diff options
Diffstat (limited to 'src/mainboard/lenovo/t440p/devicetree.cb')
| -rw-r--r-- | src/mainboard/lenovo/t440p/devicetree.cb | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/src/mainboard/lenovo/t440p/devicetree.cb b/src/mainboard/lenovo/t440p/devicetree.cb new file mode 100644 index 0000000000..7e5e616d03 --- /dev/null +++ b/src/mainboard/lenovo/t440p/devicetree.cb @@ -0,0 +1,113 @@ +chip northbridge/intel/haswell + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.ndid" = "3" + register "gpu_cpu_backlight" = "0x12ba12ba" + register "gpu_ddi_e_connected" = "1" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "1" + register "gpu_panel_power_backlight_on_delay" = "1" + register "gpu_panel_power_cycle_delay" = "6" + register "gpu_panel_power_down_delay" = "500" + register "gpu_panel_power_up_delay" = "2000" + register "gpu_pch_backlight" = "0x12ba12ba" + device cpu_cluster 0x0 on + chip cpu/intel/haswell + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x17aa 0x220e inherit + + device pci 00.0 on end # Host bridge Host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 on end # Internal graphics VGA controller + device pci 03.0 on end # Mini-HD audio Audio controller + + chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH + register "gen1_dec" = "0x007c1601" + register "gen2_dec" = "0x000c15e1" + register "gen4_dec" = "0x000c06a1" + register "gpi13_routing" = "2" + register "gpi1_routing" = "2" + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8a" + register "pirqd_routing" = "0x89" + register "pirqe_routing" = "0x86" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x8b" + register "pirqh_routing" = "0x87" + register "sata_ahci" = "1" + # 0(HDD), 1(M.2), 5(ODD) + register "sata_port_map" = "0x23" + device pci 14.0 on end # xHCI Controller + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio Audio controller + device pci 1c.0 on end # PCIe Port #1, Realtek Card Reader + device pci 1c.1 on # PCIe Port #2, WLAN + smbios_slot_desc "0x14" "1" "M.2 2230" "8" + end + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 off end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1f.0 on # LPC bridge PCI-LPC bridge + chip ec/lenovo/pmh7 + register "backlight_enable" = "0x01" + register "dock_event_enable" = "0x01" + device pnp ff.1 on # dummy + end + end + chip ec/lenovo/h8 + register "beepmask0" = "0x00" + register "beepmask1" = "0x86" + register "config0" = "0xa6" + register "config1" = "0x0d" + register "config2" = "0xa8" + register "config3" = "0xc4" + register "event2_enable" = "0xff" + register "event3_enable" = "0xff" + register "event4_enable" = "0xd0" + register "event5_enable" = "0x3c" + register "event7_enable" = "0x01" + register "event8_enable" = "0x7b" + register "event9_enable" = "0xff" + register "eventc_enable" = "0xff" + register "eventd_enable" = "0xff" + register "evente_enable" = "0x9d" + device pnp ff.2 on # dummy + io 0x60 = 0x62 + io 0x62 = 0x66 + io 0x64 = 0x1600 + io 0x66 = 0x1604 + end + end + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end |