summaryrefslogtreecommitdiff
path: root/src/mainboard/msi
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/msi')
-rw-r--r--src/mainboard/msi/ms7721/BiosCallOuts.c38
-rw-r--r--src/mainboard/msi/ms7721/Kconfig8
-rw-r--r--src/mainboard/msi/ms7721/OemCustomize.c27
-rw-r--r--src/mainboard/msi/ms7721/buildOpts.c4
-rw-r--r--src/mainboard/msi/ms7721/devicetree.cb146
-rw-r--r--src/mainboard/msi/ms7721/dsdt.asl30
-rw-r--r--src/mainboard/msi/ms7721/romstage.c83
7 files changed, 216 insertions, 120 deletions
diff --git a/src/mainboard/msi/ms7721/BiosCallOuts.c b/src/mainboard/msi/ms7721/BiosCallOuts.c
index 98bb06781e..09df39baa7 100644
--- a/src/mainboard/msi/ms7721/BiosCallOuts.c
+++ b/src/mainboard/msi/ms7721/BiosCallOuts.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2016 Renze Nicolai <renze@rnplus.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,32 +38,31 @@ const BIOS_CALLOUT_STRUCT BiosCallouts[] =
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/**
- * ASUS F2A85-M board ALC887-VD Verb Table
+ * MSI MS-7721 board ALC887-VD Verb Table
*
- * Copied from `/sys/class/sound/hwC1D0/init_pin_configs` when running
+ * Copied from `/sys/class/sound/hwC1D3/init_pin_configs` when running
* the vendor BIOS.
*/
-const CODEC_ENTRY f2a85_m_alc887_VerbTbl[] = {
- {0x11, 0x99430140},
- {0x12, 0x411111f0},
- {0x14, 0x01014010},
- {0x15, 0x01011012},
- {0x16, 0x01016011},
- {0x17, 0x01012014},
- {0x18, 0x01a19850},
- {0x19, 0x02a19c60},
- {0x1a, 0x0181305f},
- {0x1b, 0x02214c20},
- {0x1c, 0x411111f0},
- {0x1d, 0x4005e601},
- {0x1e, 0x01456130},
- {0x1f, 0x411111f0},
- {0xff, 0xffffffff}
+const CODEC_ENTRY ms7721_alc887_VerbTbl[] = {
+{0x11, 0x411111f0},
+{0x12, 0x411111f0},
+{0x14, 0x01014410},
+{0x15, 0x01011412},
+{0x16, 0x01016411},
+{0x17, 0x01012414},
+{0x18, 0x01a19c30},
+{0x19, 0x02a19c40},
+{0x1a, 0x0181343f},
+{0x1b, 0x02214c20},
+{0x1c, 0x411111f0},
+{0x1d, 0x4007f603},
+{0x1e, 0x411111f0},
+{0x1f, 0x411111f0}
};
static const CODEC_TBL_LIST CodecTableList[] =
{
- {0x10ec0887, (CODEC_ENTRY*)&f2a85_m_alc887_VerbTbl[0]},
+ {0x10ec0887, (CODEC_ENTRY*)&ms7721_alc887_VerbTbl[0]},
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
};
