diff options
Diffstat (limited to 'src/mainboard/jetway/nf81-t56n-lf')
| -rw-r--r-- | src/mainboard/jetway/nf81-t56n-lf/devicetree.cb | 194 |
1 files changed, 97 insertions, 97 deletions
diff --git a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb index dd442b2e3b..6289438e8f 100644 --- a/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb +++ b/src/mainboard/jetway/nf81-t56n-lf/devicetree.cb @@ -15,114 +15,113 @@ # chip northbridge/amd/agesa/family14/root_complex device cpu_cluster 0 on - chip cpu/amd/agesa/family14 - device lapic 0 on end - end + chip cpu/amd/agesa/family14 + device lapic 0 on end + end end device domain 0 on subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] -# device pci 1.1 on end # Internal Audio P2P bridge 0x1314 - device pci 4.0 on end # PCIE P2P bridge PCIe slot - device pci 5.0 off end # PCIE P2P bridge - device pci 6.0 on end # GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) - device pci 7.0 off end # PCIE P2P bridge - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge + chip northbridge/amd/agesa/family14 + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge PCIe slot + device pci 5.0 off end # PCIE P2P bridge + device pci 6.0 on end # GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) + device pci 7.0 off end # PCIE P2P bridge + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 off end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/fintek/f71869ad - register "multi_function_register_1" = "0x01" - register "multi_function_register_2" = "0x6f" - register "multi_function_register_3" = "0x24" - register "multi_function_register_4" = "0x00" - register "multi_function_register_5" = "0x60" + chip southbridge/amd/cimx/sb800 + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 off end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f71869ad + register "multi_function_register_1" = "0x01" + register "multi_function_register_2" = "0x6f" + register "multi_function_register_3" = "0x24" + register "multi_function_register_4" = "0x00" + register "multi_function_register_5" = "0x60" # HWM configuration registers - register "hwm_smbus_address" = "0x98" - register "hwm_smbus_control_reg" = "0x02" - register "hwm_fan_type_sel_reg" = "0x00" - register "hwm_fan1_temp_adj_rate_reg" = "0x33" - register "hwm_fan_mode_sel_reg" = "0x07" - register "hwm_fan1_idx_rpm_mode" = "0x0e" - register "hwm_fan1_seg1_speed_count" = "0xff" - register "hwm_fan1_seg2_speed_count" = "0x0e" - register "hwm_fan1_seg3_speed_count" = "0x07" - register "hwm_fan1_temp_map_sel" = "0x8c" - register "hwm_temp_sensor_type" = "0x0E" # default value + register "hwm_smbus_address" = "0x98" + register "hwm_smbus_control_reg" = "0x02" + register "hwm_fan_type_sel_reg" = "0x00" + register "hwm_fan1_temp_adj_rate_reg" = "0x33" + register "hwm_fan_mode_sel_reg" = "0x07" + register "hwm_fan1_idx_rpm_mode" = "0x0e" + register "hwm_fan1_seg1_speed_count" = "0xff" + register "hwm_fan1_seg2_speed_count" = "0x0e" + register "hwm_fan1_seg3_speed_count" = "0x07" + register "hwm_fan1_temp_map_sel" = "0x8c" + register "hwm_temp_sensor_type" = "0x0E" # default value # # XXX: 4e is the default index port and .xy is the # LDN indexing the pnp_info array found in the superio.c # NB: Jetway board changes the default (0x4e) index port to (0x2e) by pin 124, # see page 18 from Fintek F71869 V1.1 datasheet. - device pnp 2e.00 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.01 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end + device pnp 2e.00 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.01 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end # COM2 not physically wired on board. - device pnp 2e.02 off # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.03 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 2e.04 on # Hardware Monitor - io 0x60 = 0x225 # Fintek datasheet says 0x295. - irq 0x70 = 0 - end - device pnp 2e.05 on # KBC - io 0x60 = 0x060 - irq 0x70 = 1 # Keyboard IRQ - irq 0x72 = 12 # Mouse IRQ - end - device pnp 2e.06 off end # GPIO - device pnp 2e.07 on end # WDT - device pnp 2e.08 off end # CIR - device pnp 2e.0a on end # PME - end # f71869ad - end #LPC - device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # OHCI FS/LS USB (0x4399) - device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) - device pci 15.1 on end # PCIe PortB - device pci 15.2 off end # PCIe PortC - device pci 15.3 off end # PCIe PortD - device pci 16.0 on end # OHCI USB 10-13 (0x4397) - device pci 16.2 on end # EHCI USB 10-13 (0x4396) - register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 - PortA-D on 15.0-3 are each x1 lanes. - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + device pnp 2e.02 off # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.03 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 3 + end + device pnp 2e.04 on # Hardware Monitor + io 0x60 = 0x225 # Fintek datasheet says 0x295. + irq 0x70 = 0 + end + device pnp 2e.05 on # KBC + io 0x60 = 0x060 + irq 0x70 = 1 # Keyboard IRQ + irq 0x72 = 12 # Mouse IRQ + end + device pnp 2e.06 off end # GPIO + device pnp 2e.07 on end # WDT + device pnp 2e.08 off end # CIR + device pnp 2e.0a on end # PME + end # f71869ad + end #LPC + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # OHCI FS/LS USB (0x4399) + device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA (0x43a0) GbE MAC: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 (10ec:8168) + device pci 15.1 on end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 on end # OHCI USB 10-13 (0x4397) + device pci 16.2 on end # EHCI USB 10-13 (0x4396) + register "gpp_configuration" = "4" # GPP_CFGMODE_X1111 - PortA-D on 15.0-3 are each x1 lanes. + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary + end #southbridge/amd/cimx/sb800 + + chip northbridge/amd/agesa/family14 + + # These seem unnecessary device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end @@ -143,6 +142,7 @@ chip northbridge/amd/agesa/family14/root_complex { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses }" - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end # agesa northbridge + end #domain end #northbridge/amd/agesa/family14/root_complex |