aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/intel/xe7501devkit
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/intel/xe7501devkit')
-rw-r--r--src/mainboard/intel/xe7501devkit/Config.lb440
-rw-r--r--src/mainboard/intel/xe7501devkit/Options.lb473
-rw-r--r--src/mainboard/intel/xe7501devkit/acpi_tables.c242
-rw-r--r--src/mainboard/intel/xe7501devkit/auto.c184
-rw-r--r--src/mainboard/intel/xe7501devkit/bus.h34
-rw-r--r--src/mainboard/intel/xe7501devkit/chip.h12
-rw-r--r--src/mainboard/intel/xe7501devkit/cmos.layout4
-rw-r--r--src/mainboard/intel/xe7501devkit/failover.c94
-rw-r--r--src/mainboard/intel/xe7501devkit/ioapic.h22
-rw-r--r--src/mainboard/intel/xe7501devkit/irq_tables.c148
-rw-r--r--src/mainboard/intel/xe7501devkit/mainboard.c24
-rw-r--r--src/mainboard/intel/xe7501devkit/mptable.c360
12 files changed, 1024 insertions, 1013 deletions
diff --git a/src/mainboard/intel/xe7501devkit/Config.lb b/src/mainboard/intel/xe7501devkit/Config.lb
index 65ea45b566..2e1986369e 100644
--- a/src/mainboard/intel/xe7501devkit/Config.lb
+++ b/src/mainboard/intel/xe7501devkit/Config.lb
@@ -1,224 +1,224 @@
-##################################################################
-## BEGIN BOILERPLATE - DO NOT EDIT
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus payload) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
-# The fallback image uses FALLBACK_SIZE bytes at the end of the ROM
-
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-
-else
-# The normal image goes at the beginning of the LinuxBIOS ROM region
-# and uses all the remaining space
-
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-default XIP_ROM_SIZE = 65536
-default XIP_ROM_BASE = ((( _ROMBASE + ROM_IMAGE_SIZE ) / XIP_ROM_SIZE ) * XIP_ROM_SIZE - XIP_ROM_SIZE )
-
-## END BOILERPLATE
-##################################################################
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
-if HAVE_ACPI_TABLES object acpi_tables.o end
-object reset.o
-
-# Include the VGA option ROM, but only if we're compiled to use it
-if CONFIG_PCI_ROM_RUN
- if CONFIG_CONSOLE_VGA
- object vgarom.S
- else
- object no_vgarom.S
- end
-else
- object no_vgarom.S
-end
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if HAVE_FALLBACK_BOOT
- if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
- else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
- end
-else
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit cpu/x86/mmx/enable_mmx.inc
-mainboardinit cpu/x86/sse/enable_sse.inc
-mainboardinit ./auto.inc
-mainboardinit cpu/x86/sse/disable_sse.inc
-mainboardinit cpu/x86/mmx/disable_mmx.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-
-if CONFIG_CHIP_NAME
- config chip.h
-end
-
-# based on sample config for tyan/s2735
-chip northbridge/intel/e7501
- device pci_domain 0 on
- device pci 0.0 on end # Chipset host controller
- device pci 0.1 on end # Host RASUM controller
- device pci 2.0 on # Hub interface B
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 3.0 off end # Hub interface C (82808AA connector - disable for now)
- device pci 4.0 on # Hub interface D
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 6.0 on end # E7501 Power management registers? (undocumented)
- chip southbridge/intel/i82801ca
- device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at)
- device pci 1d.1 off end # USB (not populated)
- device pci 1d.2 off end # USB (not populated)
- device pci 1e.0 on # Hub to PCI bridge
+##################################################################
+## BEGIN BOILERPLATE - DO NOT EDIT
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus payload) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+# The fallback image uses FALLBACK_SIZE bytes at the end of the ROM
+
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+
+else
+# The normal image goes at the beginning of the LinuxBIOS ROM region
+# and uses all the remaining space
+
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+default XIP_ROM_SIZE = 65536
+default XIP_ROM_BASE = ((( _ROMBASE + ROM_IMAGE_SIZE ) / XIP_ROM_SIZE ) * XIP_ROM_SIZE - XIP_ROM_SIZE )
+
+## END BOILERPLATE
+##################################################################
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+if HAVE_ACPI_TABLES object acpi_tables.o end
+object reset.o
+
+# Include the VGA option ROM, but only if we're compiled to use it
+if CONFIG_PCI_ROM_RUN
+ if CONFIG_CONSOLE_VGA
+ object vgarom.S
+ else
+ object no_vgarom.S
+ end
+else
+ object no_vgarom.S
+end
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./failover.inc
+ depends "$(MAINBOARD)/failover.c ./romcc"
+ action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -E -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+ depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+ action "./romcc -mcpu=p4 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+if HAVE_FALLBACK_BOOT
+ if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+ else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+ end
+else
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+end
+
+### Should this be in the northbridge code?
