diff options
Diffstat (limited to 'src/mainboard/ibm/e326')
| -rw-r--r-- | src/mainboard/ibm/e326/Config.lb | 22 | ||||
| -rw-r--r-- | src/mainboard/ibm/e326/Options.lb | 162 | ||||
| -rw-r--r-- | src/mainboard/ibm/e326/cache_as_ram_auto.c | 6 | ||||
| -rw-r--r-- | src/mainboard/ibm/e326/irq_tables.c | 4 |
4 files changed, 97 insertions, 97 deletions
diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb index 75a6be6c94..92a0c52145 100644 --- a/src/mainboard/ibm/e326/Config.lb +++ b/src/mainboard/ibm/e326/Config.lb @@ -1,5 +1,5 @@ -## XIP_ROM_SIZE must be a power of 2. -default XIP_ROM_SIZE = 64 * 1024 +## CONFIG_XIP_ROM_SIZE must be a power of 2. +default CONFIG_XIP_ROM_SIZE = 64 * 1024 include /config/nofailovercalculation.lb ## @@ -13,22 +13,22 @@ arch i386 end ## driver mainboard.o -if HAVE_MP_TABLE object mptable.o end -if HAVE_PIRQ_TABLE object irq_tables.o end +if CONFIG_HAVE_MP_TABLE object mptable.o end +if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o if CONFIG_USE_INIT makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" end else makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@" + depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" action "perl -e 's/\.rodata/.rom.data/g' -pi $@" action "perl -e 's/\.text/.section .rom.text/g' -pi $@" end @@ -38,7 +38,7 @@ end ## ## Build our 16 bit and 32 bit coreboot entry code ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/entry16.inc ldscript /cpu/x86/16bit/entry16.lds end @@ -56,7 +56,7 @@ mainboardinit cpu/x86/32bit/entry32.inc ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds else @@ -80,7 +80,7 @@ mainboardinit cpu/amd/car/cache_as_ram.inc ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE +if CONFIG_USE_FALLBACK_IMAGE ldscript /arch/i386/lib/failover.lds end diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb index 9a101d1950..8406ecf84b 100644 --- a/src/mainboard/ibm/e326/Options.lb +++ b/src/mainboard/ibm/e326/Options.lb @@ -1,56 +1,56 @@ -uses HAVE_MP_TABLE +uses CONFIG_HAVE_MP_TABLE uses CONFIG_CBFS -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE +uses CONFIG_HAVE_PIRQ_TABLE +uses CONFIG_USE_FALLBACK_IMAGE +uses CONFIG_HAVE_FALLBACK_BOOT +uses CONFIG_HAVE_HARD_RESET +uses CONFIG_IRQ_SLOT_COUNT +uses CONFIG_HAVE_OPTION_TABLE uses CONFIG_MAX_CPUS uses CONFIG_MAX_PHYSICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET +uses CONFIG_FALLBACK_SIZE +uses CONFIG_ROM_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_IMAGE_SIZE +uses CONFIG_ROM_SECTION_SIZE +uses CONFIG_ROM_SECTION_OFFSET uses CONFIG_ROM_PAYLOAD uses CONFIG_ROM_PAYLOAD_START uses CONFIG_COMPRESSED_PAYLOAD_LZMA uses CONFIG_PRECOMPRESSED_PAYLOAD -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR -uses MAINBOARD +uses CONFIG_PAYLOAD_SIZE +uses CONFIG_ROMBASE +uses CONFIG_XIP_ROM_SIZE +uses CONFIG_XIP_ROM_BASE +uses CONFIG_STACK_SIZE +uses CONFIG_HEAP_SIZE +uses CONFIG_USE_OPTION_TABLE +uses CONFIG_LB_CKS_RANGE_START +uses CONFIG_LB_CKS_RANGE_END +uses CONFIG_LB_CKS_LOC +uses CONFIG_MAINBOARD_PART_NUMBER +uses CONFIG_MAINBOARD_VENDOR +uses CONFIG_MAINBOARD uses COREBOOT_EXTRA_VERSION -uses _RAMBASE -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_RAMBASE +uses CONFIG_TTYS0_BAUD +uses CONFIG_TTYS0_BASE +uses CONFIG_TTYS0_LCS +uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL +uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL +uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL uses CONFIG_CONSOLE_SERIAL8250 -uses CROSS_COMPILE +uses CONFIG_CROSS_COMPILE uses CC -uses HOSTCC -uses OBJCOPY +uses CONFIG_HOSTCC +uses CONFIG_OBJCOPY uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN -uses USE_DCACHE_RAM -uses DCACHE_RAM_BASE -uses DCACHE_RAM_SIZE +uses CONFIG_USE_DCACHE_RAM +uses CONFIG_DCACHE_RAM_BASE +uses CONFIG_DCACHE_RAM_SIZE uses CONFIG_USE_INIT uses CONFIG_USE_PRINTK_IN_CAR @@ -60,48 +60,48 @@ uses CONFIG_USE_PRINTK_IN_CAR ### ## -## ROM_SIZE is the size of boot ROM that this board will use. +## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. ## -default ROM_SIZE=524288 +default CONFIG_ROM_SIZE=524288 ## -## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## -default FALLBACK_SIZE=0x40000 +default CONFIG_FALLBACK_SIZE=0x40000 ## ## Build code for the fallback boot ## -default HAVE_FALLBACK_BOOT=1 +default CONFIG_HAVE_FALLBACK_BOOT=1 ## ## Build code to reset the motherboard from coreboot ## -default HAVE_HARD_RESET=1 +default CONFIG_HAVE_HARD_RESET=1 ## ## Build code to export a programmable irq routing table ## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 +default CONFIG_HAVE_PIRQ_TABLE=1 +default CONFIG_IRQ_SLOT_COUNT=9 ## ## Build code to export an x86 MP table ## Useful for specifying IRQ routing values ## -default HAVE_MP_TABLE=1 +default CONFIG_HAVE_MP_TABLE=1 ## ## Build code to export a