INTH._SRS) */ - } /* End Device(INTH) */ - - - /* Real Time Clock Device */ - Device(RTC0) { - Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible)*/ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {8} - IO(Decode16,0x0070, 0x0070, 1, 2) - /* IO(Decode16,0x0070, 0x0070, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ - - Device(TMR) { /* Timer */ - Name(_HID,EISAID("PNP0100")) /* System Timer */ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {0} - IO(Decode16, 0x0040, 0x0040, 1, 4) - /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ - - Device(SPKR) { /* Speaker */ - Name(_HID,EISAID("PNP0800")) /* AT style speaker */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0061, 0x0061, 1, 1) - }) - } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ - - Device(PIC) { - Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ - Name(_CRS, ResourceTemplate() { - IRQ (Edge, ActiveHigh, Exclusive, ) {2} - IO(Decode16,0x0020, 0x0020, 1, 2) - IO(Decode16,0x00A0, 0x00A0, 0, 2) - /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ - /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ - }) - } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ - - Device(MAD) { /* 8257 DMA */ - Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ - Name(_CRS, ResourceTemplate() { - DMA(Compatibility,NotBusMaster,Transfer8_16){4} - IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) - IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) - IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) - IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) - IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) - IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) - }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ - } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ - - Device(COPR) { - Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00F0, 0x00F0, 1, 0x10) - IRQ (Edge, ActiveHigh, Exclusive, ) {13} - }) - } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ - - Device(HPET) { /* HPET */ - Name(_HID,EISAID("PNP0103")) - Name(CRS,ResourceTemplate() { - Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, 0x00000400, HPT) /* 1kb reserved space */ - }) - Method(_STA, 0) { - Return(0x0F) /* HPET is visible */ - } - Method(_CRS, 0) { - Return(CRS) - } - } - - Device (KBC0) - { - Name (_HID, EisaId ("PNP0303")) - Name (_CRS, ResourceTemplate () - { - IO (Decode16, - 0x0060, // Range Minimum - 0x0060, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IO (Decode16, - 0x0064, // Range Minimum - 0x0064, // Range Maximum - 0x01, // Alignment - 0x01, // Length - ) - IRQ (Edge, ActiveHigh, Exclusive, ) {1} - }) - } - - Device (MSE0) - { - Name (_HID, EisaId ("PNP0F13")) - Name (_CRS, ResourceTemplate () - { - IRQ (Edge, ActiveHigh, Exclusive, ) {12} - }) - } - } /* end LPC0 */ - - Device(ACAD) { - Name(_ADR, 0x00140005) - Name (_PRW, Package (0x02) - { - 0x0C, - 0x04 - }) - } /* end Ac97audio */ - - Device(ACMD) { - Name(_ADR, 0x00140006) - Name (_PRW, Package (0x02) - { - 0x0C, - 0x04 - }) - } /* end Ac97modem */ - - /* ITE IT8712F Support */ - OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ - Field (IOID, ByteAcc, NoLock, Preserve) - { - SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ - } - - IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) - { - Offset (0x07), - LDN, 8, /* Logical Device Number */ - Offset (0x20), - CID1, 8, /* Chip ID Byte 1, 0x87 */ - CID2, 8, /* Chip ID Byte 2, 0x12 */ - Offset (0x30), - ACTR, 8, /* Function activate */ - Offset (0xF0), - APC0, 8, /* APC/PME Event Enable Register */ - APC1, 8, /* APC/PME Status Register */ - APC2, 8, /* APC/PME Control Register 1 */ - APC3, 8, /* Environment Controller Special Configuration Register */ - APC4, 8 /* APC/PME Control Register 2 */ - } - - /* Enter the IT8712F MB PnP Mode */ - Method (EPNP) - { - Store(0x87, SIOI) - Store(0x01, SIOI) - Store(0x55, SIOI) - Store(0x55, SIOI) /* IT8712F magic number */ - } - /* Exit the IT8712F MB PnP Mode */ - Method (XPNP) - { - Store (0x02, SIOI) - Store (0x02, SIOD) - } - - /* - * Keyboard PME is routed to SB600 Gevent3. We can wake - * up the system by pressing the key. - */ - Method (SIOS, 1) - { - /* We only enable KBD PME for S5. */ - If (LLess (Arg0, 0x05)) - { - EPNP() - /* DBGO("IT8712F\n") */ - - Store (0x4, LDN) - Store (One, ACTR) /* Enable EC */ - /* - Store (0x4, LDN) - Store (0x04, APC4) - */ /* falling edge. which mode? Not sure. */ - - Store (0x4, LDN) - Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ - Store (0x4, LDN) - Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ - - XPNP() - } - } - Method (SIOW, 0) - { - EPNP() - Store (0x4, LDN) - Store (Zero, APC0) /* disable keyboard PME */ - Store (0x4, LDN) - Store (0xFF, APC1) /* clear keyboard PME status */ - XPNP() - } - -/* ############################################################################################### */ - Name(CRES, ResourceTemplate() { - IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0000, /* range minimum */ - 0x0CF7, /* range maximum */ - 0x0000, /* translation */ - 0x0CF8 /* length */ - ) - - WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, /* address granularity */ - 0x0D00, /* range minimum */ - 0xFFFF, /* range maximum */ - 0x0000, /* translation */ - 0xF300 /* length */ - ) - - Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ - Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ - Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ - - /* DRAM Memory from 1MB to TopMem */ - DWORDMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 0, 0, 0, 0x00, 1, ,, EMM2) - WORDIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x00, 0x0D00, 0xffff, 0x00, 0xf300) - }) /* End Name(_SB.PCI0.CRES) */ - - Method(_CRS, 0) { - - /* DBGO("\\_SB\\PCI0\\_CRS\n") */ - - CreateDWordField(CRES, ^EMM1._BAS, EM1B) - CreateDWordField(CRES, ^EMM1._LEN, EM1L) - - CreateDWordField(CRES, ^EMM2._MIN, EM2B) - CreateDWordField(CRES, ^EMM2._MAX, EM2E) - CreateDWordField(CRES, ^EMM2._LEN, EM2L) - - Store(TOM1, EM2B) - Subtract(IOLM, 1, EM2E) - Subtract(IOLM, TOM1, EM2L) - - If(LGreater(LOMH, 0xC0000)){ - Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ - Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ - } - - Return(CRES) /* note to change the Name buffer */ - } -/* ########################################################################################## */ - } /* End Device(PCI0) */ - } /* End \_SB scope */ - - Scope(\_SI) { - Method(_SST, 1) { - /* DBGO("\\_SI\\_SST\n") */ - /* DBGO(" New Indicator state: ") */ - /* DBGO(Arg0) */ - /* DBGO("\n") */ - } - } /* End Scope SI */ - -#include <southbridge/amd/cimx/sb800/acpi/smbus.asl> -#include "acpi/thermal.asl" -} diff --git a/src/mainboard/siemens/sitemp_g1p1/fadt.c b/src/mainboard/siemens/sitemp_g1p1/fadt.c deleted file mode 100644 index 360a427c21..