+mainboardinit arch/i386/lib/cpu_reset.inc
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if USE_FALLBACK_IMAGE
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+# based on sample config for tyan/s2735
+chip northbridge/intel/e7501
+ device pci_domain 0 on
+ device pci 0.0 on end # Chipset host controller
+ device pci 0.1 on end # Host RASUM controller
+ device pci 2.0 on # Hub interface B
+ chip southbridge/intel/i82870 # P64H2
+ device pci 1c.0 on end # IOAPIC - bus B
+ device pci 1d.0 on end # Hub to PCI-B bridge
+ device pci 1e.0 on end # IOAPIC - bus A
+ device pci 1f.0 on end # Hub to PCI-A bridge
+ end
+ end
+ device pci 3.0 off end # Hub interface C (82808AA connector - disable for now)
+ device pci 4.0 on # Hub interface D
+ chip southbridge/intel/i82870 # P64H2
+ device pci 1c.0 on end # IOAPIC - bus B
+ device pci 1d.0 on end # Hub to PCI-B bridge
+ device pci 1e.0 on end # IOAPIC - bus A
+ device pci 1f.0 on end # Hub to PCI-A bridge
+ end
+ end
+ device pci 6.0 on end # E7501 Power management registers? (undocumented)
+ chip southbridge/intel/i82801ca
+ device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at)
+ device pci 1d.1 off end # USB (not populated)
+ device pci 1d.2 off end # USB (not populated)
+ device pci 1e.0 on # Hub to PCI bridge
chip drivers/pci/onboard # VGA ROM
device pci 0.0 on end
register "rom_address" = "_vgarom_start"
- end
+ end
end
- device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47b272
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.a off end # ACPI
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end # AC97 Audio
- device pci 1f.6 off end # AC97 Modem
- end # SB
- end # PCI_DOMAIN
- device apic_cluster 0 on
- chip cpu/intel/socket_mPGA604_533Mhz
- device apic 0 on end
- end
- chip cpu/intel/socket_mPGA604_533Mhz
- device apic 6 on end
- end
- end
-end
+ device pci 1f.0 on # LPC bridge
+ chip superio/smsc/lpc47b272
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.5 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.7 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1 # Keyboard interrupt
+ irq 0x72 = 12 # Mouse interrupt
+ end
+ device pnp 2e.a off end # ACPI
+ end
+ end
+ device pci 1f.1 on end # IDE
+ device pci 1f.3 on end # SMBus
+ device pci 1f.5 off end # AC97 Audio
+ device pci 1f.6 off end # AC97 Modem
+ end # SB
+ end # PCI_DOMAIN
+ device apic_cluster 0 on
+ chip cpu/intel/socket_mPGA604_533Mhz
+ device apic 0 on end
+ end
+ chip cpu/intel/socket_mPGA604_533Mhz
+ device apic 6 on end
+ end
+ end
+end
diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb
index b034ed6158..0b0588b2e6 100644
--- a/src/mainboard/intel/xe7501devkit/Options.lb
+++ b/src/mainboard/intel/xe7501devkit/Options.lb
@@ -1,234 +1,239 @@
-uses HAVE_MP_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_PIRQ_TABLE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_OPTION_TABLE
-uses IRQ_SLOT_COUNT
-uses CONFIG_MAX_CPUS
-uses CONFIG_LOGICAL_CPUS
-uses CONFIG_MAX_PHYSICAL_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses CONFIG_ROM_STREAM
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-uses HAVE_INIT_TIMER
-uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-uses CONFIG_CHIP_NAME
-uses CONFIG_CONSOLE_VGA
-uses CONFIG_PCI_ROM_RUN
-uses DEBUG
-uses CPU_OPT
-uses CONFIG_IDE
-
-## The default definitions are used for these
-uses CONFIG_ROM_STREAM_START
-uses PAYLOAD_SIZE
-
-## These are defined in target Config.lb, don't add here
-uses USE_FALLBACK_IMAGE
-uses ROM_SIZE
-uses ROM_IMAGE_SIZE
-uses FALLBACK_SIZE
-uses LINUXBIOS_EXTRA_VERSION
-
-## These are defined in mainboard Config.lb, don't add here
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot?
-##
-default HAVE_FALLBACK_BOOT=0
-
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=12
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-## Build code to export ACPI tables?
-default HAVE_ACPI_TABLES=1
-
-##
-## Build code to export a CMOS option table?
-##
-default HAVE_OPTION_TABLE=0
-
-## CMOS checksum definitions (units == bytes)
-## These must match the checksum record in cmos.layout
-default LB_CKS_RANGE_START=128
-default LB_CKS_RANGE_END=130
-default LB_CKS_LOC=131
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-## NOTE: CONFIG_MAX_CPUS is the number of LOGICAL CPUs,
-## so if CONFIG_LOGICAL_CPUS is 1, CONFIG_MAX_CPUS should be 4.
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-default CONFIG_LOGICAL_CPUS=0
-default CONFIG_MAX_PHYSICAL_CPUS=2
-
-# VGA Console
-# NOTE: to initialize VGA, need to copy the VGA option ROM from the factory BIOS
-# to VGA.rom
-default CONFIG_CONSOLE_VGA=0
-default CONFIG_PCI_ROM_RUN=0
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Motherboard identification
-##
-default MAINBOARD_PART_NUMBER="EIDXE7501DEVKIT"
-default MAINBOARD_VENDOR="Intel"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480
-
-###
-### LinuxBIOS layout values
-###
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## CMOS settings not currently supported due to conflicts with factory BIOS
-##
-default USE_OPTION_TABLE = 0
-
-##
-## LinuxBIOS C code runs at this location in RAM
-##
-default _RAMBASE=0x00004000
-
-##
-## Load the payload from the ROM
-##
-default CONFIG_ROM_STREAM = 1
-
-###
-### Defaults of options that you may want to override in the target config file
-###
-
-##
-## The default compiler
-##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## Disable the gdb stub by default
-##
-default CONFIG_GDB_STUB=0
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-##
-## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
-
-## Things we may not have
-default CONFIG_IDE=1
-
-default DEBUG=1
-default CPU_OPT="-g"
-default CONFIG_CHIP_NAME=1
-
-### End Options.lb
-end
+uses HAVE_MP_TABLE
+uses HAVE_ACPI_TABLES
+uses HAVE_PIRQ_TABLE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_OPTION_TABLE
+uses IRQ_SLOT_COUNT
+uses CONFIG_MAX_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses CONFIG_ROM_STREAM
+uses STACK_SIZE
+uses HEAP_SIZE
+uses USE_OPTION_TABLE
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses _RAMBASE
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_UDELAY_TSC
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses DEBUG
+uses CPU_OPT
+uses CONFIG_IDE
+
+## The default definitions are used for these
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+
+## These are defined in target Config.lb, don't add here
+uses USE_FALLBACK_IMAGE
+uses ROM_SIZE
+uses ROM_IMAGE_SIZE
+uses FALLBACK_SIZE
+uses LINUXBIOS_EXTRA_VERSION
+
+## These are defined in mainboard Config.lb, don't add here
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
+###
+### Build options
+###
+
+##
+## ROM_SIZE is the size of boot ROM that this board will use.