CMOS option table ## -default HAVE_OPTION_TABLE=1 +default CONFIG_HAVE_OPTION_TABLE=1 ## ## Move the default coreboot cmos range off of AMD RTC registers ## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 +default CONFIG_LB_CKS_RANGE_START=49 +default CONFIG_LB_CKS_RANGE_END=122 +default CONFIG_LB_CKS_LOC=123 ## ## Build code for SMP support @@ -123,45 +123,45 @@ default CONFIG_PCI_ROM_RUN=1 ## ## enable CACHE_AS_RAM specifics ## -default USE_DCACHE_RAM=1 -default DCACHE_RAM_BASE=0xcf000 -default DCACHE_RAM_SIZE=0x1000 +default CONFIG_USE_DCACHE_RAM=1 +default CONFIG_DCACHE_RAM_BASE=0xcf000 +default CONFIG_DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 ## ## Clean up the motherboard id strings ## -default MAINBOARD_PART_NUMBER="E326" -default MAINBOARD_VENDOR="IBM" -#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f -#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 +default CONFIG_MAINBOARD_PART_NUMBER="E326" +default CONFIG_MAINBOARD_VENDOR="IBM" +#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f +#default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 ### ### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default ROM_IMAGE_SIZE = 65536 +## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. +default CONFIG_ROM_IMAGE_SIZE = 65536 ## ## Use a small 8K stack ## -default STACK_SIZE=0x2000 +default CONFIG_STACK_SIZE=0x2000 ## ## Use a small 16K heap ## -default HEAP_SIZE=0x8000 +default CONFIG_HEAP_SIZE=0x8000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE ## ## Coreboot C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default CONFIG_RAMBASE=0x00004000 ## ## Load the payload from the ROM @@ -175,8 +175,8 @@ default CONFIG_ROM_PAYLOAD = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CONFIG_CROSS_COMPILE)gcc -m32" +default CONFIG_HOSTCC="gcc" default CONFIG_USE_PRINTK_IN_CAR=1 @@ -188,21 +188,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1 default CONFIG_CONSOLE_SERIAL8250=1 ## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 +default CONFIG_TTYS0_BAUD=115200 +#default CONFIG_TTYS0_BAUD=57600 +#default CONFIG_TTYS0_BAUD=38400 +#default CONFIG_TTYS0_BAUD=19200 +#default CONFIG_TTYS0_BAUD=9600 +#default CONFIG_TTYS0_BAUD=4800 +#default CONFIG_TTYS0_BAUD=2400 +#default CONFIG_TTYS0_BAUD=1200 # Select the serial console base port -default TTYS0_BASE=0x3f8 +default CONFIG_TTYS0_BASE=0x3f8 # Select the serial protocol # This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 +default CONFIG_TTYS0_LCS=0x3 ## ### Select the coreboot loglevel @@ -214,17 +214,17 @@ default TTYS0_LCS=0x3 ## WARNING 5 warning conditions ## NOTICE 6 normal but significant condition ## INFO 7 informational -## DEBUG 8 debug-level messages +## CONFIG_DEBUG 8 debug-level messages ## SPEW 9 Way too many details ## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 +default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8 ## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 +default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## ## Select power on after power fail setting -default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" +default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" ### End Options.lb # diff --git a/src/mainboard/ibm/e326/cache_as_ram_auto.c b/src/mainboard/ibm/e326/cache_as_ram_auto.c index 872351323d..b036c62f11 100644 --- a/src/mainboard/ibm/e326/cache_as_ram_auto.c +++ b/src/mainboard/ibm/e326/cache_as_ram_auto.c @@ -93,7 +93,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -145,7 +145,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if USE_FALLBACK_IMAGE == 1 +#if CONFIG_USE_FALLBACK_IMAGE == 1 failover_process(bist, cpu_init_detectedx); #endif real_main(bist, cpu_init_detectedx); @@ -183,7 +183,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) init_cpus(cpu_init_detectedx); } - pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE); + pc87366_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); diff --git a/src/mainboard/ibm/e326/irq_tables.c b/src/mainboard/ibm/e326/irq_tables.c index f340a2d31e..cfc28dd0a3 100644 --- a/src/mainboard/ibm/e326/irq_tables.c +++ b/src/mainboard/ibm/e326/irq_tables.c @@ -1,7 +1,7 @@ #include <arch/pirq_routing.h> #include <device/pci.h> -#define IRQ_SLOT_COUNT 12 +#define CONFIG_IRQ_SLOT_COUNT 12 #define IRQ_ROUTER_BUS 0 #define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) #define IRQ_ROUTER_VENDOR 0x1022 @@ -19,7 +19,7 @@ const struct irq_routing_table intel_irq_routing_table = { PIRQ_SIGNATURE, /* u32 signature */ PIRQ_VERSION, /* u16 version */ - 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */ + 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT table entries */ IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ 0x00, /* IRQs devoted exclusively to PCI usage */ |