diff --git a/src/mainboard/msi/ms7721/Kconfig b/src/mainboard/msi/ms7721/Kconfig
index d520bd493c..7a2623b80b 100644
--- a/src/mainboard/msi/ms7721/Kconfig
+++ b/src/mainboard/msi/ms7721/Kconfig
@@ -3,6 +3,8 @@
#
# Copyright (C) 2012 Advanced Micro Devices, Inc.
# Copyright (C) 2012 Rudolf Marek <r.marek@assembler.cz>
+# Copyright (C) 2016 Renze Nicolai <renze@rnplus.nl>
+
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -25,7 +27,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE
select HAVE_ACPI_TABLES
- select SUPERIO_ITE_IT8728F
+ select SUPERIO_FINTEK_F71869AD
select BOARD_ROMSIZE_KB_8192
select GFXUMA
select HUDSON_DISABLE_IMC
@@ -68,11 +70,11 @@ config ONBOARD_VGA_IS_PRIMARY
config VGA_BIOS_ID
string
- default "1002,9993"
+ default "1002,990e"
config HUDSON_LEGACY_FREE
bool
- default y
+ default n
config POST_IO
bool
diff --git a/src/mainboard/msi/ms7721/OemCustomize.c b/src/mainboard/msi/ms7721/OemCustomize.c
index a6c9833d72..90bc5a9c13 100644
--- a/src/mainboard/msi/ms7721/OemCustomize.c
+++ b/src/mainboard/msi/ms7721/OemCustomize.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2016 Renze Nicolai <renze@rnplus.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -69,18 +70,30 @@
*/
static const PCIe_PORT_DESCRIPTOR PortList [] = {
- /* PCIe port, Lanes 8:23, PCI Device Number 2, blue x16 slot */
+ /* PCIe port, Lanes 8:23, PCI Device Number 2, x16 slot */
{
0,
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 23),
PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
},
- /* PCIe port, Lanes 4:7, PCI Device Number 4, black x16 slot (in fact x4) */
+ /* PCIe port, Lane 4, PCI Device Number 4, Realtek LAN */
{
0,
- PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
},
+ /* PCIe port, Lane 5, PCI Device Number 5, x1 slot (1) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 5, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
+ /* PCIe port, Lane 6, PCI Device Number 6, x1 slot (2) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
+ PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 6, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 1)
+ },
/* PCIe port, Lanes 0:3, UMI link to SB, PCI Device Number 8 */
{
DESCRIPTOR_TERMINATE_LIST,
@@ -89,12 +102,6 @@ static const PCIe_PORT_DESCRIPTOR PortList [] = {
},
};
-/*
- * It is not known, if the setup is complete.
- *
- * Tested and works: VGA/DVI
- * Untested: HDMI
- */
static const PCIe_DDI_DESCRIPTOR DdiList [] = {
// DP0 to HDMI0/DP
{
@@ -205,7 +212,6 @@ static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid)
*----------------------------------------------------------------------------------------
*/
-#if IS_ENABLED(CONFIG_BOARD_MSI_MS7721)
/*
* Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
* (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
@@ -225,7 +231,6 @@ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
*/
PSO_END
};
-#endif /* CONFIG_BOARD_MSI_MS7721 */
const struct OEM_HOOK OemCustomize = {
.InitEarly = OemInitEarly,
diff --git a/src/mainboard/msi/ms7721/buildOpts.c b/src/mainboard/msi/ms7721/buildOpts.c
index e0a1ea4d3a..ecb168c638 100644
--- a/src/mainboard/msi/ms7721/buildOpts.c
+++ b/src/mainboard/msi/ms7721/buildOpts.c
@@ -326,11 +326,11 @@ CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] =
#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
//#define BLDCFG_IR_PIN_CONTROL 0x33
//#define FCH_NO_XHCI_SUPPORT FALSE
-GPIO_CONTROL f2a85_m_gpio[] = {
+GPIO_CONTROL ms7721_m_gpio[] = {
// {183, Function1, PullUpB},
{-1}
};
-#define BLDCFG_FCH_GPIO_CONTROL_LIST (&f2a85_m_gpio[0])
+#define BLDCFG_FCH_GPIO_CONTROL_LIST (&ms7721_m_gpio[0])
// The following definitions specify the default values for various parameters in which there are
// no clearly defined defaults to be used in the common file. The values below are based on product
diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb
index 6b728d5ba0..ced99f89e9 100644
--- a/src/mainboard/msi/ms7721/devicetree.cb
+++ b/src/mainboard/msi/ms7721/devicetree.cb
@@ -2,6 +2,7 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2016 Renze Nicolai <renze@rnplus.nl>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -27,25 +28,25 @@ chip northbridge/amd/agesa/family15tn/root_complex
chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
device pci 0.0 on end # Root Complex
device pci 0.2 on end # IOMMU
- device pci 1.0 on end # Internal Graphics P2P bridge 0x99XX
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x990e
device pci 1.1 on end # Internal Multimedia
- device pci 2.0 on end # PCIE SLOT0 x16 blue
- device pci 3.0 off end # unused?
