diff options
Diffstat (limited to 'src/mainboard/lippert/spacerunner-lx/Options.lb')
| -rw-r--r-- | src/mainboard/lippert/spacerunner-lx/Options.lb | 156 |
1 files changed, 78 insertions, 78 deletions
diff --git a/src/mainboard/lippert/spacerunner-lx/Options.lb b/src/mainboard/lippert/spacerunner-lx/Options.lb index 5d8dd0981a..805148b7f2 100644 --- a/src/mainboard/lippert/spacerunner-lx/Options.lb +++ b/src/mainboard/lippert/spacerunner-lx/Options.lb @@ -20,69 +20,69 @@ ## Based on Options.lb from AMD's DB800 mainboard. -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HAVE_OPTION_TABLE -uses USE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_HAVE_OPTION_TABLE +uses CONFIG_USE_OPTION_TABLE uses CONFIG_ROM_PAYLOAD uses CONFIG_IDE uses CONFIG_FS_PAYLOAD uses CONFIG_FS_EXT2 -uses AUTOBOOT_DELAY -uses AUTOBOOT_CMDLINE -uses IRQ_SLOT_COUNT -uses MAINBOARD -uses MAINBOARD_VENDOR -uses MAINBOARD_PART_NUMBER +uses CONFIG_AUTOBOOT_DELAY +uses CONFIG_AUTOBOOT_CMDLINE +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_MAINBOARD +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD_PART_NUMBER uses COREBOOT_EXTRA_VERSION -uses ARCH -uses FALLBACK_SIZE -uses STACK_SIZE -uses HEAP_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_ARCH +uses CONFIG_FALLBACK_SIZE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESS uses CONFIG_COMPRESSED_PAYLOAD_NRV2B uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses _RAMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses HAVE_MP_TABLE -uses CROSS_COMPILE +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_RAMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_HAVE_MP_TABLE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY -uses DEBUG -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY +uses CONFIG_DEBUG +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL uses CONFIG_CONSOLE_SERIAL8250 -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS uses CONFIG_UDELAY_TSC uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses CONFIG_VIDEO_MB -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_PRINTK_IN_CAR -uses PIRQ_ROUTE +uses CONFIG_PIRQ_ROUTE -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 512*1024 +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. +default CONFIG_ROM_SIZE = 512*1024 ### ### Build options @@ -94,17 +94,17 @@ default CONFIG_PCI_ROM_RUN = 0 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT = 1 +default CONFIG_HAVE_FALLBACK_BOOT = 1 ## ## no MP table ## -default HAVE_MP_TABLE = 0 +default CONFIG_HAVE_MP_TABLE = 0 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET = 0 +default CONFIG_HAVE_HARD_RESET = 0 ## Delay timer options ## @@ -114,57 +114,57 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE = 1 -default IRQ_SLOT_COUNT = 7 -default PIRQ_ROUTE = 1 +default CONFIG_HAVE_PIRQ_TABLE = 1 +default CONFIG_IRQ_SLOT_COUNT = 7 +default CONFIG_PIRQ_ROUTE = 1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE = 0 +default CONFIG_HAVE_OPTION_TABLE = 0 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 64 * 1024 -default FALLBACK_SIZE = 128 * 1024 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 +default CONFIG_FALLBACK_SIZE = 128 * 1024 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM = 1 -default DCACHE_RAM_BASE = 0xc8000 -default DCACHE_RAM_SIZE = 0x08000 +default CONFIG_USE_DCACHE_RAM = 1 +default CONFIG_DCACHE_RAM_BASE = 0xc8000 +default CONFIG_DCACHE_RAM_SIZE = 0x08000 default CONFIG_USE_PRINTK_IN_CAR=1 ## ## Use a small 8K stack ## -default STACK_SIZE = 0x2000 +default CONFIG_STACK_SIZE = 0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE = 0x4000 +default CONFIG_HEAP_SIZE = 0x4000 ## ## Only use the option table in a normal image ## -#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE -default USE_OPTION_TABLE = 0 +#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = 0 -default _RAMBASE = 0x00004000 +default CONFIG_RAMBASE = 0x00004000 default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CROSS_COMPILE = "" -default CC = "$(CROSS_COMPILE)gcc -m32" -default HOSTCC = "gcc" +default CONFIG_CROSS_COMPILE = "" +default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC = "gcc" ## ## The Serial Console @@ -174,24 +174,24 @@ default HOSTCC = "gcc" default CONFIG_CONSOLE_SERIAL8250 = 1 ## Select the serial console baud rate -default TTYS0_BAUD = 115200 -#default TTYS0_BAUD = 57600 -#default TTYS0_BAUD = 38400 -#default TTYS0_BAUD = 19200 -#default TTYS0_BAUD = 9600 -#default TTYS0_BAUD = 4800 -#default TTYS0_BAUD = 2400 -#default TTYS0_BAUD = 1200 +default CONFIG_TTYS0_BAUD = 115200 +#default CONFIG_TTYS0_BAUD = 57600 +#default CONFIG_TTYS0_BAUD = 38400 +#default CONFIG_TTYS0_BAUD = 19200 +#default CONFIG_TTYS0_BAUD = 9600 +#default CONFIG_TTYS0_BAUD = 4800 +#default CONFIG_TTYS0_BAUD = 2400 +#default CONFIG_TTYS0_BAUD = 1200 # Select the serial console base port -default TTYS0_BASE = 0x3f8 +default CONFIG_TTYS0_BASE = 0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS = 0x3 +default CONFIG_TTYS0_LCS = 0x3 # Compile extra debugging code -default DEBUG = 1 +default CONFIG_DEBUG = 1 ## ### Select the coreboot loglevel @@ -203,13 +203,13 @@ default DEBUG = 1 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL = 8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL = 8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 # # CBFS |