diff options
Diffstat (limited to 'src/mainboard/lenovo/g505s/buildOpts.c')
| -rw-r--r-- | src/mainboard/lenovo/g505s/buildOpts.c | 106 |
1 files changed, 0 insertions, 106 deletions
diff --git a/src/mainboard/lenovo/g505s/buildOpts.c b/src/mainboard/lenovo/g505s/buildOpts.c deleted file mode 100644 index 3bf316e4fd..0000000000 --- a/src/mainboard/lenovo/g505s/buildOpts.c +++ /dev/null @@ -1,106 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include "mainboard.h" - -#include <vendorcode/amd/agesa/f15tn/AGESA.h> - -/* Include the files that instantiate the configuration definitions. */ -#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> -/* AGESA nonsense: the next two headers depend on heapManager.h */ -#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> -#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> -/* These tables are optional and may be used to adjust memory timing settings */ -#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> -#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> - -/* Select the CPU family */ -#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE - -/* Select the CPU socket type */ -#define INSTALL_FS1_SOCKET_SUPPORT TRUE -#define INSTALL_FP2_SOCKET_SUPPORT TRUE - -//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE -#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE -//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE -#define BLDOPT_REMOVE_SRAT FALSE -#define BLDOPT_REMOVE_WHEA FALSE -#define BLDOPT_REMOVE_CRAT TRUE - -/* Build configuration values here */ -#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE - -#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE -#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE -#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE -#define BLDCFG_ENABLE_ECC_FEATURE TRUE -#define BLDCFG_ECC_SYNC_FLOOD FALSE - -#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED -#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000 /* (0x2000 << 16) = 512M */ - -#define BLDCFG_IOMMU_SUPPORT TRUE - -#define BLDCFG_CFG_GNB_HD_AUDIO TRUE - -/* - * The GPIO control is not well documented in AGESA, but is in the BKDG - * - * Eg. FANIN1/GPIO57 on datasheet means power-on default (Function0) is to route - * from this ball to hardware monitor as FAN1 tacho input. Selecting Function1 - * routes this to the GPIO block instead. Seems ACPI GPIOs and related GEVENTs - * are mostly in Function1, sometimes Function2. - * - * Note that the GpioOut bit does not mean that the GPIO is an output. That bit - * actually controls the output value, so GpioOut means "default to set". - * PullUpB is an inverted logic, so setting this bit means we're actually - * disabling the internal pull-up. The PullDown bit is NOT inverted logic. - * The output driver can be disabled with the GpioOutEnB bit, which is again, - * inverted logic. To make the list more readable, we define a few local macros - * to state what we mean. - */ -#define OUTPUT_HIGH (GpioOut) -#define OUTPUT_LOW (0) -#define INPUT (GpioOutEnB) -#define PULL_UP (0) -#define PULL_DOWN (PullDown | PullUpB) -#define PULL_NONE (PullUpB) - -CONST GPIO_CONTROL lenovo_g505s_gpio[] = { - {57, Function1, OUTPUT_HIGH | PULL_NONE}, /* WLAN enable */ - {-1} -}; -#define BLDCFG_FCH_GPIO_CONTROL_LIST (lenovo_g505s_gpio) - -/* - * These definitions could be moved to a common Hudson header, should we decide - * to provide our own, saner SCI mapping function - */ -#define GEVENT_PIN(gpe) ((gpe) + 0x40) -#define SCI_MAP_OHCI_12_0 0x58 -#define SCI_MAP_OHCI_13_0 0x59 -#define SCI_MAP_XHCI_10_0 0x78 -#define SCI_MAP_PWRBTN 0x73 - -CONST SCI_MAP_CONTROL lenovo_g505s_sci_map[] = { - {GEVENT_PIN(EC_SCI_GEVENT), EC_SCI_GPE}, - {GEVENT_PIN(EC_LID_GEVENT), EC_LID_GPE}, - {GEVENT_PIN(PCIE_GEVENT), PCIE_GPE}, - {SCI_MAP_OHCI_12_0, PME_GPE}, - {SCI_MAP_OHCI_13_0, PME_GPE}, - {SCI_MAP_XHCI_10_0, PME_GPE}, - {SCI_MAP_PWRBTN, PME_GPE}, -}; -#define BLDCFG_FCH_SCI_MAP_LIST (lenovo_g505s_sci_map) - -/* - * Process the options... - * This file include MUST occur AFTER the user option selection settings. - * AGESA nonsense: Moving this include up will break AGESA. - */ -#include <PlatformInstall.h> |