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/fadt.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ACPI - create the Fixed ACPI Description Tables (FADT) - */ - -#include <string.h> -#include <console/console.h> -#include <arch/acpi.h> -#include <arch/io.h> -#include <device/device.h> -#include <../southbridge/amd/sb600/sb600.h> - -/*extern*/ u16 pm_base = 0x800; -/* pm_base should be set in sb ACPI */ -/* pm_base should be got from bar2 of rs690. Here I compact ACPI - * registers into 32 bytes limit. - * */ - -#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */ -#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */ -#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */ -#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */ -#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */ -#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */ - -void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt) -{ - acpi_header_t *header = &(fadt->header); - - pm_base &= 0xFFFF; - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base); - - /* Prepare the header */ - memset((void *)fadt, 0, sizeof(acpi_fadt_t)); - memcpy(header->signature, "FACP", 4); - header->length = 244; - header->revision = 3; - memcpy(header->oem_id, OEM_ID, 6); - memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8); - memcpy(header->asl_compiler_id, ASLC, 4); - header->oem_revision = 0x20101005; - header->asl_compiler_revision = 3; - - fadt->firmware_ctrl = (u32) facs; - fadt->dsdt = (u32) dsdt; - /* 3 = Workstation, 4 = Enterprise Server, 7 = Performance Server */ - fadt->preferred_pm_profile = 0x03; - fadt->sci_int = 9; - /* disable system management mode by setting to 0: */ - fadt->smi_cmd = 0; - fadt->acpi_enable = 0xf0; - fadt->acpi_disable = 0xf1; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0xe2; - - pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF); - pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8); - pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF); - pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8); - pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF); - pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8); - pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF); - pm_iowrite(0x29, ACPI_GPE0_BLK >> 8); - - /* CpuControl is in \_PR.CP00, 6 bytes */ - pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF); - pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8); - - pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */ - pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */ - - pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF); - pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8); - - pm_iowrite(0x0E, 1 << 3 | 0 << 2); /* AcpiDecodeEnable, When set, SB uses - * the contents of the PM registers at - * index 20-2B to decode ACPI I/O address. - * AcpiSmiEn & SmiCmdEn*/ - pm_iowrite(0x10, 1 << 1 | 1 << 3| 1 << 5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */ - outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */ - - fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; - fadt->pm1b_evt_blk = 0x0000; - fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; - fadt->pm1b_cnt_blk = 0x0000; - fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK; - fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; - fadt->gpe0_blk = ACPI_GPE0_BLK; - fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */ - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 8; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - - fadt->cst_cnt = 0xe3; - fadt->p_lvl2_lat = 101; - fadt->p_lvl3_lat = 1001; - fadt->flush_size = 0; - fadt->flush_stride = 0; - fadt->duty_offset = 1; - fadt->duty_width = 3; - fadt->day_alrm = 0; /* 0x7d these have to be */ - fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ - fadt->century = 0; /* 0x7f to make rtc alrm work */ - fadt->iapc_boot_arch = 0x3; /* See table 5-11 */ - fadt->flags = 0x0001c1a5;/* 0x25; */ - - fadt->res2 = 0; - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.resv = 0; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0x0; - - fadt->reset_value = 6; - fadt->x_firmware_ctl_l = (u32) facs; - fadt->x_firmware_ctl_h = 0; - fadt->x_dsdt_l = (u32) dsdt; - fadt->x_dsdt_h = 0; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.resv = 0; - fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 4; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.resv = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.resv = 0; - fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 2; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.resv = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 0; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.resv = 0; - fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.resv = 0; - fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 32; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.resv = 0; - fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.resv = 0; - fadt->x_gpe1_blk.addrl = 0; - fadt->x_gpe1_blk.addrh = 0x0; - - header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t)); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c b/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c deleted file mode 100644 index b1b7270802..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/get_bus_conf.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <stdlib.