4 files changed, 24 insertions, 24 deletions
diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb
index a0add90240..889bee52cb 100644
--- a/src/mainboard/olpc/btest/Config.lb
+++ b/src/mainboard/olpc/btest/Config.lb
@@ -1,6 +1,6 @@
 ##
 ## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
 ##
 if USE_FALLBACK_IMAGE
 	default ROM_SECTION_SIZE   = FALLBACK_SIZE
@@ -12,18 +12,18 @@ end
 
 ##
 ## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
 ##
 default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 
 ##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
 ##
 default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
 
 ##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
 ## execution speed.
 ##
 ## XIP_ROM_SIZE must be a power of 2.
@@ -70,7 +70,7 @@ makerule ./auto.inc
 end
 
 ##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
 ##
 mainboardinit cpu/x86/16bit/entry16.inc
 mainboardinit cpu/x86/32bit/entry32.inc
@@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds
 ldscript /cpu/x86/32bit/entry32.lds
 
 ##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
 ##
 if USE_FALLBACK_IMAGE 
 	mainboardinit cpu/x86/16bit/reset16.inc 
@@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
 ###
-### This is the early phase of linuxBIOS startup 
+### This is the early phase of coreboot startup 
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
diff --git a/src/mainboard/olpc/btest/Options.lb b/src/mainboard/olpc/btest/Options.lb
index 7d27ddc369..096a0ca6a7 100644
--- a/src/mainboard/olpc/btest/Options.lb
+++ b/src/mainboard/olpc/btest/Options.lb
@@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT
 uses MAINBOARD
 uses MAINBOARD_VENDOR
 uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses ARCH
 uses FALLBACK_SIZE
 uses STACK_SIZE
@@ -61,7 +61,7 @@ default HAVE_FALLBACK_BOOT=1
 default HAVE_MP_TABLE=0
 
 ##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
 ##
 default HAVE_HARD_RESET=0
 
@@ -83,10 +83,10 @@ default IRQ_SLOT_COUNT=2
 default HAVE_OPTION_TABLE=0
 
 ###
-### LinuxBIOS layout values
+### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
 default ROM_IMAGE_SIZE = 65536
 default FALLBACK_SIZE = 131072
 
@@ -142,7 +142,7 @@ default TTYS0_BASE=0x3f8
 default TTYS0_LCS=0x3
 
 ##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
 ##
 ## EMERG      1   system is unusable               
 ## ALERT      2   action must be taken immediately 
diff --git a/src/mainboard/olpc/rev_a/Config.lb b/src/mainboard/olpc/rev_a/Config.lb
index a0add90240..889bee52cb 100644
--- a/src/mainboard/olpc/rev_a/Config.lb
+++ b/src/mainboard/olpc/rev_a/Config.lb
@@ -1,6 +1,6 @@
 ##
 ## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
+## (coreboot plus bootloader) will live in the boot rom chip.
 ##
 if USE_FALLBACK_IMAGE
 	default ROM_SECTION_SIZE   = FALLBACK_SIZE
@@ -12,18 +12,18 @@ end
 
 ##
 ## Compute the start location and size size of
-## The linuxBIOS bootloader.
+## The coreboot bootloader.
 ##
 default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 
 ##
-## Compute where this copy of linuxBIOS will start in the boot rom
+## Compute where this copy of coreboot will start in the boot rom
 ##
 default _ROMBASE      = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
 
 ##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
+## Compute a range of ROM that can cached to speed up coreboot,
 ## execution speed.
 ##
 ## XIP_ROM_SIZE must be a power of 2.
@@ -70,7 +70,7 @@ makerule ./auto.inc
 end
 
 ##
-## Build our 16 bit and 32 bit linuxBIOS entry code
+## Build our 16 bit and 32 bit coreboot entry code
 ##
 mainboardinit cpu/x86/16bit/entry16.inc
 mainboardinit cpu/x86/32bit/entry32.inc
@@ -78,7 +78,7 @@ ldscript /cpu/x86/16bit/entry16.lds
 ldscript /cpu/x86/32bit/entry32.lds
 
 ##
-## Build our reset vector (This is where linuxBIOS is entered)
+## Build our reset vector (This is where coreboot is entered)
 ##
 if USE_FALLBACK_IMAGE 
 	mainboardinit cpu/x86/16bit/reset16.inc 
@@ -98,7 +98,7 @@ mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
 ###
-### This is the early phase of linuxBIOS startup 
+### This is the early phase of coreboot startup 
 ### Things are delicate and we test to see if we should
 ### failover to another image.
 ###
diff --git a/src/mainboard/olpc/rev_a/Options.lb b/src/mainboard/olpc/rev_a/Options.lb
index 7d27ddc369..096a0ca6a7 100644
--- a/src/mainboard/olpc/rev_a/Options.lb
+++ b/src/mainboard/olpc/rev_a/Options.lb
@@ -10,7 +10,7 @@ uses IRQ_SLOT_COUNT
 uses MAINBOARD
 uses MAINBOARD_VENDOR
 uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
+uses COREBOOT_EXTRA_VERSION
 uses ARCH
 uses FALLBACK_SIZE
 uses STACK_SIZE
@@ -61,7 +61,7 @@ default HAVE_FALLBACK_BOOT=1
 default HAVE_MP_TABLE=0
 
 ##
-## Build code to reset the motherboard from linuxBIOS
+## Build code to reset the motherboard from coreboot
 ##
 default HAVE_HARD_RESET=0
 
@@ -83,10 +83,10 @@ default IRQ_SLOT_COUNT=2
 default HAVE_OPTION_TABLE=0
 
 ###
-### LinuxBIOS layout values
+### coreboot layout values
 ###
 
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
 default ROM_IMAGE_SIZE = 65536
 default FALLBACK_SIZE = 131072
 
@@ -142,7 +142,7 @@ default TTYS0_BASE=0x3f8
 default TTYS0_LCS=0x3
 
 ##
-### Select the linuxBIOS loglevel
+### Select the coreboot loglevel
 ##
 ## EMERG      1   system is unusable               
 ## ALERT      2   action must be taken immediately