diff options
Diffstat (limited to 'src/mainboard/lenovo')
| -rw-r--r-- | src/mainboard/lenovo/x60/romstage.c | 68 |
1 files changed, 36 insertions, 32 deletions
diff --git a/src/mainboard/lenovo/x60/romstage.c b/src/mainboard/lenovo/x60/romstage.c index 0acf3a2069..222b999334 100644 --- a/src/mainboard/lenovo/x60/romstage.c +++ b/src/mainboard/lenovo/x60/romstage.c @@ -43,28 +43,28 @@ void setup_ich7_gpios(void) printk(BIOS_DEBUG, " GPIOS..."); /* X60 GPIO: - 1: HDD_PRESENCE# - 6: Unknown (Pulled high by R215 to VCC3B) - 7: BDC_PRESENCE# - 8: H8_WAKE# - 9: RTC_BAT_IN# - 10: Unknown (Pulled high by R700 to VCC3M - 12: H8SCI# - 13: SLICE_ON_3M# - 14: Unknown (Pulled high by R321 to VCC3) - 15: Unknown (Pulled high by R258 to VCC3) - 19: Unknown (Pulled low by R594) - 21: Unknown (Pulled high by R145 to VCC3) - 22: FWH_WP# - 25: MDC_KILL# - 33: HDD_PRESENCE_2# - 35: CLKREQ_SATA# - 36: PLANARID0 - 37: PLANARID1 - 38: PLANARID2 - 39: PLANARID3 - 48: FWH_TBL# - */ + * 1: HDD_PRESENCE# + * 6: Unknown (Pulled high by R215 to VCC3B) + * 7: BDC_PRESENCE# + * 8: H8_WAKE# + * 9: RTC_BAT_IN# + * 10: Unknown (Pulled high by R700 to VCC3M) + * 12: H8SCI# + * 13: SLICE_ON_3M# + * 14: Unknown (Pulled high by R321 to VCC3) + * 15: Unknown (Pulled high by R258 to VCC3) + * 19: Unknown (Pulled low by R594) + * 21: Unknown (Pulled high by R145 to VCC3) + * 22: FWH_WP# + * 25: MDC_KILL# + * 33: HDD_PRESENCE_2# + * 35: CLKREQ_SATA# + * 36: PLANARID0 + * 37: PLANARID1 + * 38: PLANARID2 + * 39: PLANARID3 + * 48: FWH_TBL# + */ outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ outl(0xe0e8ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ @@ -107,7 +107,7 @@ static void early_superio_config(void) pnp_write_config(dev, 0x29, 0x06); - while(!(pnp_read_config(dev, 0x29) & 0x08) && timeout--) + while (!(pnp_read_config(dev, 0x29) & 0x08) && timeout--) udelay(1000); /* Enable COM1 */ @@ -146,7 +146,7 @@ static void rcba_config(void) /* Disable unused devices */ RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD; - RCBA32(0x3418) |= (1 << 0); // Required. + RCBA32(0x3418) |= (1 << 0); // Required. /* Set up I/O Trap #0 for 0xfe00 (SMIC) */ RCBA32(0x1e84) = 0x00020001; @@ -236,18 +236,20 @@ void main(unsigned long bist) if (dock_present()) { dock_connect(); early_superio_config(); - /* Set up the console */ } + /* Set up the console */ console_init(); /* Halt if there was a built in self test failure */ report_bist_failure(bist); if (MCHBAR16(SSKPD) == 0xCAFE) { - printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n"); + printk(BIOS_DEBUG, + "Soft reset detected, rebooting properly.\n"); outb(0x6, 0xcf9); - while (1) asm("hlt"); + while (1) + asm("hlt"); } /* Perform some early chipset initialization required @@ -302,7 +304,7 @@ void main(unsigned long bist) { /* This will not work if TSEG is in place! */ - u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c); + u32 tom = pci_read_config32(PCI_DEV(0, 2, 0), 0x5c); printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom); ram_check(0x00000000, 0x000a0000); @@ -329,15 +331,17 @@ void main(unsigned long bist) * day. */ if (resume_backup_memory) - memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE); + memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, + HIGH_MEMORY_SAVE); /* Magic for S3 resume */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC); + pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, + SKPAD_ACPI_S3_MAGIC); } #endif #if CONFIG_CONSOLE_CBMEM - /* Keep this the last thing this function does. */ - cbmemc_reinit(); + /* Keep this the last thing this function does. */ + cbmemc_reinit(); #endif } |