summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/intel')
-rw-r--r--src/mainboard/intel/baskingridge/romstage.c136
1 files changed, 33 insertions, 103 deletions
diff --git a/src/mainboard/intel/baskingridge/romstage.c b/src/mainboard/intel/baskingridge/romstage.c
index 2a8e910490..9561456ad7 100644
--- a/src/mainboard/intel/baskingridge/romstage.c
+++ b/src/mainboard/intel/baskingridge/romstage.c
@@ -33,7 +33,7 @@
#include "northbridge/intel/haswell/haswell.h"
#include "northbridge/intel/haswell/raminit.h"
#include "southbridge/intel/lynxpoint/pch.h"
-#include "southbridge/intel/lynxpoint/gpio.h"
+#include "southbridge/intel/lynxpoint/me.h"
#include <arch/cpu.h>
#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
@@ -42,22 +42,7 @@
#include <vendorcode/google/chromeos/chromeos.h>
#endif
-static void pch_enable_lpc(void)
-{
- device_t dev = PCH_LPC_DEV;
-
- /* Set COM1/COM2 decode range */
- pci_write_config16(dev, LPC_IO_DEC, 0x0010);
-
- /* Enable SuperIO + COM1 + PS/2 Keyboard/Mouse */
- u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN | KBC_LPC_EN;
- pci_write_config16(dev, LPC_EN, lpc_config);
-}
-
-static void rcba_config(void)
-{
- u32 reg32;
-
+const struct rcba_config_instruction rcba_config[] = {
/*
* GFX INTA -> PIRQA (MSI)
* D28IP_P1IP WLAN INTA -> PIRQB
@@ -71,55 +56,42 @@ static void rcba_config(void)
*/
/* Device interrupt pin register (board specific) */
- RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
- (INTB << D31IP_SMIP) | (INTA << D31IP_SIP);
- RCBA32(D30IP) = (NOINT << D30IP_PIP);
- RCBA32(D29IP) = (INTA << D29IP_E1P);
- RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
- (INTB << D28IP_P4IP);
- RCBA32(D27IP) = (INTA << D27IP_ZIP);
- RCBA32(D26IP) = (INTA << D26IP_E2P);
- RCBA32(D25IP) = (NOINT << D25IP_LIP);
- RCBA32(D22IP) = (NOINT << D22IP_MEI1IP);
+ RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
+ RCBA_SET_REG_32(D30IP, (NOINT << D30IP_PIP)),
+ RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)),
+ RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP)),
+ RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)),
+ RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)),
+ RCBA_SET_REG_32(D25IP, (NOINT << D25IP_LIP)),
+ RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)),
/* Device interrupt route registers */
- DIR_ROUTE(D31IR, PIRQF, PIRQG, PIRQH, PIRQA);
- DIR_ROUTE(D29IR, PIRQD, PIRQE, PIRQF, PIRQG);
- DIR_ROUTE(D28IR, PIRQB, PIRQC, PIRQD, PIRQE);
- DIR_ROUTE(D27IR, PIRQG, PIRQH, PIRQA, PIRQB);
- DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH);
- DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD);
- DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD);
-
- /* Enable IOAPIC (generic) */
- RCBA16(OIC) = 0x0100;
- /* PCH BWG says to read back the IOAPIC enable register */
- (void) RCBA16(OIC);
+ RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQF, PIRQG, PIRQH, PIRQA)),
+ RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG)),
+ RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE)),
+ RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQH, PIRQA, PIRQB)),
+ RCBA_SET_REG_32(D26IR, DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH)),
+ RCBA_SET_REG_32(D25IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
+ RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),
/* Disable unused devices (board specific) */
- reg32 = RCBA32(FD);
- reg32 |= PCH_DISABLE_ALWAYS;
- RCBA32(FD) = reg32;
-}
+ RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
-// FIXME, this function is generic code that should go to sb/... or
-// nb/../early_init.c
-static void early_pch_init(void)
-{
- u8 reg8;
+ /* Enable IOAPIC (generic) */
+ RCBA_SET_REG_16(OIC, 0x0100),
+ /* PCH BWG says to read back the IOAPIC enable register */
+ RCBA_READ_REG_16(OIC),
- // reset rtc power status
- reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4);
- reg8 &= ~(1 << 2);
- pci_write_config8(PCH_LPC_DEV, 0xa4, reg8);
-}
+ RCBA_END_CONFIG,
+};
void main(unsigned long bist)
{
int boot_mode = 0;
+ int wake_from_s3;
int cbmem_was_initted;
- u32 pm1_cnt;
- u16 pm1_sts;
#if CONFIG_COLLECT_TIMESTAMPS
tsc_t start_romstage_time;
@@ -180,64 +152,26 @@ void main(unsigned long bist)
if (bist == 0)
enable_lapic();
- pch_enable_lpc();
-
- /* Enable GPIOs */
- pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1);
- pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
- setup_pch_gpios(&mainboard_gpio_map);
-
- /* Early Console setup */
- console_init();
+ wake_from_s3 = early_pch_init(&mainboard_gpio_map, &rcba_config[0]);
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
- /*
- * FIXME: MCHBAR isn't setup yet. It's setup in
- * haswell_early_initialization().
- */
- if (MCHBAR16(SSKPD) == 0xCAFE) {
- printk(BIOS_DEBUG, "soft reset detected\n");
- boot_mode = 1;
-
- /* System is not happy after keyboard reset... */
- printk(BIOS_DEBUG, "Issuing CF9 warm reset\n");
- outb(0x6, 0xcf9);
- while (1) {
- hlt();
- }
- }
-
/* Perform some early chipset initialization required
* before RAM initialization can work
*/
haswell_early_initialization(HASWELL_MOBILE);
printk(BIOS_DEBUG, "Back from haswell_early_initialization()\n");
- /* Check PM1_STS[15] to see if we are waking from Sx */
- pm1_sts = inw(DEFAULT_PMBASE + PM1_STS);
-
- /* Read PM1_CNT[12:10] to determine which Sx state */
- pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT);
-
- if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) {
+ if (wake_from_s3) {
#if CONFIG_HAVE_ACPI_RESUME
printk(BIOS_DEBUG, "Resume from S3 detected.\n");
boot_mode = 2;
- /* Clear SLP_TYPE. This will break stage2 but
- * we care for that when we get there.
- */
- outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT);
#else
printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
#endif
}
- post_code(0x38);
- /* Enable SPD ROMs and DDR-III DRAM */
- enable_smbus();
-
/* Prepare USB controller early in S3 resume */
if (boot_mode == 2)
enable_usb_bar();
@@ -247,21 +181,17 @@ void main(unsigned long bist)
#if CONFIG_COLLECT_TIMESTAMPS
before_dram_time = rdtsc();
#endif
+
+ report_platform_info();
+
sdram_initialize(&pei_data);
#if CONFIG_COLLECT_TIMESTAMPS
after_dram_time = rdtsc();
#endif
post_code(0x3b);
- /* Perform some initialization that must run before stage2 */
- early_pch_init();
- post_code(0x3c);
- /* This should probably go away. Until now it is required
- * and mainboard specific
- */
- rcba_config();
- post_code(0x3d);
+ intel_early_me_status();
quick_ram_check();
post_code(0x3e);
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 14:07:13 +0000