diff options
Diffstat (limited to 'src/mainboard/pcengines/apu1')
| -rw-r--r-- | src/mainboard/pcengines/apu1/OemCustomize.c | 29 | ||||
| -rw-r--r-- | src/mainboard/pcengines/apu1/buildOpts.c | 90 |
2 files changed, 29 insertions, 90 deletions
diff --git a/src/mainboard/pcengines/apu1/OemCustomize.c b/src/mainboard/pcengines/apu1/OemCustomize.c index d3dd403cb5..20acb272ac 100644 --- a/src/mainboard/pcengines/apu1/OemCustomize.c +++ b/src/mainboard/pcengines/apu1/OemCustomize.c @@ -19,6 +19,7 @@ #include <string.h> #include <northbridge/amd/agesa/agesawrapper.h> #include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h> +#include <PlatformMemoryConfiguration.h> /** * OemCustomizeInitEarly @@ -126,6 +127,34 @@ PCIe_COMPLEX_DESCRIPTOR Brazos = { return AGESA_SUCCESS; } +/*---------------------------------------------------------------------------------------- + * CUSTOMER OVERIDES MEMORY TABLE + *---------------------------------------------------------------------------------------- + */ + +/* + * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA + * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable + * is populated, AGESA will base its settings on the data from the table. Otherwise, it will + * use its default conservative settings. + */ +CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { + + NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), + NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), + + // APU soldered down memory uses memory CLK0 and CLK1 on CS0 + MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), + + // APU soldered down memory requires different seeds +#define WLSEED 0x08 +#define RXSEED 0x40 + WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), + HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), + + PSO_END +}; + const struct OEM_HOOK OemCustomize = { .InitEarly = OemInitEarly, }; diff --git a/src/mainboard/pcengines/apu1/buildOpts.c b/src/mainboard/pcengines/apu1/buildOpts.c index 50cf4cfa86..edfdd301a1 100644 --- a/src/mainboard/pcengines/apu1/buildOpts.c +++ b/src/mainboard/pcengines/apu1/buildOpts.c @@ -309,93 +309,3 @@ CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] = // Instantiate all solution relevant data. #include "PlatformInstall.h" - -/*---------------------------------------------------------------------------------------- - * CUSTOMER OVERIDES MEMORY TABLE - *---------------------------------------------------------------------------------------- - */ - -/* - * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA - * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable - * is populated, AGESA will base its settings on the data from the table. Otherwise, it will - * use its default conservative settings. - */ -CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { - // - // The following macros are supported (use comma to separate macros): - // - // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) - // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. - // AGESA will base on this value to disable unused MemClk to save power. - // Example: - // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: - // Bit AM3/S1g3 pin name - // 0 M[B,A]_CLK_H/L[0] - // 1 M[B,A]_CLK_H/L[1] - // 2 M[B,A]_CLK_H/L[2] - // 3 M[B,A]_CLK_H/L[3] - // 4 M[B,A]_CLK_H/L[4] - // 5 M[B,A]_CLK_H/L[5] - // 6 M[B,A]_CLK_H/L[6] - // 7 M[B,A]_CLK_H/L[7] - // And platform has the following routing: - // CS0 M[B,A]_CLK_H/L[4] - // CS1 M[B,A]_CLK_H/L[2] - // CS2 M[B,A]_CLK_H/L[3] - // CS3 M[B,A]_CLK_H/L[5] - // Then platform can specify the following macro: - // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) - // - // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) - // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. - // AGESA will base on this value to tristate unused CKE to save power. - // - // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) - // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. - // AGESA will base on this value to tristate unused ODT pins to save power. - // - // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) - // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. - // AGESA will base on this value to tristate unused Chip select to save power. - // - // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) - // Specifies the number of DIMM slots per channel. - // - // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) - // Specifies the number of Chip selects per channel. - // - // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) - // Specifies the number of channels per socket. - // - // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) - // Specifies DDR bus speed of channel ChannelID on socket SocketID. - // - // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) - // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) - // - // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, - // Byte6Seed, Byte7Seed, ByteEccSeed) - // Specifies the write leveling seed for a channel of a socket. - // - - NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, TWO_DIMM), - NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM), - - // APU soldered down memory uses memory CLK0 and CLK1 on CS0 - MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), - - // APU soldered down memory requires different seeds -#define WLSEED 0x08 -#define RXSEED 0x40 - WRITE_LEVELING_SEED(ANY_SOCKET, ANY_CHANNEL, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED, WLSEED), - HW_RXEN_SEED( ANY_SOCKET, ANY_CHANNEL, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED, RXSEED), - - PSO_END -}; - -/* - * These tables are optional and may be used to adjust memory timing settings - */ -#include "mm.h" -#include "mn.h" |