diff options
Diffstat (limited to 'src/mainboard/intel')
| -rw-r--r-- | src/mainboard/intel/adlrvp/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/intel/adlrvp/devicetree.cb | 102 |
2 files changed, 102 insertions, 1 deletions
diff --git a/src/mainboard/intel/adlrvp/Kconfig b/src/mainboard/intel/adlrvp/Kconfig index c1c45868ae..8a64e49735 100644 --- a/src/mainboard/intel/adlrvp/Kconfig +++ b/src/mainboard/intel/adlrvp/Kconfig @@ -10,6 +10,7 @@ config BOARD_SPECIFIC_OPTIONS select DRIVERS_I2C_HID select DRIVERS_I2C_GENERIC select DRIVERS_INTEL_SOUNDWIRE + select DRIVERS_INTEL_DPTF select DRIVERS_INTEL_PMC if BOARD_INTEL_ADLRVP_P_EXT_EC || BOARD_INTEL_ADLRVP_M_EXT_EC select DRIVERS_USB_ACPI select DRIVERS_SPI_ACPI diff --git a/src/mainboard/intel/adlrvp/devicetree.cb b/src/mainboard/intel/adlrvp/devicetree.cb index cf9861f63a..23913ccc67 100644 --- a/src/mainboard/intel/adlrvp/devicetree.cb +++ b/src/mainboard/intel/adlrvp/devicetree.cb @@ -132,6 +132,12 @@ chip soc/intel/alderlake register "TcssAuxOri" = "0" register "s0ix_enable" = "1" + register "dptf_enable" = "1" + + register "power_limits_config" = "{ + .tdp_pl1_override = 45, + .tdp_pl2_override = 56, + }" register "SerialIoI2cMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, @@ -201,7 +207,101 @@ chip soc/intel/alderlake device pci 00.0 on end # Host Bridge device pci 01.0 on end # PEG10 device pci 02.0 on end # Graphics - device pci 04.0 on end # DPTF + device pci 04.0 on + chip drivers/intel/dptf + + ## sensor information + register "options.tsr[0].desc" = ""Ambient"" + register "options.tsr[1].desc" = ""Battery"" + register "options.tsr[2].desc" = ""DDR"" + register "options.tsr[3].desc" = ""Skin"" + + ## Active Policy + # TODO: below values are initial reference values only + register "policies.active" = "{ + [0] = { + .target = DPTF_CPU, + .thresholds = { + TEMP_PCT(95, 90), + TEMP_PCT(90, 80), + } + }, + [1] = { + .target = DPTF_TEMP_SENSOR_0, + .thresholds = { + TEMP_PCT(80, 90), + TEMP_PCT(70, 80), + } + } + }" + + ## Passive Policy + # TODO: below values are initial reference values only + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 95, 10000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 85, 50000), + [2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 85, 50000), + [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 85, 50000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 85, 50000), + }" + + ## Critical Policy + # TODO: below values are initial reference values only + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 95, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 95, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 95, SHUTDOWN), + [4] = DPTF_CRITICAL(TEMP_SENSOR_3, 95, SHUTDOWN), + }" + + ## Power Limits Control + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 35000, + .max_power = 45000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 56000, + .max_power = 56000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 3000 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 on end + end + end # DPTF device pci 05.0 on end # IPU device pci 06.0 on end # PEG60 device pci 06.2 on end # PEG62 |