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ -u8 bus_rs690[8]; -u8 bus_sb600[2]; -u32 apicid_sb600; - -/* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ -u32 pci1234x[] = { - 0x0000ff0, -}; - -/* -* HT Chain device num, actually it is unit id base of every ht device in chain, -* assume every chain only have 4 ht device at most -*/ -u32 hcdnx[] = { - 0x20202020, -}; - -u32 sbdn_rs690; -u32 sbdn_sb600; - - - -static u32 get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - u32 apicid_base; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); - sbdn_rs690 = sysconf.sbdn; - sbdn_sb600 = 0; - - for (i = 0; i < 2; i++) { - bus_sb600[i] = 0; - } - for (i = 0; i < 8; i++) { - bus_rs690[i] = 0; - } - - bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb600[0] = bus_rs690[0]; - - /* sb600 */ - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4)); - if (dev) { - bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - - /* rs690 */ - for (i = 1; i < 8; i++) { - dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0)); - if (dev) { - bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - - /* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_sb600 = apicid_base + 0; -} diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.c b/src/mainboard/siemens/sitemp_g1p1/int15_func.c deleted file mode 100644 index b01a292411..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <stdlib.h> -#include <console/console.h> -#include <arch/interrupt.h> -#include <x86emu/regs.h> -#include "int15_func.h" - -int sbios_INT15_handler(void); -/*extern*/ unsigned long vgainfo_addr; - -static INT15_function_extensions __int15_func; - -/* System BIOS int15 function */ -int sbios_INT15_handler(void) -{ - int res = -1; - - printk(BIOS_DEBUG, "System BIOS INT 15h\n"); - - switch (X86_EAX & 0xffff) { -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - case 0x5f35: - X86_EAX = 0x5f; - X86_ECX = BOOT_DISPLAY_DEFAULT; - res = 0; - break; - case 0x5f40: - X86_EAX = 0x5f; - X86_ECX = 3; // This is mainboard specific - printk(BIOS_DEBUG, "DISPLAY=%x\n", X86_ECX); - res = 0; - break; - case 0x4e08: - switch (X86_EBX & 0xff) { - case 0x00: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func00_LCD_panel_id; - printk(BIOS_DEBUG, "DISPLAY = %x\n", X86_EBX & 0xff); - res = 0; - break; - case 0x02: - break; - case 0x05: - X86_EAX &= ~(0xff); - X86_EBX = (X86_EBX & ~(0xff)) | __int15_func.regs.func05_TV_standard; - printk(BIOS_DEBUG, "TV = %x\n", X86_EBX & 0xff); - res = 0; - break; - case 0x80: - X86_EAX &= ~(0xff); - X86_EBX &= ~(0xff); - printk(BIOS_DEBUG, "Integrated System Information = %x:%x\n", X86_EDX, X86_EDI); - vgainfo_addr = (X86_EDX * 16) + X86_EDI; - res = 0; - break; - case 0x89: - X86_EAX &= ~(0xff); - X86_EBX &= ~(0xff); - printk(BIOS_DEBUG, "Get supported display device information\n"); - res = 0; - break; - default: - break; - } - break; - default: - printk(BIOS_DEBUG, "Unknown INT15 function %04x!\n", X86_EAX & 0xffff); - break; - } - - return res; -} - -/* Initialization VBIOS function extensions */ -void install_INT15_function_extensions(INT15_function_extensions *int15_func) -{ - printk(BIOS_DEBUG, "Initialize function extensions for Callback function number 04E08h ..\n"); - __int15_func.regs.func00_LCD_panel_id = int15_func->regs.func00_LCD_panel_id; - __int15_func.regs.func05_TV_standard = int15_func->regs.func05_TV_standard; - mainboard_interrupt_handlers(0x15, &sbios_INT15_handler); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/int15_func.h b/src/mainboard/siemens/sitemp_g1p1/int15_func.h deleted file mode 100644 index 298b9d1690..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/int15_func.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2009 Libra Li <libra.li@technexion.com> - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -typedef struct { - u8 func00_LCD_panel_id; // Callback Sub-Function 00h - Get LCD Panel ID - u8 func02_set_expansion; - u8 func05_TV_standard; // Callback Sub-Function 05h - Select Boot-up TV Standard - u16 func80_sysinfo_table; -}INT15_regs; - -typedef struct { - INT15_regs regs; -}INT15_function_extensions; - -extern void install_INT15_function_extensions(INT15_function_extensions *); diff --git a/src/mainboard/siemens/sitemp_g1p1/irq_tables.c b/src/mainboard/siemens/sitemp_g1p1/irq_tables.c deleted file mode 100644 index dccbe12243..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/irq_tables.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> - -/* Platform IRQs */ -#define PIRQA 10 -#define PIRQB 11 -#define PIRQC 5 -#define PIRQD 15 - -/* Map */ -#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ -#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ -#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ -#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ - -/* Link */ -#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ -#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ -#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ -#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ - -static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn, - u8 link0, u16 bitmap0, u8 link1, u16 bitmap1, - u8 link2, u16 bitmap2, u8 link3, u16 bitmap3, - u8 slot, u8 rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; -extern unsigned long sbdn_sb600; - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - u32 slot_num; - u8 *v; - - u8 sum = 0; - int i; - - get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */ - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (u8 *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_sb600[0]; - pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1002; - pirq->rtr_device = 0x4384; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* pci bridge */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, - 0); - pirq_info++; - slot_num++; - - /* ide */ - write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 1, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 1, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "write_pirq_routing_table done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c deleted file mode 100644 index d4cb5828a7..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ /dev/null @@ -1,825 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <arch/io.h> -#include <arch/interrupt.h> -#include <delay.