diff options
Diffstat (limited to 'src/mainboard/intel/kunimitsu')
| -rw-r--r-- | src/mainboard/intel/kunimitsu/devicetree.cb | 38 |
1 files changed, 10 insertions, 28 deletions
diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb index dfba699a94..e377a51c2c 100644 --- a/src/mainboard/intel/kunimitsu/devicetree.cb +++ b/src/mainboard/intel/kunimitsu/devicetree.cb @@ -53,35 +53,17 @@ chip soc/intel/skylake register "PcieRpClkReqNumber[0]" = "1" register "PcieRpClkReqNumber[4]" = "2" - register "PortUsb20Enable[0]" = "1" # Type-C Port 1 - register "PortUsb20Enable[1]" = "1" # Type-C Port 2 - register "PortUsb20Enable[2]" = "1" # Bluetooth - register "PortUsb20Enable[4]" = "1" # Type-A Port (card) - register "PortUsb20Enable[6]" = "1" # Camera - register "PortUsb20Enable[8]" = "1" # Type-A Port (board) + register "usb2_ports[0]" = "USB2_PORT_TYPE_C" # Type-C Port 1 + register "usb2_ports[1]" = "USB2_PORT_TYPE_C" # Type-C Port 2 + register "usb2_ports[2]" = "USB2_PORT_MID" # Bluetooth + register "usb2_ports[4]" = "USB2_PORT_MID" # Type-A Port (card) + register "usb2_ports[6]" = "USB2_PORT_FLEX" # Camera + register "usb2_ports[8]" = "USB2_PORT_LONG" # Type-A Port (board) - #USB Per Port HS Preemphasis Bias - register "Usb2AfePetxiset" = "{0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07}" - #USB Per Port HS Transmitter Bias - register "Usb2AfeTxiset" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" - #USB Per Port HS Transmitter Emphasis - register "Usb2AfePredeemp" = "{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03}" - #USB Per Port Half Bit Pre-emphasis - register "Usb2AfePehalfbit" = "{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" - - register "PortUsb30Enable[0]" = "1" # Type-C Port 1 - register "PortUsb30Enable[1]" = "1" # Type-C Port 2 - register "PortUsb30Enable[2]" = "1" # Type-A Port (card) - register "PortUsb30Enable[3]" = "1" # Type-A Port (board) - - #Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment - register "Usb3HsioTxDeEmphEnable" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" - #USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting - register "Usb3HsioTxDeEmph" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" - #Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment - register "Usb3HsioTxDownscaleAmpEnable" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" - #USB 3.0 TX Output Downscale Amplitude Adjustment - register "Usb3HsioTxDownscaleAmp" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}" + register "usb3_ports[0]" = "USB3_PORT_DEFAULT" # Type-C Port 1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT" # Type-C Port 2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT" # Type-A Port (card) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT" # Type-A Port (board) # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ \ |