diff options
Diffstat (limited to 'src/mainboard/intel/eagleheights')
| -rw-r--r-- | src/mainboard/intel/eagleheights/Config.lb | 212 | ||||
| -rw-r--r-- | src/mainboard/intel/eagleheights/Options.lb | 323 |
2 files changed, 0 insertions, 535 deletions
diff --git a/src/mainboard/intel/eagleheights/Config.lb b/src/mainboard/intel/eagleheights/Config.lb deleted file mode 100644 index ea76cad821..0000000000 --- a/src/mainboard/intel/eagleheights/Config.lb +++ /dev/null @@ -1,212 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Thomas Jourdan <thomas.jourdan@gmail.com> -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -## -## This mainboard requires DCACHE_AS_RAM enabled. It won't work without. -## - -## -## Only use the option table in a normal image -## -default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o -if CONFIG_GENERATE_MP_TABLE object mptable.o end -if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end - -if CONFIG_GENERATE_ACPI_TABLES - object fadt.o - object acpi_tables.o - makerule dsdt.c - depends "$(CONFIG_MAINBOARD)/dsdt.dsl" - action "iasl -p dsdt -tc $(CONFIG_MAINBOARD)/dsdt.dsl" - action "mv $(CURDIR)/dsdt.hex dsdt.c" - end - object ./dsdt.o -end - -if CONFIG_HAVE_HARD_RESET object reset.o end - -if CONFIG_USE_INIT - -makerule ./auto.o - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/auto.c -o $@" -end - -else - -makerule ./auto.inc - depends "$(CONFIG_MAINBOARD)/auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/auto.c -o $@" - action "perl -e 's/\.rodata/.rom.data/g' -pi $@" - action "perl -e 's/\.text/.section .rom.text/g' -pi $@" -end - -end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - ldscript /cpu/x86/car/cache_as_ram.lds -end - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -## -## Setup Cache-As-Ram -## -## Use Intel Core (not Core 2) code for CAR init, any CPU might be used. -mainboardinit cpu/intel/model_6ex/cache_as_ram.inc - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds -end - -### -### O.k. We aren't just an intermediary anymore! -### - -if CONFIG_USE_INIT -initobject auto.o -else -mainboardinit ./auto.inc -end - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/intel/i3100 - device pci_domain 0 on - device pci 00.0 on end # IMCH - device pci 00.1 on end # IMCH error status - device pci 01.0 on end # IMCH EDMA engine - device pci 02.0 on end # PCIe port A/A0 - device pci 03.0 on end # PCIe port A1 - chip southbridge/intel/i3100 - # PIRQ line -> legacy IRQ mappings - register "pirq_a_d" = "0x8b808a8a" - register "pirq_e_h" = "0x85808080" - - device pci 1c.0 on end # PCIe port B0 - device pci 1c.1 off end # PCIe port B1 - device pci 1c.2 off end # PCIe port B2 - device pci 1c.3 off end # PCIe port B3 - device pci 1d.0 on end # USB (UHCI) 1 - device pci 1d.1 on end # USB (UHCI) 2 - device pci 1d.7 on end # USB (EHCI) - device pci 1e.0 on end # PCI bridge - device pci 1f.0 on # LPC bridge - chip superio/intel/i3100 - device pnp 4e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.5 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - end - chip superio/smsc/smscsuperio - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.2 off # Serial Port 4 - io 0x60 = 0x2e8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 2 - end - device pnp 2e.4 off # Serial Port 3 - io 0x60 = 0x3e8 - irq 0x70 = 4 - end - device pnp 2e.7 on # PS/2 Keyboard / Mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - end - device pnp 2e.a off # Runtime registers - io 0x60 = 0x600 - end - end - end - device pci 1f.2 on end # SATA - device pci 1f.3 on end # SMBus - device pci 1f.4 on end # Performance counters - end - end - device apic_cluster 0 on - chip cpu/intel/bga956 - device apic 0 on end - end - end -end - diff --git a/src/mainboard/intel/eagleheights/Options.lb b/src/mainboard/intel/eagleheights/Options.lb deleted file mode 100644 index 3a2e7b68c6..0000000000 --- a/src/mainboard/intel/eagleheights/Options.lb +++ /dev/null @@ -1,323 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; version 2 of -## the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -## MA 02110-1301 USA -## - -# Tables -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_LB_CKS_RANGE_START -uses CONFIG_LB_CKS_RANGE_END -uses CONFIG_LB_CKS_LOC -uses CONFIG_GENERATE_ACPI_TABLES -uses CONFIG_HAVE_MAINBOARD_RESOURCES -# SMP -uses CONFIG_SMP -uses CONFIG_LOGICAL_CPUS -uses CONFIG_AP_IN_SIPI_WAIT -uses CONFIG_MAX_CPUS -uses CONFIG_MAX_PHYSICAL_CPUS -uses CONFIG_IOAPIC -# Image Size -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_FALLBACK_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -# Payload -uses CONFIG_ROM_PAYLOAD -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_COMPRESSED_PAYLOAD_NRV2B -uses CONFIG_PRECOMPRESSED_PAYLOAD -# Build Internals -uses CONFIG_RAMBASE -uses CONFIG_ROMBASE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_USE_INIT -uses CONFIG_USE_PRINTK_IN_CAR -uses CONFIG_XIP_ROM_BASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_HAVE_SMI_HANDLER -uses CONFIG_PCIE_CONFIGSPACE_HOLE -uses CONFIG_MMCONF_SUPPORT -uses CONFIG_MMCONF_BASE_ADDRESS -# -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_PART_NUMBER -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -# Timers -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -# Console -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_VGA -uses CONFIG_VGA_ROM_RUN -uses CONFIG_PCI_ROM_RUN -uses CONFIG_DEBUG -uses CONFIG_VGA -uses CONFIG_PCI_OPTION_ROM_RUN_YABEL -# Toolchain -uses CC -uses HOSTCC -uses CONFIG_CROSS_COMPILE -uses CONFIG_OBJCOPY -# Tweaks -uses CONFIG_GDB_STUB -uses CONFIG_MAX_REBOOT_CNT -uses CONFIG_USE_WATCHDOG_ON_BOOT -uses COREBOOT_EXTRA_VERSION -uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL - -### -### Build options -### - -## -## -default CONFIG_MAX_REBOOT_CNT=3 - -## -## Use the watchdog to break out of a lockup condition -## -default CONFIG_USE_WATCHDOG_ON_BOOT=0 - -## -## ROM_SIZE is the size of boot ROM that this board will use. -## -default CONFIG_ROM_SIZE=1024*1024 - - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT=1 - -## -## Delay timer options -## Use timer2 -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET=1 - -## -## Build SMI handler -## -default CONFIG_HAVE_SMI_HANDLER=0 - -## -## Leave a hole for mmapped PCIe config space -## -default CONFIG_PCIE_CONFIGSPACE_HOLE=1 -default CONFIG_MMCONF_SUPPORT=1 -default CONFIG_MMCONF_BASE_ADDRESS=0xE0000000 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE=1 -default CONFIG_IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default CONFIG_GENERATE_MP_TABLE=1 - -## -## Build code to provide ACPI support -## -default CONFIG_GENERATE_ACPI_TABLES=1 -default CONFIG_HAVE_MAINBOARD_RESOURCES=1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE=1 - -## -## Move the default coreboot cmos range off of AMD RTC registers -## -default CONFIG_LB_CKS_RANGE_START=49 -default CONFIG_LB_CKS_RANGE_END=122 -default CONFIG_LB_CKS_LOC=123 - -#VGA Console -default CONFIG_CONSOLE_VGA=0 -# There are some network option roms that don't work with -# coreboot's x86emu. Thus, we only execute the VGA option rom -# for now: -default CONFIG_VGA_ROM_RUN=0 -default CONFIG_PCI_ROM_RUN=0 -default CONFIG_DEBUG=0 - -#default CONFIG_VGA=0 -#default CONFIG_PCI_OPTION_ROM_RUN_YABEL=0 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=4 -default CONFIG_MAX_PHYSICAL_CPUS=2 -default CONFIG_LOGICAL_CPUS=1 -default CONFIG_AP_IN_SIPI_WAIT=1 - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM=1 -default CONFIG_DCACHE_RAM_SIZE=0x8000 -default CONFIG_DCACHE_RAM_BASE=( 0xfff00000 - CONFIG_DCACHE_RAM_SIZE - 1024*1024) -default CONFIG_USE_PRINTK_IN_CAR=1 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default CONFIG_MAINBOARD_PART_NUMBER="EagleHeights" -default CONFIG_MAINBOARD_VENDOR= "Intel" - -### -### coreboot layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE=0x2000 - -## -## Use a small 32K heap -## -default CONFIG_HEAP_SIZE=0x8000 - - -### -### Compute the location and size of where this firmware image -### (coreboot plus bootloader) will live in the boot rom chip. -### -default CONFIG_FALLBACK_SIZE=CONFIG_ROM_IMAGE_SIZE - -## -## coreboot C code runs at this location in RAM -## -default CONFIG_RAMBASE=0x00100000 - -## -## Load the payload from the ROM -## -default CONFIG_ROM_PAYLOAD=1 -default CONFIG_PRECOMPRESSED_PAYLOAD=1 -default CONFIG_COMPRESSED_PAYLOAD_LZMA=1 -#default CONFIG_COMPRESSED_PAYLOAD_NRV2B=0 - -### -### Defaults of options that you may want to override in the target config file -### - -## -## The default compiler -## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## Disable the gdb stub by default -## -default CONFIG_GDB_STUB=0 - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD=115200 -#default CONFIG_TTYS0_BAUD=57600 -#default CONFIG_TTYS0_BAUD=38400 -#default CONFIG_TTYS0_BAUD=19200 -#default CONFIG_TTYS0_BAUD=9600 -#default CONFIG_TTYS0_BAUD=4800 -#default CONFIG_TTYS0_BAUD=2400 -#default CONFIG_TTYS0_BAUD=1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS=0x3 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=7 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=9 - -## -## Select power on after power fail setting -default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" - -### End Options.lb -end |