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> -#include <pc80/mc146818rtc.h> -#include <cpu/x86/lapic.h> -#include <southbridge/amd/sb600/sb600.h> -#include <southbridge/amd/rs690/chip.h> -#include <southbridge/amd/rs690/rs690.h> -#include <superio/ite/it8712f/it8712f.h> -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) -#include <x86emu/x86emu.h> -#endif -#include "int15_func.h" -#include "mainboard.h" - -// ****LCD panel ID support: ***** -// Callback Sub-Function 00h - Get LCD Panel ID -#define PANEL_TABLE_ID_NO 0 // no LCD -#define PANEL_TABLE_ID1 1 // 1024x768_65MHz_Dual -#define PANEL_TABLE_ID2 2 // 920x1200_162MHz -#define PANEL_TABLE_ID3 3 // 600x1200_162MHz -#define PANEL_TABLE_ID4 4 // 1024x768_65MHz -#define PANEL_TABLE_ID5 5 // 1400x1050_108MHz -#define PANEL_TABLE_ID6 6 // 1680x1050_119MHz -#define PANEL_TABLE_ID7 7 // 2048x1536_164MHz -#define PANEL_TABLE_ID8 8 // 1280x1024_108MHz -#define PANEL_TABLE_ID9 9 // 1366x768_86MHz_chimei_V32B1L01 - -// Callback Sub-Function 05h - Select Boot-up TV Standard -#define TV_MODE_00 0x00 /* NTSC */ -#define TV_MODE_01 0x01 /* PAL */ -#define TV_MODE_02 0x02 /* PALM */ -#define TV_MODE_03 0x03 /* PAL60 */ -#define TV_MODE_04 0x04 /* NTSCJ */ -#define TV_MODE_05 0x05 /* PALCN */ -#define TV_MODE_06 0x06 /* PALN */ -#define TV_MODE_09 0x09 /* SCART-RGB */ -#define TV_MODE_NO 0xff /* No TV Support */ - -#define PLX_VIDDID 0x861610b5 - -/* 7475 Common Registers */ -#define REG_DEVREV2 0x12 /* ADT7490 only */ -#define REG_VTT 0x1E /* ADT7490 only */ -#define REG_EXTEND3 0x1F /* ADT7490 only */ -#define REG_VOLTAGE_BASE 0x20 -#define REG_TEMP_BASE 0x25 -#define REG_TACH_BASE 0x28 -#define REG_PWM_BASE 0x30 -#define REG_PWM_MAX_BASE 0x38 -#define REG_DEVID 0x3D -#define REG_VENDID 0x3E -#define REG_DEVID2 0x3F -#define REG_STATUS1 0x41 -#define REG_STATUS2 0x42 -#define REG_VID 0x43 /* ADT7476 only */ -#define REG_VOLTAGE_MIN_BASE 0x44 -#define REG_VOLTAGE_MAX_BASE 0x45 -#define REG_TEMP_MIN_BASE 0x4E -#define REG_TEMP_MAX_BASE 0x4F -#define REG_TACH_MIN_BASE 0x54 -#define REG_PWM_CONFIG_BASE 0x5C -#define REG_TEMP_TRANGE_BASE 0x5F -#define REG_PWM_MIN_BASE 0x64 -#define REG_TEMP_TMIN_BASE 0x67 -#define REG_TEMP_THERM_BASE 0x6A -#define REG_REMOTE1_HYSTERSIS 0x6D -#define REG_REMOTE2_HYSTERSIS 0x6E -#define REG_TEMP_OFFSET_BASE 0x70 -#define REG_CONFIG2 0x73 -#define REG_EXTEND1 0x76 -#define REG_EXTEND2 0x77 -#define REG_CONFIG1 0x40 // ADT7475 -#define REG_CONFIG3 0x78 -#define REG_CONFIG5 0x7C -#define REG_CONFIG6 0x10 // ADT7475 -#define REG_CONFIG7 0x11 // ADT7475 -#define REG_CONFIG4 0x7D -#define REG_STATUS4 0x81 /* ADT7490 only */ -#define REG_VTT_MIN 0x84 /* ADT7490 only */ -#define REG_VTT_MAX 0x86 /* ADT7490 only */ - -#define VID_VIDSEL 0x80 /* ADT7476 only */ - -#define CONFIG2_ATTN 0x20 -#define CONFIG3_SMBALERT 0x01 -#define CONFIG3_THERM 0x02 -#define CONFIG4_PINFUNC 0x03 -#define CONFIG4_MAXDUTY 0x08 -#define CONFIG4_ATTN_IN10 0x30 -#define CONFIG4_ATTN_IN43 0xC0 -#define CONFIG5_TWOSCOMP 0x01 -#define CONFIG5_TEMPOFFSET 0x02 -#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */ -#define REMOTE1 0 -#define LOCAL 1 -#define REMOTE2 2 - -/* ADT7475 Settings */ -#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */ -#define ADT7475_TEMP_COUNT 3 -#define ADT7475_TACH_COUNT 4 -#define ADT7475_PWM_COUNT 3 - -/* Macros to easily index the registers */ -#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2)) -#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2)) - -#define PWM_REG(idx) (REG_PWM_BASE + (idx)) -#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx)) -#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx)) -#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx)) - -#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx)) -#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2)) -#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2)) - -#define TEMP_REG(idx) (REG_TEMP_BASE + (idx)) -#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2)) -#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2)) -#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx)) -#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx)) -#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx)) -#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx)) - -#define SMBUS_IO_BASE 0x1000 -#define ADT7475_ADDRESS 0x2E - -#define D_OPEN (1 << 6) -#define D_CLS (1 << 5) -#define D_LCK (1 << 4) -#define G_SMRAME (1 << 3) -#define A_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) // 0x2: SMM space at 640KB-768KB - -extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); -extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val); - -static u32 smbus_io_base = SMBUS_IO_BASE; -static u32 adt7475_address = ADT7475_ADDRESS; - -/* Macro to read the registers */ -#define adt7475_read_byte(reg) \ - do_smbus_read_byte(smbus_io_base, adt7475_address, reg) - -#define adt7475_write_byte(reg, val) \ - do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val) - -#define TWOS_COMPL 1 - -struct __table__{ - const char *info; - u8 val; -}; - -struct __table__ dutycycles[] = { - {"25%", 0x3f},{"30%", 0x4c},{"35%", 0x59},{"40%", 0x66},{"45%", 0x73}, - {"50%", 0x80},{"55%", 0x8d},{"60%", 0x9a},{"65%", 0xa7},{"70%", 0xb4}, - {"75%", 0xc1},{"80%", 0xce},{"85%", 0xdb},{"90%", 0xe8},{"95%", 0xf5}, - {"100%", 0xff} -}; -#define SIZEOF_DUTYCYCLES sizeof(dutycycles)/sizeof(struct __table__) -#define DUTYCYCLE(i,d) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].val : dutycycles[d].val // hopefully d is a correct value !!! fix -#define DUTYCYCLE_INFO(i) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].info : "out_of_range" -#if TWOS_COMPL == 0 -struct __table__ temperatures[] = { - {"30C", 0x5e},{"35C", 0x63},{"40C", 0x68},{"45C", 0x6d},{"50C", 0x72}, - {"55C", 0x77},{"60C", 0x7c},{"65C", 0x81},{"70C", 0x86},{"75C", 0x8b}, - {"80C", 0x90} -}; -#else -struct __table__ temperatures[] = { - {"30C", 30},{"35C", 35},{"40C", 40},{"45C", 45},{"50C", 50}, - {"55C", 55},{"60C", 60},{"65C", 65},{"70C", 70},{"75C", 75}, - {"80C", 80} -}; -#endif -// FIXME: implicit conversion from 'double' to 'int' -// int trange[] = {2.0,2.5,3.33,4.0,5.0,6.67,8.0,10.0,13.33,16.0,20.0,26.67,32.0,40.0,53.33,80.0}; -int trange[] = {2,2,3,4,5,6,8,10,13,16,20,26,32,40,53,80}; - -#define SIZEOF_TEMPERATURES sizeof(temperatures)/sizeof(struct __table__) -#define TEMPERATURE(i,d) (i < SIZEOF_TEMPERATURES) ? temperatures[i].val : temperatures[d].val // hopefully d is a correct value !!! fix -#define TEMPERATURE_INFO(i) (i < SIZEOF_TEMPERATURES) ? temperatures[i].info : "out of