- device pci 4.0 on end # PCIE 4x black
- device pci 5.0 off end # unused?
- device pci 6.0 off end # unused?
+ device pci 2.0 on end # PCIe x16
+ device pci 3.0 off end # -
+ device pci 4.0 on end # PCIE Realtek LAN
+ device pci 5.0 on end # PCIE x1 (1)
+ device pci 6.0 on end # PCIE x1 (2)
device pci 7.0 off end # LAN
device pci 8.0 off end # NB/SB Link P2P bridge
end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
- device pci 10.0 on end # XHCI HC0
- device pci 10.1 on end # XHCI HC1
+ device pci 10.0 on end # USB XHCI
+ device pci 10.1 on end # USB XHCI
device pci 11.0 on end # SATA
- device pci 12.0 on end # USB
- device pci 12.2 on end # USB
- device pci 13.0 on end # USB
- device pci 13.2 on end # USB
+ device pci 12.0 on end # USB OHCI
+ device pci 12.2 on end # USB EHCI
+ device pci 13.0 on end # USB OHCI
+ device pci 13.2 on end # USB EHCI
device pci 14.0 on # SMBUS
chip drivers/generic/generic #dimm 0
device i2c 50 on end # 7-bit SPD address
@@ -55,61 +56,102 @@ chip northbridge/amd/agesa/family15tn/root_complex
end
end # SM
device pci 14.1 off end # IDE 0x439c
- device pci 14.2 on end # HDA 0x4383
+ device pci 14.2 on end # Azalia (Audio)
device pci 14.3 on # LPC 0x439d
- chip superio/ite/it8728f
- register hwm_ctl_register = "0xc0"
- register hwm_main_ctl_register = "0x33"
- register hwm_adc_temp_chan_en_reg = "0x38"
- register hwm_fan1_ctl_pwm = "0x00"
- register hwm_fan2_ctl_pwm = "0x00"
- register hwm_fan3_ctl_pwm = "0x00"
-
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 on # Com1
+ chip superio/fintek/f71869ad
+ register "multi_function_register_1" = "0x01"
+ register "multi_function_register_2" = "0x0f"
+ register "multi_function_register_3" = "0x2f"
+ register "multi_function_register_4" = "0x04"
+ register "multi_function_register_5" = "0x3e"
+
+ # HWM configuration registers
+ register "hwm_smbus_address" = "0x98"
+ register "hwm_smbus_control_reg" = "0x02"
+ register "hwm_fan_type_sel_reg" = "0x00"
+ register "hwm_fan1_temp_adj_rate_reg" = "0x33"
+ register "hwm_fan_mode_sel_reg" = "0x07"
+ register "hwm_fan1_idx_rpm_mode" = "0x0e"
+ register "hwm_fan1_seg1_speed_count" = "0xff"
+ register "hwm_fan1_seg2_speed_count" = "0x0e"
+ register "hwm_fan1_seg3_speed_count" = "0x07"
+ register "hwm_fan1_temp_map_sel" = "0x8c"
+ device pnp 4e.00 off end
+ device pnp 4e.01 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
- device pnp 2e.2 off # Com2
+ device pnp 4e.02 off # COM2 (Level converter not populated, but may be usable?)
