diff options
Diffstat (limited to 'src/mainboard/olpc/btest/Config.lb')
| -rw-r--r-- | src/mainboard/olpc/btest/Config.lb | 139 |
1 files changed, 0 insertions, 139 deletions
diff --git a/src/mainboard/olpc/btest/Config.lb b/src/mainboard/olpc/btest/Config.lb deleted file mode 100644 index 9edcbd066b..0000000000 --- a/src/mainboard/olpc/btest/Config.lb +++ /dev/null @@ -1,139 +0,0 @@ -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o - -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - -## -## Romcc output -## -makerule ./failover.E - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(CONFIG_MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc -mainboardinit ./auto.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/amd/gx2 - register "irqmap" = "0xaa5b" - register "setupflash" = "0" - device apic_cluster 0 on - chip cpu/amd/model_gx2 - device apic 0 on end - end - end - device pci_domain 0 on - device pci 1.0 on end - device pci 1.1 on end - chip southbridge/amd/cs5536 - # 0x51400025 (IRQ Mapper LPC Mask)= 0x00001002 - # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK - # 0x5140004E (LPC Serial IRQ Control) = 0xEFFD0080. - # Frame Pulse Width = 4clocks - # IRQ Data Frames = 17Frames - # SIRQ Mode = continous , It would be better if the EC could operate in - # Active(Quiet) mode. Save power.... - # SIRQ Enable = Enabled - # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK - #register "lpc_irq" = "0x00001002" - #register "lpc_serirq_enable" = "0xEFFD0080" - #register "enable_gpio0_inta" = "1" - #register "enable_ide_nand_flash" = "1" - #register "enable_uarta" = "1" - #register "enable_USBP4_host" = "1" - #register "audio_irq" = "5" - #register "usbf4_irq" = "10" - #register "usbf5_irq" = "10" - #register "usbf6_irq" = "0" - #register "usbf7_irq" = "0" - device pci d.0 on end # Realtek 8139 LAN - device pci f.0 on end # ISA Bridge - device pci f.2 on end # IDE Controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - register "unwanted_vpci[0]" = "0x80007E00" # USB/UDC - register "unwanted_vpci[1]" = "0x80007F00" # USB/OTG - register "unwanted_vpci[2]" = "0" # End of list has a zero - end - end -end - |