diff options
Diffstat (limited to 'src/mainboard/razer/blade_stealth_kbl/devicetree.cb')
-rw-r--r-- | src/mainboard/razer/blade_stealth_kbl/devicetree.cb | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/src/mainboard/razer/blade_stealth_kbl/devicetree.cb b/src/mainboard/razer/blade_stealth_kbl/devicetree.cb new file mode 100644 index 0000000000..deb98690f8 --- /dev/null +++ b/src/mainboard/razer/blade_stealth_kbl/devicetree.cb @@ -0,0 +1,277 @@ +chip soc/intel/skylake + # Enable deep Sx states + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + register "eist_enable" = "1" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + register "gen1_dec" = "0x000c0081" + register "gen2_dec" = "0x000c0681" + register "gen3_dec" = "0x000c1641" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Disable DPTF + register "dptf_enable" = "0" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + register "SataPortsEnable[1]" = "0" + register "SataPortsEnable[2]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "0" + register "IoBufferOwnership" = "0" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "PttSwitch" = "0" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "1" + register "SaGv" = "SaGv_Enabled" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "3" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "0" + + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-----------+-----------+-------------+----------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-----------+-----------+-------------+----------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 6A | 64A | 31A | 31A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-----------+-----------+-------------+----------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 0, + .psi4enable = 0, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(6), + .voltage_limit = 1520, + .ac_loadline = 1030, + .dc_loadline = 1030, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 0, + .psi4enable = 0, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(64), + .voltage_limit = 1520, + .ac_loadline = 240, + .dc_loadline = 240, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 0, + .psi4enable = 0, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(31), + .voltage_limit = 1520, + .ac_loadline = 310, + .dc_loadline = 310, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 0, + .psi4enable = 0, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(31), + .voltage_limit = 1520, + .ac_loadline = 310, + .dc_loadline = 310, + }" + + # Enable Root Ports 3, 5 and 9 + register "PcieRpEnable[2]" = "1" + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[8]" = "1" + + register "PcieRpLtrEnable[2]" = "1" + register "PcieRpLtrEnable[4]" = "1" + register "PcieRpLtrEnable[8]" = "1" + + register "PcieRpHotPlug[4]" = "1" + + # USB + register "usb2_ports[0]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (left) + + register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # TODO Unknown. Maybe USBC? + register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" # TODO Unknown. Maybe USBC? + register "usb2_ports[4]" = "USB2_PORT_MID(OC1)" # TODO Unknown. Maybe USBC? + register "usb2_ports[5]" = "USB2_PORT_MID(OC1)" # TODO Unknown. Maybe USBC? + + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC2)" # Camera + register "usb2_ports[7]" = "USB2_PORT_FLEX(OC2)" # Keyboard + register "usb2_ports[8]" = "USB2_PORT_FLEX(OC2)" # Touchscreen + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (left) + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" # TODO Unknown. Maybe USBC? + + # PL1 override 25W + register "tdp_pl1_override" = "25" + + # PL2 override 44W + register "tdp_pl2_override" = "44" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoDisabled, \ + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 04.0 off end # Thermal Subsystem + device pci 08.0 off end # Gaussian Mixture Model + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C Controller #0 + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end + end # I2C Controller #1 + device pci 15.2 off end # I2C Controller #2 + device pci 15.3 off end # I2C Controller #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # I2C Controller #4 + device pci 19.1 off end # I2C Controller #5 + device pci 19.2 off end # UART #2 + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 on end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # Serial IO UART0 + device pci 1f.0 on # LPC + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + chip superio/ite/it8528e + device pnp 6e.1 off end + device pnp 6e.2 off end + device pnp 6e.3 off end + device pnp 6e.4 off end + device pnp 6e.5 off end + device pnp 6e.6 off end + device pnp 6e.a off end + device pnp 6e.f off end + device pnp 6e.10 off end + device pnp 6e.11 off end + device pnp 6e.12 off end + device pnp 6e.13 off end + device pnp 6e.14 off end + device pnp 6e.17 off end + device pnp 6e.18 off end + device pnp 6e.19 off end + end #superio/ite/it8528e + end # LPC Bridge + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end |