io 0x60 = 0x2f8
irq 0x70 = 3
end
- device pnp 2e.3 off # Parallel Port
+ device pnp 4e.03 on # Parallel Port
io 0x60 = 0x378
- irq 0x70 = 7
+ irq 0x70 = 5
+ drq 0x74 = 3
+ irq 0xf0 = 0x44 # PRT Mode Select Register
end
- device pnp 2e.4 on # Env Controller
- io 0x60 = 0x290
- io 0x62 = 0x220
+ device pnp 4e.04 on # Hardware Monitor
+ io 0x60 = 0x600
irq 0x70 = 0
end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.6 off # Mouse
- irq 0x70 = 12
+ device pnp 4e.05 on # KBC
+ io 0x60 = 0x060
+ irq 0x70 = 1 # Keyboard IRQ
+ irq 0x72 = 12 # Mouse IRQ
end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0x228 #SMI
- io 0x62 = 0x300 #Simple I/O
- io 0x64 = 0x238 #Phony resource IT8603E does not have it
- irq 0x70 = 0
- end
- device pnp 2e.a off end # CIR
- end #superio/ite/it8728f
+ device pnp 4e.06 on # GPIO
+ # ! GPIO config is disabled because the code in romstage.c
+ # ! has already taken care of it
+ #io 0x60 = 0xa00
+ #irq 0xe0 = 0x04 # GPIO1 output
+ #irq 0xe1 = 0xff # GPIO1 output data
+ #irq 0xe3 = 0x04 # GPIO1 drive enable
+ #irq 0xe4 = 0x00 # GPIO1 PME enable
+ #irq 0xe5 = 0x00 # GPIO1 input detect select
+ #irq 0xe6 = 0x40 # GPIO1 event status
+
+ #irq 0xd0 = 0x00 # GPIO2 output
+ #irq 0xd1 = 0xff # GPIO2 output data
+ #irq 0xd3 = 0x00 # GPIO2 drive enable
+
+ #irq 0xc0 = 0x00 # GPIO3 output
+ #irq 0xc1 = 0xff # GPIO3 output data
+
+ #irq 0xb0 = 0x04 # GPIO4 output
+ #irq 0xb1 = 0x04 # GPIO4 output data
+ #irq 0xb3 = 0x04 # GPIO4 drive enable
+ #irq 0xb4 = 0x00 # GPIO4 PME enable
+ #irq 0xb5 = 0x00 # GPIO4 input detect select
+ #irq 0xb6 = 0x00 # GPIO4 event status
+
+ #irq 0xa0 = 0x00 # GPIO5 output
+ #irq 0xa1 = 0x1f # GPIO5 output data
+ #irq 0xa3 = 0x00 # GPIO5 drive enable
+ #irq 0xa4 = 0x00 # GPIO5 PME enable
+ #irq 0xa5 = 0xff # GPIO5 input detect select
+ #irq 0xa6 = 0xe0 # GPIO5 event status
+
+ #irq 0x90 = 0x00 # GPIO6 output
+ #irq 0x91 = 0xff # GPIO6 output data
+ #irq 0x93 = 0x00 # GPIO6 drive enable
+
+ #irq 0x80 = 0x00 # GPIO7 output
+ #irq 0x81 = 0xff # GPIO7 output data
+ #irq 0x83 = 0x00 # GPIO7 drive enable
+ end
+
+ device pnp 4e.07 on end # WDT
+ device pnp 4e.08 off end # CIR
+ device pnp 4e.0a on end # PME
+ end # f71869ad
end #device pci 14.3 # LPC
- device pci 14.4 on end # PCI 0x4384
- device pci 14.5 on end # USB 2
+ device pci 14.4 on end # PCI 0x4384 (PCI slot on board)
+ device pci 14.5 on end # USB OHCI
device pci 14.6 off end # Gec
device pci 14.7 off end # SD
- device pci 15.0 on end # PCIe 0 - onboard PCIe 1x
- device pci 15.1 on end # PCIe 1 onboard gigabit
+ device pci 15.0 off end # unused
+ device pci 15.1 off end # unused
device pci 15.2 off end # unused
device pci 15.3 off end # unused
diff --git a/src/mainboard/msi/ms7721/dsdt.asl b/src/mainboard/msi/ms7721/dsdt.asl
index 0028855c94..f1840f64b6 100644
--- a/src/mainboard/msi/ms7721/dsdt.asl
+++ b/src/mainboard/msi/ms7721/dsdt.asl
@@ -3,6 +3,7 @@
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Copyright (C) 2013 Sage Electronic Engineering, LLC
