diff options
Diffstat (limited to 'src/mainboard/intel')
| -rw-r--r-- | src/mainboard/intel/kunimitsu/devicetree.cb | 182 |
1 files changed, 79 insertions, 103 deletions
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb index 5cc4f2ebc5..f1480f3d7f 100644 --- a/src/mainboard/intel/kunimitsu/devicetree.cb +++ b/src/mainboard/intel/kunimitsu/devicetree.cb @@ -1,132 +1,104 @@ chip soc/intel/skylake - # SerialIO device modes - register "SerialIoDevMode" = "{ \ - [PchSerialIoIndexI2C0] = PchSerialIoPci, \ - [PchSerialIoIndexI2C1] = PchSerialIoPci, \ - [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ - [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ - [PchSerialIoIndexI2C4] = PchSerialIoPci, \ - [PchSerialIoIndexI2C5] = PchSerialIoPci, \ - [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ - [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ - [PchSerialIoIndexUart0] = PchSerialIoPci, \ - [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ - [PchSerialIoIndexUart2] = PchSerialIoPci, \ - }" - - register "PortUsb20Enable[0]" = "1" # Type-C Port 1 - register "PortUsb20Enable[1]" = "1" # Type-C Port 2 - register "PortUsb20Enable[2]" = "1" # Bluetooth - register "PortUsb20Enable[4]" = "1" # Type-A Port (card) - register "PortUsb20Enable[6]" = "1" # Camera - register "PortUsb20Enable[8]" = "1" # Type-A Port (board) - - register "PortUsb30Enable[0]" = "1" # Type-C Port 1 - register "PortUsb30Enable[1]" = "1" # Type-C Port 2 - register "PortUsb30Enable[2]" = "1" # Type-A Port (card) - register "PortUsb30Enable[3]" = "1" # Type-A Port (board) - - register "pirqa_routing" = "0x8b" - register "pirqb_routing" = "0x8a" - register "pirqc_routing" = "0x8b" - register "pirqd_routing" = "0x8b" - register "pirqe_routing" = "0x80" - register "pirqf_routing" = "0x80" - register "pirqg_routing" = "0x80" - register "pirqh_routing" = "0x80" - - # EC range is 0x800-0x9ff - register "gen1_dec" = "0x00fc0801" - register "gen2_dec" = "0x00fc0901" - - # Pcie RootPort - register "PcieRpEnable[0]" = "1" - register "PcieRpEnable[4]" = "1" - register "PcieRpClkReqNumber[0]" = "1" - register "PcieRpClkReqNumber[4]" = "2" - register "PcieRpClkReqSupport[0]" = "1" - register "PcieRpClkReqSupport[4]" = "1" + # Enable deep Sx states + register "deep_s3_enable" = "1" + register "deep_s5_enable" = "1" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" # GPE configuration - register "gpe0_en_1" = "0x00000000" - - # EC_SCI is GPIO36 - register "gpe0_en_2" = "0x00000010" - register "gpe0_en_3" = "0x00000000" - register "gpe0_en_4" = "0x00000000" + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command range is in 0x800-0x8ff + register "gen1_dec" = "0x00fc0801" - # Memory related + # FSP Configuration register "ProbelessTrace" = "0" - - # Lan register "EnableLan" = "0" - - # SATA related register "EnableSata" = "0" register "SataSalpSupport" = "0" register "SataMode" = "0" register "SataPortsEnable[0]" = "0" - register "SsicPortEnable" = "0" - - # Audio related register "EnableAzalia" = "1" - register "EnableTraceHub" = "0" register "DspEnable" = "1" - - # I/O Buffer Ownership: - # 0: HD-A Link - # 1 Shared, HD-A Link and I2S Port - # 3: I2S Ports register "IoBufferOwnership" = "3" - - # SMBUS + register "EnableTraceHub" = "0" + register "XdciEnable" = "0" + register "SsicPortEnable" = "0" register "SmbusEnable" = "1" - - # Camera register "Cio2Enable" = "0" - - # eMMC register "ScsEmmcEnabled" = "1" register "ScsEmmcHs400Enabled" = "1" register "ScsSdCardEnabled" = "2" - - # Integrated Sensor register "IshEnable" = "0" + register "PttSwitch" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" - # Enable deep Sx states - register "deep_s3_enable" = "0" - register "deep_s5_enable" = "1" + # Enable Root port 1 and 5. + register "PcieRpEnable[0]" = "1" + register "PcieRpEnable[4]" = "1" + # Enable CLKREQ# + register "PcieRpClkReqSupport[0]" = "1" + register "PcieRpClkReqSupport[4]" = "1" + # RP 1 uses SRCCLKREQ1# while RP 5 uses SRCCLKREQ2# + register "PcieRpClkReqNumber[0]" = "1" + register "PcieRpClkReqNumber[4]" = "2" - # CPU Thermal participant device - register "Device4Enable" = "1" + register "PortUsb20Enable[0]" = "1" # Type-C Port 1 + register "PortUsb20Enable[1]" = "1" # Type-C Port 2 + register "PortUsb20Enable[2]" = "1" # Bluetooth + register "PortUsb20Enable[4]" = "1" # Type-A Port (card) + register "PortUsb20Enable[6]" = "1" # Camera + register "PortUsb20Enable[8]" = "1" # Type-A Port (board) - # XDCI controller - register "XdciEnable" = "0" + register "PortUsb30Enable[0]" = "1" # Type-C Port 1 + register "PortUsb30Enable[1]" = "1" # Type-C Port 2 + register "PortUsb30Enable[2]" = "1" # Type-A Port (card) + register "PortUsb30Enable[3]" = "1" # Type-A Port (board) - device cpu_cluster 0 on + # Must leave UART0 enabled or SD/eMMC will not work as PCI + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \ + [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoDisabled, \ + [PchSerialIoIndexUart2] = PchSerialIoPci, \ + }" + + device cpu_cluster 0 on device lapic 0 on end end device domain 0 on - # Refered from SKL EDS Vol 1 : Page No: 31-32 device pci 00.0 on end # Host Bridge device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB 3.0 xHCI Controller - device pci 14.1 off end # USB Device Controller (OTG) + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) device pci 14.2 on end # Thermal Subsystem - device pci 15.0 on end # I2C Controller #0 - device pci 15.1 on end # I2C Controller #1 - device pci 15.2 on end # I2C Controller #2 - device pci 15.3 on end # I2C Controller #3 + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 device pci 16.0 on end # Management Engine Interface 1 device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE Redirection (IDE-R) - device pci 16.3 off end # Management Engine Keyboard and Text (KT) Redirection - device pci 16.4 off end # Management Engine Intel MEI #3 - device pci 17.0 off end # SATA Controller - device pci 19.0 on end # UART Controller #2 - device pci 19.1 on end # I2C Controller #5 - device pci 19.2 on end # I2C Controller #4 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 off end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 off end # I2C #5 + device pci 19.2 on end # I2C #4 device pci 1c.0 on end # PCI Express Port 1 device pci 1c.1 off end # PCI Express Port 2 device pci 1c.2 off end # PCI Express Port 3 @@ -140,20 +112,24 @@ chip soc/intel/skylake device pci 1d.2 off end # PCI Express Port 11 device pci 1d.3 off end # PCI Express Port 12 device pci 1e.0 on end # UART #0 - device pci 1e.1 on end # UART #1 - device pci 1e.2 on end # SPI #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 device pci 1e.4 on end # eMMC device pci 1e.5 off end # SDIO device pci 1e.6 on end # SDCard device pci 1f.0 on + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end chip ec/google/chromeec device pnp 0c09.0 on end end end # LPC Interface device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel High Definition Audio (Intel HD Audio) (Audio, Voice, Speech) - device pci 1f.4 on end # SMBus Controller - device pci 1f.5 on end # SPI - device pci 1f.6 off end # GbE Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE end end |