1 files changed, 49 insertions, 4 deletions
diff --git a/src/mainboard/nokia/ip530/devicetree.cb b/src/mainboard/nokia/ip530/devicetree.cb
index 673e0cb10d..3cfbc8fb0f 100644
--- a/src/mainboard/nokia/ip530/devicetree.cb
+++ b/src/mainboard/nokia/ip530/devicetree.cb
@@ -40,10 +40,55 @@ chip northbridge/intel/i440bx		# Northbridge
             io 0x60 = 0x2f8
             irq 0x70 = 3
           end
-          device pnp 3f0.6 on end	# RTC
-          device pnp 3f0.7 off end	# PS/2 keyboard / mouse (No connector)
-          device pnp 3f0.8 on end	# AUX I/O
-          device pnp 3f0.a off end	# ACPI (No support yet)
+          device pnp 3f0.6 on		# RTC
+            irq 0x63 = 0x72
+          end
+          device pnp 3f0.7 off 		# PS/2 keyboard / mouse (No connector)
+          end
+          device pnp 3f0.8 on		# AUX I/O
+            irq 0x24 = 0x84		# OSC
+
+            irq 0xB2 = 0x0C		# Soft power status 1
+            irq 0xB3 = 0x05		# Soft power status 2
+            irq 0xC0 = 0x03		# IRQ MUX control
+
+            irq 0xC8 = 0x10		# GP50 = (I/O) output = Flashrom enable
+            irq 0xCA = 0x09		# GP52 = IRQ8 (output)
+            irq 0xCB = 0x01		# GP53 = nROMCS (output)
+            irq 0xCC = 0x11		# GP54 = (I/O) input
+            irq 0xF9 = 0x00             # read/write GP5x lines (0x1C)
+
+            irq 0xD0 = 0x08		# GP60 = IRQ1
+            irq 0xD1 = 0x08		# GP61 = IRQ3
+            irq 0xD2 = 0x08		# GP62 = IRQ4
+            irq 0xD3 = 0x11		# GP63 = (I/O) input = JP901 on board
+            irq 0xD4 = 0x11		# GP64 = (I/O) input
+            irq 0xD5 = 0x11		# GP65 = (I/O) input
+            irq 0xD6 = 0x08		# GP66 = IRQ8
+            irq 0xD7 = 0x11		# GP67 = (I/O) input
+            irq 0xFA = 0x00		# read/write GP6x lines (0x88)
+
+            irq 0xE0 = 0x00		# GP10 (I/O) = output
+            irq 0xE1 = 0x01		# GP11 (I/O) = input
+            irq 0xE2 = 0x08		# GP12 = P17
+            irq 0xE3 = 0x00		# GP13 (I/O) = output = LED fault on front, active low
+            irq 0xE4 = 0x00		# GP14 (I/O) = output
+            irq 0xE5 = 0x00		# GP15 (I/O) = output
+            irq 0xE6 = 0x01		# GP16 (I/O) = input = JP900 on board, low on short, high on open
+            irq 0xE7 = 0x00 		# GP17 (I/O) = output = LED alert on front, active low
+            irq 0xF6 = 0xFF		# read/write GP1x lines (0xCA)
+
+            irq 0xEF = 0x00		# GP_INT2 disable
+            irq 0xF0 = 0x00		# GP_INT1 disable
+            irq 0xF1 = 0x00		# WDT_UNITS
+            irq 0xF2 = 0x00		# WDT_VAL
+            irq 0xF3 = 0x00		# WDT_CFG
+            irq 0xF4 = 0x20		# WDT_CTRL (stop-cnt)
+          end
+          device pnp 3f0.a off 		# ACPI (No support yet)
+            # irq 0x60 = 0x0C
+            # irq 0x61 = 0x80
+          end
         end
       end
       device pci 7.1 on end		# IDE