+ * Copyright (C) 2016 Renze Nicolai <renze@rnplus.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -19,12 +20,12 @@ DefinitionBlock (
"DSDT.AML", /* Output filename */
"DSDT", /* Signature */
0x02, /* DSDT Revision, needs to be 2 for 64bit */
- "ASUS ", /* OEMID */
+ "MSI ", /* OEMID */
"COREBOOT", /* TABLE ID */
0x00010001 /* OEM Revision */
)
{ /* Start of ASL file */
- /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+ #include <arch/x86/acpi/debug.asl> /* Include global debug methods if needed */
/* Globals for the platform */
#include "acpi/mainboard.asl"
@@ -61,33 +62,14 @@ DefinitionBlock (
/* Describe the AMD Fusion Controller Hub Southbridge */
#include <southbridge/amd/agesa/hudson/acpi/fch.asl>
-
- /**
- * TODO: The devices listed here (SBR0 and SBR1) do not appear to
- * be referenced anywhere and could possibly be removed.
- */
- Device(SBR0) { /* PCIe 1x SB */
- Name(_ADR, 0x00150000)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT,0) {
- If(PMOD){ Return(ABR0) } /* APIC mode */
- Return (PBR0) /* PIC mode */
- }
- }
-
- Device(SBR1) { /* Onboard network */
- Name(_ADR, 0x00150001)
- Name(_PRW, Package() {0x18, 4})
- Method(_PRT, 0) {
- If(PMOD){ Return(ABR1) } /* APIC mode */
- Return (PBR1) /* PIC mode */
- }
- }
}
/* Describe PCI INT[A-H] for the Southbridge */
#include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
+ /* Describe USB for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/usb.asl>
+
} /* End Scope(_SB) */
/* Describe SMBUS for the Southbridge */
diff --git a/src/mainboard/msi/ms7721/romstage.c b/src/mainboard/msi/ms7721/romstage.c
index 0c30439d0f..599187d4c0 100644
--- a/src/mainboard/msi/ms7721/romstage.c
+++ b/src/mainboard/msi/ms7721/romstage.c
@@ -3,6 +3,7 @@
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Copyright (C) 2012 Rudolf Marek <r.marek@assembler.cz>
+ * Copyright (C) 2016 Renze Nicolai <renze@rnplus.nl>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -31,18 +32,81 @@
#include <device/pnp_def.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <southbridge/amd/agesa/hudson/smbus.h>
+
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f71869ad/f71869ad.h>
+
#include <stdint.h>
#include <string.h>
-#include <superio/ite/common/ite.h>
-#include <superio/ite/it8728f/it8728f.h>
#define MMIO_NON_POSTED_START 0xfed00000
#define MMIO_NON_POSTED_END 0xfedfffff
#define SB_MMIO 0xFED80000
#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x))
-#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1)
-#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO)
+/* Ensure Super I/O config address (i.e., 0x2e or 0x4e) matches that of devicetree.cb */
+#define SUPERIO_ADDRESS 0x4e
+
+#define SERIAL_DEV PNP_DEV(SUPERIO_ADDRESS, F71869AD_SP1)
+#define GPIO_DEV PNP_DEV(SUPERIO_ADDRESS, F71869AD_GPIO)
+
+
+/* GPIO configuration */
+#define FINTEK_ENTRY_KEY 0x87
+static void pnp_enter_conf_state(pnp_devfn_t dev)
+{
+ u16 port = dev >> 8;