+##
+default ROM_SIZE=2097152
+
+##
+## Build code for the fallback boot?
+##
+default HAVE_FALLBACK_BOOT=0
+
+
+## Delay timer options
+##
+default CONFIG_UDELAY_TSC=1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=1
+default IRQ_SLOT_COUNT=12
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+## Build code to export ACPI tables?
+default HAVE_ACPI_TABLES=1
+
+##
+## Build code to export a CMOS option table?
+##
+default HAVE_OPTION_TABLE=0
+
+## CMOS checksum definitions (units == bytes)
+## These must match the checksum record in cmos.layout
+default LB_CKS_RANGE_START=128
+default LB_CKS_RANGE_END=130
+default LB_CKS_LOC=131
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+## NOTE: CONFIG_MAX_CPUS is the number of LOGICAL CPUs,
+## so if CONFIG_LOGICAL_CPUS is 1, CONFIG_MAX_CPUS should be 4.
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=2
+default CONFIG_LOGICAL_CPUS=0
+default CONFIG_MAX_PHYSICAL_CPUS=2
+
+# VGA Console
+# NOTE: to initialize VGA, need to copy the VGA option ROM from the factory BIOS
+# to VGA.rom
+default CONFIG_CONSOLE_VGA=0
+default CONFIG_PCI_ROM_RUN=0
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Motherboard identification
+##
+default MAINBOARD_PART_NUMBER="EIDXE7501DEVKIT"
+default MAINBOARD_VENDOR="Intel"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x8086
+default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2480
+
+###
+### LinuxBIOS layout values
+###
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default HEAP_SIZE=0x4000
+
+##
+## CMOS settings not currently supported due to conflicts with factory BIOS
+##
+default USE_OPTION_TABLE = 0
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_STREAM = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+## Things we may not have
+default CONFIG_IDE=1
+
+default DEBUG=1
+default CPU_OPT="-g"
+default CONFIG_CHIP_NAME=1
+
+### End Options.lb
+end
diff --git a/src/mainboard/intel/xe7501devkit/acpi_tables.c b/src/mainboard/intel/xe7501devkit/acpi_tables.c
index 94cdb871ef..7d1261c57f 100644
--- a/src/mainboard/intel/xe7501devkit/acpi_tables.c
+++ b/src/mainboard/intel/xe7501devkit/acpi_tables.c
@@ -1,118 +1,124 @@
-/*
- * Ported to Intel XE7501DEVKIT from Island Aruma
- * written by Stefan Reinauer <stepan@openbios.org>
- * (C) 2005 Stefan Reinauer
- * (C) 2005 Digital Design Corporation
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <assert.h>
-#include "bus.h"
-#include "ioapic.h"
-
-unsigned long acpi_dump_apics(unsigned long current)
-{
- unsigned int irq_start = 0;
- device_t dev = 0;
- struct resource* res = NULL;
-
-
- // SJM: Hard-code CPU LAPIC entries for now
- // Use SourcePoint numbering of processors
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 6);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 7);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 0);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 1);
-
-
- // Southbridge IOAPIC
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH3, 0xfec00000, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#2 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#2 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
-
- // P64H2#1 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#1 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // Map ISA IRQ 0 to IRQ 2
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0);
-
- // IRQ9 differs from ISA standard - ours is active high, level-triggered
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD);
-
- return current;
-}
-
-
-unsigned long write_acpi_tables(unsigned long start)
-{
- unsigned long current;
- acpi_rsdp_t *rsdp;
- acpi_rsdt_t *rsdt;
- acpi_madt_t *madt;
-
- /* Align ACPI tables to 16byte */
- start = ( start + 0x0f ) & -0x10;
- current = start;
-
- printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
-
- /* We need at least an RSDP and an RSDT Table */
- rsdp = (acpi_rsdp_t *) current;
- current += sizeof(acpi_rsdp_t);
- rsdt = (acpi_rsdt_t *) current;
- current += sizeof(acpi_rsdt_t);
-
- /* clear all table memory */
- memset((void *)start, 0, current - start);
-
- acpi_write_rsdp(rsdp, rsdt);
- acpi_write_rsdt(rsdt);
-
- /*
- * We explicitly add these tables later on:
- */
- /* QNX wants an MADT */
- printk_debug("ACPI: * MADT\n");
-
- madt = (acpi_madt_t *) current;
- acpi_create_madt(madt);
- current+=madt->header.length;
- acpi_add_table(rsdt,madt);
-
- printk_info("ACPI: done.\n");
- return current;
-}
-
+/*
+ * Ported to Intel XE7501DEVKIT from Agami Aruma
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * (C) 2005 Stefan Reinauer
+ * (C) 2005 Digital Design Corporation
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <assert.h>
+#include "bus.h"
+#include "ioapic.h"
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ // Not implemented
+ return 0;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned int irq_start = 0;
+ device_t dev = 0;
+ struct resource* res = NULL;
+
+
+ // SJM: Hard-code CPU LAPIC entries for now
+ // Use SourcePoint numbering of processors
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 6);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 7);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 0);
+ current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 1);
+
+
+ // Southbridge IOAPIC
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH3, 0xfec00000, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2#2 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2#2 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+
+ // P64H2#1 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // P64H2#1 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start);
+ irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
+
+ // Map ISA IRQ 0 to IRQ 2
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0);
+
+ // IRQ9 differs from ISA standard - ours is active high, level-triggered
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD);
+
+ return current;
+}
+
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_madt_t *madt;
+
+ /* Align ACPI tables to 16byte */
+ start = ( start + 0x0f ) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ /* QNX wants an MADT */
+ printk_debug("ACPI: * MADT\n");
+
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current+=madt->header.length;
+ acpi_add_table(rsdt,madt);
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
+
diff --git a/src/mainboard/intel/xe7501devkit/auto.c b/src/mainboard/intel/xe7501devkit/auto.c
index 8c635720af..1bd83a3187 100644
--- a/src/mainboard/intel/xe7501devkit/auto.c
+++ b/src/mainboard/intel/xe7501devkit/auto.c
@@ -1,92 +1,92 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c"
-#include "northbridge/intel/e7501/raminit.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/debug.c"
-#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#define SUPERIO_PORT 0x2e
-#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1)
-
-static void hard_reset(void)
-{
- outb(0x0e, 0x0cf9);
-}
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
- /* nothing to do */
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/e7501/raminit.c"
-#include "northbridge/intel/e7501/reset_test.c"
-#include "sdram/generic_sdram.c"
-
-
-// This function MUST appear last (ROMCC limitation)
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .d0f1 = PCI_DEV(0, 0, 1),
- .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
- .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
- },
- };
-
- if (bist == 0)
- {
- // Skip this if there was a built in self test failure
-
- early_mtrr_init();
- enable_lapic();
- }
-
- // Get the serial port running and print a welcome banner
-
- lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- // Halt if there was a built in self test failure
- report_bist_failure(bist);
-
-// print_pci_devices();
-
- // If this is a warm boot, some initialization can be skipped
-
- if (!bios_reset_detected())
- {
- enable_smbus();
-// dump_spd_registers(&memctrl[0]);
-// dump_smbus_registers();
-
-// memreset_setup(); No-op for this chipset
- sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl);
- }
-
- // NOTE: ROMCC dies with an internal compiler error
- // if the following line is removed.