range" - -struct fan_control { - unsigned int enable : 1; - u8 polarity; - u8 t_min; - u8 t_max; - u8 pwm_min; - u8 pwm_max; - u8 t_range; -}; -/* ############################################################################################# */ -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) -static int int15_handler(void) -{ -#define BOOT_DISPLAY_DEFAULT 0 -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - - printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", - __func__, X86_AX, X86_BX, X86_CX, X86_DX); - - switch (X86_AX) { - case 0x4e08: /* Boot Display */ - switch (X86_BX) { - case 0x80: - X86_AX &= ~(0xff); // Success - X86_BX &= ~(0xff); - printk(BIOS_DEBUG, "Integrated System Information\n"); - break; - case 0x00: - X86_AX &= ~(0xff); - X86_BX = 0x00; - printk(BIOS_DEBUG, "Panel ID = 0\n"); - break; - case 0x05: - X86_AX &= ~(0xff); - X86_BX = 0xff; - printk(BIOS_DEBUG, "TV = off\n"); - break; - default: - return 0; - } - break; - case 0x5f35: /* Boot Display */ - X86_AX = 0x005f; // Success - X86_CL = BOOT_DISPLAY_DEFAULT; - break; - case 0x5f40: /* Boot Panel Type */ - // M.x86.R_AX = 0x015f; // Supported but failed - X86_AX = 0x005f; // Success - X86_CL = 3; // Display ID - break; - default: - /* Interrupt was not handled */ - return 0; - } - - /* Interrupt handled */ - return 1; -} -#endif -/* ############################################################################################# */ - -static u8 calc_trange(u8 t_min, u8 t_max) { - - u8 prev; - int i; - int diff = t_max - t_min; - - // walk through the trange table - for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) { - if( trange[i] < diff ) { - prev = i; // save last val - continue; - } - if( diff == trange[i] ) return i; - if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index - return i; - } - return prev; -} - -/******************************************************** -* sina uses SB600 GPIO9 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to -* get the cable type, 40 pin or 80 pin? -********************************************************/ -static void cable_detect(void) -{ - - u8 byte; - struct device *sm_dev; - struct device *ide_dev; - - /* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */ - printk(BIOS_DEBUG, "%s.\n", __func__); - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 5); /* Set Gpio9 as input */ - pci_write_config8(sm_dev, 0xA9, byte); - - /* IDE Controller (Device 20, Function 1) on SB600 */ - ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); - - byte = pci_read_config8(ide_dev, 9); - printk(BIOS_INFO, "IDE controller in %s Mode\n", byte & (1 << 0) ? "Native" : "Compatibility"); - - byte = pci_read_config8(ide_dev, 0x56); - byte &= ~(7 << 0); - if( pci_read_config8(sm_dev, 0xAA) & (1 << 5) ) - byte |= 2 << 0; /* mode 2 */ - else - byte |= 5 << 0; /* mode 5 */ - printk(BIOS_INFO, "DMA mode %d selected\n", byte & (7 << 0)); - pci_write_config8(ide_dev, 0x56, byte); -} - -/** - * @brief Detect the ADT7475 device - * - */ - -static const char * adt7475_detect( void ) { - - int vendid, devid, devid2; - const char *name = NULL; - - vendid = adt7475_read_byte(REG_VENDID); - devid2 = adt7475_read_byte(REG_DEVID2); - if (vendid != 0x41 || (devid2 & 0xf8) != 0x68) /* Analog Devices */ - return name; - - devid = adt7475_read_byte(REG_DEVID); - if (devid == 0x73) - name = "adt7473"; - else if (devid == 0x75 && adt7475_address == 0x2e) - name = "adt7475"; - else if (devid == 0x76) - name = "adt7476"; - else if ((devid2 & 0xfc) == 0x6c) - name = "adt7490"; - - return name; -} - -// thermal control defaults -const struct fan_control cpu_fan_control_defaults = { - .enable = 0, // disable by default - .polarity = 0, // high by default - .t_min = 3, // default = 45°C - .t_max = 7, // 65°C - .pwm_min = 1, // default dutycycle = 30% - .pwm_max = 13, // 90% -}; -const struct fan_control case_fan_control_defaults = { - .enable = 0, // disable by default - .polarity = 0, // high by default - .t_min = 2, // default = 40°C - .t_max = 8, // 70°C - .pwm_min = 0, // default dutycycle = 25% - .pwm_max = 13, // 90% -}; - -static void pm_init( void ) -{ - u16 word; - u8 byte; - struct device *sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - - /* set SB600 GPIO 64 to GPIO with pull-up */ - byte = pm2_ioread(0x42); - byte &= 0x3f; - pm2_iowrite(0x42, byte); - - /* set GPIO 64 to tristate */ - word = pci_read_config16(sm_dev, 0x56); - word |= 1 << 7; - pci_write_config16(sm_dev, 0x56, word); - - /* set GPIO 64 internal pull-up */ - byte = pm2_ioread(0xf0); - byte &= 0xee; - pm2_iowrite(0xf0, byte); - - /* set Talert to be active low */ - byte = pm_ioread(0x67); - byte &= ~(1 << 5); - pm_iowrite(0x67, byte); - - /* set Talert to generate ACPI event */ - byte = pm_ioread(0x3c); - byte &= 0xf3; - pm_iowrite(0x3c, byte); - - /* set GPM5 to not wake from s5 */ - byte = pm_ioread(0x77); - byte &= ~(1 << 5); - pm_iowrite(0x77, byte); -} - - /** - * @brief Setup thermal config on SINA Mainboard - * - */ - -static void set_thermal_config(void) -{ - u8 byte, byte2; - u8 cpu_pwm_conf, case_pwm_conf; - struct device *sm_dev; - struct fan_control cpu_fan_control, case_fan_control; - const char *name = NULL; - - - sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); - smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE - - if( (name = adt7475_detect()) == NULL ) { - printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address); - return; - } - printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address); - - cpu_fan_control = cpu_fan_control_defaults; - case_fan_control = case_fan_control_defaults; - - if (get_option(&byte, "cpu_fan_control") == CB_CMOS_CHECKSUM_INVALID) { - printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__); - } else { - // get all the options needed - if( get_option(&byte, "cpu_fan_control") == CB_SUCCESS ) - cpu_fan_control.enable = byte ? 1 : 0; - - get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); - get_option(&cpu_fan_control.t_min, "cpu_t_min"); - get_option(&cpu_fan_control.t_max, "cpu_t_max"); - get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min"); - get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max"); - - if( get_option(&byte, "chassis_fan_control") == CB_SUCCESS) - case_fan_control.enable = byte ? 