+ outb(FINTEK_ENTRY_KEY, port);
+ outb(FINTEK_ENTRY_KEY, port);
+}
+
+#define FINTEK_EXIT_KEY 0xAA
+static void pnp_exit_conf_state(pnp_devfn_t dev)
+{
+ u16 port = dev >> 8;
+ outb(FINTEK_EXIT_KEY, port);
+}
+
+static void gpio_init(pnp_devfn_t dev)
+{
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 0);
+ pnp_write_config(dev, 0x60, 0x0a); //Base addr high
+ pnp_write_config(dev, 0x61, 0x00); //Base addr low
+ pnp_write_config(dev, 0xe0, 0x04); //GPIO1 output enable
+ pnp_write_config(dev, 0xe1, 0xff); //GPIO1 output data
+ pnp_write_config(dev, 0xe3, 0x04); //GPIO1 drive enable
+ pnp_write_config(dev, 0xe4, 0x00); //GPIO1 PME enable
+ pnp_write_config(dev, 0xe5, 0x00); //GPIO1 input detect select
+ pnp_write_config(dev, 0xe6, 0x40); //GPIO1 event status
+ pnp_write_config(dev, 0xd0, 0x00); //GPIO2 output enable
+ pnp_write_config(dev, 0xd1, 0xff); //GPIO2 output data
+ pnp_write_config(dev, 0xd3, 0x00); //GPIO2 drive enable
+ pnp_write_config(dev, 0xc0, 0x00); //GPIO3 output enable
+ pnp_write_config(dev, 0xc1, 0xff); //GPIO3 output data
+ pnp_write_config(dev, 0xb0, 0x04); //GPIO4 output enable
+ pnp_write_config(dev, 0xb1, 0x04); //GPIO4 output data
+ pnp_write_config(dev, 0xb3, 0x04); //GPIO4 drive enable
+ pnp_write_config(dev, 0xb4, 0x00); //GPIO4 PME enable
+ pnp_write_config(dev, 0xb5, 0x00); //GPIO4 input detect select
+ pnp_write_config(dev, 0xb6, 0x00); //GPIO4 event status
+ pnp_write_config(dev, 0xa0, 0x00); //GPIO5 output enable
+ pnp_write_config(dev, 0xa1, 0x1f); //GPIO5 output data
+ pnp_write_config(dev, 0xa3, 0x00); //GPIO5 drive enable
+ pnp_write_config(dev, 0xa4, 0x00); //GPIO5 PME enable
+ pnp_write_config(dev, 0xa5, 0xff); //GPIO5 input detect select
+ pnp_write_config(dev, 0xa6, 0xe0); //GPIO5 event status
+ pnp_write_config(dev, 0x90, 0x00); //GPIO6 output enable
+ pnp_write_config(dev, 0x91, 0xff); //GPIO6 output data
+ pnp_write_config(dev, 0x93, 0x00); //GPIO6 drive enable
+ pnp_write_config(dev, 0x80, 0x00); //GPIO7 output enable
+ pnp_write_config(dev, 0x81, 0xff); //GPIO7 output data
+ pnp_write_config(dev, 0x83, 0x00); //GPIO7 drive enable
+ pnp_set_enable(dev, 1);
+ pnp_exit_conf_state(dev);
+}
+
static void sbxxx_enable_48mhzout(void)
{
@@ -94,9 +158,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* enable SIO clock */
sbxxx_enable_48mhzout();
- ite_kill_watchdog(GPIO_DEV);
- ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- ite_enable_3vsbsw(GPIO_DEV);
+
+ /* Initialize GPIO registers */
+ gpio_init(GPIO_DEV);
+
+ /* Enable serial console */
+ fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
/* turn on secondary smbus at b20 */
@@ -129,12 +196,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
disable_cache_as_ram();
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
-
post_code(0x60);
agesawrapper_amdinitresume();
amd_initcpuio();
agesawrapper_amds3laterestore();
-
post_code(0x61);
prepare_for_resume();
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 09:05:24 +0000