diff options
Diffstat (limited to 'src/mainboard/msi')
| -rw-r--r-- | src/mainboard/msi/ms7721/buildOpts.c | 268 |
1 files changed, 36 insertions, 232 deletions
diff --git a/src/mainboard/msi/ms7721/buildOpts.c b/src/mainboard/msi/ms7721/buildOpts.c index 61858940c0..5740382985 100644 --- a/src/mainboard/msi/ms7721/buildOpts.c +++ b/src/mainboard/msi/ms7721/buildOpts.c @@ -1,16 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/** - * @file - * - * AMD User options selection for a Brazos platform solution system - * - * This file is placed in the user's platform directory and contains the - * build option selections desired for that platform. - * - * For Information about this file, see @ref platforminstall. - */ - #include <vendorcode/amd/agesa/f15tn/AGESA.h> /* Include the files that instantiate the configuration definitions. */ @@ -18,245 +7,60 @@ #include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> #include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> #include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> -/* the next two headers depend on heapManager.h */ +/* AGESA nonsense: the next two headers depend on heapManager.h */ #include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> #include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> /* These tables are optional and may be used to adjust memory timing settings */ #include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> #include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> -/* Select the CPU family. */ -#define INSTALL_FAMILY_10_SUPPORT FALSE -#define INSTALL_FAMILY_12_SUPPORT FALSE -#define INSTALL_FAMILY_14_SUPPORT FALSE -#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE - -/* Select the CPU socket type. */ -#define INSTALL_G34_SOCKET_SUPPORT FALSE -#define INSTALL_C32_SOCKET_SUPPORT FALSE -#define INSTALL_S1G3_SOCKET_SUPPORT FALSE -#define INSTALL_S1G4_SOCKET_SUPPORT FALSE -#define INSTALL_ASB2_SOCKET_SUPPORT FALSE -#define INSTALL_FS1_SOCKET_SUPPORT FALSE -#define INSTALL_FM1_SOCKET_SUPPORT FALSE -#define INSTALL_FP2_SOCKET_SUPPORT FALSE -#define INSTALL_FT1_SOCKET_SUPPORT FALSE -#define INSTALL_AM3_SOCKET_SUPPORT FALSE +/* Select the CPU family */ +#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE -#define INSTALL_FM2_SOCKET_SUPPORT TRUE +/* Select the CPU socket type */ +#define INSTALL_FM2_SOCKET_SUPPORT TRUE -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE -//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE -#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE -#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE -#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE -//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE -#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE -//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE -#define BLDOPT_REMOVE_SRAT FALSE //TRUE -#define BLDOPT_REMOVE_SLIT FALSE //TRUE -#define BLDOPT_REMOVE_WHEA FALSE //TRUE +//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE +#define BLDOPT_REMOVE_ECC_SUPPORT TRUE +#define BLDOPT_REMOVE_SRAT FALSE +#define BLDOPT_REMOVE_WHEA FALSE #define BLDOPT_REMOVE_CRAT TRUE -#define BLDOPT_REMOVE_DMI TRUE -//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE -//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE - -//This element selects whether P-States should be forced to be independent, -// as reported by the ACPI _PSD object. For single-link processors, -// setting TRUE for OS to support this feature. - -//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE - -/* Build configuration values here. - */ -#define BLDCFG_VRM_CURRENT_LIMIT 90000 -#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 -#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 -#define BLDCFG_PLAT_NUM_IO_APICS 3 -#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST -#define BLDCFG_MEM_INIT_PSTATE 0 - -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE - -#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY -#define BLDCFG_MEMORY_MODE_UNGANGED TRUE -#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE -#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED -#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE -#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE -#define BLDCFG_MEMORY_POWER_DOWN TRUE -#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT -#define BLDCFG_ONLINE_SPARE FALSE -#define BLDCFG_BANK_SWIZZLE TRUE -#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO -#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY -#define BLDCFG_DQS_TRAINING_CONTROL TRUE -#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE -#define BLDCFG_USE_BURST_MODE FALSE -#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE -#define BLDCFG_ENABLE_ECC_FEATURE FALSE -#define BLDCFG_ECC_REDIRECTION FALSE -#define BLDCFG_SCRUB_DRAM_RATE 0 -#define BLDCFG_SCRUB_L2_RATE 0 -#define BLDCFG_SCRUB_L3_RATE 0 -#define BLDCFG_SCRUB_IC_RATE 0 -#define BLDCFG_SCRUB_DC_RATE 0 -#define BLDCFG_ECC_SYMBOL_SIZE 4 -#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 -#define BLDCFG_ECC_SYNC_FLOOD FALSE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -#define BLDCFG_1GB_ALIGN FALSE -#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE -#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% -#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 - -#define BLDOPT_REMOVE_ALIB FALSE -#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled -#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' -#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' -#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 - -#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 -#define BLDCFG_CFG_ABM_SUPPORT 0 -//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 +/* Build configuration values here */ +#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE -// Specify the default values