diff options
Diffstat (limited to 'src/mainboard/intel')
6 files changed, 71 insertions, 71 deletions
diff --git a/src/mainboard/intel/coffeelake_rvp/variants/cml_u/overridetree.cb b/src/mainboard/intel/coffeelake_rvp/variants/cml_u/overridetree.cb index 93b5af9394..a8f6766340 100644 --- a/src/mainboard/intel/coffeelake_rvp/variants/cml_u/overridetree.cb +++ b/src/mainboard/intel/coffeelake_rvp/variants/cml_u/overridetree.cb @@ -86,7 +86,7 @@ chip soc/intel/cannonlake end device pci 14.5 on end # SDCard device pci 15.0 on end # I2C #0 - device pci 15.1 on end # I2C #1 + device pci 15.1 on end # I2C #1 device pci 15.2 off end # I2C #2 device pci 15.3 off end # I2C #3 device pci 17.0 on end # SATA @@ -95,7 +95,7 @@ chip soc/intel/cannonlake device pci 19.2 on end # UART #2 device pci 1a.0 on end # eMMC device pci 1c.0 on end # PCI Express Port 1 x4 SLOT1 - device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN + device pci 1c.4 on end # PCI Express Port 5 x1 SLOT2/LAN device pci 1c.5 off end # PCI Express Port 6 device pci 1c.6 off end # PCI Express Port 7 device pci 1c.7 off end # PCI Express Port 8 diff --git a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb index 616e35c1b4..ae2aaf36ae 100644 --- a/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb +++ b/src/mainboard/intel/jasperlake_rvp/variants/jslrvp/devicetree.cb @@ -150,8 +150,8 @@ chip soc/intel/jasperlake } }, .i2c[5] = { - .speed = I2C_SPEED_FAST, - }, + .speed = I2C_SPEED_FAST, + }, }" device domain 0 on @@ -248,39 +248,39 @@ chip soc/intel/jasperlake end device pci 14.5 on end # SDCard device pci 15.0 on - chip drivers/i2c/max98373 - register "vmon_slot_no" = "4" - register "imon_slot_no" = "5" - register "uid" = "0" - register "desc" = ""RIGHT SPEAKER AMP"" - register "name" = ""MAXR"" - device i2c 31 on end - end - chip drivers/i2c/max98373 - register "vmon_slot_no" = "6" - register "imon_slot_no" = "7" - register "uid" = "1" - register "desc" = ""LEFT SPEAKER AMP"" - register "name" = ""MAXL"" - device i2c 32 on end - end - chip drivers/i2c/da7219 - register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H16_IRQ)" - register "btn_cfg" = "50" - register "mic_det_thr" = "500" - register "jack_ins_deb" = "20" - register "jack_det_rate" = ""32ms_64ms"" - register "jack_rem_deb" = "1" - register "a_d_btn_thr" = "0xa" - register "d_b_btn_thr" = "0x16" - register "b_c_btn_thr" = "0x21" - register "c_mic_btn_thr" = "0x3e" - register "btn_avg" = "4" - register "adc_1bit_rpt" = "1" - register "micbias_lvl" = "2600" - register "mic_amp_in_sel" = ""diff"" - device i2c 1a on end - end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "4" + register "imon_slot_no" = "5" + register "uid" = "0" + register "desc" = ""RIGHT SPEAKER AMP"" + register "name" = ""MAXR"" + device i2c 31 on end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "6" + register "imon_slot_no" = "7" + register "uid" = "1" + register "desc" = ""LEFT SPEAKER AMP"" + register "name" = ""MAXL"" + device i2c 32 on end + end + chip drivers/i2c/da7219 + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H16_IRQ)" + register "btn_cfg" = "50" + register "mic_det_thr" = "500" + register "jack_ins_deb" = "20" + register "jack_det_rate" = ""32ms_64ms"" + register "jack_rem_deb" = "1" + register "a_d_btn_thr" = "0xa" + register "d_b_btn_thr" = "0x16" + register "b_c_btn_thr" = "0x21" + register "c_mic_btn_thr" = "0x3e" + register "btn_avg" = "4" + register "adc_1bit_rpt" = "1" + register "micbias_lvl" = "2600" + register "mic_amp_in_sel" = ""diff"" + device i2c 1a on end + end end # I2C #0 Audio device pci 15.1 off end # I2C #1 device pci 15.2 off end # I2C #2 @@ -296,14 +296,14 @@ chip soc/intel/jasperlake device pci 19.1 on end # I2C #5 Cam 1 and VCM device pci 19.2 on end # UART #2 device pci 1a.0 on end # eMMC - device pci 1c.0 on end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 on end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 on end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 device pci 1e.0 on end # UART #0 device pci 1e.1 off end # UART #1 device pci 1e.2 off end # GSPI #0 diff --git a/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb index 5cfb10da50..9c9a2e767b 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp3/overridetree.cb @@ -7,8 +7,8 @@ chip soc/intel/skylake register "gen2_dec" = "0x000c0201" # FSP Configuration - register "DspEnable" = "1" - register "IoBufferOwnership" = "0" + register "DspEnable" = "1" + register "IoBufferOwnership" = "0" register "HeciEnabled" = "0" register "PmTimerDisabled" = "1" register "Cio2Enable" = "1" diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb index e6c5c38d73..26be7dd751 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp7/overridetree.cb @@ -117,25 +117,25 @@ chip soc/intel/skylake register "PcieRpClkSrcNumber[8]" = "1" # USB 2.0 Enable all ports - register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port - register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port - register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth - register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-A Port - register "usb2_ports[5]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port - register "usb2_ports[6]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port - register "usb2_ports[7]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port - register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port - register "usb2_ports[9]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port - register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port - register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port - - # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port - register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port - register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port + register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-A Port + register "usb2_ports[5]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[6]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[7]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port + register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[9]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port + + # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port register "SerialIoDevMode" = "{ \ [PchSerialIoIndexI2C0] = PchSerialIoPci, \ diff --git a/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb b/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb index 85f9e51084..5d4d2462b2 100644 --- a/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb +++ b/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb @@ -32,8 +32,8 @@ chip soc/intel/tigerlake register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Not used register "usb3_ports[3]" = "USB3_PORT_EMPTY" # USB3/USB2 Flex Connector - # CPU replacement check - register "CpuReplacementCheck" = "1" + # CPU replacement check + register "CpuReplacementCheck" = "1" # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f register "gen1_dec" = "0x00fc0801" @@ -138,7 +138,7 @@ chip soc/intel/tigerlake }, .i2c[2] = { .speed = I2C_SPEED_FAST, - }, + }, .i2c[3] = { .speed = I2C_SPEED_FAST, }, diff --git a/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb b/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb index 5c275b3951..ccc4df89bb 100644 --- a/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb +++ b/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb @@ -32,8 +32,8 @@ chip soc/intel/tigerlake register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Not used register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # USB3/USB2 Flex Connector - # CPU replacement check - register "CpuReplacementCheck" = "1" + # CPU replacement check + register "CpuReplacementCheck" = "1" # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f register "gen1_dec" = "0x00fc0801" |