- print_debug("SDRAM is up.\r\n");
-}
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "southbridge/intel/i82801ca/i82801ca_early_smbus.c"
+#include "northbridge/intel/e7501/raminit.h"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/intel/e7501/debug.c"
+#include "superio/smsc/lpc47b272/lpc47b272_early_serial.c"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#define SUPERIO_PORT 0x2e
+#define SERIAL_DEV PNP_DEV(SUPERIO_PORT, LPC47B272_SP1)
+
+static void hard_reset(void)
+{
+ outb(0x0e, 0x0cf9);
+}
+
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+ /* nothing to do */
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#include "northbridge/intel/e7501/raminit.c"
+#include "northbridge/intel/e7501/reset_test.c"
+#include "sdram/generic_sdram.c"
+
+
+// This function MUST appear last (ROMCC limitation)
+static void main(unsigned long bist)
+{
+ static const struct mem_controller memctrl[] = {
+ {
+ .d0 = PCI_DEV(0, 0, 0),
+ .d0f1 = PCI_DEV(0, 0, 1),
+ .channel0 = { (0xa<<3)|0, (0xa<<3)|1, (0xa<<3)|2, 0 },
+ .channel1 = { (0xa<<3)|4, (0xa<<3)|5, (0xa<<3)|6, 0 },
+ },
+ };
+
+ if (bist == 0)
+ {
+ // Skip this if there was a built in self test failure
+
+ early_mtrr_init();
+ enable_lapic();
+ }
+
+ // Get the serial port running and print a welcome banner
+
+ lpc47b272_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ // Halt if there was a built in self test failure
+ report_bist_failure(bist);
+
+// print_pci_devices();
+
+ // If this is a warm boot, some initialization can be skipped
+
+ if (!bios_reset_detected())
+ {
+ enable_smbus();
+// dump_spd_registers(&memctrl[0]);
+// dump_smbus_registers();
+
+// memreset_setup(); No-op for this chipset
+ sdram_initialize(sizeof(memctrl)/sizeof(memctrl[0]), memctrl);
+ }
+
+ // NOTE: ROMCC dies with an internal compiler error
+ // if the following line is removed.
+ print_debug("SDRAM is up.\r\n");
+}
diff --git a/src/mainboard/intel/xe7501devkit/bus.h b/src/mainboard/intel/xe7501devkit/bus.h
index 0a99bb2808..84661ddb36 100644
--- a/src/mainboard/intel/xe7501devkit/bus.h
+++ b/src/mainboard/intel/xe7501devkit/bus.h
@@ -1,17 +1,17 @@
-#ifndef XE7501DEVKIT_BUS_H_INCLUDED
-#define XE7501DEVKIT_BUS_H_INCLUDED
-
-// These were determined by seeing how LinuxBIOS enumerates the various
-// PCI (and PCI-like) buses on the board.
-
-#define PCI_BUS_CHIPSET 0
-#define PCI_BUS_E7501_HI_B 1 // P64H2#2
-#define PCI_BUS_P64H2_2_B 2 // P64H2#2 bus B
-#define PCI_BUS_P64H2_2_A 3 // P64H2#2 bus A
-#define PCI_BUS_E7501_HI_D 4 // P64H2#1
-#define PCI_BUS_P64H2_1_B 5 // P64H2#1 bus B
-#define PCI_BUS_P64H2_1_A 6 // P64H2#1 bus A
-#define PCI_BUS_ICH3 7 // ICH3-S
-#define SUPERIO_BUS 8 // (arbitrary but unique bus #)
-
-#endif // XE7501DEVKIT_BUS_H_INCLUDED
+#ifndef XE7501DEVKIT_BUS_H_INCLUDED
+#define XE7501DEVKIT_BUS_H_INCLUDED
+
+// These were determined by seeing how LinuxBIOS enumerates the various
+// PCI (and PCI-like) buses on the board.