1 : 0; - get_option(&case_fan_control.polarity, "chassis_fan_polarity"); - get_option(&case_fan_control.t_min, "chassis_t_min"); - get_option(&case_fan_control.t_max, "chassis_t_max"); - get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min"); - get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max"); - - } - - printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable"); - printk(BIOS_DEBUG, " cpu_fan_polarity:%s", cpu_fan_control.polarity ? "low" : "high"); - - printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min)); - cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min); - - printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max)); - cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max); - - printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min)); - cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min); - - printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max)); - cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max); - - cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max); - printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range); - cpu_fan_control.t_range <<= 4; - cpu_fan_control.t_range |= (4 << 0); // 35.3Hz - - printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable"); - printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high"); - - printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min)); - case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min); - - printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max)); - case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max); - - printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min)); - case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min); - - printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max)); - case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max); - - case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max); - printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range); - case_fan_control.t_range <<= 4; - case_fan_control.t_range |= (4 << 0); // 35.3Hz - - cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output - cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5); // manual control - case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp - - /* set adt7475 */ - - adt7475_write_byte(REG_CONFIG1, 0x04); // clear register, bit 2 is read only - - /* Config Register 6: */ - adt7475_write_byte(REG_CONFIG6, 0x00); - /* Config Register 7 */ - adt7475_write_byte(REG_CONFIG7, 0x00); - - /* Config Register 5: */ - /* set Offset 64 format, enable THERM on Remote 1& Local */ - adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60); - /* No offset for remote 1 */ - adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00); - /* No offset for local */ - adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00); - /* No offset for remote 2 */ - adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00); - - /* remote 1 low temp limit */ - adt7475_write_byte(TEMP_MIN_REG(0), 0x00); - /* remote 1 High temp limit (90C) */ - adt7475_write_byte(TEMP_MAX_REG(0), 0x9a); - - /* local Low Temp Limit */ - adt7475_write_byte(TEMP_MIN_REG(1), 0x00); - /* local High Limit (90C) */ - adt7475_write_byte(TEMP_MAX_REG(1), 0x9a); - - /* remote 1 therm temp limit (95C) */ - adt7475_write_byte(TEMP_THERM_REG(0), 0x9f); - /* local therm temp limit (95C) */ - adt7475_write_byte(TEMP_THERM_REG(1), 0x9f); - - /* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */ - adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf); - /* PWM 3 configuration register Case fan controlled by ADTxxxx temp */ - adt7475_write_byte(PWM_CONFIG_REG(2), case_pwm_conf); - - if( cpu_fan_control.enable ) { - /* PWM 1 minimum duty cycle (37%) */ - adt7475_write_byte(PWM_MIN_REG(0), cpu_fan_control.pwm_min); - /* PWM 1 Maximum duty cycle (100%) */ - adt7475_write_byte(PWM_MAX_REG(0), cpu_fan_control.pwm_max); - /* Remote 1 temperature Tmin (32C) */ - adt7475_write_byte(TEMP_TMIN_REG(0), cpu_fan_control.t_min); - /* remote 1 Trange (53C ramp range) */ - adt7475_write_byte(TEMP_TRANGE_REG(0), cpu_fan_control.t_range); - } else { - adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max); - } - - if( case_fan_control.enable ) { - /* PWM 2 minimum duty cycle (37%) */ - adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min); - /* PWM 2 Maximum Duty Cycle (100%) */ - adt7475_write_byte(PWM_MAX_REG(2), case_fan_control.pwm_max); - /* local temperature Tmin (32C) */ - adt7475_write_byte(TEMP_TMIN_REG(1), case_fan_control.t_min); - /* local Trange (53C ramp range) */ - adt7475_write_byte(TEMP_TRANGE_REG(1), case_fan_control.t_range); // Local TRange - adt7475_write_byte(TEMP_TRANGE_REG(2), case_fan_control.t_range); // PWM2 Freq - } else { - adt7475_write_byte(PWM_REG(2), case_fan_control.pwm_max); - } - - /* Config Register 3 - enable smbalert & therm */ - adt7475_write_byte(0x78, 0x03); - /* Config Register 4 - enable therm output */ - adt7475_write_byte(0x7d, 0x09); - /* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */ - adt7475_write_byte(0x75, 0x2e); - - /* Config Register 1 Set Start bit */ - adt7475_write_byte(0x40, 0x05); - - /* Read status register to clear any old errors */ - byte2 = adt7475_read_byte(0x42); - byte = adt7475_read_byte(0x41); - - printk(BIOS_DEBUG, "Init 'Thermal Monitor' end , status 0x42 = 0x%02x, status 0x41 = 0x%02x\n", - byte2, byte); - -} - -static void patch_mmio_nonposted( void ) -{ - unsigned reg, index; - resource_t rbase, rend; - u32 base, limit; - struct resource *resource; - struct device *dev; - struct device *k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1)); - - printk(BIOS_DEBUG,"%s ...