for the VRM controlling the VDDNB plane. -// If not specified, the values used for the core VRM will be applied -//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity -//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L -//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime -//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity -//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity -//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity +#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE +#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE +#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE +#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY +#define BLDCFG_ENABLE_ECC_FEATURE FALSE +#define BLDCFG_ECC_SYNC_FLOOD FALSE -#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 - -#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 -#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 - -#if CONFIG(GFXUMA) -#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED -//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M */ -#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M -#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE -#endif +#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000 /* (0x2000 << 16) = 512M */ -#define BLDCFG_IOMMU_SUPPORT TRUE +#define BLDCFG_IOMMU_SUPPORT TRUE -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID -//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID -//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID +#define BLDCFG_CFG_GNB_HD_AUDIO TRUE -/* Process the options... - * This file include MUST occur AFTER the user option selection settings - */ -/* - * Customized OEM build configurations for FCH component - */ -// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 -// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 -// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 -// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 -// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 -// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 -// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 -// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 -// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 -// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 -// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 -// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 -// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 -// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 -// #define BLDCFG_AZALIA_SSID 0x780D1022 -// #define BLDCFG_SMBUS_SSID 0x780B1022 -// #define BLDCFG_IDE_SSID 0x780C1022 -// #define BLDCFG_SATA_AHCI_SSID 0x78011022 -// #define BLDCFG_SATA_IDE_SSID 0x78001022 -// #define BLDCFG_SATA_RAID5_SSID 0x78031022 -// #define BLDCFG_SATA_RAID_SSID 0x78021022 -// #define BLDCFG_EHCI_SSID 0x78081022 -// #define BLDCFG_OHCI_SSID 0x78071022 -// #define BLDCFG_LPC_SSID 0x780E1022 -// #define BLDCFG_SD_SSID 0x78061022 -// #define BLDCFG_XHCI_SSID 0x78121022 -// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE -// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 -// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE -// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE -// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE +/* Customized OEM build configurations for FCH component */ +#define BLDCFG_FCH_GPP_LINK_CONFIG PortA1B1C1D1 +#define BLDCFG_FCH_GPP_PORT0_PRESENT TRUE +#define BLDCFG_FCH_GPP_PORT1_PRESENT TRUE -/* - * Agesa optional capabilities selection. - * Uncomment and mark FALSE those features you wish to include in the build. - * Comment out or mark TRUE those features you want to REMOVE from the build. - */ - -#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 -#define DFLT_SMBUS1_BASE_ADDRESS 0xB20 -/* The AGESA likes to enable 512 bytes region on this base for LPC bus */ -#define DFLT_SIO_PME_BASE_ADDRESS 0xE00 -#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 -#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 -#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 -#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 -#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 -#define DFLT_SPI_BASE_ADDRESS 0xFEC10000 -#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 -#define DFLT_HPET_BASE_ADDRESS 0xFED00000 -#define DFLT_SMI_CMD_PORT 0xB0 -#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 -#define DFLT_GEC_BASE_ADDRESS 0xFED61000 -#define DFLT_AZALIA_SSID 0x780D1022 -#define DFLT_SMBUS_SSID 0x780B1022 -#define DFLT_IDE_SSID 0x780C1022 -#define DFLT_SATA_AHCI_SSID 0x78011022 -#define DFLT_SATA_IDE_SSID 0x78001022 -#define DFLT_SATA_RAID5_SSID 0x78031022 -#define DFLT_SATA_RAID_SSID 0x78021022 -#define DFLT_EHCI_SSID 0x78081022 -#define DFLT_OHCI_SSID 0x78071022 -#define DFLT_LPC_SSID 0x780E1022 -#define DFLT_SD_SSID 0x78061022 -#define DFLT_XHCI_SSID 0x78121022 -#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE -#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE -#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1 -#define DFLT_FCH_GPP_PORT0_PRESENT TRUE -#define DFLT_FCH_GPP_PORT1_PRESENT TRUE -#define DFLT_FCH_GPP_PORT2_PRESENT FALSE -#define DFLT_FCH_GPP_PORT3_PRESENT FALSE -#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE -#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE -//#define FCH_NO_XHCI_SUPPORT FALSE -GPIO_CONTROL ms7721_m_gpio[] = { -// {183, Function1, PullUpB}, +GPIO_CONTROL ms7721_m_gpio[] = { {-1} }; -#define BLDCFG_FCH_GPIO_CONTROL_LIST (&ms7721_m_gpio[0]) -/* Moving this include up will break AGESA. */ +#define BLDCFG_FCH_GPIO_CONTROL_LIST (ms7721_m_gpio) + +/* + * Process the options... + * This file include MUST occur AFTER the user option selection settings. + * AGESA nonsense: Moving this include up will break AGESA. + */ #include <PlatformInstall.h> |