diff options
Diffstat (limited to 'src/mainboard/lippert/spacerunner-lx')
| -rw-r--r-- | src/mainboard/lippert/spacerunner-lx/devicetree.cb | 2 | ||||
| -rw-r--r-- | src/mainboard/lippert/spacerunner-lx/mainboard.c | 2 | ||||
| -rw-r--r-- | src/mainboard/lippert/spacerunner-lx/romstage.c | 6 |
3 files changed, 5 insertions, 5 deletions
diff --git a/src/mainboard/lippert/spacerunner-lx/devicetree.cb b/src/mainboard/lippert/spacerunner-lx/devicetree.cb index 8619e84b6a..5f5b15bbb6 100644 --- a/src/mainboard/lippert/spacerunner-lx/devicetree.cb +++ b/src/mainboard/lippert/spacerunner-lx/devicetree.cb @@ -21,7 +21,7 @@ chip northbridge/amd/lx register "com2_enable" = "0" register "com2_address" = "0x2E8" register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1<<31 + Device 0x0F<<11 + Function 3<<8 + register "unwanted_vpci[0]" = "0x80007B00" # Audio: 1 << 31 + Device 0x0F << 11 + Function 3 << 8 register "unwanted_vpci[1]" = "0" # End of list has a zero device pci 8.0 on end # Slot4 device pci 9.0 on end # Slot3 diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c index 4decd0e95e..b0bc74e9f6 100644 --- a/src/mainboard/lippert/spacerunner-lx/mainboard.c +++ b/src/mainboard/lippert/spacerunner-lx/mainboard.c @@ -31,7 +31,7 @@ #define SIO_GP1X_CONFIG 0x01 #endif -static const u16 ec_init_table[] = { /* hi=data, lo=index */ +static const u16 ec_init_table[] = { /* hi = data, lo = index */ 0x1900, /* Enable monitoring */ 0x3050, /* VIN4,5 enabled */ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c index b3a13ad4b2..85503c547d 100644 --- a/src/mainboard/lippert/spacerunner-lx/romstage.c +++ b/src/mainboard/lippert/spacerunner-lx/romstage.c @@ -116,7 +116,7 @@ static int smc_send_config(unsigned char config_data) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal 0x1423, // don't delay PoWeROK1/2 0x9072, // watchdog triggers PWROK, counts seconds @@ -124,12 +124,12 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) + 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) 0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED 0x07C8, // config GP12-10 as output 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) + 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) }; /* Early mainboard specific GPIO setup. */ |