diff options
Diffstat (limited to 'src/mainboard/pcengines/apu1/devicetree.cb')
| -rw-r--r-- | src/mainboard/pcengines/apu1/devicetree.cb | 137 |
1 files changed, 68 insertions, 69 deletions
diff --git a/src/mainboard/pcengines/apu1/devicetree.cb b/src/mainboard/pcengines/apu1/devicetree.cb index 72e89c0b31..6af6d2e6de 100644 --- a/src/mainboard/pcengines/apu1/devicetree.cb +++ b/src/mainboard/pcengines/apu1/devicetree.cb @@ -15,79 +15,78 @@ # chip northbridge/amd/agesa/family14/root_complex device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end + chip cpu/amd/agesa/family14 + device lapic 0 on end + end end device domain 0 on subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] - device pci 4.0 on end # PCIE P2P bridge on-board NIC 3 - device pci 5.0 on end # PCIE P2P bridge on-board NIC 2 - device pci 6.0 on end # PCIE P2P bridge on-board NIC 1 - device pci 7.0 on end # PCIE P2P bridge miniPCIe slot 1 - device pci 8.0 on end # NB/SB Link P2P bridge - end # agesa northbridge + chip northbridge/amd/agesa/family14 + device pci 0.0 on end # Root Complex + device pci 1.0 off end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC 3 + device pci 5.0 on end # PCIE P2P bridge on-board NIC 2 + device pci 6.0 on end # PCIE P2P bridge on-board NIC 1 + device pci 7.0 on end # PCIE P2P bridge miniPCIe slot 1 + device pci 8.0 on end # NB/SB Link P2P bridge + end # agesa northbridge - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on end # SMBus - device pci 14.1 off end # IDE 0x439c - device pci 14.2 off end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/nuvoton/nct5104d - register "irq_trigger_type" = "0" - device pnp 2e.0 off end - device pnp 2e.2 on - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 on - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.10 off - # UART C is conditionally turned on - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.11 off - # UART D is conditionally turned on - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.8 off end - device pnp 2e.f off end - # GPIO0 and GPIO1 are conditionally turned on - device pnp 2e.007 off end - device pnp 2e.107 off end - device pnp 2e.607 off end - device pnp 2e.e off end + chip southbridge/amd/cimx/sb800 + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on end # SMBus + device pci 14.1 off end # IDE 0x439c + device pci 14.2 off end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/nuvoton/nct5104d + register "irq_trigger_type" = "0" + device pnp 2e.0 off end + device pnp 2e.2 on + io 0x60 = 0x3f8 + irq 0x70 = 4 end - end #LPC - device pci 14.4 on end # PCIB 0x4384 always active; pins remapped to gpio by disconnect_pcib = 1 - device pci 14.5 off end # OHCI FS/LS USB - #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA miniPCIe slot 2 - device pci 15.1 off end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 - register "disconnect_pcib" = "1" - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary + device pnp 2e.3 on + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.10 off + # UART C is conditionally turned on + io 0x60 = 0x3e8 + irq 0x70 = 4 + end + device pnp 2e.11 off + # UART D is conditionally turned on + io 0x60 = 0x2e8 + irq 0x70 = 3 + end + device pnp 2e.8 off end + device pnp 2e.f off end + # GPIO0 and GPIO1 are conditionally turned on + device pnp 2e.007 off end + device pnp 2e.107 off end + device pnp 2e.607 off end + device pnp 2e.e off end + end + end #LPC + device pci 14.4 on end # PCIB 0x4384 always active; pins remapped to gpio by disconnect_pcib = 1 + device pci 14.5 off end # OHCI FS/LS USB + #device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA miniPCIe slot 2 + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 + register "disconnect_pcib" = "1" + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 + + chip northbridge/amd/agesa/family14 + # These seem unnecessary device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end @@ -96,7 +95,7 @@ chip northbridge/amd/agesa/family14/root_complex device pci 18.5 on end device pci 18.6 on end device pci 18.7 on end + end # agesa northbridge - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex end #domain end #northbridge/amd/agesa/family14/root_complex |