diff options
Diffstat (limited to 'src/mainboard/intel/saddlebrook/devicetree.cb')
| -rw-r--r-- | src/mainboard/intel/saddlebrook/devicetree.cb | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/src/mainboard/intel/saddlebrook/devicetree.cb b/src/mainboard/intel/saddlebrook/devicetree.cb new file mode 100644 index 0000000000..7903ddcd39 --- /dev/null +++ b/src/mainboard/intel/saddlebrook/devicetree.cb @@ -0,0 +1,303 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2017 Intel Corporation. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/intel/skylake + + # Enable deep Sx states + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_B" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # FSP Configuration + register "EnableAzalia" = "1" + register "DspEnable" = "1" + register "IoBufferOwnership" = "3" + register "SmbusEnable" = "1" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "InternalGfx" = "1" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "0" + register "Heci3Enabled" = "0" + + register "SaGv" = "3" + register "PmTimerDisabled" = "0" + + # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch + # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s + register "PmConfigSlpS3MinAssert" = "0x02" + + # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s + register "PmConfigSlpS4MinAssert" = "0x04" + + # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s + register "PmConfigSlpSusMinAssert" = "0x03" + + # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s + register "PmConfigSlpAMinAssert" = "0x03" + + # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled + register "SerialIrqConfigSirqEnable" = "0x01" + register "SerialIrqConfigSirqMode" = "0x01" + + # VR Settings Configuration for 5 Domains + #+----------------+-------+-------+-------------+-------------+-------+ + #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | + #+----------------+-------+-------+-------------+-------------+-------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V | + #+----------------+-------+-------+-------------+-------------+-------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x10, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x1C, \ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x88, \ + .voltage_limit = 0x5F0 \ + }" + register "domain_vr_config[VR_RING]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x88, \ + .voltage_limit = 0x5F0, \ + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x8C ,\ + .voltage_limit = 0x5F0 \ + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, \ + .psi1threshold = 0x50, \ + .psi2threshold = 0x14, \ + .psi3threshold = 0x4, \ + .psi3enable = 1, \ + .psi4enable = 1, \ + .imon_slope = 0x0, \ + .imon_offset = 0x0, \ + .icc_max = 0x8C, \ + .voltage_limit = 0x5F0 \ + }" + + register "FspSkipMpInit" = "0" + + # Enable x1 slot + register "PcieRpEnable[7]" = "1" + register "PcieRpClkReqSupport[7]" = "1" + register "PcieRpClkReqNumber[7]" = "3" #uses SRCCLKREQ3 + + # Enable x4 slot + register "PcieRpEnable[8]" = "1" + register "PcieRpClkReqSupport[8]" = "1" + register "PcieRpClkReqNumber[8]" = "4" #uses SRCCLKREQ4 + + # Enable Root port 6 and 13. + register "PcieRpEnable[5]" = "1" + register "PcieRpEnable[12]" = "1" + + # Enable CLKREQ# + register "PcieRpClkReqSupport[5]" = "1" + register "PcieRpClkReqSupport[12]" = "1" + + # RP 6 uses SRCCLKREQ1# while RP `3 uses SRCCLKREQ2# + register "PcieRpClkReqNumber[5]" = "0" + register "PcieRpClkReqNumber[12]" = "1" + + register "EnableLan" = "1" + + # USB related + register "SsicPortEnable" = "1" + register "XdciEnable" = "0" + + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # OTG + register "usb2_ports[1]" = "USB2_PORT_MID(OC3)" # Touch Pad + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # M.2 BT + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Touch Panel + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[5]" = "USB2_PORT_MID(OC0)" # Front Panel + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # Front Panel + register "usb2_ports[7]" = "USB2_PORT_MID(OC2)" # Stacked conn (lan + usb) + register "usb2_ports[8]" = "USB2_PORT_MID(OC2)" # Stacked conn (lan + usb) + register "usb2_ports[9]" = "USB2_PORT_MID(OC1)" # LAN MAGJACK + register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" # LAN MAGJACK + register "usb2_ports[11]" = "USB2_PORT_MID(OC_SKIP)" # Finger print sensor + register "usb2_ports[12]" = "USB2_PORT_MID(OC4)" # USB 2 stack conn + register "usb2_ports[13]" = "USB2_PORT_MID(OC4)" # USB 2 stack conn + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC5)" # OTG + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Flex + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # IVCAM + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" # LAN MAGJACK + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # Stack Conn + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC2)" # Stack Conn + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC1)" # LAN MAGJACK + + register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" # I2C4 is 1.8V + + # Must leave UART0 enabled or SD/eMMC will not work as PCI + + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0a" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + + register "PmTimerDisabled" = "0" + + register "EnableSata" = "1" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ \ + [0] = 1, \ + [1] = 1, \ + [2] = 1, \ + [3] = 1, \ + [4] = 1, \ + [5] = 1, \ + [6] = 1, \ + [7] = 1, \ + }" + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoPci, \ + [PchSerialIoIndexI2C3] = PchSerialIoPci, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoPci, \ + [PchSerialIoIndexSpi0] = PchSerialIoPci, \ + [PchSerialIoIndexSpi1] = PchSerialIoPci, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoPci, \ + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \ + }" + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Enable/Disable VMX feature + register "VmxEnable" = "0" + # Use default SD card detect GPIO configuration + #register "sdcard_cd_gpio_default" = "GPP_A7" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C #0 + device pci 15.1 on end # I2C #1 + device pci 15.2 on end # I2C #2 + device pci 15.3 on end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 19.0 on end # UART #2 + device pci 19.1 on end # I2C #5 + device pci 19.2 on end # I2C #4 + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 off end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 on end # GSPI #0 + device pci 1e.3 on end # GSPI #1 + device pci 1e.4 off end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 off end # SDCard + device pci 1f.0 on + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end |