diff options
Diffstat (limited to 'src/mainboard/prodrive')
| -rw-r--r-- | src/mainboard/prodrive/hermes/Kconfig | 3 | ||||
| -rw-r--r-- | src/mainboard/prodrive/hermes/devicetree.cb | 197 | ||||
| -rw-r--r-- | src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb | 204 |
3 files changed, 193 insertions, 211 deletions
diff --git a/src/mainboard/prodrive/hermes/Kconfig b/src/mainboard/prodrive/hermes/Kconfig index bdb8e497b2..2fecc06f6d 100644 --- a/src/mainboard/prodrive/hermes/Kconfig +++ b/src/mainboard/prodrive/hermes/Kconfig @@ -51,9 +51,6 @@ config MAX_CPUS int default 16 -config OVERRIDE_DEVICETREE - default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb" - config CONSOLE_POST bool default y diff --git a/src/mainboard/prodrive/hermes/devicetree.cb b/src/mainboard/prodrive/hermes/devicetree.cb index cafc81e6ba..69658211f9 100644 --- a/src/mainboard/prodrive/hermes/devicetree.cb +++ b/src/mainboard/prodrive/hermes/devicetree.cb @@ -1,4 +1,132 @@ chip soc/intel/cannonlake + # FSP configuration + + register "SataMode" = "0" # AHCI + register "SataSalpSupport" = "0" + register "satapwroptimize" = "1" + register "SataPortsDevSlp[1]" = "1" # PCH_M2_SATA_DEVSLP1 + + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" # depends on SATAXPCIE1 + register "SataPortsEnable[2]" = "0" # Not used for SATA + register "SataPortsEnable[3]" = "0" # Not used for SATA + register "SataPortsEnable[4]" = "1" + register "SataPortsEnable[5]" = "1" + register "SataPortsEnable[6]" = "1" + register "SataPortsEnable[7]" = "1" + + register "SataPortsHotPlug[0]" = "1" + register "SataPortsHotPlug[1]" = "1" + register "SataPortsHotPlug[2]" = "0" + register "SataPortsHotPlug[3]" = "0" + register "SataPortsHotPlug[4]" = "1" + register "SataPortsHotPlug[5]" = "1" + register "SataPortsHotPlug[6]" = "1" + register "SataPortsHotPlug[7]" = "1" + + register "PchHdaDspEnable" = "0" + register "PchHdaAudioLinkHda" = "1" + + # Controls the CLKREQ, not the output directly. + # Depends on the CLKREQ to CLK gen mapping below + register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE" # BMC, PCIe Slot1, Slot2, Slot4, Slot6 + register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE" # PHY3 + register "PcieClkSrcUsage[2]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[3]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE" # RP9 M2 Slot M x4 + register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE" # RP16 M2 Slot E x1 + register "PcieClkSrcUsage[6]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[7]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[8]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[9]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[10]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[11]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[12]" = "PCIE_CLK_NOTUSED" + register "PcieClkSrcUsage[13]" = "PCIE_CLK_FREE" # PHY 0, PHY 1, PHY 2, PHY 4 + register "PcieClkSrcUsage[14]" = "PCIE_CLK_FREE" # PB + register "PcieClkSrcUsage[15]" = "PCIE_CLK_FREE" # PCIe Slot3 + + # Only map M2 CLKREQ to CLK gen + register "PcieClkSrcClkReq[4]" = "4" # M2_M_CLK_REQ_n + register "PcieClkSrcClkReq[5]" = "5" # M2_E_CLK_REQ_n + + # USB OC5-7: not connected + register "usb2_ports" = "{ + +#define HERMES_USB2_CONFIG(pin) { \ + .enable = 1, \ + .ocpin = (pin), \ + .tx_bias = USB2_BIAS_0MV, \ + .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \ + .pre_emp_bias = USB2_BIAS_28P15MV, \ + .