diff options
Diffstat (limited to 'src/mainboard/lenovo/x201/devicetree.cb')
| -rw-r--r-- | src/mainboard/lenovo/x201/devicetree.cb | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/src/mainboard/lenovo/x201/devicetree.cb b/src/mainboard/lenovo/x201/devicetree.cb new file mode 100644 index 0000000000..f800f9af31 --- /dev/null +++ b/src/mainboard/lenovo/x201/devicetree.cb @@ -0,0 +1,145 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2007-2009 coresystems GmbH +## Copyright (C) 2011 Sven Schnelle <svens@stackframe.org> +## +## This program is free software; you can redistribute it and/or +## modify it under the terms of the GNU General Public License as +## published by the Free Software Foundation; version 2 of +## the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +## MA 02110-1301 USA +## + +chip northbridge/intel/nehalem + + + # Enable DisplayPort Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable Panel as LVDS and configure power delays + register "gpu_panel_port_select" = "0" # LVDS + register "gpu_panel_power_cycle_delay" = "3" + register "gpu_panel_power_up_delay" = "250" + register "gpu_panel_power_down_delay" = "250" + register "gpu_panel_power_backlight_on_delay" = "2500" + register "gpu_panel_power_backlight_off_delay" = "2500" + register "gpu_cpu_backlight" = "0x58d" + register "gpu_pch_backlight" = "0x061a061a" + + chip ec/lenovo/pmh7 + device pnp ff.1 on # dummy + end + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + end + + chip ec/lenovo/h8 + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + + register "config0" = "0xa6" + register "config1" = "0x05" + register "config2" = "0xa0" + register "config3" = "0x01" + + register "beepmask0" = "0xfe" + register "beepmask1" = "0x96" + + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xf4" + register "event5_enable" = "0x3c" + register "event6_enable" = "0x80" + register "event7_enable" = "0x01" + register "eventc_enable" = "0x3c" + register "event8_enable" = "0x01" + register "event9_enable" = "0xff" + register "eventa_enable" = "0xff" + register "eventb_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + + register "wlan_enable" = "0x01" + register "trackpoint_enable" = "0x03" + end + + device cpu_cluster 0 on + chip cpu/intel/model_206ax + device lapic 0 on end + end + end + + device domain 0 on + device pci 00.0 on # Host bridge + subsystemid 0x17aa 0x2193 + end + device pci 02.0 on # VGA controller + subsystemid 0x17aa 0x215a + end + chip southbridge/intel/ibexpeak + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + # GPI routing + # 0 No effect (default) + # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + # 2 SCI (if corresponding GPIO_EN bit is also set) + register "gpi1_routing" = "2" + register "gpi13_routing" = "2" + + register "sata_ahci" = "0x1" + register "sata_port_map" = "0x33" + + register "gpe0_en" = "0x20022046" + register "alt_gp_smi_en" = "0x0000" + + device pci 16.2 on # IDE/SATA + subsystemid 0x17aa 0x2161 + end + + device pci 19.0 on # Ethernet + subsystemid 0x17aa 0x2153 + end + + device pci 1a.0 on # USB2 EHCI + subsystemid 0x17aa 0x2163 + end + + device pci 1b.0 on # Audio Controller + subsystemid 0x17aa 0x215e + end + device pci 1d.0 on # USB2 EHCI + subsystemid 0x17aa 0x2163 + end + device pci 1f.0 on # PCI-LPC bridge + subsystemid 0x17aa 0x2166 + end + device pci 1f.2 on # IDE/SATA + subsystemid 0x17aa 0x2168 + end + device pci 1f.3 on # SMBUS + subsystemid 0x17aa 0x2167 + end + end + end +end |