+
+#define PCI_BUS_CHIPSET 0
+#define PCI_BUS_E7501_HI_B 1 // P64H2#2
+#define PCI_BUS_P64H2_2_B 2 // P64H2#2 bus B
+#define PCI_BUS_P64H2_2_A 3 // P64H2#2 bus A
+#define PCI_BUS_E7501_HI_D 4 // P64H2#1
+#define PCI_BUS_P64H2_1_B 5 // P64H2#1 bus B
+#define PCI_BUS_P64H2_1_A 6 // P64H2#1 bus A
+#define PCI_BUS_ICH3 7 // ICH3-S
+#define SUPERIO_BUS 8 // (arbitrary but unique bus #)
+
+#endif // XE7501DEVKIT_BUS_H_INCLUDED
diff --git a/src/mainboard/intel/xe7501devkit/chip.h b/src/mainboard/intel/xe7501devkit/chip.h
index b0885c1a54..12a9127ff2 100644
--- a/src/mainboard/intel/xe7501devkit/chip.h
+++ b/src/mainboard/intel/xe7501devkit/chip.h
@@ -1,6 +1,6 @@
-extern unsigned char _vgarom_start[];
-
-extern struct chip_operations mainboard_intel_xe7501devkit_ops;
-
-struct mainboard_intel_xe7501devkit_config {
-};
+extern unsigned char _vgarom_start[];
+
+extern struct chip_operations mainboard_intel_xe7501devkit_ops;
+
+struct mainboard_intel_xe7501devkit_config {
+};
diff --git a/src/mainboard/intel/xe7501devkit/cmos.layout b/src/mainboard/intel/xe7501devkit/cmos.layout
index 1aa038d34d..57139c1cd5 100644
--- a/src/mainboard/intel/xe7501devkit/cmos.layout
+++ b/src/mainboard/intel/xe7501devkit/cmos.layout
@@ -7,8 +7,8 @@ entries
0 512 r 0 reserved_memory1 # We know nothing about the factory BIOS
512 512 r 0 reserved_memory2 # More factory BIOS
-# Work in progress.
-# This is where we would put the LB RTC_BOOT_BYTE options once the code
+# Work in progress.
+# This is where we would put the LB RTC_BOOT_BYTE options once the code
# supports finding them there.
#1024 1 e 4 boot_option
#1025 1 e 4 last_boot
diff --git a/src/mainboard/intel/xe7501devkit/failover.c b/src/mainboard/intel/xe7501devkit/failover.c
index 68a1fec4eb..5ec12d67cd 100644
--- a/src/mainboard/intel/xe7501devkit/failover.c
+++ b/src/mainboard/intel/xe7501devkit/failover.c
@@ -1,47 +1,47 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "pc80/mc146818rtc_early.c"
-#include "southbridge/intel/i82801ca/cmos_failover.c"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/reset_test.c"
-
-static unsigned long main(unsigned long bist)
-{
- /* Is this a deliberate reset by the bios */
- if (bios_reset_detected() && last_boot_normal()) {
- goto normal_image;
- }
- /* This is the primary cpu how should I boot? */
- else {
-
- check_cmos_failed();
-
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
-#if 0
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
-#endif
- fallback_image:
- return bist;
-}
+#define ASSEMBLY 1
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "pc80/mc146818rtc_early.c"
+#include "southbridge/intel/i82801ca/cmos_failover.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/intel/e7501/reset_test.c"
+
+static unsigned long main(unsigned long bist)
+{
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal()) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else {
+
+ check_cmos_failed();
+
+ if (do_normal_boot()) {
+ goto normal_image;
+ }
+ else {
+ goto fallback_image;
+ }
+ }
+ normal_image:
+ asm volatile ("jmp __normal_image"
+ : /* outputs */
+ : "a" (bist) /* inputs */
+ : /* clobbers */
+ );
+#if 0
+ cpu_reset:
+ asm volatile ("jmp __cpu_reset"
+ : /* outputs */
+ : "a"(bist) /* inputs */
+ : /* clobbers */
+ );
+#endif
+ fallback_image:
+ return bist;
+}
diff --git a/src/mainboard/intel/xe7501devkit/ioapic.h b/src/mainboard/intel/xe7501devkit/ioapic.h
index 6db3d949f6..642c04519f 100644
--- a/src/mainboard/intel/xe7501devkit/ioapic.h
+++ b/src/mainboard/intel/xe7501devkit/ioapic.h
@@ -1,11 +1,11 @@
-// IOAPIC addresses determined by LinuxBIOS enumeration.
-// Someday add functions to get APIC IDs and versions from the chips themselves.
-
-#define IOAPIC_ICH3 2
-#define IOAPIC_P64H2_2_BUS_B 3 // IOAPIC 3 at 01:1c.0 MBAR = fe300000 DataAddr = fe300010
-#define IOAPIC_P64H2_2_BUS_A 4 // IOAPIC 4 at 01:1e.0 MBAR = fe301000 DataAddr = fe301010
-#define IOAPIC_P64H2_1_BUS_B 5 // IOAPIC 5 at 04:1c.0 MBAR = fe500000 DataAddr = fe500010
-#define IOAPIC_P64H2_1_BUS_A 8 // IOAPIC 8 at 04:1e.0 MBAR = fe501000 DataAddr = fe501010
-
-#define P64H2_IOAPIC_VERSION 0x20
-#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-3 and P64-H2
+// IOAPIC addresses determined by LinuxBIOS enumeration.
+// Someday add functions to get APIC IDs and versions from the chips themselves.
+
+#define IOAPIC_ICH3 2
+#define IOAPIC_P64H2_2_BUS_B 3 // IOAPIC 3 at 01:1c.0 MBAR = fe300000 DataAddr = fe300010
+#define IOAPIC_P64H2_2_BUS_A 4 // IOAPIC 4 at 01:1e.0 MBAR = fe301000 DataAddr = fe301010
+#define IOAPIC_P64H2_1_BUS_B 5 // IOAPIC 5 at 04:1c.0 MBAR = fe500000 DataAddr = fe500010
+#define IOAPIC_P64H2_1_BUS_A 8 // IOAPIC 8 at 04:1e.0 MBAR = fe501000 DataAddr = fe501010
+
+#define P64H2_IOAPIC_VERSION 0x20
+#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-3 and P64-H2
diff --git a/src/mainboard/intel/xe7501devkit/irq_tables.c b/src/mainboard/intel/xe7501devkit/irq_tables.c
index c30bf2daf2..0134f3be6d 100644
--- a/src/mainboard/intel/xe7501devkit/irq_tables.c
+++ b/src/mainboard/intel/xe7501devkit/irq_tables.c
@@ -1,74 +1,74 @@
-/* Run checkpir to verify any changes to this table...
- Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx
-*/
-
-#include <arch/pirq_routing.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include "bus.h"
-
-#define UNUSED_INTERRUPT {0, 0}
-#define PIRQ_A 0x60
-#define PIRQ_B 0x61
-#define PIRQ_C 0x62
-#define PIRQ_D 0x63
-#define PIRQ_E 0x68
-#define PIRQ_F 0x69
-#define PIRQ_G 0x6A
-#define PIRQ_H 0x6B
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE,
- PIRQ_VERSION,
- 32 + 12*sizeof(struct irq_info), // Size of this struct in bytes
- 0, // PCI bus number on which the interrupt router resides
- PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router
- 0, // PCI-exclusive IRQ bitmap
- PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router
- PCI_DEVICE_ID_INTEL_82801CA_LPC, // Device ID of compatible PCI interrupt router
- 0, // Additional miniport information
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero
- 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0)
- {
- // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space
- // This was determined from linux-2.6.11/arch/i386/pci/irq.c
- // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15
- // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13
- // Not sure why IRQ9 isn't routable (inherited from Tyan S2735)
-
- // INTA# INTB# INTC# INTD#
- // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu
-
- {PCI_BUS_CHIPSET, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus
- {PCI_BUS_CHIPSET, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, UNUSED_INTERRUPT}, 0, 0}, // USB 1.1
-
- // P64H2#2 Bus A
- {PCI_BUS_P64H2_2_A, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // SCSI
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#2 Bus B
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 23, 0}, // Slot 2A (J23)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(2, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 24, 0}, // Slot 2B (J24)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(3, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 25, 0}, // Slot 2C (J25)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(4, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 12, 0}, // Slot 2D (J12)
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#1 Bus A
- {PCI_BUS_P64H2_1_A, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 20, 0}, // Slot 1A (J20)
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#1 Bus B
- {PCI_BUS_P64H2_1_B, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // GB Ethernet
- {PCI_BUS_P64H2_1_B, PCI_DEVFN(2, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 21, 0}, // Slot 1B (J21)
- // NOTE: Hotplug disabled on this bus
-
- // ICH-3 PCI bus
- {PCI_BUS_ICH3, PCI_DEVFN(0, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // Video
- {PCI_BUS_ICH3, PCI_DEVFN(2, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 11, 0}, // Debug slot (J11)
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
+/* Run checkpir to verify any changes to this table...
+ Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx
+*/
+
+#include <arch/pirq_routing.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include "bus.h"
+
+#define UNUSED_INTERRUPT {0, 0}
+#define PIRQ_A 0x60
+#define PIRQ_B 0x61
+#define PIRQ_C 0x62
+#define PIRQ_D 0x63
+#define PIRQ_E 0x68
+#define PIRQ_F 0x69
+#define PIRQ_G 0x6A
+#define PIRQ_H 0x6B
+
+const struct irq_routing_table intel_irq_routing_table = {
+ PIRQ_SIGNATURE,
+ PIRQ_VERSION,
+ 32 + 12*sizeof(struct irq_info), // Size of this struct in bytes
+ 0, // PCI bus number on which the interrupt router resides
+ PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router
+ 0, // PCI-exclusive IRQ bitmap
+ PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router
+ PCI_DEVICE_ID_INTEL_82801CA_LPC, // Device ID of compatible PCI interrupt router
+ 0, // Additional miniport information
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero
+ 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0)
+ {
+ // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space
+ // This was determined from linux-2.6.11/arch/i386/pci/irq.c
+ // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15
+ // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13
+ // Not sure why IRQ9 isn't routable (inherited from Tyan S2735)
+
+ // INTA# INTB# INTC# INTD#
+ // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu
+
+ {PCI_BUS_CHIPSET, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus
+ {PCI_BUS_CHIPSET, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, UNUSED_INTERRUPT}, 0, 0}, // USB 1.1
+
+ // P64H2#2 Bus A
+ {PCI_BUS_P64H2_2_A, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // SCSI
+ // NOTE: Hotplug disabled on this bus
+
+ // P64H2#2 Bus B
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 23, 0}, // Slot 2A (J23)
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(2, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 24, 0}, // Slot 2B (J24)
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(3, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 25, 0}, // Slot 2C (J25)
+ {PCI_BUS_P64H2_2_B, PCI_DEVFN(4, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 12, 0}, // Slot 2D (J12)
+ // NOTE: Hotplug disabled on this bus
+
+ // P64H2#1 Bus A
+ {PCI_BUS_P64H2_1_A, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 20, 0}, // Slot 1A (J20)
+ // NOTE: Hotplug disabled on this bus
+
+ // P64H2#1 Bus B
+ {PCI_BUS_P64H2_1_B, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // GB Ethernet
+ {PCI_BUS_P64H2_1_B, PCI_DEVFN(2, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 21, 0}, // Slot 1B (J21)
+ // NOTE: Hotplug disabled on this bus
+
+ // ICH-3 PCI bus
+ {PCI_BUS_ICH3, PCI_DEVFN(0, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // Video
+ {PCI_BUS_ICH3, PCI_DEVFN(2, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 11, 0}, // Debug slot (J11)
+ }
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/intel/xe7501devkit/mainboard.c b/src/mainboard/intel/xe7501devkit/mainboard.c
index 38639b9d39..158b0183e2 100644
--- a/src/mainboard/intel/xe7501devkit/mainboard.c
+++ b/src/mainboard/intel/xe7501devkit/mainboard.c
@@ -1,12 +1,12 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include "chip.h"
-
-#if CONFIG_CHIP_NAME == 1
-struct chip_operations mainboard_intel_xe7501devkit_ops = {
- CHIP_NAME("Intel Xeon E7501 DevKit mainboard")
-};
-#endif
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_intel_xe7501devkit_ops = {
+ CHIP_NAME("Intel Xeon E7501 DevKit mainboard")
+};
+#endif
diff --git a/src/mainboard/intel/xe7501devkit/mptable.c b/src/mainboard/intel/xe7501devkit/mptable.c
index 7dae29c450..0da0676d35 100644
--- a/src/mainboard/intel/xe7501devkit/mptable.c
+++ b/src/mainboard/intel/xe7501devkit/mptable.c
@@ -1,180 +1,180 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <assert.h>
-#include "bus.h"
-#include "ioapic.h"
-
-// Generate MP-table IRQ numbers for PCI devices.