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \ +} + [0] = HERMES_USB2_CONFIG(OC0), /* USB3 rear panel 1 */ + [1] = HERMES_USB2_CONFIG(OC0), + [2] = HERMES_USB2_CONFIG(OC1), /* USB3 rear panel 2 */ + [3] = HERMES_USB2_CONFIG(OC1), + [4] = HERMES_USB2_CONFIG(OC2), /* USB3 internal header CN_USB3_HDR */ + [5] = HERMES_USB2_CONFIG(OC2), + [6] = HERMES_USB2_CONFIG(OC3), /* USB2 internal header USB2_HDR1 */ + [7] = HERMES_USB2_CONFIG(OC3), + [8] = HERMES_USB2_CONFIG(OC4), /* USB2 internal header USB2_HDR1 */ + [9] = HERMES_USB2_CONFIG(OC4), + [10] = HERMES_USB2_CONFIG(OC_SKIP), /* BMC */ + [11] = USB2_PORT_EMPTY, + [12] = HERMES_USB2_CONFIG(OC_SKIP), /* piggy-back */ + [13] = HERMES_USB2_CONFIG(OC_SKIP), /* M.2 key E */ + }" + + # USB Config 2.0/3.0 + # Enumeration starts at 0 + # USB 3.0 + # USB OC0: RP1 + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + + # USB OC1: RP2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" + + # USB OC2: Internal Header CN_USB3_HDR + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" + + # Thermal + register "tcc_offset" = "1" # TCC of 99C + + # Disable S0ix + register "s0ix_enable" = "0" + + # Enable Turbo + register "eist_enable" = "1" + + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + }" + + # VR Power Delivery Design + register "VrPowerDeliveryDesign" = "0x12" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoDisabled, + [PchSerialIoIndexI2C1] = PchSerialIoDisabled, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoPci, + [PchSerialIoIndexUART1] = PchSerialIoPci, + [PchSerialIoIndexUART2] = PchSerialIoPci, + }" + + register "DisableHeciRetry" = "1" + device cpu_cluster 0 on device lapic 0 on end end @@ -14,24 +142,86 @@ chip soc/intel/cannonlake device pci 01.2 on # PEG x4 or disabled / Slot 4 smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT4" "SlotDataBusWidth4X" end + device pci 02.0 on end # Integrated Graphics Device device pci 04.0 on end # SA Thermal device device pci 08.0 on end # Gaussian Mixture device pci 12.0 on end # Thermal Subsystem device pci 14.0 on end # USB xHCI device pci 14.1 off end # USB xDCI (OTG) device pci 14.2 on end # RAM controller + device pci 14.3 on + chip drivers/wifi/generic + register "wake" = "PME_B0_EN_BIT" + device generic 0 on end + end + end # CNVi wifi device pci 14.5 off end # SDCard - device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 on end # Management Engine Interface 2 device pci 16.4 off end # Management Engine Interface 3 device pci 17.0 on end # SATA - device pci 1d.6 on # PCIe root port 15 - device pci 00.0 on # Aspeed PCI Bridge + # This device does not have any function on CNP-H, but it needs + # to be here so that the resource allocator is aware of UART 2. + device pci 19.0 hidden end + chip soc/intel/common/block/uart + device pci 19.2 hidden + register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2" + end # UART #2, in ACPI mode + end + device pci 1b.4 on # PCIe root port 21 (Slot 1) + smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT1" "SlotDataBusWidth4X" + register "PcieRpEnable[20]" = "1" + register "PcieRpLtrEnable[20]" = "1" + register "PcieRpSlotImplemented[20]" = "1" + register "PcieRpMaxPayload[20]" = "RpMaxPayload_256" + register "PcieRpAdvancedErrorReporting[20]" = "1" + register "PcieRpAspm[20]" = "AspmDisabled" + end + device pci 1c.0 on # PCIe root port 1 (Slot 3) + smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT3" "SlotDataBusWidth4X" + register "PcieRpEnable[0]" = "1" + register "PcieRpLtrEnable[0]" = "1" + register "PcieRpSlotImplemented[0]" = "1" + register "PcieRpMaxPayload[0]" = "RpMaxPayload_256" + register "PcieRpAdvancedErrorReporting[0]" = "1" + register "PcieRpAspm[0]" = "AspmDisabled" + end + device pci 1c.4 on # PCIe root port 5 (PHY 3) + register "PcieRpEnable[4]" = "1" + end + device pci 1c.5 on # PCIe root port 6 (PHY 4) + register "PcieRpEnable[5]" = "1" + end + device pci 1c.6 on # PCIe root port 7 (PHY 2) + register "PcieRpEnable[6]" = "1" + end + device pci 1c.7 on # PCIe root port 8 (PHY 1) + register "PcieRpEnable[7]" = "1" + end + device pci 1d.0 on # PCIe root port 9 (M2 M) + smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "M2 M" "SlotDataBusWidth4X" + register "PcieRpEnable[8]" = "1" + register "PcieRpSlotImplemented[8]" = "1" + end + device pci 1d.5 on # PCIe root port 14 (PHY 0) + register "PcieRpEnable[13]" = "1" + end + device pci 1d.6 on # PCIe root port 15 (BMC) + device pci 00.0 on # Aspeed PCI Bridge device pci 00.0 on end # Aspeed 2500 VGA end + register "PcieRpEnable[14]" = "1" register "PcieRpSlotImplemented[14]" = "1" end + device pci 1d.7 on # PCIe root port 16 (M.2 E/CNVi) + # Disabled when CNVi is present + register "PcieRpEnable[15]" = "1" + register "PcieRpSlotImplemented[15]" = "1" + end + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 device pci 1f.0 on # LPC Interface chip drivers/pc80/tpm device pnp 0c31.0 on end @@ -44,5 +234,4 @@ chip soc/intel/cannonlake device pci 1f.4 on end # SMBus device pci 1f.5 on end # PCH SPI end - end diff --git a/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb b/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb deleted file mode 100644 index 16ba724e9e..0000000000 --- a/src/mainboard/prodrive/hermes/variants/baseboard/overridetree.cb +++ /dev/null @@ -1,204 +0,0 @@ -chip soc/intel/cannonlake - - device cpu_cluster 0 on - device lapic 0 on end - end - - # FSP configuration - - register "SataMode" = "0" # AHCI - register "SataSalpSupport" = "0" - register "satapwroptimize" = "1" - register "SataPortsDevSlp[1]" = "1" # PCH_M2_SATA_DEVSLP1 - - register "SataPortsEnable[0]" = "1" - register "SataPortsEnable[1]" = "1" # depends on SATAXPCIE1 - register "SataPortsEnable[2]" = "0" # Not used for SATA - register "SataPortsEnable[3]" = "0" # Not used for SATA - register "SataPortsEnable[4]" = "1" - register "SataPortsEnable[5]" = "1" - register "SataPortsEnable[6]" = "1" - register "SataPortsEnable[7]" = "1" - - register "SataPortsHotPlug[0]" = "1" - register "SataPortsHotPlug[1]" = "1" - register "SataPortsHotPlug[2]" = "0" - register "SataPortsHotPlug[3]" = "0" - register "SataPortsHotPlug[4]" = "1" - register "SataPortsHotPlug[5]" = "1" - register "SataPortsHotPlug[6]" = "1" - register "SataPortsHotPlug[7]" = "1" - - register "PchHdaDspEnable" = "0" - register "PchHdaAudioLinkHda" = "1" - - # Controls the CLKREQ, not the output directly. - # Depends on the CLKREQ to CLK gen mapping below - register "PcieClkSrcUsage[0]" = "PCIE_CLK_FREE" # BMC, PCIe Slot1, Slot2, Slot4, Slot6 - register "PcieClkSrcUsage[1]" = "PCIE_CLK_FREE" # PHY3 - register "PcieClkSrcUsage[2]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[3]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[4]" = "PCIE_CLK_FREE" # RP9 M2 Slot M x4 - register "PcieClkSrcUsage[5]" = "PCIE_CLK_FREE" # RP16 M2 Slot E x1 - register "PcieClkSrcUsage[6]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[7]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[8]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[9]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[10]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[11]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[12]" = "PCIE_CLK_NOTUSED" - register "PcieClkSrcUsage[13]" = "PCIE_CLK_FREE" # PHY 0, PHY 1, PHY 2, PHY 4 - register "PcieClkSrcUsage[14]" = "PCIE_CLK_FREE" # PB - register "PcieClkSrcUsage[15]" = "PCIE_CLK_FREE" # PCIe Slot3 - - # Only map M2 CLKREQ to CLK gen - register "PcieClkSrcClkReq[4]" = "4" # M2_M_CLK_REQ_n - register "PcieClkSrcClkReq[5]" = "5" # M2_E_CLK_REQ_n - - # USB OC5-7: not connected - register "usb2_ports" = "{ - -#define HERMES_USB2_CONFIG(pin) { \ - .enable = 1, \ - .ocpin = (pin), \ - .tx_bias = USB2_BIAS_0MV, \ - .tx_emp_enable = USB2_DE_EMP_ON_PRE_EMP_ON, \ - .pre_emp_bias = USB2_BIAS_28P15MV, \ - .pre_emp_bit = USB2_FULL_BIT_PRE_EMP, \ -} - [0] = HERMES_USB2_CONFIG(OC0), /* USB3 rear panel 1 */ - [1] = HERMES_USB2_CONFIG(OC0), - [2] = HERMES_USB2_CONFIG(OC1), /* USB3 rear panel 2 */ - [3] = HERMES_USB2_CONFIG(OC1), - [4] = HERMES_USB2_CONFIG(OC2), /* USB3 internal header CN_USB3_HDR */ - [5] = HERMES_USB2_CONFIG(OC2), - [6] = HERMES_USB2_CONFIG(OC3), /* USB2 internal header USB2_HDR1 */ - [7] = HERMES_USB2_CONFIG(OC3), - [8] = HERMES_USB2_CONFIG(OC4), /* USB2 internal header USB2_HDR1 */ - [9] = HERMES_USB2_CONFIG(OC4), - [10] = HERMES_USB2_CONFIG(OC_SKIP), /* BMC */ - [11] = USB2_PORT_EMPTY, - [12] = HERMES_USB2_CONFIG(OC_SKIP), /* piggy-back */ - [13] = HERMES_USB2_CONFIG(OC_SKIP), /* M.2 key E */ - }" - - # USB Config 2.0/3.0 - # Enumeration starts at 0 - # USB 3.0 - # USB OC0: RP1 - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" - - # USB OC1: RP2 - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" - - # USB OC2: Internal Header CN_USB3_HDR - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" - - # Thermal - register "tcc_offset" = "1" # TCC of 99C - - - # Disable S0ix - register "s0ix_enable" = "0" - - # Enable Turbo - register "eist_enable" = "1" - - register "common_soc_config" = "{ - .gspi[0] = { - .speed_mhz = 1, - .early_init = 1, - }, - }" - - # VR Power Delivery Design - register "VrPowerDeliveryDesign" = "0x12" - - register "SerialIoDevMode" = "{ - [PchSerialIoIndexI2C0] = PchSerialIoDisabled, - [PchSerialIoIndexI2C1] = PchSerialIoDisabled, - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, - [PchSerialIoIndexI2C4] = PchSerialIoDisabled, - [PchSerialIoIndexI2C5] = PchSerialIoDisabled, - [PchSerialIoIndexSPI0] = PchSerialIoPci, - [PchSerialIoIndexSPI1] = PchSerialIoDisabled, - [PchSerialIoIndexUART0] = PchSerialIoPci, - [PchSerialIoIndexUART1] = PchSerialIoPci, - [PchSerialIoIndexUART2] = PchSerialIoPci, - }" - - register "DisableHeciRetry" = "1" - - device domain 0 on - device pci 02.0 on end # Integrated Graphics Device - device pci 14.3 on - chip drivers/wifi/generic - register "wake" = "PME_B0_EN_BIT" - device generic 0 on end - end - end # CNVi wifi - - # This device does not have any function on CNP-H, but it needs - # to be here so that the resource allocator is aware of UART 2. - device pci 19.0 hidden end - chip soc/intel/common/block/uart - device pci 19.2 hidden - register "devid" = "PCI_DEVICE_ID_INTEL_CNP_H_UART2" - end # UART #2, in ACPI mode - end - device pci 1b.4 on # PCIe root port 21 (Slot 1) - smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT1" "SlotDataBusWidth4X" - register "PcieRpEnable[20]" = "1" - register "PcieRpLtrEnable[20]" = "1" - register "PcieRpSlotImplemented[20]" = "1" - register "PcieRpMaxPayload[20]" = "RpMaxPayload_256" - register "PcieRpAdvancedErrorReporting[20]" = "1" - register "PcieRpAspm[20]" = "AspmDisabled" - end - device pci 1c.0 on # PCIe root port 1 (Slot 3) - smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "SLOT3" "SlotDataBusWidth4X" - register "PcieRpEnable[0]" = "1" - register "PcieRpLtrEnable[0]" = "1" - register "PcieRpSlotImplemented[0]" = "1" - register "PcieRpMaxPayload[0]" = "RpMaxPayload_256" - register "PcieRpAdvancedErrorReporting[0]" = "1" - register "PcieRpAspm[0]" = "AspmDisabled" - end - device pci 1c.4 on # PCIe root port 5 (PHY 3) - register "PcieRpEnable[4]" = "1" - end - device pci 1c.5 on # PCIe root port 6 (PHY 4) - register "PcieRpEnable[5]" = "1" - end - device pci 1c.6 on # PCIe root port 7 (PHY 2) - register "PcieRpEnable[6]" = "1" - end - device pci 1c.7 on # PCIe root port 8 (PHY 1) - register "PcieRpEnable[7]" = "1" - end - device pci 1d.0 on # PCIe root port 9 (M2 M) - smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthOther" "M2 M" "SlotDataBusWidth4X" - register "PcieRpEnable[8]" = "1" - register "PcieRpSlotImplemented[8]" = "1" - end - device pci 1d.5 on # PCIe root port 14 (PHY 0) - register "PcieRpEnable[13]" = "1" - end - device pci 1d.6 on # PCIe root port 15 (BMC) - register "PcieRpEnable[14]" = "1" - end - device pci 1d.7 on # PCIe root port 16 (M.2 E/CNVi) - # Disabled when CNVi is present - register "PcieRpEnable[15]" = "1" - register "PcieRpSlotImplemented[15]" = "1" - end - device pci 1e.0 on end # UART #0 - device pci 1e.1 on end # UART #1 - device pci 1e.2 off end # GSPI #0 - device pci 1e.3 off end # GSPI #1 - end -end |