summaryrefslogtreecommitdiff
path: root/src/mainboard/kontron
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/kontron')
-rw-r--r--src/mainboard/kontron/986lcd-m/acpi_tables.c60
-rw-r--r--src/mainboard/kontron/986lcd-m/auto.c9
-rw-r--r--src/mainboard/kontron/986lcd-m/fadt.c10
-rw-r--r--src/mainboard/kontron/986lcd-m/mptable.c6
4 files changed, 57 insertions, 28 deletions
diff --git a/src/mainboard/kontron/986lcd-m/acpi_tables.c b/src/mainboard/kontron/986lcd-m/acpi_tables.c
index fbdc9871c9..2f9c1ec71f 100644
--- a/src/mainboard/kontron/986lcd-m/acpi_tables.c
+++ b/src/mainboard/kontron/986lcd-m/acpi_tables.c
@@ -96,30 +96,50 @@ void acpi_create_oemb(acpi_oemb_t *oemb)
unsigned long acpi_fill_mcfg(unsigned long current)
{
-#if 0
device_t dev;
- u64 mmcfg;
+ u32 pciexbar = 0;
+ u32 pciexbar_reg;
+ int max_buses;
- dev = dev_find_device(0x1106, 0x324b, 0); // 0:0x13.0
+ dev = dev_find_device(0x8086, 0x27a0, 0);
if (!dev)
return current;
// MMCFG not supported or not enabled.
- if ((pci_read_config8(dev, 0x40) & 0xC0) != 0xC0)
+ pciexbar_reg=pci_read_config32(dev, 0x48);
+
+ if (!(pciexbar_reg & (1 << 0)))
return current;
- mmcfg = ((u64) pci_read_config8(dev, 0x41)) << 28;
- if (!mmcfg)
+ switch ((pciexbar_reg >> 1) & 3) {
+ case 0: // 256MB
+ pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28));
+ max_buses = 256;
+ break;
+ case 1: // 128M
+ pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
+ max_buses = 128;
+ break;
+ case 2: // 64M
+ pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26));
+ max_buses = 64;
+ break;
+ default: // RSVD
return current;
+ }
+
+ if (!pciexbar)
+ return current;
+
+ current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current,
+ pciexbar, 0x0, 0x0, max_buses - 1);
- current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, mmcfg, 0x0, 0x0, 0xff);
-#endif
return current;
}
void acpi_create_intel_hpet(acpi_hpet_t * hpet)
{
-#define HPET_ADDR 0xfe800000ULL
+#define HPET_ADDR 0xfed00000ULL
acpi_header_t *header = &(hpet->header);
acpi_addr_t *addr = &(hpet->addr);
@@ -135,16 +155,15 @@ void acpi_create_intel_hpet(acpi_hpet_t * hpet)
header->revision = 1;
/* fill out HPET address */
- // XXX factory bios just puts an address here -- who's right?
addr->space_id = 0; /* Memory */
addr->bit_width = 64;
addr->bit_offset = 0;
addr->addrl = HPET_ADDR & 0xffffffff;
addr->addrh = HPET_ADDR >> 32;
- hpet->id = 0x80861234; /* VIA */
+ hpet->id = 0x8086a201; /* Intel */
hpet->number = 0x00;
- hpet->min_tick = 0x0090;
+ hpet->min_tick = 0x0080;
header->checksum =
acpi_checksum((void *) hpet, sizeof(acpi_hpet_t));
@@ -199,10 +218,11 @@ unsigned long write_acpi_tables(unsigned long start)
acpi_oemb_t *oemb;
acpi_header_t *dsdt;
- /* Align ACPI tables to 16byte */
- start = (start + 0x0f) & -0x10;
current = start;
+ /* Align ACPI tables to 16byte */
+ ALIGN_CURRENT;
+
printk_info("ACPI: Writing ACPI tables at %lx.\n", start);
/* We need at least an RSDP and an RSDT Table */
@@ -222,7 +242,6 @@ unsigned long write_acpi_tables(unsigned long start)
/*
* We explicitly add these tables later on:
*/
-#if 0
printk_debug("ACPI: * HPET\n");
hpet = (acpi_hpet_t *) current;
@@ -230,7 +249,7 @@ unsigned long write_acpi_tables(unsigned long start)
ALIGN_CURRENT;
acpi_create_intel_hpet(hpet);
acpi_add_table(rsdt, hpet);
-#endif
+
/* If we want to use HPET Timers Linux wants an MADT */
printk_debug("ACPI: * MADT\n");
@@ -239,14 +258,13 @@ unsigned long write_acpi_tables(unsigned long start)
current += madt->header.length;
ALIGN_CURRENT;
acpi_add_table(rsdt, madt);
-#if 0
+
printk_debug("ACPI: * MCFG\n");
mcfg = (acpi_mcfg_t *) current;
acpi_create_mcfg(mcfg);
current += mcfg->header.length;
ALIGN_CURRENT;
acpi_add_table(rsdt, mcfg);
-#endif
printk_debug("ACPI: * OEMB\n");
oemb=(acpi_oemb_t *)current;
@@ -278,10 +296,10 @@ unsigned long write_acpi_tables(unsigned long start)
/* We patched up the DSDT, so we need to recalculate the checksum */
dsdt->checksum = 0;
- dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
+ dsdt->checksum = acpi_checksum((void *)dsdt, dsdt->length);
#endif
- printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
+ printk_debug("ACPI: * DSDT @ %p Length %x\n", dsdt,
dsdt->length);
printk_debug("ACPI: * FADT\n");
@@ -291,7 +309,7 @@ unsigned long write_acpi_tables(unsigned long start)
acpi_create_fadt(fadt, facs, dsdt);
acpi_add_table(rsdt, fadt);
- printk_debug("current = %x\n", current);
+ printk_debug("current = %lx\n", current);
printk_debug("ACPI: * DMI (Linux workaround)\n");
memcpy((void *)0xfff80, dmi_table, DMI_TABLE_SIZE);
diff --git a/src/mainboard/kontron/986lcd-m/auto.c b/src/mainboard/kontron/986lcd-m/auto.c
index 5a6d88a850..9a202d46c3 100644
--- a/src/mainboard/kontron/986lcd-m/auto.c
+++ b/src/mainboard/kontron/986lcd-m/auto.c
@@ -64,7 +64,7 @@ static void setup_ich7_gpios(void)
outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */
/* Input Control Registers */
outl(0x00002180, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */
- outl(0x000000ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */
+ outl(0x000100ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */
outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */
outl(0x00010035, DEFAULT_GPIOBASE + 0x38); /* GP_LVL */
}
@@ -85,6 +85,8 @@ static inline int spd_read_byte(unsigned device, unsigned address)
* #define will do.
*/
#define OVERRIDE_CLOCK_DISABLE 1
+
+#define CHANNEL_XOR_RANDOMIZATION 1
#include "northbridge/intel/i945/raminit.h"
#include "northbridge/intel/i945/raminit.c"
#include "northbridge/intel/i945/reset_test.c"
@@ -100,7 +102,7 @@ static void ich7_enable_lpc(void)
// Enable COM1/COM2/KBD/SuperIO1+2
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x340b);
// Enable HWM at 0xa00
- pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x0a01);
+ pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x00fc0a01);
// COM3 decode
pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000403e9);
// COM4 decode
@@ -236,7 +238,8 @@ static void rcba_config(void)
RCBA32(0x3400) = (1 << 2);
/* Disable unused devices */
- RCBA32(0x3418) = 0x000e0063;
+ RCBA32(0x3418) = FD_PCIE6|FD_PCIE5|FD_PCIE4|FD_ACMOD|FD_ACAUD|FD_PATA;
+ RCBA32(0x3418) |= (1 << 0); // Required.
/* Enable PCIe Root Port Clock Gate */
// RCBA32(0x341c) = 0x00000001;
diff --git a/src/mainboard/kontron/986lcd-m/fadt.c b/src/mainboard/kontron/986lcd-m/fadt.c
index 3e8b45a876..46c1a124e2 100644
--- a/src/mainboard/kontron/986lcd-m/fadt.c
+++ b/src/mainboard/kontron/986lcd-m/fadt.c
@@ -31,15 +31,16 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
memset((void *) fadt, 0, sizeof(acpi_fadt_t));
memcpy(header->signature, "FACP", 4);
header->length = 132;
- header->revision = 1;
+ header->revision = 2;
memcpy(header->oem_id, "CORE ", 6);
memcpy(header->oem_table_id, "COREBOOT", 8);
memcpy(header->asl_compiler_id, "CORE", 4);
- header->asl_compiler_revision = 0;
+ header->asl_compiler_revision = 1;
fadt->firmware_ctrl = (unsigned long) facs;
fadt->dsdt = (unsigned long) dsdt;
- fadt->preferred_pm_profile = 0;
+ fadt->model = 1;
+ fadt->preferred_pm_profile = 2;
fadt->sci_int = 0x9;
fadt->smi_cmd = 0xb2;
fadt->acpi_enable = 0xe1;
@@ -58,7 +59,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
- fadt->pm2_cnt_len = 1;
+ fadt->pm2_cnt_len = 0;
fadt->pm_tmr_len = 4;
fadt->gpe0_blk_len = 8;
fadt->gpe1_blk_len = 0;
@@ -79,6 +80,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
// all cpus support c1
// sleep button is generic
// rtc wakeup/s4 not possible
+ // use platform timer
header->checksum =
acpi_checksum((void *) fadt, header->length);
diff --git a/src/mainboard/kontron/986lcd-m/mptable.c b/src/mainboard/kontron/986lcd-m/mptable.c
index a239b3ff0c..a3e989127f 100644
--- a/src/mainboard/kontron/986lcd-m/mptable.c
+++ b/src/mainboard/kontron/986lcd-m/mptable.c
@@ -100,6 +100,7 @@ void *smp_write_config_table(void *v)
/* Firewire 4:0.0 */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x0, 0x2, 0x10);
+ /* Old riser card */
// riser slot top 5:8.0
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x20, 0x2, 0x14);
// riser slot middle 5:9.0
@@ -107,6 +108,11 @@ void *smp_write_config_table(void *v)
// riser slot bottom 5:a.0
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x28, 0x2, 0x16);
+ /* New Riser Card */
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x30, 0x2, 0x14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x34, 0x2, 0x15);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, 0x38, 0x2, 0x16);
+
/* Onboard Ethernet */
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x0, 0x2, 0x10);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:56:55 +0000