-#define INT_A 0
-#define INT_B 1
-#define INT_C 2
-#define INT_D 3
-#define PCI_IRQ(dev, intLine) (((dev)<<2) | intLine)
-
-
-void xe7501devkit_register_buses(struct mp_config_table *mc)
-{
- // Bus ID, Bus Type
- smp_write_bus(mc, PCI_BUS_CHIPSET, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_E7501_HI_B, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_2_B, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_2_A, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_E7501_HI_D, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_1_B, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_P64H2_1_A, BUSTYPE_PCI);
- smp_write_bus(mc, PCI_BUS_ICH3, BUSTYPE_PCI);
- smp_write_bus(mc, SUPERIO_BUS, BUSTYPE_ISA);
-}
-
-void xe7501devkit_register_ioapics(struct mp_config_table *mc)
-{
- device_t dev;
- struct resource *res;
-
- // TODO: Gack. This is REALLY ugly.
-
- // Southbridge IOAPIC
- smp_write_ioapic(mc, IOAPIC_ICH3, 0x20, 0xfec00000); // APIC ID, Version, Address
-
- // P64H2#2 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base);
-
- // P64H2#2 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base);
-
-
- // P64H2#1 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base);
-
- // P64H2#1 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
- if (!dev)
- BUG(); // Config.lb error?
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base);
-}
-
-void xe7501devkit_register_interrupts(struct mp_config_table *mc)
-{
- // Chipset PCI bus
- // Type Trigger | Polarity Bus ID IRQ APIC ID PIN#
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 0);
- smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 1);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_A), IOAPIC_ICH3, 16); // USB 1.1 Controller #1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_B), IOAPIC_ICH3, 17); // SMBus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_C), IOAPIC_ICH3, 18); // USB 1.1 Controller #3
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_C), IOAPIC_ICH3, 18); // IDE
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_D), IOAPIC_ICH3, 19); // USB 1.1 Controller #2
-
- // P64H2#2 Bus B
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_B, 0); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_B, 1); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_C), IOAPIC_P64H2_2_BUS_B, 2); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_D), IOAPIC_P64H2_2_BUS_B, 3); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_2_BUS_B, 4); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_2_BUS_B, 5); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_2_BUS_B, 6); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_2_BUS_B, 7); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_A), IOAPIC_P64H2_2_BUS_B, 8); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_B), IOAPIC_P64H2_2_BUS_B, 9); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_C), IOAPIC_P64H2_2_BUS_B, 10); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_D), IOAPIC_P64H2_2_BUS_B, 11); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_A), IOAPIC_P64H2_2_BUS_B, 12); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_B), IOAPIC_P64H2_2_BUS_B, 13); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_C), IOAPIC_P64H2_2_BUS_B, 14); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_D), IOAPIC_P64H2_2_BUS_B, 15); // Slot 2D (J12)
-
- // P64H2#2 Bus A
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_A, 0); // SCSI
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_A, 1); // SCSI
-
- // P64H2#1 Bus B
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_B, 0); // GB Ethernet
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_1_BUS_B, 4); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_1_BUS_B, 5); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_1_BUS_B, 6); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_1_BUS_B, 7); // Slot 1B (J21)
-
- // P64H2#1 Bus A
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_A, 0); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_1_BUS_A, 1); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_C), IOAPIC_P64H2_1_BUS_A, 2); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_D), IOAPIC_P64H2_1_BUS_A, 3); // Slot 1A (J20)
-
- // ICH-3
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(0, INT_A), IOAPIC_ICH3, 16); // Video
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_A), IOAPIC_ICH3, 18); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_B), IOAPIC_ICH3, 19); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_C), IOAPIC_ICH3, 16); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_D), IOAPIC_ICH3, 17); // Debug slot (J11)
-
- // TODO: Not sure how to handle BT_INTR# signals from the P64H2s. Do we even need to, in APIC mode?
-
- // Super I/O (ISA interrupts)
- smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 0);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 1, IOAPIC_ICH3, 1);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 2);
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 3, IOAPIC_ICH3, 3);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 4, IOAPIC_ICH3, 4);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 6, IOAPIC_ICH3, 6);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 8, IOAPIC_ICH3, 8);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 9, IOAPIC_ICH3, 9);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 12, IOAPIC_ICH3, 12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 13, IOAPIC_ICH3, 13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 14, IOAPIC_ICH3, 14);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 15, IOAPIC_ICH3, 15);
-}
-
-void* smp_write_config_table(void* v)
-{
- static const char sig[4] = MPC_SIGNATURE;
- static const char oem[8] = "INTEL ";
- static const char productid[12] = "XE7501DEVKIT";
- struct mp_config_table *mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
- memset(mc, 0, sizeof(*mc));
-
- memcpy(mc->mpc_signature, sig, sizeof(sig));
- memcpy(mc->mpc_oem, oem, sizeof(oem));
- memcpy(mc->mpc_productid, productid, sizeof(productid));
-
- mc->mpc_length = sizeof(*mc); // initially just the header
- mc->mpc_spec = 0x04; // Multiprocessing Spec V1.4
- mc->mpc_lapic = LAPIC_ADDR;
-
- smp_write_processors(mc);
-
- xe7501devkit_register_buses(mc);
- xe7501devkit_register_ioapics(mc);
- xe7501devkit_register_interrupts(mc);
-
- /* Compute the checksums */
- mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
- mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
- printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
-
- return smp_next_mpe_entry(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr);
- return (unsigned long)smp_write_config_table(v);
-}
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <assert.h>
+#include "bus.h"
+#include "ioapic.h"
+
+// Generate MP-table IRQ numbers for PCI devices.