\n", __func__); - - dev = dev_find_slot(1, PCI_DEVFN(5,0)); - // the uma frame buffer - index = 0x10; - resource = probe_resource(dev, index); - if( resource ) { - // fixup resource nonposted in k8 mmio - /* Get the base address */ - rbase = (resource->base >> 8) & ~(0xff); - /* Get the limit (rounded up) */ - rend = (resource_end(resource) >> 8) & ~(0xff); - - printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend); - - for( reg = 0xb8; reg >= 0x80; reg -= 8 ) { - base = pci_read_config32(k8_f1,reg); - limit = pci_read_config32(k8_f1,reg+4); - printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit); - if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) { - limit |= (1 << 7); - printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit); - pci_write_config32(k8_f1, reg+4, limit); - break; - } - } - printk(BIOS_DEBUG, "\n"); - } -} - -struct { - unsigned int bus; - unsigned int devfn; -} slot[] = { - {0, PCI_DEVFN(0,0)}, - {0, PCI_DEVFN(18,0)}, - {0, PCI_DEVFN(19,0)},{0, PCI_DEVFN(19,1)},{0, PCI_DEVFN(19,2)},{0, PCI_DEVFN(19,3)},{0, PCI_DEVFN(19,4)},{0, PCI_DEVFN(19,5)}, - {0, PCI_DEVFN(20,0)},{0, PCI_DEVFN(20,1)},{0, PCI_DEVFN(20,2)},{0, PCI_DEVFN(20,3)},{0, PCI_DEVFN(20,5)},{0, PCI_DEVFN(20,6)}, - {0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)}, - {255,0}, -}; - - -unsigned int plx_present = 0; - -static void update_subsystemid( struct device *dev ) -{ - int i; - - dev->subsystem_vendor = 0x110a; - if( plx_present ){ - dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077 - } else { - dev->subsystem_device = 0x4077; // U1P0 = 0x4077 - } - printk(BIOS_INFO, "%s [%x/%x]\n", dev_name(dev), dev->subsystem_vendor, dev->subsystem_device ); - for( i = 0; slot[i].bus < 255; i++) { - struct device *d; - d = dev_find_slot(slot[i].bus,slot[i].devfn); - if( d ) { - printk(BIOS_DEBUG,"%s subsystem <- %x/%x\n", dev_path(d), dev->subsystem_vendor, dev->subsystem_device); - d->subsystem_device = dev->subsystem_device; - } - } -} - -static void detect_hw_variant( struct device *dev ) -{ - - struct device *nb_dev = NULL, *dev2 = NULL; - struct southbridge_amd_rs690_config *cfg; - u32 lc_state, id = 0; - - printk(BIOS_INFO, "Scan for PLX device ...\n"); - nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (!nb_dev) { - die("CAN NOT FIND RS690 DEVICE, HALT!\n"); - /* NOT REACHED */ - } - - dev2 = dev_find_slot(0, PCI_DEVFN(2, 0)); - if (!dev2) { - die("CAN NOT FIND GFX DEVICE 2, HALT!\n"); - /* NOT REACHED */ - } - PcieReleasePortTraining(nb_dev, dev2, 2); // we assume PLX is connected to port 2 - - mdelay(40); - lc_state = nbpcie_p_read_index(dev2, 0xa5); /* lc_state */ - printk(BIOS_DEBUG, "lc current state=%x\n", lc_state); - /* LC_CURRENT_STATE = bit0-5 */ - switch( lc_state & 0x3f ){ - case 0x00: - case 0x01: - case 0x02: - case 0x03: - case 0x04: - printk(BIOS_NOTICE, "No device present, skipping PLX scan ..\n"); - break; - case 0x07: - case 0x10: - { - struct device dummy; - u32 pci_primary_bus, buses; - u16 secondary, subordinate; - - printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID)); - // save the existing primary/secondary/subordinate bus number configuration. - secondary = dev2->bus->secondary; - subordinate = dev2->bus->subordinate; - buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS); - - // Configure the bus numbers for this bridge - // bus number 1 is for internal gfx device, so we start with busnumber 2 - - buses &= 0xff000000; - buses |= ((2 << 8) | (0xff << 16)); - // setup the buses in device 2 - pci_write_config32(dev2,PCI_PRIMARY_BUS, buses); - - // fake a device descriptor for a device behind device 2 - dummy.bus = dev2->bus; - dummy.bus->secondary = (buses >> 8) & 0xff; - dummy.bus->subordinate = (buses >> 16) & 0xff; - dummy.path.type = DEVICE_PATH_PCI; - dummy.path.pci.devfn = PCI_DEVFN(0,0); // PLX: device number 0, function 0 - - id = pci_read_config32(&dummy, PCI_VENDOR_ID); - /* Have we found something? - * Some broken boards return 0 if a slot is empty, but - * the expected answer is 0xffffffff - */ - if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) { - printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id); - } else { - printk(BIOS_DEBUG, "found device [%x]\n", id); - } - // restore changes made for device 2 - dev2->bus->secondary = secondary; - dev2->bus->subordinate = subordinate; - pci_write_config32(dev2, PCI_PRIMARY_BUS, pci_primary_bus); - } - break; - default: - break; - } - - plx_present = 0; - if( id == PLX_VIDDID ){ - printk(BIOS_INFO, "found PLX device\n"); - plx_present = 1; - cfg = (struct southbridge_amd_rs690_config *)dev2->chip_info; - if( cfg->gfx_tmds ) { - printk(BIOS_INFO, "Disable 'gfx_tmds' support\n"); - cfg->gfx_tmds = 0; - cfg->gfx_link_width = 4; - } - return; - } -} - -void smm_lock(void) -{ - /* LOCK the SMM memory window and enable normal SMM. - * After running this function, only a full reset can - * make the SMM registers writable again. - */ - printk(BIOS_DEBUG, "Locking SMM.\n"); - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x69, - D_LCK | G_SMRAME | A_BASE_SEG); -} - - /** - * @brief Init - * - * @param dev - the root device - */ - -static void mainboard_init(struct device *dev) -{ -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) - INT15_function_extensions int15_func; -#endif - - printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n", - dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); - -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) - if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS) - int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; - int15_func.regs.func05_TV_standard = TV_MODE_NO; - install_INT15_function_extensions(&int15_func); -#endif - set_thermal_config(); - pm_init(); - cable_detect(); - patch_mmio_nonposted(); - smm_lock(); -} - -/************************************************* -* enable the dedicated function in sina board. -* This function called early than rs690_enable. -*************************************************/ -static void mainboard_enable(struct device *dev) -{ - - printk(BIOS_INFO, "%s %s[%x/%x] %s\n", - dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); -#if IS_ENABLED(CONFIG_PCI_OPTION_ROM_RUN_YABEL) - /* Install custom int15 handler for VGA OPROM */ - mainboard_interrupt_handlers(0x15, &int15_handler); -#endif - - detect_hw_variant(dev); - update_subsystemid(dev); - - dev->ops->init = mainboard_init; // rest of mainboard init later - dev->ops->acpi_inject_dsdt_generator = mainboard_inject_dsdt; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.h b/src/mainboard/siemens/sitemp_g1p1/mainboard.h deleted file mode 100644 index 33d0a5e68e..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.h +++ /dev/null @@ -1 +0,0 @@ -void mainboard_inject_dsdt(device_t device); diff --git a/src/mainboard/siemens/sitemp_g1p1/mptable.c b/src/mainboard/siemens/sitemp_g1p1/mptable.c deleted file mode 100644 index 3515d304fb..