summaryrefslogtreecommitdiff
path: root/src/mainboard/lippert/frontrunner-af/devicetree.cb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/lippert/frontrunner-af/devicetree.cb')
-rw-r--r--src/mainboard/lippert/frontrunner-af/devicetree.cb95
1 files changed, 22 insertions, 73 deletions
diff --git a/src/mainboard/lippert/frontrunner-af/devicetree.cb b/src/mainboard/lippert/frontrunner-af/devicetree.cb
index d108a11e5d..3a051aa87a 100644
--- a/src/mainboard/lippert/frontrunner-af/devicetree.cb
+++ b/src/mainboard/lippert/frontrunner-af/devicetree.cb
@@ -31,7 +31,7 @@ chip northbridge/amd/agesa/family14/root_complex
device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
device pci 4.0 on end # PCIE P2P bridge on-board NIC
device pci 5.0 off end # PCIE P2P bridge
- device pci 6.0 on end # PCIE P2P bridge PCIe slot
+ device pci 6.0 off end # PCIE P2P bridge
device pci 7.0 off end # PCIE P2P bridge
device pci 8.0 off end # NB/SB Link P2P bridge
end # agesa northbridge
@@ -47,36 +47,34 @@ chip northbridge/amd/agesa/family14/root_complex
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
+ device i2c 51 off end
end
end # SM
- device pci 14.1 on end # IDE 0x439c
+ device pci 14.1 off end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x439d
- chip superio/fintek/f81865f
- device pnp 4e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 4e.3 off end # Parallel Port
- device pnp 4e.4 off end # Hardware Monitor
- device pnp 4e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 4e.6 off end # GPIO
- device pnp 4e.a off end # PME
- device pnp 4e.10 on # COM1
+ chip superio/smsc/smscsuperio
+ device pnp 4e.0 off end # Floppy
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
- device pnp 4e.11 on # COM2
+ device pnp 4e.5 on # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
- end # f81865f
+ device pnp 4e.7 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ irq 0x72 = 12
+ end
+ device pnp 4e.A on # Runtime Regs
+ io 0x60 = 0x0E00
+ drq 0xF0 = 0x0B # no 32kHz
+ end
+ end # smscsuperio
end #LPC
device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
device pci 14.5 off end # OHCI FS/LS USB
@@ -85,59 +83,10 @@ chip northbridge/amd/agesa/family14/root_complex
device pci 15.1 off end # PCIe PortB
device pci 15.2 off end # PCIe PortC
device pci 15.3 off end # PCIe PortD
- device pci 16.0 off end # OHCI USB 10-13
- device pci 16.2 off end # EHCI USB 10-13
- register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+ device pci 16.0 on end # OHCI USB 10-13
+ device pci 16.2 on end # EHCI USB 10-13
+ register "gpp_configuration" = "4" #1:1:1:1
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
-
- #set up SB800 Fan control registers and IMC fan controls
- register "imc_port_address" = "0x6E" # 0x2E and 0x6E are common
- register "fan0_enabled" = "1"
- register "fan1_enabled" = "1"
- register "imc_fan_zone0_enabled" = "1"
- register "imc_fan_zone1_enabled" = "1"
-
- register "fan0_config_vals" = "{ \
- FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
- FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
- register "fan1_config_vals" = "{ \
- FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
- FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
-
- register "imc_zone0_mode1" = " \
- IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
- IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0"
- register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
- IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
- register "imc_zone0_temp_offset" = "0x00" # No temp offset
- register "imc_zone0_hysteresis" = "0x05" # Degrees C Hysteresis
- register "imc_zone0_smbus_addr" = "0x98" # Temp Sensor SMBus address
- register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
- register "imc_zone0_pwm_step" = "0x01" # Fan PWM stepping rate
- register "imc_zone0_ramping" = "0x00" # Disable Fan PWM ramping and stepping
-
- register "imc_zone1_mode1" = " \
- IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
- IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1"
- register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
- IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
- register "imc_zone1_temp_offset" = "0x00" # No temp offset
- register "imc_zone1_hysteresis" = "0x05" # Degrees C Hysteresis
- register "imc_zone1_smbus_addr" = "0x98" # Temp Sensor SMBus address
- register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
- register "imc_zone1_pwm_step" = "0x01" # Fan PWM stepping rate
- register "imc_zone1_ramping" = "0x00" # Disable Fan PWM ramping and stepping
-
- # T56N has a Maximum operating temperature of 90C
- # ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C
- # ZONEX_FANSPEEDS - Fan speeds as a "percentage"
- register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }"
- register "imc_zone0_fanspeeds" = "{100, 7, 5, 4, 3, 2, 0, 0 }"
- register "imc_zone1_thresholds" = "{ 85, 80, 75, 65, 1, 0, 0, 0, 90 }"
- register "imc_zone1_fanspeeds" = "{100, 10, 6, 4, 3, 0, 0, 0 }"
-
end #southbridge/amd/cimx/sb800
# end # device pci 18.0
# These seem unnecessary
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:10:24 +0000