+#define INT_A 0
+#define INT_B 1
+#define INT_C 2
+#define INT_D 3
+#define PCI_IRQ(dev, intLine) (((dev)<<2) | intLine)
+
+
+void xe7501devkit_register_buses(struct mp_config_table *mc)
+{
+ // Bus ID, Bus Type
+ smp_write_bus(mc, PCI_BUS_CHIPSET, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_E7501_HI_B, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_2_B, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_2_A, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_E7501_HI_D, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_1_B, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_P64H2_1_A, BUSTYPE_PCI);
+ smp_write_bus(mc, PCI_BUS_ICH3, BUSTYPE_PCI);
+ smp_write_bus(mc, SUPERIO_BUS, BUSTYPE_ISA);
+}
+
+void xe7501devkit_register_ioapics(struct mp_config_table *mc)
+{
+ device_t dev;
+ struct resource *res;
+
+ // TODO: Gack. This is REALLY ugly.
+
+ // Southbridge IOAPIC
+ smp_write_ioapic(mc, IOAPIC_ICH3, 0x20, 0xfec00000); // APIC ID, Version, Address
+
+ // P64H2#2 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base);
+
+ // P64H2#2 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base);
+
+
+ // P64H2#1 Bus A IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base);
+
+ // P64H2#1 Bus B IOAPIC
+ dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
+ if (!dev)
+ BUG(); // Config.lb error?
+ res = find_resource(dev, PCI_BASE_ADDRESS_0);
+ smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base);
+}
+
+void xe7501devkit_register_interrupts(struct mp_config_table *mc)
+{
+ // Chipset PCI bus
+ // Type Trigger | Polarity Bus ID IRQ APIC ID PIN#
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, PCI_BUS_CHIPSET, 0, MP_APIC_ALL, 1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_A), IOAPIC_ICH3, 16); // USB 1.1 Controller #1
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_B), IOAPIC_ICH3, 17); // SMBus
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_C), IOAPIC_ICH3, 18); // USB 1.1 Controller #3
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_C), IOAPIC_ICH3, 18); // IDE
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_D), IOAPIC_ICH3, 19); // USB 1.1 Controller #2
+
+ // P64H2#2 Bus B
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_B, 0); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_B, 1); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_C), IOAPIC_P64H2_2_BUS_B, 2); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_D), IOAPIC_P64H2_2_BUS_B, 3); // Slot 2A (J23)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_2_BUS_B, 4); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_2_BUS_B, 5); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_2_BUS_B, 6); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_2_BUS_B, 7); // Slot 2B (J24)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_A), IOAPIC_P64H2_2_BUS_B, 8); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_B), IOAPIC_P64H2_2_BUS_B, 9); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_C), IOAPIC_P64H2_2_BUS_B, 10); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_D), IOAPIC_P64H2_2_BUS_B, 11); // Slot 2C (J25)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_A), IOAPIC_P64H2_2_BUS_B, 12); // Slot 2D (J12)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_B), IOAPIC_P64H2_2_BUS_B, 13); // Slot 2D (J12)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_C), IOAPIC_P64H2_2_BUS_B, 14); // Slot 2D (J12)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_D), IOAPIC_P64H2_2_BUS_B, 15); // Slot 2D (J12)
+
+ // P64H2#2 Bus A
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_A, 0); // SCSI
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_A, 1); // SCSI
+
+ // P64H2#1 Bus B
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_B, 0); // GB Ethernet
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_1_BUS_B, 4); // Slot 1B (J21)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_1_BUS_B, 5); // Slot 1B (J21)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_1_BUS_B, 6); // Slot 1B (J21)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_1_BUS_B, 7); // Slot 1B (J21)
+
+ // P64H2#1 Bus A
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_A, 0); // Slot 1A (J20)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_1_BUS_A, 1); // Slot 1A (J20)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_C), IOAPIC_P64H2_1_BUS_A, 2); // Slot 1A (J20)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_D), IOAPIC_P64H2_1_BUS_A, 3); // Slot 1A (J20)
+
+ // ICH-3
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(0, INT_A), IOAPIC_ICH3, 16); // Video
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_A), IOAPIC_ICH3, 18); // Debug slot (J11)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_B), IOAPIC_ICH3, 19); // Debug slot (J11)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_C), IOAPIC_ICH3, 16); // Debug slot (J11)
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_D), IOAPIC_ICH3, 17); // Debug slot (J11)
+
+ // TODO: Not sure how to handle BT_INTR# signals from the P64H2s. Do we even need to, in APIC mode?
+
+ // Super I/O (ISA interrupts)
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 1, IOAPIC_ICH3, 1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 0, IOAPIC_ICH3, 2);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 3, IOAPIC_ICH3, 3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 4, IOAPIC_ICH3, 4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 6, IOAPIC_ICH3, 6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 8, IOAPIC_ICH3, 8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 9, IOAPIC_ICH3, 9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 12, IOAPIC_ICH3, 12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 13, IOAPIC_ICH3, 13);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 14, IOAPIC_ICH3, 14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE |MP_IRQ_POLARITY_HIGH, SUPERIO_BUS, 15, IOAPIC_ICH3, 15);
+}
+
+void* smp_write_config_table(void* v)
+{
+ static const char sig[4] = MPC_SIGNATURE;
+ static const char oem[8] = "INTEL ";
+ static const char productid[12] = "XE7501DEVKIT";
+ struct mp_config_table *mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+
+ mc->mpc_length = sizeof(*mc); // initially just the header
+ mc->mpc_spec = 0x04; // Multiprocessing Spec V1.4
+ mc->mpc_lapic = LAPIC_ADDR;
+
+ smp_write_processors(mc);
+
+ xe7501devkit_register_buses(mc);
+ xe7501devkit_register_ioapics(mc);
+ xe7501devkit_register_interrupts(mc);
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc));
+
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-17 02:43:43 +0000