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/mptable.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <arch/io.h> -#include <string.h> -#include <stdint.h> - -#include <cpu/amd/amdk8_sysconf.h> - -extern u8 bus_rs690[8]; -extern u8 bus_sb600[2]; - -extern u32 apicid_sb600; - -extern u32 sbdn_rs690; -extern u32 sbdn_sb600; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int isa_bus; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - mptable_init(mc, LOCAL_APIC_ADDR); - smp_write_processors(mc); - - get_bus_conf(); - printk(BIOS_DEBUG, "%s: apic_id=0x%x\n", __func__, apicid_sb600); - - mptable_write_buses(mc, NULL, &isa_bus); - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - - dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 0)); - if (dev) { - struct resource *res; - res = find_resource(dev, 0x74); - smp_write_ioapic(mc, apicid_sb600, 0x20, - res2mmio(res, 0, 0)); - } - } - mptable_add_isa_interrupts(mc, isa_bus, apicid_sb600, 0); - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin)) - - /* usb */ - PCI_INT(0x0, 0x13, 0x0, 0x10); - PCI_INT(0x0, 0x13, 0x1, 0x11); - PCI_INT(0x0, 0x13, 0x2, 0x12); - PCI_INT(0x0, 0x13, 0x3, 0x13); - - /* sata */ - PCI_INT(0x0, 0x12, 0x1, 0x16); - - /* SMBus/ACPI */ - PCI_INT(0x0, 0x14, 0x0, 0x10); - /* IDE */ - PCI_INT(0x0, 0x14, 0x1, 0x11); - /* HDA */ - PCI_INT(0x0, 0x14, 0x2, 0x12); - /* LPC */ - PCI_INT(0x0, 0x14, 0x3, 0x13); - - /* GFX ? */ - PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12); - PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13); - - /* PCIe slots */ - PCI_INT(0x2, 0x00, 0x00, 0x10); - PCI_INT(0x2, 0x00, 0x01, 0x11); - PCI_INT(0x2, 0x00, 0x02, 0x12); - PCI_INT(0x2, 0x00, 0x03, 0x13); - - /* PCIe slots */ - PCI_INT(0x3, 0x00, 0x00, 0x11); - PCI_INT(0x3, 0x00, 0x01, 0x12); - PCI_INT(0x3, 0x00, 0x02, 0x13); - PCI_INT(0x3, 0x00, 0x03, 0x10); - - /* PCIe slots */ - PCI_INT(0x4, 0x00, 0x00, 0x12); - PCI_INT(0x4, 0x00, 0x01, 0x13); - PCI_INT(0x4, 0x00, 0x02, 0x10); - PCI_INT(0x4, 0x00, 0x03, 0x11); - - /* PCIe slots */ - PCI_INT(0x5, 0x00, 0x00, 0x13); - PCI_INT(0x5, 0x00, 0x01, 0x10); - PCI_INT(0x5, 0x00, 0x02, 0x11); - PCI_INT(0x5, 0x00, 0x03, 0x12); - - /* onboard NIC ? */ - PCI_INT(bus_sb600[1], 0x7, 0x0, 0x13); - PCI_INT(bus_sb600[1], 0x7, 0x1, 0x10); - PCI_INT(bus_sb600[1], 0x7, 0x2, 0x11); - PCI_INT(bus_sb600[1], 0x7, 0x3, 0x12); - - /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, isa_bus); - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/resourcemap.c b/src/mainboard/siemens/sitemp_g1p1/resourcemap.c deleted file mode 100644 index 84e107b8b3..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/resourcemap.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -static void setup_sitemp_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/siemens/sitemp_g1p1/romstage.c b/src/mainboard/siemens/sitemp_g1p1/romstage.c deleted file mode 100644 index 5f910ea4b2..0000000000 --- a/src/mainboard/siemens/sitemp_g1p1/romstage.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2010 Siemens AG, Inc. - * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <spd.h> - -#include <cpu/amd/model_fxx_rev.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <cpu/x86/lapic.h> -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> - -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#include "southbridge/amd/rs690/early_setup.c" -#include "southbridge/amd/sb600/early_setup.c" -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, CONFIG_UART_FOR_CONSOLE == 1 ? IT8712F_SP2 : IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/ -void memreset(int controllers, const struct mem_controller *ctrl) -{ -} - -/* called in raminit_f.c */ -void activate_spd_rom(const struct mem_controller *ctrl) -{ -} - -/*called in raminit_f.c */ -int spd_read_byte(u32 device, u32 address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define __WARNING__(fmt, arg...) do_printk(BIOS_WARNING ,fmt, ##arg) -#define __DEBUG__(fmt, arg...) do_printk(BIOS_DEBUG ,fmt, ##arg) -#define __INFO__(fmt, arg...) do_printk(BIOS_INFO ,fmt, ##arg) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, }; - int needs_reset = 0; - u32 bsp_apicid = 0; - msr_t msr; - struct cpuid_result cpuid1; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - /* sb600_lpc_port80(); */ - sb600_pci_port80(); - } - - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - enable_rs690_dev8(); // enable CFG access to Dev8, which is the SB P2P Bridge - sb600_lpc_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 0) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - - console_init(); -#if defined(DUMP_CMOS_RAM) && (DUMP_CMOS_RAM == 1) - check_cmos(); // rebooting in case of corrupted cmos !!!!! -#endif - post_code(0x03); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - __DEBUG__("bsp_apicid=0x%x\n", bsp_apicid); - - setup_sitemp_resource_map(); - - setup_coherent_ht_domain(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched */ - wait_all_core0_started(); - start_other_cores(); -#endif - wait_all_aps_started(bsp_apicid); - - ht_setup_chains_x(sysinfo); - - /* run _early_setup before soft-reset. */ - rs690_early_setup(); - sb600_early_setup(); - - post_code(0x04); - - /* Check to see if processor is capable of changing FIDVID */ - /* otherwise it will throw a GP# when reading FIDVID_STATUS */ - cpuid1 = cpuid(0x80000007); - if( (cpuid1.edx & 0x6) == 0x6 ) { - - /* Read FIDVID_STATUS */ - msr = rdmsr(0xc0010042); - __DEBUG__("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - - /* show final fid and vid */ - msr = rdmsr(0xc0010042); - __DEBUG__("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo); - - } else { - __DEBUG__("Changing FIDVID not supported\n"); - } - - post_code(0x05); - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - rs690_htinit(); - __DEBUG__("needs_reset=0x%x\n", needs_reset); - - post_code(0x06); - - if (needs_reset) { - __INFO__("ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now; */ - __DEBUG__("sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n", - sysinfo->nodes, sysinfo->ctrl, spd_addr); - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - post_code(0x07); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - - post_code(0x08); - - rs690_before_pci_init(); // does nothing - sb600_before_pci_init(); -} |