diff options
Diffstat (limited to 'src/mainboard/intel/d945gclf')
-rw-r--r-- | src/mainboard/intel/d945gclf/romstage.c | 36 |
1 files changed, 1 insertions, 35 deletions
diff --git a/src/mainboard/intel/d945gclf/romstage.c b/src/mainboard/intel/d945gclf/romstage.c index ba01379548..ada6e61c00 100644 --- a/src/mainboard/intel/d945gclf/romstage.c +++ b/src/mainboard/intel/d945gclf/romstage.c @@ -40,9 +40,6 @@ static void rcba_config(void) RCBA16(D28IR) = 0x3201; RCBA16(D27IR) = 0x0146; - /* Enable IOAPIC */ - RCBA8(OIC) = 0x03; - /* Disable unused devices */ RCBA32(FD) |= FD_INTLAN; @@ -50,35 +47,6 @@ static void rcba_config(void) // RCBA32(0x341c) = 0x00000001; } -static void early_ich7_init(void) -{ - uint8_t reg8; - uint32_t reg32; - - // program secondary mlt XXX byte? - pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); - - // reset rtc power status - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - // usb transient disconnect - reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); - reg8 |= (3 << 0); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); - reg32 |= (1 << 29) | (1 << 17); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); - - reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); - reg32 |= (1 << 31) | (1 << 27); - pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - - ich7_setup_cir(); -} - void mainboard_romstage_entry(void) { int s3resume = 0, boot_mode = 0; @@ -101,6 +69,7 @@ void mainboard_romstage_entry(void) /* Perform some early chipset initialization required * before RAM initialization can work */ + i82801gx_early_init(); i945_early_initialization(); s3resume = southbridge_detect_s3_resume(); @@ -113,9 +82,6 @@ void mainboard_romstage_entry(void) sdram_initialize(s3resume ? 2 : boot_mode, NULL); - /* Perform some initialization that must run before stage2 */ - early_ich7_init(); - /* This should probably go away. Until now it is required * and mainboard specific */ |